summaryrefslogtreecommitdiff
path: root/src/southbridge
AgeCommit message (Collapse)Author
2014-04-18southbridge/sb800: Strip obsolete commentaryEdward O'Callaghan
Change-Id: I5cd9e1fcf197eae966be710b2ab24f49c6885eb0 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5529 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-17southbridge/hudson: Remove unused function set_sm_enable_bits()Alexandru Gagniuc
This function isn't used on hudson, and seems to be copy-paste from older southbridges. It is used in sb700 to enable or disable certain PCI devices. On hudson, these configuration bits are moved to the PM space. Change-Id: I9b967a2d0a5dddc8341204dadeed90460251915c Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5513 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-17southbridge/hudson: Add support for ACPI enable/disable via SMIAlexandru Gagniuc
This enables the ACPI SMI command port in the FADT table, and sets up the hardware accordingly. If we have SMI enabled, then we don't set the SCI_EN bit at boot, causing the OS to send the ACPI_ENABLE command, as required by the ACPI spec. This gives us a chance to hook into the mainboard_smi_apmc() handler. Change-Id: Ib4c63d55b3132578dcae48bfe2092d4ea35821dd Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5511 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-17southbridge/hudson: Pass GEVENT SMIs to mainboard_smi_gpi()Alexandru Gagniuc
Change-Id: Ifc368974a7a0dc0756431654fb89668e3846801a Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5502 Reviewed-by: Aaron Durbin <adurbin@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-17southbridge/amd/agesa/hudson: Add initial support for SMMAlexandru Gagniuc
This sets up the infrastructure to handle SMIs generated by the Hudson southbridge. An API for interfacing to mainboard handlers is not defined at this point. A few functions are defined to allow mainboard code to enable SMIs from GEVENT pins. These are the only functions which I expect to be needed anytime in the foreseeable future. SMIs are always acknowledged and cleared, as not clearing an SMI will cause us to re-enter the SMI, effectively bricking the machine if a southbridge-generated SMI without a handler occurs. Change-Id: Ibceb21ac5423eb134d3eb7d24800280b183f7619 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5494 Reviewed-by: Aaron Durbin <adurbin@gmail.com> Tested-by: build bot (Jenkins)
2014-04-16southbridge/hudson: Use MMIO instead of PIO to access PM spaceAlexandru Gagniuc
The MMIO region is set up by AGESA very early on, so we can use it to access the PM register space in ramstage. 16-bit accessors are also provided to simplify some setup tasks. 16-bit accesses are not possible via PIO. The pm2_iowrite/read accessors are removed, as they are not used. Change-Id: Ie7967b5086eb004525c39721338c6495aedc8165 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5503 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-15southbridge/amd/agesa/hudson: Clean up AGESA #includesAlexandru Gagniuc
Just like in commit * 1d87dac hp/pavilion_m6_1035dx: Sanitize #includes Include AGESA headers specifying the path relative to AGESA_ROOT. The path is specified relative to AGESA_ROOT as opposed to src/ since this code may include headers from different AGESA families, depending on the board. Change-Id: Ide38cc34e207a8b617d1d319fd9c17a785f55833 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5423 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-04-13hudson boards: Don't require ide.asl file on boards without IDEAlexandru Gagniuc
Not all boards which use the AMD Hudson southbridge have IDE. However, the southbridge's asl included an 'ide.asl' file which had to be present in $(mainboard_dir)/acpi. Address this issue by removing the inclusion of 'ide.asl' from the southbridge 'fch.asl' and remove 'ide.asl' from Hudson boards, none of which have IDE. If future hudosn board will come with IDE, the device can be declared in the PCIO scope of dsdt.asl, right below the inclusion of 'fch.asl'. Change-Id: Ie2efb7ebf8f5b527e26d7aaaeafbd3053a9a6b28 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5459 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-13cimx/sb800/cfg.c: Cut out purposeless ROM reading noise.Edward O'Callaghan
Follow along hudson, cut out "SLP_TYP type was 0" excessively filling the buffer. We could make this conditional on non-zero? Change-Id: Iffd4c146b2ac4f57dbc3a011a683c92b6e132e39 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5495 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-13cimx/sb800 boards: Don't require ide.asl on boards without IDEEdward O'Callaghan
Not all boards which use the AMD cimx/sb800 southbridge have IDE. However, the southbridge's asl included an 'ide.asl' file which had to be present in $(mainboard_dir)/acpi. Address this issue by including ide.asl only in boards which have IDE, and remove it from all other cimx/sb800 boards. Change-Id: I57fcb4db9f85234b05ae1705ef81a576c478cee6 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5460 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-11intel/*bd82x6x/acpi/pch.asl: Correct name of field unit to GP03Paul Menzel
