summaryrefslogtreecommitdiff
path: root/src/southbridge
AgeCommit message (Collapse)Author
2009-12-31romcc:Patrick Georgi
- Set __PRE_RAM__ define per default - Properly handle ignored (#ifdef'd out) #include lines amd/serengeti_cheetah_fam10: - write ACPI files to $(obj) instead of the top dir (alias $(CURDIR)) tinybootblock: - provide a way to define code that should be added to the bootblock, to map the entire ROM for use by CBFS amd/model_fxx, amd/model_10xxx: - add CONFIG_SSE walkcbfs.S: - eliminate the use of two registers, to make space for romcc to wiggle amd/serengeti_cheetah_fam10: - use the enable_rom framework. not entirely functional yet Boot-tested on emulation/qemu-x86 Build-tested on amd/serengeti_cheetah_fam10 amd/serengeti_cheetah_fam10 fails in amdht/ somewhere, but builds Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4994 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-11-27Eliminate special case id.inc/id.lds in favor of a configuration variable ↵Patrick Georgi
ID_SECTION_OFFSET which is normally set to 0x10 (the current default) and set to 0x80 (the current alternative) where necessary (if romstraps get in the way). For Kconfig, the special case is set per southbridge (as these define the necessity for this workaround), for newconfig it's added to each single board. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4962 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-11-06Remove drivers/pci/onboard. The only purpose was for option ROMs, which areMyles Watson
now handled more generically using CBFS. Simplify the option ROM code in device/pci_rom.c, since there are only two ways to get a ROM address now (CBFS and the device) and add an exception for qemu. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4925 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-11-06Drop all pre-CBFS rom_address entries in Config.lb/devicetree.cb.Uwe Hermann
Since we have CBFS setting rom_address in board files is no longer necessary. Also, drop vga_rom_address from RS690 completely, it was never used in the code. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4923 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-11-06Split the two usages of __ROMCC__:Myles Watson
__ROMCC__ now means "Don't use prototypes, since romcc doesn't support them." __PRE_RAM__ means "Use simpler versions of functions, and no device tree." There are probably some places where both are tested, but only one is needed. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4921 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-30Remove some warnings from the tyan s2895.Myles Watson
Declare superio functions to be static and remove duplicates. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4890 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-27Improve coreboot build output and eliminate some warnings:Uwe Hermann
- Add static and const where possible. - Turn some #warning entries into TODO comments. - Add missing prototypes. - Remove unused variables. - Fix printf arguments or cast them as needed. - Make sconfig output look better. Drop useless "PARSED THE TREE" output. - Print "(this may take a while)" while building romcc. Add missing "\n". Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watosn <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4874 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-27Add few missing prototypes, and remove few unused (thus lonelly) variables.Maciej Pijanka
TODO - x86emu need (imo) some common header with prototypes at least - clog2, ulzma, hardwaremain prototypes added by this patch probably should be moved to some header too. - in src/devices/device_util.c prototype is before function because seems, it is used only within same file, if not it should be moved to debug section of prototypes in include/device/device.h Signed-off-by: Maciej Pijanka <maciej.pijanka@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4871 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-26Kontron 986LCD-M updateStefan Reinauer
- run ACPI code through preprocessor so we get the same values as the C code - fix PCIe x16 slot - fix ICH7 Azalia/HDA driver - SMI/GNVS update security fix (only allow struct pointer update once) - ACPI updates - IDE driver fixes - add cmos options for disabling onboard ethernet and controlling system fan Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4861 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-24s/object-y/obj-y/ in two southbridges, since otherwise kbuild will not pick ↵Stefan Reinauer
up the files Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4834 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-23Remove left-overs from Winbond southbridge removal (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4831 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-23drop a lot of dead code, including an old winbond southbridge from our removedStefan Reinauer
ppc port, some ambiguous use of CONFIG_IDE and an unused ide driver (we dropped the filesystems already to be used with it) (somewhat trivial) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4828 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-22minimal whitespace fix (trivial)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4824 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-20Fix #if CONFIG_VGA==1 -> #if CONFIG_VGA.Myles Watson
(forgotten in last check in.) Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4817 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-19Clean up some #ifdef CONFIG_*Myles Watson
Change HAVE_FAN_CTL to be specific to the SuperIO that supports it. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4809 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-18Simplify Kconfig files by using "select" where possible (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4806 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16Add CONFIG_VGA_ROM_RUN to dbm690t and pistachio, otherwise theZheng Bao
