summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2016-02-11arches: lib: add main_decl.h for main() declarationAaron Durbin
It is silly to have a single header to declare the main() symbol, however some of the arches provided it while lib/bootblock.c relied on the arch headers to declare it. Just move the declaration into its own header file and utilize it. Change-Id: I743b4c286956ae047c17fe46241b699feca73628 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13681 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-02-11soc/apollolake: Add early serial driver for BOOTBLOCK_CONSOLEAndrey Petrov
Early UART driver is for bootblock and romstage. It is supposed to be used when BOOTBLOCK_CONSOLE is enabled. This also adds few configuration bits in bootblock requiered for serial to be set up. Change-Id: I15520d566f107797e68d618885d4379e73d0fa45 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13677 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-11soc/apollolake: Add minimal GPIO driverAndrey Petrov
This adds the minimal functionality needed to configure SoC pads. Change-Id: I2e2268eee2b8c822b42a48a95604b0fab86c9833 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13676 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-02-11soc/apollolake: Add initial cache-as-ram setup for bootblockAlexandru Gagniuc
This is the minimum setup needed to both get cache-as-ram setup and a C environment working. On apollolake, we only get 32 KiB of data loaded into an SRAM that is readonly to the main CPU. Due to this restriction we have to set CAR and a C environment very early on. Change-Id: I65c51f972580609d2c1f03dfe2a86bc5d45d1e46 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13301 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-11util/marvell: Add Marvell doimage utility and dependency in relevant MakefileRuilin Hao
- Add the doimage sources in util/marvell - Add dependency in root makefile - Add dependency in makefile for armada38x soc BUG=chrome-os-partner:47462 TEST=emerge-cyclone coreboot BRANCH=tot Change-Id: I81b30e0865cbd619a41659c3f2819ad3bafc5f24 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4b2a990150580e0b879a346ed8b71b3765b66bab Original-Change-Id: I7e89b5e96206fde97ce69c296850122fd6c858f9 Original-Signed-off-by: Kefei Yao <kfyao@marvell.com> Original-Reviewed-on: https://chromium-review.googlesource.com/318046 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Yuji Sasaki <sasakiy@chromium.org> Reviewed-on: https://review.coreboot.org/13137 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-10Kconfig: Move defaults for CBFS_SIZEMartin Roth
We want the question for CBFS size to be next to the rom size in the mainboard directory, but that doesn't seem to work for how people want to set the defaults. Instead of having the list of exceptions to the size, just set the defaults at the end of kconfig. - Move the defaults for chipsets not setting HAVE_INTEL_FIRMWARE into the chipset Kconfigs (gm45, nehalem, sandybridge, x4x) - Override the default for HAVE_INTEL_FIRMWARE on skylake. - Move the HAVE_INTEL_FIRMWARE default setting into the firmware Kconfig file - Move the location of the default CBFS_SIZE=ROM_SIZE to the end of the top level kconfig file, while leaving the question where it is. Test=rebuild Kconfig files before and after the change, verify that they are how they were intended to be. Note: the Skylake boards actually changed value, because they were picking up the 0x100000 from HAVE_INTEL_FIRMWARE instead of the 0x200000 desired. This was due to the SOC_INTEL_SKYLAKE being after the HAVE_INTEL_FIRMWARE default. Affected boards were: Google chell, glados, & lars and Intel kunimitsu. Change-Id: I2963a7a7eab037955558d401f5573533674a664f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13645 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-10soc/intel/quark: Report CPU infoLee Leahy
Decode the CPU variants and display the CPU info. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Successful if Quark X1000 is displayed Change-Id: I7234a6d81a48cdd02708b80663147e2b09ba979e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13605 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-02-10soc/intel/quark: Call FSP SiliconInitLee Leahy