GP0e does not fit into the naming scheme of the field units surrounding this field unit definition. Also the keys for e and 3 are close to each other supporting the theory that this is indeed a typo. Change-Id: I43cf288fe1e0240b33971073c1aa8a1db5762e31 Reported-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5483 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-09lynxpoint: Fix SerialIO ACPI compile issue with recent IASLDuncan Laurie
The SerialIO DwordIo() definition is fixed up before returning it in the serialio device _CRS method, so the values that are set in the raw ASL are not actually used. However modern versions of IASL do not like that the RangeLength is set to zero and will fail to compile. Set this value to 1 to make IASL stop complaining, but the real value is still fixed up in _CRS so this has no real effect on the end result. Change-Id: Iceb888e54dd4d627c12d078915108a11f45b1a2d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5182 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-09sb/amd/amd8111/acpi.c: Remove set but unused variable `dword`Paul Menzel
Removing `-Wno-unused-but-set-variable` from `CFLAGS` results in the error below, when building for example the HP DL145 GL1. CC southbridge/amd/amd8111/acpi.ramstage.o src/southbridge/amd/amd8111/acpi.c: In function 'acpi_init': src/southbridge/amd/amd8111/acpi.c:100:11: error: variable 'dword' set but not used [-Werror=unused-but-set-variable] Removing the variable `dword` fixes this error. The read is left in the code, as I do not know if it has an effect or not. Change-Id: I9957cef3a996c5974c275423c9de63ccf230974e Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5315 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-06amd/agesa/hudson: Implement PNP resource setup in LPC bridgeRudolf Marek
The previous SBxxx generations were setting up LPC bridge based on the PNP resources. Implement it also for AGESA Hudson. The AGESA itself opens one big region DFLT_SIO_PME_BASE_ADDRESS (512 bytes). Make the code smart enough to detect already used region and if any resource fits into AGESA defined region, do nothing. Change-Id: I718d034bc4c778697a7bd0506d4550c8f5a43159 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/4497 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-03-04bd82x6x, ibexpeak, lynxpoint: Unify SPI.Vladimir Serbinenko
SPI registers didnt change since ICH8. No need to have separate files for them. Unify. Change-Id: I4e2ac3221b419c007e135c9ee615fc3b84424cbc Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5254 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-04ibexpeak/ehci: Set .enable_resources properly.Vladimir Serbinenko
Without this memory decoding isn't activated which, in turn, makes SeaBIOS crash. Change-Id: I3dcc721b500ab7468e1082157eeeed38044462d0 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5326 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-25lynxpoint: Kill alternative cbfs_load_payload.Vladimir Serbinenko
With generic load using 32-bit accesses this is no longer has a huge impact it previously did. It's also unnecessarily component-speficific. Change-Id: I7e8a74ea1ceaa225e1024f9eb43e7280773e2b5a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5131 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-20ibexpeak/thermal: set temperature target in early init.Vladimir Serbinenko
Properly determine temperature target and set it in early init rather than hardcoding it in late init. Change-Id: Ie763f205890674a9dd1d9c5974caaccdd67cea14 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5264 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-19ibexpeak/lpc: Fix PCIIDs.Vladimir Serbinenko
Add PCIID from Easynote LM85. Remove unrelated IDs inherited from BD82x6x. Change-Id: I03b6e0b2e08a4a6014aa1ef1f8d9a3a567f03ad9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5263 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-02-18lynxpoint: Finalize chipset before playload if not CONFIG_CHROMEOSDuncan Laurie
The Chrome OS environment sends an SMI to finalize the chipset/board at the end of the "depthcharge" payload, but there is no facility to send this command if not using the full ChromeOS firmware stack. This commit adds a callback before booting the payload that will issue this SMI which will lock down the chipset and route USB devices to the XHCI controller. Change-Id: I2db9c44d61ebf8fa28a8a2b260a63d4aa4d75842 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5181 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-17vortex86ex: Drop baudrate programming for 10 UARTsKyösti Mälkki
This is responsibility of end-user application. When coreboot does it, it is only for the purpose of debug console. Change-Id: Idbbf9528c60b9b819b7bea9dfe84078a3f055bc9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5251 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrew Wu <arw@dmp.com.tw>
2014-02-17ibexpeak/azalia: Remove C4-register extended init.Vladimir Serbinenko
This sequence was derived from BD82X6X and on ibexpeak it inadvertently disables interrupts. In older kernels it wasn't a problem but in new kernel it makes codec probe fail. Change-Id: I40184ae8c4cfe758869af1a1565b88f0a238150e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5074 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-17ibexpeak/sata: Add PCI ID from Easynote LM.Vladimir Serbinenko