VGA ROM can not run. After make, run > ./cbfs/cbfstool ./coreboot.rom add ../vga_bios.rom pci1002,791f.rom optionrom to make the final image with vga bios. The macro vga_rom_address is out-of-date when CBFS starts play its role. it also should be eliminated from rs690/chip.h as below. But it will cause building error on other board, which I cant make test on. ## Index: src/southbridge/amd/rs690/chip.h ## =================================================================== ## --- src/southbridge/amd/rs690/chip.h (revision 4782) ## +++ src/southbridge/amd/rs690/chip.h (working copy) ## @@ -23,7 +23,6 @@ ## /* Member variables are defined in Config.lb. */ ## struct southbridge_amd_rs690_config ## { ## - u32 vga_rom_address; /* The location that the VGA rom has been appened. */ ## u8 gpp_configuration; /* The configuration of General Purpose Port, A/B/C/D/E. */ ## u8 port_enable; /* Which port is enabled? GFX(2,3), GPP(4,5,6,7) */ ## u8 gfx_dev2_dev3; /* for GFX Core initialization REFCLK_SEL */ ## Don't apply above patch about rs690/chip.h before every board has been fixed. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4783 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-15Add CONFIG_GENERATE_* for tables so that the user can select which tables notMyles Watson
to build, but by default all the tables that are available are built. Make PIRQ table build for qemu. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-14delete white trailing spaces. It is done by the perl command.Zheng Bao
sh> perl -pi -e 's/[[:blank:]]+$//' $files Trivial. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4772 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-14Use CAR ck804 code with the s2892.Myles Watson
Reset the s2891 so the HT speed gets updated. Remove some PANTA comments. Add SATA init from non-CAR version. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4771 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-13White space change in preparation for a patch to unify handling of ck804.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4770 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-13This patch support for the Technexion Tim-5690 mainboard.Libra Li
It's an embedded AMD RS690/SB600 mainboard. http://www.technexion.com/index.php/tim-5690 Myles added Kconfig support. Signed-off-by: Libra Li <libra.li@technexion.com> Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4765 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-09This change allows us to see the spd on the s850, finally. Ronald G. Minnich
There is an i2c mux out there. We found it using a user level program that, as usual, began by inverting all gpios until we found out what we needed to know. In the end, we just set up the GPIOs as the factory bios does. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4755 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-09Remove default n statements to simplify .config and ldoptions files.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4753 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-09More kconfig cleanups:Uwe Hermann
- Use "default n" for all components that shall be "select"ed. - Use "0x0" instead of "0" for hex variables for clarity and to reduce the risk of people passing integer instead of hex values to such variables. - Add TODO comments for boards that have irq_tables.c but don' set CONFIG_HAVE_PIRQ_TABLE = 1. Someone with the hardware should test enabling. - ASUS M2V-MX SE doesn't have irq_tables.c so don't define IRQ_SLOT_COUNT in its Kconfig file. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4749 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-08Fix CS5535 build for kconfig, more kconfig boards (lippert, artec)Patrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4748 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-08Disable x86emu for via based boards which bringPatrick Georgi
their own vgabios.c Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4744 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-07Enable full ROM access on AMD CS5530(A) (needed for CBFS).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4731 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-04The new CBFS based build system requires the whole ROM to be accessibleUwe Hermann
in very early stages, otherwise the boot may hang like this because the CBFS headers cannot be found/accessed: Uncompressing coreboot to RAM. Jumping to image. Check CBFS header at fffedfe0 magic is ffffffff ERROR: No valid CBFS header found! CBFS: Could not find file fallback/coreboot_ram Jumping to image. This patch enables full ROM access on all 440BX boards right after the serial init (and before CBFS headers are parsed). Build-tested and runtime-tested on ASUS P2B-F. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4721 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-04This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE.Patrick Georgi
Both were only really used in pre-cbfs, as the payload's size isn't relevant for the build process anymore. Various calculations in {no,}failovercalculation.lb are adapted accordingly. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4720 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-04Add initial kconfig support for all AMD GX1 boards.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4719 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-29Remove some warnings.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4686 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-25some progress on kconfig:Patrick Georgi
- northbridges are done - southbridges are done - Intel CPUs are done, with a design that the board only has to specify the socket it has, and the CPUs are pulled in automatically. There is some more cleanup possible in that area, but I'll do that later - a couple more mainboards compile: - intel/eagleheights - intel/jarrell - intel/mtarvon - intel/truxton - intel/xe7501devkit - sunw/ultra40 - supermicro/h8dme - tyan/s2850 - tyan/s2875 - via/epia - via/epia-cn - via/epia-m - via/epia-m700 - via/epia-n - via/pc2500e (PPC not considered, probably overlooked something) All of them only _build_, but some options are probably completely wrong. To be fixed later Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4673 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-22src/Kconfig: Remove HT-specific options.Myles Watson
src/cpu/amd/socket_F/Kconfig: Remove second occurrence of CPU_SOCKET_TYPE. src/mainboard/amd/serengeti_cheetah/Kconfig: Add HT_CHAIN_UNITID_BASE here, since it is board specific. src/mainboard/tyan/s289X/Kconfig: Fix typo and change APIC_ID_OFFSET to match old config. src/devices/Kconfig: Change default value of *_PLUGIN_SUPPORT to match old config. src/southbridge/amd/amd8131/Makefile.inc: Remove check since it was a typo, and the correct variable is checked in the parent directory. src/Makefile:Use devicetree.cb instead of Config.lb to generate static.c. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4657 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-22failoverR.diff: Revert my failover change since Kconfig only supports fallback.Myles Watson