Optionally relocate FSP into DRAM and then call FSP SiliconInit. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select DISPLAY_FSP_ENTRY_POINTS" * Add "select DISPLAY_HOBS" * Optionally add "select RELOCATE_FSP_INTO_DRAM" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * FSP entry points are displayed and * The message "FspSiliconInit returned 0x00000000" is displayed and * The HOBs are displayed correctly and * The message "ERROR - Missing one or more required FSP HOBs!" is not displayed Change-Id: I91e660ea373a8bb00fc97fe8b760347cbfa96b1e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13631 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-10soc/intel/quark: MTRR supportLee Leahy
Add the SoC specific routines to access the MTRR registers. These registers exist in the host bridge and are not accessible via the rdmsr/wrmsr instructions. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select DISPLAY_MTRRS" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * The message "FSP TempRamInit successful" is displayed Change-Id: I7c124145429ae1d1365a6222a68853edbef4ff69 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13530 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-02-10soc/fsp_baytrail: Add support for FSP MR 005Ben Gardner
Baytrail FSP MR 005 adds two new fields: AutoSelfRefreshEnable APTaskTimeoutCnt Add the device tree definitions. Change-Id: I12e2a8b0b5cbeb6b7289cf91f65b25e73007a8de Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12973 Tested-by: build bot (Jenkins) Reviewed-by: York Yang <york.yang@intel.com>
2016-02-10soc/intel/quark: FSP MemoryInit SupportLee Leahy
Add a dummy fill_power_state routine so that execution is able to reach FSP MemoryInit. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select DISPLAY_HOBS" * Add "select DISPLAY_UPD_DATA" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * MemoryInit returns 0 (success) and * The the message "ERROR - Coreboot's requirements not met by FSP binary!" is not displayed Change-Id: I2a116e1e769ac09915638aa9e5d7c58a4aac3cce Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13447 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-09rockchip/rk3288: UART uses 32bit wide registersPatrick Georgi
Change-Id: I084eb4694a2aa8f66afc1f3148480608ac3ff02b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13635 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-09intel/skylake: Add gpio macro for unused GPIO pinsdavid
Unused PINS will be controlled by GPIO controller (PMODE = GPIO) and GPIO TX/RX will be disabled. BUG=none BRANCH=none TEST=Build and boot lars Change-Id: I3a6fcd2f3462e8e0d1273aa80b1599b76b160825 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 889bfd66dbc918e9fb0ba1b95b63fd7a3bf180d9 Original-Change-Id: I3bf4aa8599255e5382d99810b4c83b4c97c648b6 Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319964 Original-Commit-Ready: David Wu <david_wu@quantatw.com> Original-Tested-by: David Wu <david_wu@quantatw.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/13628 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09soc/intel/quark: Enable Serial PortLee Leahy
Add the code to enable debug serial output using HSUART1: * Enable the code using Kconfig value ENABLE_BUILTIN_HSUART1 * Note that the BIST value is always zero as validated in esram_init.inc * The initial TSC value is currently not saved! Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if serial output is present on HSUART1 at 115200 baud, 8-bit, no parity Change-Id: I7e6181e8b9bc901c3ab236f0b56534850bb6bfd0 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13445 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-02-09nhlt: add api to override oem_id and oem_table_id of acpi_header_tFang, Yang A
This patch added nhlt_soc_serialize_oem_overrides and nhlt_serilalize_oem_overrides to be able to override oem_id and oem_table_id.board file can pass specific string by calling nhlt_soc_serialize_oem_overrides kernel use these two fields to construct a topology binary name if the designate file is not found a default dfw_sst.bin will be used it is optional. BUG=chrome-os-partner:49570 BRANCH=glados TEST=Build & Booted kunimitsu board. Verified that kernel can read new strings. Change-Id: I00b64fb8bb63de601d3116e0b8941057c1efa230 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 374ce08b2d8a2f4e5dd7f51eacb505dbb77fd171 Original-Change-Id: I03623c8ac81efb5a5ea3ec9c6cd604d2e9294022 Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/322860 Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com> Original-Tested-by: Yang Fang <yang.a.fang@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13602 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09chromeos: Remove CONFIG_VBNV_SIZE variableDuncan Laurie