Change-Id: I979a40ad3692cd474920f3ee5c6b10c41f75bfdb Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5256 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-16usbdebug: Remove EHCI_DEBUG_OFFSETKyösti Mälkki
Read this variable from PCI configuration capabilities list instead. Change-Id: I0cfe981833873397c32cd3aa2af307f35f01784b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5176 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-12lynxpoint: Do not put SerialIO devices into D3Hot in ACPI modeDuncan Laurie
Remove the bit of code that was putting the SerialIO devices into D3Hot state when they are switched from PCI to ACPI mode. Instead, add the appropriate ACPI Methods to allow the kernel to control the power state of the device. The problem seems to be that if the device is put in D3Hot state before it is switched from PCI to ACPI mode then it does not properly export its PCI configuration space and cannot be woken back up. Adding the ACPI Methods for _PS0/_PS3 allows the kernel to transition the device into D0 state only when it is necessary to communicate with the device, then put it back into D3Hot state. Change-Id: I2384ba10bf47750d1c1a35216169ddeee26881df Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5193 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-11amd/cimx: fix sb(8|9)00 NULL type redefineAaron Durbin
It is inappropriate for chipset code to be redefining types -- especially NULL to a non-pointer type. There's only one non-straight forward change. A condition being checked was '!ptr_type == NULL' (0 as int). That check is actually 'ptr_type != NULL'. Change-Id: Iab5733e5a573baba6fec94e0c955ba4fad72c836 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5088 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-10usbdebug: Remove duplicate port claimKyösti Mälkki
This claim is useless when done before EHCI controller reset. Code in usbdebug_init_() already sets this properly after reset, see use of DBGP_OWNER. Change-Id: Ic17493fe4edbbbed6ebcbef35a264fbf188f1fba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4709 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-06uart8250: Drop includes in superioKyösti Mälkki
Change-Id: If723896cc31da75dbb3a63d5dc959764e96fded1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5139 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-06uart8250: Drop unused declarationsKyösti Mälkki
Change-Id: Ie915ef9dbc45604bd5ca1b610acb12af634fdebe Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5138 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-06usbdebug: Move under drivers/usbKyösti Mälkki
Also relocate and split header files, there is some interest for EHCI debug support without PCI. Change-Id: Ibe91730eb72dfe0634fb38bdd184043495e2fb08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5129 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-06usbdebug: Drop obsolete codeKyösti Mälkki
Change-Id: I918ca1d0d0d7bcb7e16d41a12830a0357f15b8ed Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5130 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-02-04AMD cimx/sb800: Set SPI frequency and prefetchKyösti Mälkki
Broken with/since commit d1cb0eec. Original intention was to set the frequency for 'Fast Read' command in bits 15..14, and enable 'Fast Read' command. Modified register contains SPI frequency for 'Normal Read' command in bits 13..12. Default for this is 11b for 16.5 MHz. Existing code unintentionally clears these bits, increasing SPI frequency to 66MHz for 'Normal Read' command. This is above specifications for many common SPI flash components and also makes flashrom older than 0.9.7-r1750 to operate unreliably on read/write/erase for these platforms. Change-Id: I30109e2a0410c0bb0bdc968ea71787396b32e761 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5089 Tested-by: build bot (Jenkins) Reviewed-by: Kevin O'Connor <kevin@koconnor.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-02-01AMD hudson and yangtze: add IMC fan control supportWANG Siyuan
imc_reg_init: init fan control related registers. enable_imc_thermal_zone: AGESA does not enable thermal zone. We enable it here. Change-Id: I93c729982d78b6d2c7c20bcb1a3e27a7dd0eba91 Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/4300 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-02-01ibexpeak: add smbus_write_byteVladimir Serbinenko
Change-Id: I045f1cff794d3c965c502fff98dd2442af2143bd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4839 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-02-01bd82x6x: Add smbus_write_byteVladimir Serbinenko
Change-Id: Iaab076cc014a1ee463866c243636f4f71798ddc4 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4838 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-01-23sandy/ivy SPI: Support hardware sequencing and use with multiple chipsVladimir Serbinenko
