summaryrefslogtreecommitdiff
path: root/src/superio
AgeCommit message (Collapse)Author
2013-07-20it8728f: Add ITE IT8728F superio early serial support.Damien Zammit
This is the first of a series of patches to provide support for a new mainboard, Gigabyte GA-B75M-D3V. This patch provides early serial for the superio and has been tested on this mainboard. The code is based on IT8718F superio. Change-Id: I5636199b49314166ed3b81e60b41131964dd44ff Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/3794 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2013-07-10w83627hf/acpi: Fix endianess error in floppy drive enumeration codeChristoph Grenz
The enumeration results are stored as five DWORDs in one 20 byte buffer. Bytes 3, 7, 11 and 15 were used to set the lowest bit of each DWORD. ACPI uses little endian, so 1, 4, 8 and 12 are the correct indices. Change-Id: I793225cb1bb62fd148ecfa1e61e02f5d7be62cdb Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de> Reviewed-on: http://review.coreboot.org/3602 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-04w83627hf/acpi: Fix offset of logical device activationNico Huber
The PnP's logical device activation normally resides at 0x30. This might have been overlooked as 0x29 looks very close to 0x30 in human eyes. Change-Id: Id5d5a92f2683ebe1808b943f686c062151d216da Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3592 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-07-04w83627hf/acpi: Fix type error in floppy drive enumeration codeChristoph Grenz
The enumeration method tried to evaluate an one-byte OperationRegion instead of a field in this OperationRegion, which resulted in an AE_TYPE error at runtime. Indexing the OperationRegion with a single field fixes this error. Change-Id: I15dd7aa6ecafb3a215d165d2b721003446815025 Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de> Reviewed-on: http://review.coreboot.org/3603 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-03winbond/w83627dhg: Fix logical device power down in ACPINico Huber
The W83627DHG has some power managements bits to power down individual logical devices. These are called `* Power Down`. Counterintuitively and in contrast to `Immediate Power Down` (bit to power down the whole chip), these bits are set when the respective logical device is powered. Unfortunately, our ACPI code set them wrong which led to disabled devices after a S3 suspend/resume. Adding an option how to set the PM bits and setting them to zero for the W83627DHG, corrects it. Tested with kontron/ktqm77. Change-Id: I8a472d480d4277721bd17c9f7c2ce44fa84e8ae2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3590 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-03pnp: Add some default functions to enter/exit config stateNico Huber
Implement some common default functions to enter and exit the configuration state. Also provide default pnp_mode_ops for common enter()/exit() function pairs. The following cocci ensures their use: @ mode_match @ identifier enter, exit, ops; @@ struct pnp_mode_ops ops = { .enter_conf_mode = enter, .exit_conf_mode = exit, }; @ enter_match_8787 @ identifier mode_match.enter, dev; @@ enter(...) { outb(0x87, dev->path.pnp.port); outb(0x87, dev->path.pnp.port); } @ depends on enter_match_8787 @ identifier mode_match.enter, mode_match.ops; @@ struct pnp_mode_ops ops = { - .enter_conf_mode = enter, + .enter_conf_mode = pnp_enter_conf_mode_8787, }; @ enter_match_55 @ identifier mode_match.enter, dev; @@ enter(...) { outb(0x55, dev->path.pnp.port); } @ depends on enter_match_55 @ identifier mode_match.enter, mode_match.ops; @@ struct pnp_mode_ops ops = { - .enter_conf_mode = enter, + .enter_conf_mode = pnp_enter_conf_mode_55, }; @ depends on enter_match_8787 || enter_match_55 @ identifier mode_match.enter; @@ -enter(...) {...} @ exit_match_aa @ identifier mode_match.exit, dev; @@ exit(...) { outb(0xaa, dev->path.pnp.port); } @ depends on exit_match_aa @ identifier mode_match.exit, mode_match.ops; @@ struct pnp_mode_ops ops = { - .exit_conf_mode = exit, + .exit_conf_mode = pnp_exit_conf_mode_aa, }; @ depends on exit_match_aa @ identifier mode_match.exit; @@ -exit(...) {...} @ depends on enter_match_8787 || enter_match_55 || exit_match_aa @ @@ #include <device/pnp.h> +#include <superio/conf_mode.h> @ mode_match_55_aa @ identifier ops; @@ struct pnp_mode_ops ops = { .enter_conf_mode = pnp_enter_conf_mode_55, .exit_conf_mode = pnp_exit_conf_mode_aa, }; @@ identifier mode_match_55_aa.ops; @@ -struct pnp_mode_ops ops = {...}; @@ identifier mode_match_55_aa.ops, devops; @@ struct device_operations devops = { - .ops_pnp_mode = &ops, + .ops_pnp_mode = &pnp_conf_mode_55_aa, }; @ mode_match_8787_aa @ identifier ops; @@ struct pnp_mode_ops ops = { .enter_conf_mode = pnp_enter_conf_mode_8787, .exit_conf_mode = pnp_exit_conf_mode_aa, }; @@ identifier mode_match_8787_aa.ops; @@ -struct pnp_mode_ops ops = {...}; @@ identifier mode_match_8787_aa.ops, devops; @@ struct device_operations devops = { - .ops_pnp_mode = &ops, + .ops_pnp_mode = &pnp_conf_mode_8787_aa, }; Change-Id: I1480336b54523cc95210d99cf31c1a0b3a14b464 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3484 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2013-07-01w83627hf: Add comments about parallel port modes in superio.aslChristoph Grenz