The VBNV region size is determined by vboot and is not really configurable. Only the CMOS implementation defined this config variable so switch it to use VBNV_BLOCK_SIZE defined by vboot in vbnv_layout.h instead. This requires updating the broadwell/skylake cmos reset functions to use the right constant. BUG=chrome-os-partner:47915 BRANCH=glados TEST=manually tested on chell Change-Id: I45e3efc2a22efcb1470bbbefbdae4eda33fc6c96 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e2b803ff3ac30ab22d65d1e62aca623730999a1d Original-Change-Id: I4896a1a5b7889d77ad00c4c8f285d184c4218e17 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324520 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13598 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-08soc/intel/quark: Add TempRamInit supportLee Leahy
Successfully invoke TempRamInit from the FSP binary: * Don't relocate the FSP binary image * Copy the FSP binary into ESRAM * Specify Kconfig values to easily debug ESRAM and TempRamInit code * Specify the FSP binary file location * Specify the FSP binary image ID * Specify where in the flash image the FSP image must reside * Specify the FSP data file location * Specify where to place the FSP data file in the flash image * Specify where in the ESRAM the FSP image must reside Test 1 on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select ENABLE_DEBUG_LED_FINDFSP" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if the SD LED is on indicating that the FSP.bin file was properly located, The test fails if the SD LED is flashing. Test 2 on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Remove "select ENABLE_DEBUG_LED_FINDFSP" * Add "select ENABLE_DEBUG_LED_TEMPRAMINIT" * Testing is successful if the SD LED is on indicating that the FSP.bin file was properly located, The test fails if the SD LED is flashing. Change-Id: I1e2e413a8573f750c611b0f9df101b2c869a789e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13443 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-08soc/intel/quark: Enable ESRAMLee Leahy
The Quark SoC uses ESRAM instead of cache-as-RAM. This code requires that utils/xcompile/xcompile change the machine architecture from i686 to i586 to ensure that the Quark does not attempt to execute unsupported instructions: * Adjust Makefile.inc to add the RMU to the coreboot image * Add code to enable the ESRAM Directly use the QuarkSocPkg/QuarkNorthCluster/Include/QuarkNcSocId.h file from the EDK2 tree (https://github.com/tianocore/edk2.git) to enable easy differences and correct issues in coreboot that were found in EDK2. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_RMU_FILE" * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Remove power from the board * Apply power to the board * Testing is successful if the SD LED is on indicating that the end of esram_init.inc was reached Change-Id: I91d919da144bb72a5d4c4a8050ffab256632a395 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13440 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-04intel/skylake: disable ACPI PM Timer to enable XTAL OSC shutdownArchana Patni
Keeping ACPI PM timer alive prevents XTAL OSC shutdown in S0ix which has a power impact. Based on a DT variable, this patch disables the ACPI PM timer late in the boot sequence - disabling earlier will lead to a hang since the FSP boot flow needs this timer. This also hides the ACPI PM timer from the OS by removing from FADT table. Once the ACPI PM timer is disabled, TCO gets switched off as well. BRANCH=none BUG=chrome-os-partner:48646 TEST=Build for skylake board with the PmTimerDisabled policy in devicetree set to 1. iotools mmio_read32 0xfe0000fc should return 0x2. cat /sys/devices/system/clocksource/clocksource0/available_clocksource should list only "tsc hpet". acpi_pm should be removed from this list. Change-Id: Icfdc51bc33b5190a55196d67e18afdaaa2f9b310 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 18bcb8a434b029295e1f1cc925e2b47e79254583 Original-Change-Id: Ifebe8bb5a7978339e07e4e12e174b9b978135467 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319361 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13588 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/skylake: unconditionally set SPI controller BARAaron Durbin