When 2 chips are present to get to the second one you have to use hardware sequencing. Also use it as the fallback if chip is unknown. Based on code in flashrom by Stefan Tauner and Carl-Daniel Hailfinger distributed under compatible license. Tested on Lenovo X230 which has EN25QH64 (8M) + N25Q032..3E (4M) Change-Id: I56f3cf0406b5f09fa327ed052c8e8b1df1d8a11f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4613 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-23dmp/vortex86ex: Initialize I2C controller base address/IRQAndrew Wu
Change-Id: Iefd6852f2300f703ebed8b52aee627107a024f85 Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/4570 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-23X201: Enable expresscard hotplug.Vladimir Serbinenko
Change-Id: Ieefc2ad775c16de9aa974b2602d55ee047c9f568 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4643 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-23nehalem: Fix SMRAM register addressVladimir Serbinenko
Change-Id: If6646853039d15d6ba0fcf2b9b9b0658004be6e6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4787 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-23Ibexpeak: add missing thermal init.Vladimir Serbinenko
Without it ME doesn't always start correctly and no temperature is reported, no fan management and so on. Change-Id: Iff71f3afbc35a1453a20d182890ae2d196c556bd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4636 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-22Lenovo X230: new portVladimir Serbinenko
probably a problem in MRC: - EHCI output failure after sysagent - no S3 - no MRC cache - MRC needs watchdog - less MTRR could be used by some memory map optimisations Not tested: - dock (probably doesn't work) - msata (probably works) - wwan (probably works) - mini displayport (probably works) Blobs: MRC VGA Oprom Change-Id: I5bdb9372971f48e048848d57b6c924b79782dbde Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4679 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-01-15AMD Hudson: show POST codes on a PCI deviceIdwer Vollering
Show POST codes on a PCI device: implement hudson_pci_port80(). Remove the comments that use pci_locate_device(): using the code found in the comment seems to break booting. This shares much code with sb600/sb700/sb800, however the deduplication work needs to be discusses somewhere else than in this review board. Tested on an Asus F2A85-M. The contribution is (C) by Rudolf Marek. Change-Id: I54fb1dcb0614452c775ed70d867ab44ff263a61a Author: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/4559 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-01-12ibexpeak / bd82x6x: Make SATA mode user-visible option.Vladimir Serbinenko
Ability to choose compatibility mode is interesting for testing payloads and OS for compatibility with older systems. As per comments "ide_legacy_combined # TODO: Does nothing since generations, remove from sb code?" The "combined" mode was removed. It wasn't used by any mobo and the code for it is almost identical to IDE one other than few bits relating to interrupt handling and ISA mode. Change-Id: I407a8fac753b513812a86bef5abcf39c6d81472e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4658 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-12ibexpeak: Fix timings for IDE mode.Vladimir Serbinenko
Change-Id: I3c89bb633c32a2c2db349cb4fcbe1ed1c8deb5af Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4657 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-01-12CBFS: use cbfs_get_file_content whenever possible rather than cbfs_get_fileVladimir Serbinenko
Number one reason to use cbfs_get_file was to get file length. With previous patch no more need for this. Change-Id: I330dda914d800c991757c5967b11963276ba9e00 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4674 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-01-10Replace all occurences of sprintf with snprintfVladimir Serbinenko
THis reduces risks of bufer overflows. Change-Id: I77f80e76efec16ac0a0af83d76430a8126a7602d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4279 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-01-09bd82x6x/ibexpeak: Make DRAM reset gate GPIO configurableVladimir Serbinenko
DRAM reset gate GPIO is different on different mobos move it to hidden config with 60 (current value) as default. Set it to 10 for Lenovo X201. Change-Id: I4f3b6876d7c33d4966315091b63a76a9a0064c16 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4622 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-01-06usbdebug: Fix hidden menuconfig optionsKyösti Mälkki
Options for selecting the USB port and controller for usbdebug were unintentionally hidden with commit 8232bc2c on AGESA platforms using cimx/sb700 or cimx/sb800. Change-Id: Ibacc81a580519fe7fa86f08374046625327340b4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4607 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-01-06nehalem: Simplify smi.c by using __SIMPLE_DEVICE__Vladimir Serbinenko
Change-Id: Ib5bac45ee7aa5492c10fa97cd75b828b6192250d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4604 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2013-12-29AMD fam10: Drop RAMINIT_SYSINFOKyösti Mälkki
AMD fam10 raminit cannot be built without RAMINIT_SYSINFO, this is not a true option but copy-paste remainder from AMD K8. Change-Id: Id8edc112f3bacebd1732304ac9ee6e77cc6263b7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4581 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 03:20:30 +0000