summaryrefslogtreecommitdiff
path: root/src/southbridge/amd
AgeCommit message (Collapse)Author
2011-02-15SERIAL_POST was renamed to CONSOLE_POST a while agoStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6362 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14Removed LPC DMA Deadlock workaround...Josef Kellermann
Setting bit#21 in k8_f0#68 is part of the errata#169 which is handled in amdk8/coherent.c Signed-off-by: Josef Kellermann <seppk@arcor.de> Acked-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6354 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14 This code provides southbridge initialization for SB800 south bridges. It ↵Frank Vibrans
is dependent on the AMD CIMx/SB800 code. Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6346 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-12Attached patch fixes the LPC decode ranges of SB600/SB800. We enable early ↵Rudolf Marek
only Serial/SIO/RTC. Everything else needs to be done by lpc.c Problem was that early settings survived, because the lpc.c is doing ORs only... Hence we decode quite a lot and even strange ranges like IO port 0x4600 etc... Also, if some port which does not fit to predefined set is requested, like 0x290 for Hardware monitor, the wide port is done, but in our case it has range 512 bytes which means we decode in fact 0x290 - 0x490. And if we hit GPU in the 0x3bx range I receive MCE exception if I do isadump -f 0x300 which is bad. Therefore If I detect that the requested range is small (16 bytes) I additionally set the small wide io region so only 16 bytes is decoded. While at it, I fix spelling typos and I init the regs so we don't write random garbage to regs even if we don't enable them later. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6343 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-10RS690: Provide support for MMCONF.Josef Kellermannseppk
If enabled, set up 0xe0000000..0xf0000000 as MMCONF area. Must still be configured in per-board ACPI for the OS to pick it up, so it's disabled by default. Signed-off-by: Josef Kellermann<seppk@arcor.de> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6341 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-03Fix subvendor/subdevice programming on RS690Josef Kellermann
Some RS690 devices require subvendor/subdevice IDs to be programmed at locations other than default 0x2c. Signed-off-by: Josef Kellermann <seppk@arcor.de> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6330 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-28Attached patch fixes the LPC decode ranges of SB700. We enable early only ↵Rudolf Marek
Serial/SIO/RTC. Everything else needs to be done by lpc.c Problem was that early settings survived, because the lpc.c is doing ORs only... Hence we decode quite a lot and even strange ranges like IO port 0x4600 etc... Also, if some port which does not fit to predefined set is requested, like 0x290 for Hardware monitor, the wide port is done, but in our case it has range 512 bytes which means we decode in fact 0x290 - 0x490. And if we hit GPU in the 0x3bx range I receive MCE exception if I do isadump -f 0x300 which is bad. Therefore If I detect that the requested range is small (16 bytes) I additionally set the small wide io region so only 16 bytes is decoded. While at it, I fix spelling typos and I init the regs so we don't write random garbage to regs even if we don't enable them later. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6316 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-28Fix Bimini buildStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6307 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-27Trivial. Re-indent the code.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6301 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-27Set the phy via weak function.Zheng Bao
As Rudolf called. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6300 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-25Set the SB800 SATA PHY correctly.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6297 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-24Change fadt revision back to 3.Zheng Bao
The AcpiPmaCntBlk have to be set. Further research is needed to find out why. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6293 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-21Now bimini can boot linux to login.Zheng Bao
Note: 1. bimini_fam10/Kconfig: Set GENERATE_MP_TABLE in Kconfig. This will make sure the smp_write_config_table will run. Then intr_data will be written into 0xC00/0xC01. 2. bootblock: Use PCI_DEV(0, 0x14, 3) instead of pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB800_LPC), 0). The pci_locate_device will cause the system crash. 3. fadt.c: Change fadt revision to 1. 3 will cause the linux hang. Why? 4. early_setup.c: pmio 0x65 has change its meaning. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6288 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-20S3 feanture of SB800. Compiliant with SB700.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6280 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-20Move some board specific functions to sb800.h.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6279 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-20This sb800 code is derived from sb700.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6277 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-18remove the code which is not ready to release.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6264 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-18remove the code which is not ready to release.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6263 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-12drop unused filesStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6249 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-11change a readable way to fix SB800 CIMX "multi-character constant warning".Kerry She