The setting of the SPI controller BAR was conditional on the nominal frequency being set. Therefore, that doesn't mean the SPI BAR is set on all boots. Move the setting of the BAR in the southbridge_bootblock_init() which is called prioer to cpu_bootblock_init(). BUG=chrome-os-partner:44827 BRANCH=None TEST=Confirmed spibar is always set on glados. Change-Id: Ia58447d70f5e39a4336d4d08593f143332de833a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 56fff7c25c2eb0ccd90e08f71c064b83c66640f8 Original-Change-Id: I1e0cff783f4b072b80589a3a84703a262b86be3a Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/319461 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13587 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/skylake: implement vboot_platform_prepare_reboot()Aaron Durbin
In order to not reboot loop in the face of failed vboot verification on resume set the PM1 control register to indicate S5. After the subsequent cold reset the PM1 control register will indicate S5 as it should. BUG=chrome-os-partner:46049 BRANCH=glados TEST=On chell injected failed vboot verification. Ensured a reboot loop doesn't ensue. Change-Id: Ie5e9e3f6441a217a5e02b4d78aaf21f8249b8a43 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a63b57d7bc59bcaf5518f7cc4afccd3d5da6df1c Original-Change-Id: I5e467854bf065a138bd46e476a7e7088f51454ca Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/323504 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13579 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/skylake: implement vboot_platform_is_resuming()Aaron Durbin
To allow skylake platforms to run with verified memory init code the chipset needs to implement vboot_platform_is_resuming() so that the vboot code can make proper decisions. BUG=chrome-os-partner:46049 BRANCH=glados TEST=Suspended and resumed on chell. Also, tested with an EC build which returns a bad hash to ensure that is properly caught. Change-Id: I508a339c07dcc9e7c56a0df4201660827b3ae07a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a3e11789339bcd8fc8fc99b704c6a1110acf5302 Original-Change-Id: I40264019eb28e85795258112c720056a6a3fc523 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/323503 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13578 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/skylake: Display ME firmware status before os bootDhaval Sharma
Display ME firmware status before os boot. Specifically this patch reads out the ME hfsts1 and hfsts2 status registers that provide information about overall ME health before device gets disabled. This change reused most of the code from bdw me_status implementation. BUG=chrome-os-partner:47384 BRANCH=glados TEST=Builds and Boots on FAB4 SKU2/3. Can observe me status table Change-Id: Ia511c4f336d33a6f3b49a344bfbaea6ed227ffeb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a9d0fb411c3921654f0fdcea2a3d4ee601987af2 Original-Change-Id: Ied7e2dcd9a1298a38dfe1eda9296b9ca8eccf6b1 Original-Credits-to: Duncan Laurie <dlaurie@chromium.org> Original-Signed-off-by: Dhaval Sharma <dhaval.v.sharma@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/323260 Original-Commit-Ready: dhaval v sharma <dhaval.v.sharma@intel.com> Original-Tested-by: dhaval v sharma <dhaval.v.sharma@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13573 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04soc/intel/quark: Add minimal Quark SoC X1000 filesLee Leahy
Add the files for minimal Quark X1000 SoC support: * Declare pei_data structure * Declare sleep states and chipset_power_state structure * Specify top of memory * Empty FspUpdVpd.h file TEST=None Change-Id: If741f84904394780e1f29bd6ddbd81514c3e21c9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13439 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04soc/marvell/armada38x: Add i2c driver for armada38xRuilin Hao
Port i2c driver from uboot to coreboot BUG=chrome-os-partner:47462 TEST=emerge-cyclone coreboot BRANCH=tot Change-Id: I8ce2a965acaed68ad0f0518648490ec471c6810b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4c2e9592662787ebed1d0aa8cafaa00fd12c2e9c Original-Change-Id: If791228edf29405fa4b2f959a21510bd7da9865b Original-Signed-off-by: Ruilin Hao <rlhao@marvell.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313342 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/13113 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04soc/marvell/armada38x: Add gpio driver for armada38xRuilin Hao