Add comments in PAR0._PRS explaining which dependent resource descriptor puts the parallel port into EPP or SPP mode. Change-Id: If4e224dbaf6f9105cde88d995d2e7c74fbf14502 Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de> Reviewed-on: http://review.coreboot.org/3495 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-06-18winbond/w83627dhg: Correct resource setting for SPI (LDN6)Nico Huber
The SPI logical device on the W83627DHG uses the second i/o port register pair but not the first one. So we have to also set `io1` (the second io_info struct) and not `io0` in the pnp_info structure. Setting the PNP_IO1 flag without a mask in `io1` caused coreboot to hang in pnp_enable_devices() until commit aeead274 which added a check for an unset mask. Change-Id: I027d279b4641fecd88afb14d40fbe1c0bfbf81bb Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3391 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-17pnp: Remove now plain wrappers for default PnP functionsNico Huber
After removing the enter()/exit() functions for configuration mode, most wrappers for our standard PnP functions just call the underlying default implementation. Remove those with a little cocci: @ op_match @ identifier op; identifier pnp_op =~ "^pnp_((alt_|)enable|(set|enable)_resources)$"; type device_t; identifier dev; @@ static void op(device_t dev) { pnp_op(dev); } @@ identifier op_match.op; @@ -op(...) {...} /* Three rules to match the alignment, hmmp... */ @@ identifier op_match.op, op_match.pnp_op; identifier ops; @@ struct device_operations ops = { - .set_resources = op, + .set_resources = pnp_op, }; @@ identifier op_match.op, op_match.pnp_op; identifier ops; @@ struct device_operations ops = { - .enable_resources = op, + .enable_resources = pnp_op, }; @@ identifier op_match.op, op_match.pnp_op; identifier ops; @@ struct device_operations ops = { - .enable = op, + .enable = pnp_op, }; Change-Id: Idc0e52c7e3600a01f3b6a4e17763557b271b481e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3483 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17pnp: Register implementations of enter/exit config stateNico Huber
Find all the (ramstage) implementations of enter()/exit() functions for the configuration state, register and call them through the new struct pnp_mode_ops. As our standard PnP functions are aware of the pnp_mode_ops, it's not necessary to call enter()/exit() around them anymore. Patch generated with the cocci below. It's not perfect. The movement of the enter()/exit() calls is somehow fragile. So I checked the remaining calls for sense, and changed some empty lines. Also a duplicate insertion of pnp_conf_mode_ops had to be removed. /* Try to find enter and exit functions by their outb() structure and their usage around calls to our standard pnp functions: */ @ enter_match @ identifier enter; identifier dev; type device_t; @@ void enter(device_t dev) { <... outb(..., dev->path.pnp.port); ...> } @ exit_match @ identifier exit; identifier dev; type device_t; @@ void exit(device_t dev) { <... outb(..., dev->path.pnp.port); ...> } @ pnp_match @ identifier op; identifier pnp_op =~ "^pnp_((alt_|)enable|(set|enable)_resources)$"; identifier enter_match.enter, exit_match.exit; type device_t; identifier dev; @@ void op(device_t dev) { ... enter(dev); ... pnp_op(dev); ... exit(dev); ... } /* Now add enter/exit to a pnp_mode_ops structure: */ @ depends on pnp_match @ identifier enter_match.enter; identifier exit_match.exit; identifier ops; @@ +static const struct pnp_mode_ops pnp_conf_mode_ops = { + .enter_conf_mode = enter, + .exit_conf_mode = exit, +}; + struct device_operations ops = { ..., + .ops_pnp_mode = &pnp_conf_mode_ops, }; /* Match against the new structure as we change the code and the above matches might not work anymore: */ @ mode_match @ identifier enter, exit, ops; @@ struct pnp_mode_ops ops = { .enter_conf_mode = enter, .exit_conf_mode = exit, }; /* Replace enter()/enter() calls with new standard calls (e.g. pnp_enter_conf_mode()): */ @@ identifier