by using 'Int32FromChar' macro, instead of the ASCII code. Signed-off-by: Kerry She <kerry.she@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6248 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-01src/southbridge/amd/cimx_wrapper: Run dos2unix on the files.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6237 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-01AMD SB800: Drop component prefix from filenames.Uwe Hermann
We did the same with other chipsets in r6150. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6236 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-01Add AMD SB800 southbridge support via cimx_wrapper.Kerry She
Signed-off-by: Kerry She <Kerry.she@amd.com> Acked-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6230 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-31Add RS785(RS880) support. Just few pci_ids.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6227 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-30Remove duplicated GX2 processor IIOC mode setting on CS5535 southbridge codeNils Jacobs
and fix CIS mode comments. Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6225 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-29-Change the remaining GLIU1 port 5 register names from VIP (Video Input Port)Nils Jacobs
to FG (FooGlue). As the GX2 has no VIP port. -Change the Memmory setup MSR register names so they correspond better to the databook. (Part1) This is less confusing for beginners. -Add a MSR printing function to northbridge.c like in the Geode LX code. -Remove the AES register names.(GX2 has no AES registers) -Delete some unused code. -Clean up GX2 northbridge code to match Geode LX code. -Add missing copyright header to northbridge.c. -Move hardcoded IRQ defining from northbridge.c to irq_tables.c . Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6221 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-29-Clean up some comments.Nils Jacobs
-Remove some white spaces. -Remove some leading zeros. -Fix a typo in LX code. Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6219 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-14Set the ROMSIZE as 4MB.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6178 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-13Following patch adds support for suspend/resume functions. I had to change ↵Rudolf Marek
the get_cbmem_toc because macro magic did not work well. The writes to NVRAM are not used in asrock board (k8 pre rev f) but they should work when used with am2 boards. In fact maybe the suspend will work on mahogany or others ;) - with some simple patch which follows for asrock. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6173 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-11I was bitten by the rename, this is part of r6165.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6166 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-11Following patch makes just one fadt.c file. For SB700.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6165 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-10Add TINY_BOOTBLOCK support for AMD SB700.Uwe Hermann
Factor out the ROM decode enable functionality into bootblock.c and handle it via the usual TINY_BOOTBLOCK mechanism. Use "select TINY_BOOTBLOCK" in the southbridge, not individual boards. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6159 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-09Merge enable_rom.c files into bootblock.c files.Uwe Hermann
All southbridges using TINY_BOOTBLOCK have a bootblock.c files which simply includes an enable_rom.c files. As discussed on the mailing list, drop the enable_rom.c file by merging it into bootblock.c. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6158 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-09Add missing instruction break.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6155 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08first round name simplification. drop the <component>_ prefix.stepan
the prefix was introduced in the early v2 tree many years ago because our old build system "newconfig" could not handle two files with the same name in different paths like /path/to/usb.c and /another/path/to/usb.c correctly. Only one of the files would end up being compiled into the final image. Since Kconfig (actually since shortly before we switched to Kconfig) we don't suffer from that problem anymore. So we could drop the sb700_ prefix from all those filenames (or, the <componentname>_ prefix in general) - makes it easier to fork off a new chipset - makes it easier to diff against other chipsets - storing redundant information in filenames seems wrong Signed-off-by: <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6149 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-06Before lane reversal,Zheng Bao
De-asserts STRAP_BIF_all_valid for PCIE-GFX core. After lane reversal, Asserts STRAP_BIF_all_valid for PCIE-GFX core. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: QingPei Wang <wangqingpei@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6142 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-30Trivial. Reindent and dos2unix.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6133 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-26AMD SB600: Add TINY_BOOTBLOCK support.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6125 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-26AMD-8111: Add TINY_BOOTBLOCK support.Uwe Hermann
