summaryrefslogtreecommitdiff
path: root/src/superio
AgeCommit message (Collapse)Author
2018-08-21superio/ite/it8721f: Add SuperIO ACPI declarationsArthur Heymans
Change-Id: I074d57fa5b140b6946ae81beb210fefac48a66eb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28226 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-21superio/ite/it8721f: Add resourcesArthur Heymans
There is no public datasheet available for this SuperIO so the resources are guessed by looking at other ITE SuperIO's and the register dumps while running vendor firmware. The only board with this SuperIO in the tree is the asus m5a88-v. Most of the devicetree entries would have been invalid here so one should not worry too much about regressions. Tested with Foxconn d41s. Change-Id: I6715c68b3aa9aebf6e292975cbf64ce905b30e8b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-17superio/ite/it8720f: fix power control initFelix Held
The existing code for modifying the power state after power loss of the system only implemented the transitions from power off to either power on or power keep properly. Since I don't have a board with this chip, I couldn't test the patch on real hardware. The two cases described above were tested before the original patch was merged, so I'd expect this to work. Change-Id: I3c26a2837e451dbfd3cee82e9beedc0f4a90af03 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-13superio/winbond/w83627hf: Remove unused valueElyes HAOUAS
Change-Id: I90d1997254f6766f4c61ff55449109adbdd783e3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-09src/superio: Fix typo and remove unneeded whitespaceElyes HAOUAS
Change-Id: Iadc28d1632aa9b7d0b028c229049a348d5c07882 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09superio: fix and extend pnp_info of wpcd376iStefan Tauner
The implementation of wpcd376i in coreboot is based on the superiotool output which apparently was incorrect. This patch refines the implementation to match the datasheet. Change-Id: I0108e912dc4f603276074f0999c6d3146c3b13f9 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/27857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-03superio/nuvoton/nct6776/acpi: Add PS/2 mouse supportTristan Corrick
By defining SUPERIO_KBC_PS2M, ACPI code is added to show the PS/2 mouse. This has been tested on an ASUS P8H61-M LX with Linux 4.9.110 and 4.17.8. In each case, the PS/2 mouse works automatically, whereas it was not detected before. Change-Id: I7983f85b3fd23547950f1f75a81bbca63c63d52b Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03superio/acpi: Make _CRS methods Serialized, eliminating IASL remarksTristan Corrick
When compiling for the ASUS P8H61-M LX, IASL 20180531 emits the following remark: "Control Method should be made Serialized (due to creation of named objects within)". Making the appropriate methods Serialized eliminates these remarks. Change-Id: I8e95d9a00a629a2f904c79b78fac20810327ed37 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27796 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-03superio/nuvoton/nct6776/acpi: Add parallel port supportTristan Corrick
Exposing the parallel port via ACPI causes Linux to automatically detect the parallel port and load the appropriate modules. Tested on an ASUS P8H61-M LX with Linux 4.9.110 and 4.17.8. However, no parallel port device has been tested. Change-Id: I2529a074e24433d093ad0650a45c7b29238620f3 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03superio/nuvoton/nct6776/acpi: Fix typo in commentsTristan Corrick
The constant used in the ACPI code is NCT6776_SHOW_KBC, so update the comments to reflect that. Change-Id: I9ba69384866088f84a516557d76864104a024968 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-07-26sio/smsc/fdc37n972: add missing pnp_conf_mode field to ops structFelix Held
This patch makes it possible to enter the config mode of the super IO chip, so that changes can be made to the configuration registers. Change-Id: I7e31eaf217b3af2226c1e7d2f14f2ef7b0d7ddbe Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2018-07-25superio/winbond: remove LDN-specific ops overridesFelix Held
The pnp ops struct is already passed to the pnp_enable_devices function and it is used if no override is supplied in the elements of the pnp_info struct array Change-Id: I4311834f3970bd3471f2f5a73ca7da3c03936d37 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-25superio/via: remove LDN-specific ops overridesFelix Held