Port gpio driver from uboot to coreboot BUG=chrome-os-partner:47462 TEST=None BRANCH=tot Change-Id: Ib6cfbb6e44cb642c7af937778076a51d405ff4a2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5cf94502faad96147d4a4adb42eb13edb64a6439 Original-Change-Id: Ia2e081a85347e2fc8bb365ca527ee2ee32af86f1 Original-Signed-off-by: Ruilin Hao <rlhao@marvell.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313341 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Yuji Sasaki <sasakiy@chromium.org> Reviewed-on: https://review.coreboot.org/13112 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04soc/marvell/armada38x: Add spi driver for armada38xRuilin Hao
Port spi driver from uboot to coreboot BUG=chrome-os-partner:47462 TEST=None BRANCH=tot Change-Id: I747be7001f4cfb8eec33e8e5bdef3fe5bb0eb2ca Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9fbc5c2feb6ffacb54ed94e5c7b94b38be2b2ded Original-Change-Id: Ibea9a050ac8bdab6ce4eeb07accde53aeadade5f Original-Signed-off-by: Ruilin Hao <rlhao@marvell.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313340 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Yuji Sasaki <sasakiy@chromium.org> Reviewed-on: https://review.coreboot.org/13111 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04soc/marvell/armada38x: Add generic support for armada38xRuilin Hao
Skeleton for soc armada38x BUG=chrome-os-partner:47462 TEST=None BRANCH=tot Change-Id: I76f631ee6cdfc90c44727cb20aa960796bc785a5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e91cc19468325f005c6ac920bbe27a174c409727 Original-Change-Id: Iac5fc34df1ba18b4515029aa2fcff8f78a5df191 Original-Signed-off-by: Ruilin Hao <rlhao@marvell.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313179 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Kan Yan <kyan@google.com> Reviewed-on: https://review.coreboot.org/13110 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-02soc/intel/common: Use SoC specific routine to read/write MTRRsLee Leahy
The registers associated with the MTRRs for Quark are referenced through a port on the host bridge. Support the standard configurations by providing a weak routines which just do a rdmsr/wrmsr. Testing: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select DISPLAY_MTRRS" * Add "select HAVE_FSP_PDAT_FILE" * Add "select HAVE_FSP_RAW_BIN" * Add "select HAVE_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * The MTRRs are displayed and * The message "FspTempRamExit returned successfully" is displayed TEST=Build and run on Galileo Change-Id: If2fea66d4b054be4555f5f172ea5945620648325 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13529 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-02Kconfig: indent with tabs, not spaces.Martin Roth
Change-Id: I8996f8ab739a07014a4189738b5624485d752d9d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13540 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-31drivers/intel/fsp1_1: Fix spelling error in API and copyrightLee Leahy
Change granluarity to granularity. Change wacbmem_entryanty to warranty. Update copyright dates. TEST=None Change-Id: Ib7775cb33616751760919a5850777dc6f77a6be9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13528 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-30soc/intel: Add skeleton infrastructure for Apollolake SOCAlexandru Gagniuc
This is the very very minimum needed to compile the code. Change-Id: I7f9e5f564181071591a4640019f59f91a4c456c6 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/13297 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-29soc/braswell: Fix Global NVS base addressHannah Williams
TEST=Boot to OS Signed-off-by: Hannah Williams <hannah.williams@intel.com> Change-Id: I9b43eb4f6f7af62a8a0bbe7bfa08feee1eaca24e Reviewed-on: https://review.coreboot.org/13506 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29src/: Chmod 644 all .c, .h, .asl, .inc, .cb, .hex, & Kconfig filesMartin Roth
Some trivial cleanup. Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13427 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-29intel/skylake: Implement native Cache-as-RAM (CAR)Subrata Banik