kconfig_s2892.dif: Add support for Tyan s2891, s2892, and s2895 to Kconfig. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4656 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-01As more users of Asus M2V-MX SE emerged. Here is long pending patch I wanted toRudolf Marek
write. It boots the SB/NB V-link performance to full duplex 533MB/s. (in fact x2 for FDX) The default was 266MB/s but half duplex only. If you encourage any stability issues we need to look into fine tuning the bus. The values are VIA recommended. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4625 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-29This is the final set of changes to allow rumba to build. Rumba is notRonald G. Minnich
tested. I also addressed questions raised by Uwe: TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 UDELAY_TSC Are now defined as booleans in src/cpu/x86/Kconfig and can be selected in the mainboard Kconfig. The remaining question of Uwe's is a deeper problem: --- We'll have to check if this works. From a quick glance the Rumba does not have the mmx related lines (which _are_ in Makefile.romccboard.inc, though): crt0-y += ../../../../src/cpu/x86/fpu/enable_fpu.inc crt0-y += ../../../../src/cpu/x86/mmx/enable_mmx.inc crt0-y += auto.inc crt0-y += ../../../../src/cpu/x86/mmx/disable_mmx.inc --- We're going to need a whole variant of this standard mainboard OR we're going to have to make (some) of the unconditional includes above conditional. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4618 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-28This patch adds VGA and PS/2 Keyboard/mouse support to the already existing ↵Arnaud Maye
intel truxton (ep80579) dev board. This patch tries to improve the pcie portA configuration. The Matrox G550e PCIe gfx card shipped along with the dev board is supported. Signed-off-by: Arnaud Maye <arnaud.maye@4dsp.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4615 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-28Add kconfig support for all Intel 82810 (i810) boards.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4613 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-28This is the beginning of support for Geode and Kconfig in v2. Ronald G. Minnich
It also brings in the vsm from v3, which was a much cleaner cut. Over time, I hope to bring all the code back from v3. I have some rumbas at home and want to use them. I have a patch which comes in next that makes the rumba build. Note that I am holding the src/*/amd/Kconfig patch until these get merged. These have no impact on the current system. Note that this is not complete but I want to fill in the blanks bit by bit. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4611 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-28Silence unneeded #warnings, change to code comments (trіvial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4607 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-27Added support for the AMD RS690 and SB600 southbridges in KconfigCristi Măgherușan
Signed-off-by: Cristi Măgherușan <cristi.magherusan@net.utcluj.ro> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4601 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-27The new resource allocator helped me find a bug in SB600 diagnostics.Carl-Daniel Hailfinger
The SB600 SATA code printed that two BARs had the same address because it didn't mask the correct number of bits in the BAR. Functionality was not affected, but the debug output was incorrect. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Zheng Bao <zheng.bao@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4591 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-26Remove a couple of CONFIG_ prefixes that shouldn't have happened.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4588 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-26Enable Direct TMDS for the RS690, which allows to display on HDMI and DVILibra Li
monitors. Signed-off-by: Libra Li <libra.li@technexion.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4585 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-25Various Kconfig and Makefile.inc fixes and cosmetics.Uwe Hermann
- Whitespace fixes, remove trailing whitespace, use TABs for identation (except in Kconfig "help" lines, which start with one TAB and two spaces as per Linux kernel style) - Kconfig: Standardize on 'bool' (not 'boolean'). - s/lar/cbfs/ in one Kconfig help string. - Reword various Kconfig menu entries for a more usable and consistent menu. - Fix incorrect comment of NO_RUN in devices/Kconfig. - superio/serverengines/Kconfig: Incorrect config name. - superio/Makefile.inc: s/serverengine/serverengines/. - superio/intel/Kconfig: s/SUPERIO_FINTEK_I3100/SUPERIO_INTEL_I3100/. - mainboard/via/vt8454c/Kconfig: Fix copy-paste error in help string. - mainboard/via/epia-n/Kconfig: Fix "bool" menu text. - console/Kconfig: Don't mention defaults in the menu string, kconfig already displays them anyway. - Kill "Drivers" menu for now, it only confuses users as long as it's emtpy. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4567 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-24Add support for Nvidia Southbridges to Kconfig.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Harald Gutmann <harald.gutmann@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4566 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-18Add via south support. Correct usage of conditional variables. Ronald G. Minnich
Note the makefile.inc may be out of date given the new commits of code today, but this is what was signed off ... Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4551 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-18Add the rest of the files.Jon Harrison
Thanks Jon. Signed-off-by: Jon Harrison <bothlyn@blueyonder.co.uk> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4550 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-17Get the Via EPIA-N(L)/CN400 to a reasonable level of maturity::Jon Harrison
Tested on Via EPIA-NL8000EG with FILO payload booting FC9 (2.6.25 kernel) from SATA HDD. ACPI is working for PCI interrupt routing, some memory stuff and Soft-Off. USB/SATA Working VGA Console Working X Working via Onboard AGP Removed dsdt.c, fixed some whitespace. Signed-off-by: Jon Harrison <bothlyn@blueyonder.co.uk> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4549 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 20:47:14 +0000