summaryrefslogtreecommitdiff
path: root/src/southbridge/via
AgeCommit message (Collapse)Author
2008-09-19Attached patch fixes at least one issue ;) During the PCI BAR sizing must ↵Rudolf Marek
be the D1F0 bridge without activated I/O and MEM resources, otherwise it will hang whole PCI bus. U-boot is also disabling the IO/MEM decode when sizing the BARs, dont know why does we not. Second small change just changes a bit which controls the PSTATECTL logic. Third change deals with the integrated VGA, which needs to be enabled early, so the VGA_EN is set along the bridges, and PCI K8 resource maps are set correctly. Finally the CPU accessible framebuffer is now disabled as it is not needed. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3587 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-05This patch adds support for the VIA VT8237S south bridge. The VT8237R ↵Rudolf Marek
programming remains unchanged (tested on mine desktop) except of reverting the small change introduced by Bari (gpio/inta setup reg 0x5b). This should go for some board specific file. The change would broke at least mine board. But seems to be needed for jakllsch. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Bari Ari <bari@onelabs.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3567 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-01This patch gets the Epia-CN working without ACPI or APIC.Bari Ari
All devices work, no irq storms. Enjoy. Signed-off-by: Bari Ari <bari@onelabs.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3556 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-06-20Extend the VIA vt8237r southbridge decode range for the ROM to 1MB.Bari Ari
Signed-off-by: Bari Ari <bari@onelabs.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3369 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-20Following patch adds K8M890 support. It initializes the AGP and graphics UMA.Rudolf Marek
The V-link setup and HT bridge is redone, because VT8237A has it in another device. So far following combination of chipsets should now work: K8T890CE + VT8237R K8M890(CE) + VT8237R VIA PC1 brige moved to NB code (vt8237r_bridge.c -> k8t890_bridge.c) and notes about K8M890 support were added. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3183 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-19Following patch will setup KT890 HT automatically. It will find theRudolf Marek
max width of the link and also it will take the frequency of K8 HT already done coreboot (and checks if t can run on it). Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3169 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-15Following patch extends the ROM decoding to last 1MB, allowing to use largerRudolf Marek
flashes such as SST49LF080A: 1024K x8 (8 Mbit) Tested on my system, the flash is found and if I use coreboot in second half it works too. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3148 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-15Following patch fixes the retrain/reset sequence which caused problem with someRudolf Marek
nVidia cards. The enable link should be enough, retrain is done there. Tested on my system. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3147 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-18Please bear with me - another rename checkin. This qualifies as trivial, noStefan Reinauer
code is changed. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3052 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-15Various cosmetic fixes and improvements (trivial).Uwe Hermann
- Use 'static' where appropriate. - Use 'const' where appropriate. - Indentation fixes. - Add comment wrt init code which is only valid for VT8237R. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2974 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-13Add support for FID/VID changes messages.Rudolf Marek
Upon incoming SMAF message from CPU (C3 or FID/VID change), the SB will assert SLP# which is connected to LDTSTOP_L on K8 CPUs. Question is for how long. Imho for 100us. Which is more than plenty (2us required) I will try to justify this once I know what bios to set in SB. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2965 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-13Fine-tune the V-link bus between K8T890 and VT8237R and setRudolf Marek
it to 8X transfer rate (up to 1066 MB/s) similar code placed here would be needed for VT8237A/S etc. Using VIA recommended values despite they are for K8T890CF, this is K8T890CE (still dont know what is exactly different). This patch enables the parity error reporting on V-Link, so it enables NMI generation for the SERR# errors. The NMI may not be generated, maybe port 61h needs some tuning too. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2958 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-07This patch masks the function prototypes in stdlib.h from ROMCC, so thatCorey Osgood
ARRAY_SIZE() can be used on ROMCC-dependent systems. Also adds stdlib.h to vt8237r_early_smbus.c, so it'll build on those systems. Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2949 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-04Various cosmetics, coding style fixes, constifications (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2939 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-03This patch is some small changes to the vt8237r to prepare it forCorey Osgood