The pnp ops struct is already passed to the pnp_enable_devices function and it is used if no override is supplied in the elements of the pnp_info struct array Change-Id: I14dbeda9832a25116cf53c36197615e9d02d5134 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-25superio/renesas: remove LDN-specific ops overridesFelix Held
The pnp ops struct is already passed to the pnp_enable_devices function and it is used if no override is supplied in the elements of the pnp_info struct array Change-Id: I42469c844074db57071d0191d12d8fd64f462672 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-25superio/intel: remove LDN-specific ops overridesFelix Held
The pnp ops struct is already passed to the pnp_enable_devices function and it is used if no override is supplied in the elements of the pnp_info struct array Change-Id: I5bd525532c01b3b9f7ddbc8eab42caa8b7f30795 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-25superio/fintek: remove LDN-specific ops overridesFelix Held
The pnp ops struct is already passed to the pnp_enable_devices function and it is used if no override is supplied in the elements of the pnp_info struct array Change-Id: Ic6387032e043b6ad9e9ceefd2fcc1cdf843e2989 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-24superio/nuvoton/npcd378: Add ACPI code for S3 resumePatrick Rudolph
Configure SuperIO on shutdown to keep devices enabled, set green LED to fading on sleep and normal on wake. Add SSDT to write LDN4 IOBASE addresses stored in devicetree.cb. Tested on HP8200: * Wakes from power button or USB keyboard. * LED is fading Change-Id: I2035249a39616aa2d87bd93f9e49c70d231546cc Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-22superio/nuvoton/npcd378: Fix resource sizePatrick Rudolph
Based on vendor ACPI code. Change-Id: I4d6785efb9d18953042775e7164710ef3c041ed5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-18superio/nsc: pass the chip-specific ops struct to pnp_enable_devicesFelix Held
Pass the address of the chip-specific ops struct instead of the one of the generic pnp_ops struct to the PNP device enable function. This allows the removal of the LDN-specific ops overrides which is also done in this patch. Change-Id: I0c820254e97e3f80470d148552af06940e147b74 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/23008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-07-18superio/smsc: pass the chip-specific ops struct to pnp_enable_devicesFelix Held
Pass the address of the chip-specific ops struct instead of the one of the generic pnp_ops struct to the PNP device enable function. This allows the removal of the LDN-specific ops overrides which is also done in this patch. Change-Id: I16e485494e448ae02e0a7b9e21b90ddbb1a53a4b Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/23007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-18superio/ite: pass the chip-specific ops struct to pnp_enable_devicesFelix Held
Pass the address of the chip-specific ops struct instead of the one of the generic pnp_ops struct to the PNP device enable function. This allows the removal of the LDN-specific ops overrides which is also done in this patch. Change-Id: I5f03a4064778c419f4b9c50e70db1296addf6c9e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/23006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-18superio/nuvoton: remove LDN-specific ops overridesFelix Held
The pnp ops struct is already passed to the pnp_enable_devices function and it is used if no override is supplied in the elements of the pnp_info struct array Change-Id: I18345d7cc50a7d46cb15584dfb54df28e8534f81 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-06superio: move files to match the common naming schemeFelix Held
Change-Id: I1a8fc34aaaf42514c8af97ab155ff2712e7a5448 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/23009 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-14src: Use of device_t is deprecatedElyes HAOUAS
Change-Id: I9cebfc5c77187bd81094031c43ff6df094908417 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04src/superio/{ite,smsc}: Remove space before tabElyes HAOUAS