Also, add missing license header to amd8111_enable_rom.c, add some more code comments and use PCI IDs from pci_ids.h instead of hardcoding. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6124 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-24This patch solves crashes and BSODs that occur when booting Win7 withScott Duplichan
AMD RS780 uma graphics. Tested with frame buffer sizes 64m through 1GB by running dxdiag and Windows media player at 1600x1200 true color. Additional changes needed to boot Win7 on Mahogany_fam10 will follow. -- Enable and program the debug bar as required by the ATI graphics driver. First, make the debug bar writable and allow resource allocation code to program it. Once programmed, enable its operation. -- Disable the family 10h processor mmconf while the RS780 mmconf is in use. -- Make strap programming more closely follow the reference BIOS. -- Disable PCIe bar 3 after using it. -- UMA size is no longer hardcoded. -- Disable write combining for all steppings to eliminate stability problem. -- Correct task file data. -- Improve the accuracy of the Atom table that passes information to the driver. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Rudolf Marek <r.marek@assembler.cz> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6120 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Unify DIMM SPD addressing. For Geode, change thePatrick Georgi
addressing scheme to match the rest of the tree (0x50 instead of 0xa0). abuild tested. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-20Revert sblk/sblink change, use sblk like the rest of the codebase does.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5978 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-18This patch enables SB700 option PrefetchEnSPIFromHost in early setup.Scott Duplichan
It affects only systems booting from SPI flash, not those booting from LPC flash. By default, the SB700 reads dwords from the SPI flash chip. Setting PrefetchEnSPIFromHost causes the SB700 to read entire cache lines from the flash chip. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5965 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-17In the RS780/RS690 ProgK8TempMmioBase() function, the dst-link field is setLiu Tao
to zero, so for boards with RS780 not on CPU's HT chain 0, the function will mis-configure the MMIO dst-link routing, and the following enable_pcie_bar3() function will hang when it visits the MMIO. The following patch fixes the problem, and is tested on a K8 board with RS780 on HT chain 1. Signed-off-by: Liu Tao <liutao1980@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5959 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-17We currently read the CPU HT speed from HT chain 0's register.Liu Tao
Fix that to read the register from the chain where the SB chip is on. Signed-off-by: Liu Tao <liutao1980@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5958 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-17Add more missing GPL-headers, fix inconsistencies in others.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5957 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-13Enable or disable the power button in KconfigPeter Stuge
Some mainboards need to disable the power button to avoid turning off right after being turned on, while other boards ship with a jumper over the power button and should allow the user to configure the behavior. This adds infrastructure in the form of four mutually exclusive options which can be selected in a mainboard Kconfig (power button forced on/off, and user-controllable with default on/off) and one result bool which source code can test. (Enable the button or not.) The options have been implemented in CS5536 code and for all mainboards which select SOUTHBRIDGE_AMD_CS5536, but should be used also by other chipsets where applicable. Note that if chipset code uses the result bool ENABLE_POWER_BUTTON, then every board using that chipset must select one out of the four control options in order to build. All touched boards should have unchanged behavior, except pcengines/alix1c, traverse/geos and lippert/hurricane-lx where the power button can now be configured by the user. Build tested for alix1c, alix2d, hurricane-lx and wyse-s50. Confirmed to work as advertised on alix1c both with button enabled and disabled. Includes additional traverse/geos changes from Nathan and lippert/hurricane-lx changes from Jens to correctly use the new feature on those boards. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Aurelien Guillaume <aurelien@iwi.me> Acked-by: Nils Jacobs <njacobs8@hetnet.nl> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5948 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-13Fix a stupid bug in rs780 and rs690 code.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Scott Duplichan <scott@notabs.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5947 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-12We define IO_APIC_ADDR in <arch/ioapic.h>, let's use it.Uwe Hermann
As both ioapic.h and acpi.h define a macro named "NMI", rename one of them (NMI -> NMIType in acpi.h). Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5943 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-10Same applies for SB600.Rudolf Marek
Following patch enables UDMA on ALL IDE devices. The current code enables it only for primary master, which causes my DVD drive to fail under windows install and even after hard reset in linux (DMA seems lockup). The fix should not have any influence for Linux because the IDE driver will correctly reprogram this bit. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5933 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-13 14:52:39 +0000