Now coreboot should do BIOS CAR setup along with NEM mode setup. This patch also provides a mechanism to use 16MB code caching benefit although LLC still limited to 1M/1.5M based on SOC LLC limit. Here with unlimited cache line gets replaced. Now we could use unlimited cache size along with well defined data size [pg: updated to current upstream #defines] BUG=chrome-os-partner:48412 BRANCH=glados TEST=Builds and Boots on FAB4 SKU2/3. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: pchandri <preetham.chandrian@intel.com> Signed-off-by: Dhaval Sharma <dhaval.v.sharma@intel.com> Change-Id: I96a9cf3a6e41cae9619c683dca28ad31dcaa2536 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2ec51f15c874ad2f1f4fad52fa8deced7b27a24b Original-Change-Id: Id62c15799d98bc27b5e558adfa7c7b3468aa153a Original-Reviewed-on: https://chromium-review.googlesource.com/320855 Original-Commit-Ready: Subrata Banik <subrata.banik@intel.com> Original-Tested-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13138 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell: Add interface to program USB2_COMPBG registershkim
Add interface to program USB2_COMPBG register to set HS_DISC_BG and HS_SQ reference voltage for each project. TEST=Get build success and do EFT test Original-Reviewed-on: https://chromium-review.googlesource.com/300846 Original-Reviewed-by: Shawn N <shawnn@chromium.org> Original-Tested-by: shkim <sh_.kim@samsung.com> Change-Id: If2201829e1a16b4f9916547f08c24e9291358325 Signed-off-by: Kenji Chen <kenji.chen@intel.com> Signed-off-by: shkim <sh_.kim@samsung.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12739 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell/acpi/DPTF: Write TCHG state on AC connect.Jenny TC
DPTF should update the charger cooling device state during boot time and every 3 seconds after boot. But 3 seconds polling doesn't seems to be working with current version of DPTF. This impacts charging since DPTF writes states 4 when charger is not connected at boot time. On connecting the charger, DPTF doesn't write 0 to enable charging. This issue is addressed by calling the PPPC function to read cooling device state and passing the value to SPPC to set cooling device state. This doesn't compromise safety since DPTF can override this value later based on the platform thermal condition. Also this provides additional safety measure in the unlikely event that DPTF crashes and is not re-spawned by OS. With this patch even after DPTF crashes, if the power adapter is plugged it would still allow the system to charge correctly. Original-Reviewed-on: https://chromium-review.googlesource.com/288460 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Jenny Tc <jenny.tc@intel.com> Change-Id: I50c7666b86e45d5ab537a9d4149e6c71eba04e50 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12729 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell/acpi: Fix CID1 offset in commentHannah Williams
Signed-off-by: Hannah Williams <hannah.williams@intel.com> Change-Id: I9fd2ebba985362fe8068c10390bb014cf9015ac5 Reviewed-on: https://review.coreboot.org/13483 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell: Fix issues found during static code analysisRavi Sarawadi
TEST=Build, boot to OS Original-Reviewed-on: https://chromium-review.googlesource.com/299483 Original-Reviewed-by: Aaron Durbin <adurbin@google.com> Change-Id: I738003b8dfff6a5255085d39e378e18d6ad36bcf Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/12738 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28Braswell: Separate L1 Sub State init procedure for boards.Kenji Chen
Original-Reviewed-on: https://chromium-review.googlesource.com/312743 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com> Change-Id: Ib0a891f229477cf359bff6cd02f305606468f07f Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Kenji Chen <kenji.chen@intel.com> Reviewed-on: https://review.coreboot.org/12750 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28Strago: Enable CA MirrorShobhit Srivastava
Configuring UPD PcdCaMirrorEn. This is a board specific parameter. CA mirror is the Command Address mirroring option that is enabled on this board CQ-DEPEND=CL:13038 Original-Reviewed-on: https://chromium-review.googlesource.com/309190 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I05174e18d650332d838e5036c713e91c4840ee75 Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12749 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell: Disable SD card detect simulation in FSPDivya Sasidharan