Change-Id: I2829e4cb1445f8412f57da10fda6b92c92e56ea0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-01superio/nuvoton/npcd378: Add PSU fan controlPatrick Rudolph
Implement method to access the SuperIO's harware monitor (HWM) IO space. Set the PSU fan using a new CMOS option psu_fan_lvl. Add the CMOS option to all board that use NPCD378. In case no CMOS is set use the default fan level 3. The HWM space can be written to at any time, but the SuperIO has to be notified that a write is ongoing. After clearing the write-lock bit all changes are applied at once. Tested on HP Compaq 8200 SFF. Change-Id: I56ce7ad1df88638589a577b8a09d5d775557887b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26050 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-15superio/ite/it8720f: Implement power controlSamuel Holland
Program the Super I/O to turn the machine on or restore its power state when AC power is restored. Based on code from src/superio/nuvoton/nct5572d/superio.c. Change-Id: I1f3432f43b0784c3696bf1d7233b83d3a203af20 Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-on: https://review.coreboot.org/25463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-14superio/nuvoton: Add support for NPCD378Patrick Rudolph
The NPCD378 can be found on at least: * HP Compaq 8200 * HP Compaq 8300 The datasheet is not publicly available, as HP implements lots of custom hardware. Add basic support for it, based on HP Compaq 8200. The first eight LDNs seem to be standard nuvoton compatible, except for LDN4, which is used to control front LED and power in ACPI S3. LDN8 provides access to HP's proprietary HWM which is accessiable at the LDN's IOBASE with a size of 0x100 bytes. The HWM consists of 16 pages with each holding 0xff bytes. The pages can be selected by writing the page index to IOBASE + 0xff. TODO: Reverse engineer the HWM to support fan control. WARNING: The remaining LDNs have been guessed and might be wrong! The serial has been tested and is working. Change-Id: Ib497fd41b88e9c159eeeffa69bc2bfdccee9cb38 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/25384 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-12superio/ite/it8623e: initialize the PWM fan controllerKevin Cody-Little
Copies the common/env_ctrl support code from the it8728f driver. Tested on an ASUS AM1I-A using Linux 4.16.7-gentoo as payload, and booting userspace without a kexec call. Prior to this change, an error was given during boot: it87 it87.656: Detected broken BIOS defaults, disabling PWM interface After this change, the message is gone, and PWM fan control works through the /sys/class/hwmon interface. Change-Id: Id97c4ec19562e7c78308c5afe6ff7c938922c9e7 Signed-off-by: Kevin Cody-Little <kcodyjr@gmail.com> Reviewed-on: https://review.coreboot.org/26224 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-04superio/ite/common: Add options to enable beepsVagiz Trakhanov
Add device tree options to enable beeps when exceeding temperature, voltage, and fan limits. As of this commit, setting voltage and fan limits is not implemented. Change-Id: I57ce622ee4498b75f00e678c2e6d72e499925bce Signed-off-by: Vagiz Trakhanov <rakkin@autistici.org> Reviewed-on: https://review.coreboot.org/22141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-01-15Intel i3100 boards & chips: Remove - using LATE_CBMEM_INITMartin Roth
All boards and chips that are still using LATE_CBMEM_INIT are being removed as previously discussed. If these boards and chips are updated to not use LATE_CBMEM_INIT, they can be restored to the active codebase from the 4.7 branch. chips: northbridge/intel/i3100 southbridge/intel/i3100 superio/intel/i3100 cpu/intel/socket_mPGA479M Mainboards: mainboard/intel/truxton mainboard/intel/mtarvon mainboard/intel/truxton Change-Id: Ic2bbdc8ceb3ba0359c120cf4286b0c5b7dc653bb Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/22031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-01-07superio/ite/it8623e: add support for SIO chip ITE IT8623EGergely Kiss
This change adds basic support for the SuperIO chip ITE IT8623E. Due to the lack of a datasheet, defaults are shown as "not available (NA)" in superiotool's register dump. LDNs defined in it8623e.h are definitely correct and working as expected. Change-Id: I05832c4db7ab59541337f11200640316376e792e Signed-off-by: Gergely Kiss <mail.gery@gmail.com> Reviewed-on: https://review.coreboot.org/23001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-01-07superio/f71869ad: Add temperature sensor typeRenze Nicolai