the Jetway J7F2 patch that should be coming soon, and also moves most defines into vt8237r.h. I've changed some of the values from u32 to u8, because that's all they should ever need to be. Also includes doxygenized comments! Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2937 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-30Add support for the VIA VT8237R southbridge.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: <corey.osgood@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2907 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-24Ever wondered where those "setting incorrect section attributes forStefan Reinauer
rodata.pci_driver" warnings are coming from? We were packing those structures into a read-only segment, but forgot to mark them const. Despite its size, this is a fairly trivial patch created by a simple search/replace Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2891 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-22This patch adds support for K8T890CE northbridge.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2883 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-04patch to fix the IDE configuration on EPIA boards. At some point thisBen Hewson
broke and stopped FILO from being able to boot. The fix is a simple one line change plus a comment to src/mainboard/via/epia/auto.c to write to the IDE configuration register 0x42 . This has always been done here, however at some point something broke it. The same register was also being set correctly in ide_init(), however for some reason this does not work. Possibly the register needs to be set before the IDE peripheral is enabled or maybe it is a timing issue. The section of code in ide_init() ( src/southbridge/via/vt8231/vt8231_ide.c ) that does write to register 0x42 has been commented out as it is superfluous and I have added a comment to indicate the reason, should someone at a future date wonder why. I have also changed the default COM speed from 19200 to 115200 in src/mainboard/via/epia/Options.lb There has been mention before about the EPIA board not being able to use 115200 but I have seen no such problems with my board. Signed-off-by: Ben Hewson <ben@hewson-venieri.com> This patch worked for me and allowed me to boot Debian kernel 2.5.16-4-486 on an epia 800 mhz system. It is able to consistently get through the initialization and start init now. However, after that it crashes at various points in the boot process. Acked-by: Alex Mauer <hawke@hawkesnest.net> Note from comitter: I am commiting this, although: 1. it's not the exact right way to fix it up, the chip.h for the sb should change 2. Alex reports problems, which are almost certainly memory issues. But it is as close as we've gotten. I can't test it. Ron Minnich git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2633 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-03-17Add initial pre-RAM serial output support for the VIA VT82C686(A/B)Corey Osgood
southbridge (with integrated Super-I/O). Signed-off-by: Corey Osgood <corey_osgood@verizon.net> Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Corey Osgood <corey_osgood@verizon.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2571 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-11-05Use the canonical name of the vendors/devices and theUwe Hermann
same format for all CHIP_NAME() entries in LinuxBIOS (Closes #20). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@linuxbios.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2490 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-09-13fix cardbus interrups (signed off by Nick Barker)Stefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2408 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-01-18fix stupid bug with unitialized conf variableRonald G. Minnich
disable agp slot in config.lb fix error in setting up com1 == should be TTYS0_BAUD note that the uart8250 struct is a bad design, but so is the uart8250 code. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2161 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-12-03smaller fixups here and there, allowing some motherboards to compile orStefan Reinauer
to fail later than before. dos2unix'ed the xe7501devkit files, that might have caused some problems before. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2127 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-11-22fixed fsf addressRonald G. Minnich
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2091 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-11-22EPIA-M fixupRonald G. Minnich
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2090 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-10-05Updating FSF address in the code.Stefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2051 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-09-14Clean up vt8235_early_smbus a bit.Jonathan McDowell
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2038 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-08-08Tidy + compile fixup VT8235 southbridge support.Jonathan McDowell
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2000 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-07-06Revision: linuxbios@linuxbios.org--devel/freebios--devel--2.0--patch-60arch import user (historical)
Creator: Li-Ta Lo <ollie@lanl.gov> More Via EPIA more via epia stuff, including the trival but fatal bug in auto.c git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1978 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-07-06Revision: linuxbios@linuxbios.org--devel/freebios--devel--2.0--patch-38arch import user (historical)
Creator: Li-Ta Lo <ollie@lanl.gov> emulator update x96emu update from Paulo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1954 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-07-06Revision: linuxbios@linuxbios.org--devel/freebios--devel--2.0--patch-37arch import user (historical)