CQ-DEPEND=CL:13038 Debounce for SD card detect takes a long time and thus affects boot time. Disabling SD card detect simulation in FSP through UPD Original-Reviewed-on: https://chromium-review.googlesource.com/311850 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Change-Id: Iab0794ec058460df94f6bbed5c9b0911e57e3a71 Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com> Reviewed-on: https://review.coreboot.org/12742 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell: Set max frequency to be turbo frequencyHannah Williams
In set_max_freq, instead of using ratio from IA_CORE_RATIOS, using ratio from MSR_IACORE_TURBO_RATIOS Also, punit_init needs to be called before enabling this frequency. Original-Reviewed-on: https://chromium-review.googlesource.com/295268 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Change-Id: Iabdab9ec45f8eef0a105a5a05dbcdb997b6764b0 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12736 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28soc/braswell: Fix DSP clockfdurairx
The codec clock frequency was incorrectly set to 25MHz. The only available frequency is 19.2MHz through external clock and PLL. Original-Reviewed-on: https://chromium-review.googlesource.com/295768 Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I9bef334a5a3aaee28fcc4937180896ff49969bc5 Signed-off-by: Felix Durairaj <felixx.durairaj@intel.com> Reviewed-on: https://review.coreboot.org/12732 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28drivers/intel/fsp1_1: Remove extra include referencesLee Leahy
Remove include references to the soc include directory which are not required to build the FSP driver. Remove "duplicate" include file definitions from file that include fsp/romstage.h. Move the definition of fill_power_state into soc/pm.h to ensure it is still available. TEST=Build and run on Galileo Change-Id: Ie519b3a8da8c36b47da512d3811796eab62ce208 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13436 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-01-27soc/braswell: Fix leakage on V1P8S railShobhit Srivastava
Tristate MMC1_RCLK pin to fix leakage on V1P8S rail. Original-Reviewed-on: https://chromium-review.googlesource.com/292043 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Divagar Mohandass <divagar.mohandass@intel.com> Change-Id: I76cc9211ba93b2596d3c0d772d99f8934656e01c Signed-off-by: Shobhit Srivastava <shobhit.srivastava@intel.com> Reviewed-on: https://review.coreboot.org/12730 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-01-27soc/braswell: Add macro NATIVE_INT_PU20KHannah Williams
Change-Id: I04db02d37a76f0643a73ae4d67b839e5cd61f7e3 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/13054 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-01-26Braswell: Implement Gpio library functions to read RAMIDSubrata Banik
Added GPIO library code to allow all BSW board specific code to use memory configuration GPIOs in GPIO Input mode and read them to determine which memory type is on the board. Also added other GPIO related APIs to support GPIO access in BSW. Original-Reviewed-on: https://chromium-review.googlesource.com/294893 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Idd65136c0449f0cdebfae12a510985e29889fa2b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12735 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-22mediatek/mt8173: revise cbmem_topCC Ma
Support memory range querying to above/below 4GiB. Enable PRERAM_CBMEM_CONSOLE. BRANCH=none BUG=none TEST=build and verified pass on oak board Change-Id: If12ab2e9b8a129e2c82dd97b0493d9abdd6985a9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 139a3163ca867ec5676c6cb81fdec724c99a4a99 Original-Change-Id: Ie190f86f49ae88671f0738e2d6ceafdad58a93cc Original-Signed-off-by: CC Ma <cc.ma@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292559 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13098 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-22mediatek/mt8173: move rtc_boot() to romstageYidi Lin
BRANCH=none BUG=none TEST=boot to kernel Change-Id: I0630d7c172e97f81abb1722afe028542e9e7f106 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 608c66df0543c76be7e811b06718464776631b55 Original-Change-Id: I03426085121bfa44c99c351d63db28f567d0ee1d Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313969 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13097 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-22 06:06:56 +0000