This patch makes it possible to set the "Temperature Sensor Type Register" at index 6Bh from the devicetree, allowing the use of thermistors instead of BJT type sensors. Register documentation (from page 60 of the F71869 datasheet): 6.6.25 Temperature Sensor Type Register - Index 6Bh Bit 7-4: reserved Bit 3: T3_MODE (0: thermistor, 1: BJT [default]) Bit 2: T2_MODE (0: thermistor, 1: BJT [default]) Bit 1: T1_MODE (0: thermistor, 1: BJT [default]) Bit 0: reserved Change-Id: I6af0d93061ec49aec7a9181cdf7affd60fbdca73 Signed-off-by: Renze Nicolai <renze@rnplus.nl> Reviewed-on: https://review.coreboot.org/22935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-01-07nuvoton/nct6776: Add ACPI declarationsTobias Diedrich
Add ACPI declarations to be incorporated into ACPI tables for mainboards with this super I/O. Tested on Intel NUC DCP847SKE, Linux 4.13.14. Change-Id: Idb76b2e99e90a213e2695efc1afd4fa9069c134f Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/22808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-01-06superio/ite: add missing pnp_conf_mode fields in ops structFelix Held
This fixes the bug that the LDNs on the affected SIO chips didn't get configured, since the config mode wasn't entered. Change-Id: Ic468847571e164e4e1280428f08fc067b724464e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/23004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-12-02winbond/w83977tf: Add ACPI declarationsKeith Hui
Add ACPI declarations to be incorporated into ACPI tables for mainboards with this super I/O. Change-Id: If113807901619bc0f4250607546be415f9e5e45b Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/21670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-11-30nuvoton/nct5572d: Disable mouse controller also during resumePaul Menzel
Currently, having a keyboard connected to the PS/2 controller of the ASRock E350M1, after suspending and resuming the system, the keyboard does not work anymore. A similar problem is documented in commit 448e3863 (drivers/pc80: Add PS/2 mouse presence detect) [1]. There is no reason to not disable the controller during resume. Also, that way, the PS2 ASL method does not need to be overriden. [1] https://review.coreboot.org/13165 TEST=Resume system, and notice PS/2 keyboard works. Change-Id: I51dc446861120f80bc9ffc4cc54b86e317d99689 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/22287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-11-30superio: Log if mouse controller is disabledPaul Menzel
It’s useful to know, if the mouse controller is disabled or not, so convert the comment to a log message. Change-Id: Ic3f7d5b7b98cf8c258a6a601f4a44ce403f4a576 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/22285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-10-25superio/acpi/pnp.asl: Fix PNP_READ_DMA/PNP_WRITE_DMA macrosKeith Hui
These macros, broken since day one, should CreateByteField instead of CreateWordField. Without the fix, any ASLs that try to use it will fail to compile with a "ResourceTag smaller than Field" warning. Change-Id: Ieeb509aece8836785998b23fdc805a747d40a77a Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/22066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-22superio/ite/common: Make PECI a thermal modeVagiz Trakhanov
Instead of setting "peci_tmpin" in the devicetree, THERMAL_PECI is now a mode of TMPIN like THERMAL_RESISTOR and THERMAL_DIODE. Since the logic to set temperature offsets and limits is in the function that sets thermal modes, it makes sense to treat PECI as yet another mode. As of this commit, there are no boards that actually use peci_tmpin from ite/common. There are three boards that have a similar device tree option, but those boards use it8772f, which implements all superio functions on its own. The first user will probably be Gigabyte GA-Z77-DS3H. Change-Id: I39da50c124ad767f8681302733cf004622975e81 Signed-off-by: Vagiz Trakhanov <rakkin@autistici.org> Reviewed-on: https://review.coreboot.org/22076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-22superio/ite/common: Add temperature limitsVagiz Trakhanov