Creator: Li-Ta Lo <ollie@lanl.gov> TLA is really diffcult to use. How am I going to roll back my last commit ? git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1953 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-07-06Revision: linuxbios@linuxbios.org--devel/freebios--devel--2.0--patch-36arch import user (historical)
Creator: Li-Ta Lo <ollie@lanl.gov> emulator update Correction to the reduce emulator from Paulo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1952 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-12-01Updated version of vt8231_early_smbus.cMark Wilkinson
smbus_read_byte routine updated as per suggestion by rgm addition reset & wait_until_ready to allow correct reading of first byte on epia systems. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1807 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-11-04- Update abuild.sh so it will rebuild successfull buildsEric Biederman
- Move pci_set_method out of hardwaremain.c - Re-add debugging name field but only include the CONFIG_CHIP_NAME is enabled. All instances are now wrapped in CHIP_NAME - Many minor cleanups so most ports build. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1737 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-10-29Changes to allow Via/Epia code to be compiled after recent code changes.Mark Wilkinson
New Files :- src/cpu/via/model_centaur/Config.lb src/cpu/via/model_centaur/model_centaur_init.c Updated Files :- src/arch/i386/include/arch/smp/mpspec.h - make write_smp_table a define for non smp systems src/cpu/x86/lapic/lapic_cpu_init.c - change possible typo src/mainboard/via/epia/Config.lb src/mainboard/via/epia/Options.lb src/mainboard/via/epia/auto.c src/mainboard/via/epia/chip.h src/mainboard/via/epia/failover.c - updated after recent code changes src/northbridge/via/vt8601/chip.h src/northbridge/via/vt8601/northbridge.c src/northbridge/via/vt8601/raminit.c - corrections after recent code changes to allow compiling src/southbridge/via/vt8231/chip.h src/southbridge/via/vt8231/vt8231.c - initial pass to allow compiling after recent code changes. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1726 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-10-21- Bump the LinuxBIOS major versionEric Biederman
- Rename chip_config chip_operations throughout the tree - Fix Config.lb on most of the Opteron Ports - Fix the amd 8000 chipset support for setting the subsystem vendor and device ids - Add detection of devices that are on the motherboard (i.e. In Config.lb) - Baby step in getting the resource limit handling correct, Ignore fixed resources - Only call enable_childrens_resources on devices we know will have children For some busses like i2c it is non-sense and we don't want it. - Set the resource limits for pnp devices resources. - Improve the resource size detection for pnp devices. - Added a configuration register to amd8111_ide.c so we can enable/disable individual ide channels - Added a header file to hold the prototype of isa_dma_init - Fixed most of the superio chips so the should work now, the via superio pci device is the exception. - The code compiles and runs so it is time for me to go to bed. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1698 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-10-16- First stab at running linuxbios without the old static device tree.Eric Biederman
Things are close but not quite there yet. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1681 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-10-06epia-m supportRonald G. Minnich
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1655 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-04-22start of epia-m portGreg Watson
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1524 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-04-17updatedGreg Watson
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1515 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-04-17get file names rightGreg Watson
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1514 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-04-17start of epia-m portGreg Watson
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1512 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-03-19simply change for keyboardRonald G. Minnich
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1451 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-10-23fixes from SONERonald G. Minnich
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1228 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-10-22fixes for EPIA.Ronald G. Minnich
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1227 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-10-21Fixes for SONERonald G. Minnich
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1224 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-10-11 - O2, enums, and switch statements work in romccEric Biederman
- Support for compiling romcc on non x86 platforms - new romc options -msse and -mmmx for specifying extra registers to use - Bug fixes to device the device disable/enable framework and an amd8111 implementation - Move the link specification to the chip specification instead of the path - Allow specifying devices with internal bridges. - Initial via epia support - Opteron errata fixes git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1200 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-10-02First SPD code in and working!Ronald G. Minnich
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1177 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-10-02success. It boots as a bproc slave now.Ronald G. Minnich
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1176 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 05:13:00 +0000