Add devicetree options to set temperature limits that are used to alarm user when temperature exceeds defined values. Audio alerts by superio are not implemented yet, but since limits are visible to userland, some software might use them as is. For instance, lm-sensors displays "ALERT" when temperature exceeds limits. Change-Id: I56e041fb78f518d6a9640dc2b3985459991242b9 Signed-off-by: Vagiz Tarkhanov <rakkin@autistici.org> Reviewed-on: https://review.coreboot.org/21844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-22superio/ite/common: Add temperature offsetVagiz Trakhanov
Add a devicetree option to set temperature adjustment registers required for thermal diode sensors and PECI. However, this commit does not have the code needed to make PECI interface actually use these registers. It only applies to diodes. As a temporary workaround, one can set both THERMAL_DIODE and peci_tmpin to the same TMPIN, e.g. TMPIN3.mode="THERMAL_DIODE" and peci_tmpin="3". PECI, apparently, takes precedence over diode, so the adjustment register will be set and PECI activated. Or simply use the followup patch, which makes THERMAL_PECI a mode like THERMAL_DIODE. I don't have hardware to test THERMAL_DIODE mode, but in case of PECI, without this patch I had about -60°C on idle. Now, with offset 97, which was taken from vendor bios, PECI readings became reasonable 35°C. TEST=Set a temperature offset, then ensure that the value you set is reflected in /sys/class/hwmon/hwmon*/temp[1-3]_offset Change-Id: Ibce6809ca86b6c7c0c696676e309665fc57965d4 Signed-off-by: Vagiz Tarkhanov <rakkin@autistici.org> Reviewed-on: https://review.coreboot.org/21843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-21winbond/w83627hf: Drop early_init.cKeith Hui
Once w83627hf_set_clksel_48() is unified into winbond/common/early_init.c by /c/21331 (Unify w*_set_clksel_48()), this file is no longer needed and can be dropped. Build tested on select affected mainboards. Change-Id: I6a5e27fdd48c6e002c3a39dc92fef77e85aea209 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/21474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-09-21winbond/w83697hf: Drop early_serial.cKeith Hui
It is already using winbond_enable_serial(). Once w83697hf_set_clksel_48() is unified into winbond/common/early_init.c, this file is no longer needed and can be dropped. Change-Id: I7424233b5d70e143721038493f194760f07346a1 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/21332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-21superio/winbond/*: Unify w*_set_clksel_48()Keith Hui
This function is identical throughout all Winbond superios in the tree, so move it into superio/winbond/common/early_init.c, renamed from early_serial.c because it now does more than just early serial. Change all affected mainboards to use the unified function. Change-Id: If05e0db93375641917e538d83aacd1b50fbd033b Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/21331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-21superio/winbond/w83627*: Remove deprecated codeKeith Hui
Early serial for W83627[HF|EHG] superios are handled by superio/winbond/common/early_serial.c. Remove code thus deprecated. Build tested on select affected mainboards. Change-Id: Idad6e0281f7a272e184feff686ce1407825429c7 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-15superio/winbond/w83977tf: Drop early_serial.cKeith Hui
Early serial init on this superio is done by superio/winbond/common/early_serial.c and no board currently references this instance anymore. Change-Id: Iab8dd93663fc78ed0d8c6a5313bb6a1884d1a043 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-06sio/smsc/kbc1100: Fix some style issuesArthur Heymans
This fixes indentation and whitespaces before opening parentheses. Change-Id: I8940f712c0161419ee0c383b7bc9eb581967366e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-07-08superio/ite/it8716f: Update init_ecMartin Roth
This is a follow-on to the superio IS_ENABLED() patch: https://review.coreboot.org/#/c/20351/1 Change-Id: I7d070e3964609947959de60e2686dfe59fe77e1c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-07-07src/superio: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Change-Id: Ie9a7127b50db8dc9a2b543843ca4d815afe3d07e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>