mode_match.enter; expression e; @@ -enter(e) +pnp_enter_conf_mode(e) @@ identifier mode_match.exit; expression e; @@ -exit(e) +pnp_exit_conf_mode(e) /* If there are calls to standard PnP functions, (re)move the enter()/exit() calls around them: */ @@ identifier pnp_op =~ "^pnp_((alt_|)enable|(set|enable)_resources)$"; expression e; @@ -pnp_enter_conf_mode(e); pnp_op(e); +pnp_enter_conf_mode(e); ... pnp_exit_conf_mode(e); @@ identifier pnp_op =~ "^pnp_((alt_|)enable|(set|enable)_resources)$"; expression e; @@ pnp_enter_conf_mode(e); ... +pnp_exit_conf_mode(e); pnp_op(e); -pnp_exit_conf_mode(e); @@ expression e; @@ -pnp_enter_conf_mode(e); -pnp_exit_conf_mode(e); Change-Id: I5c04b0c6a8f01a30bc25fe195797c02e75b6c276 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3482 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17pnp: Provide alternative pnp_enable() implementationNico Huber
The current default implementation of pnp_enable() only disables devices - if set so in the devicetree - but does not enable them. Enablement takes place in pnp_enable_resources(). Yet, many PnP chips implement their own version of pnp_enable() which also enables devices if set in the devicetree. It's arguable, if enabling those devices makes sense, before they get resources assigned. Maybe we can't write the resource registers if not, who knows? The least we can do is providing a common implementation for this behavior, and get rid of some code duplication. Used the following cocci: @@ expression e; @@ +pnp_alt_enable(e); -pnp_set_logical_device(e); ( -pnp_set_enable(e, !!e->enabled); | -(e->enabled) ? pnp_set_enable(e, 1) : pnp_set_enable(e, 0); | -if (e->enabled) { pnp_set_enable(e, 1); } -else { pnp_set_enable(e, 0); } ) Change-Id: I8d695e8fcd3cf8b847b1aa99326b51a554700bc4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3480 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17pnp: Unify some alignment to ease autogenerating patchesNico Huber
Most PnP drivers align the initialization of their `device_operations` with spaces. Unify this, so next autogenerated patches always match the alignment. Change-Id: I3f6baef6c8bb294c136354754125ea88c07a61a1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3479 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-11winbond/w83627dhg: Add ACPI supportNico Huber
This is loosely based on Christoph Grenz' ACPI code for the W83627HF and makes use of the PnP super i/o ACPI framework. Change-Id: I5e1cd09b83c0041f440562d2a1b73e4560589cb7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3288 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-11Start ACPI framework for PnP (super i/o) devicesNico Huber
I'm trying to make writing ACPI code for super i/o devices more comfortable. pnp.asl hosts some general cpp macros. The other four files are to be included in dsdt trees. They are controlled by cpp macros which should be defined/undefined before inclusion. Work was inspired by Christoph Grenz' ACPI code for the W83627HF. Change-Id: Idb55332ba9bc788c98964d30a450e0d734cf28ec Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3286 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-10Drop prototype guarding for romccStefan Reinauer
Commit "romcc: Don't fail on function prototypes" (11a7db3b) [1] made romcc not choke on function prototypes anymore. This allows us to get rid of a lot of ifdefs guarding __ROMCC__ . [1] http://review.coreboot.org/2424 Change-Id: Ib1be3b294e5b49f5101f2e02ee1473809109c8ac Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3216 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-12Add new superio deviceSteven Sherk
- Added in new support for Nuvoton NCT5104D LPC device. Change-Id: I0af8c5e3e46fdd0a549475b30917897ae9e144a7 Signed-off-by: Steven Sherk <steven.sherk@se-eng.com> Reviewed-on: http://review.coreboot.org/3072 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01Winbond W83627HF: Rename and move ASL snippet to `acpi/superio.asl`Paul Menzel
Put the ASL snippet for inclusion in the DSDT under the `acpi/` folder as it is done for the other Super I/O devices. $ find src/superio/ -name *asl src/superio/ite/it8772f/acpi/superio.asl src/superio/smsc/mec1308/acpi/superio.asl src/superio/smsc/sio1007/acpi/superio.asl src/superio/winbond/w83627hf/devtree.asl As there are no users of this file yet, no other adaptations need to be made. Change-Id: Id10cd8897592b780c9fd3bd6b45ada4cf1fcf33e Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2937 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
Here's the great news: From now on you don't have to worry about hitting the right io.h include anymore. Just forget about romcc_io.h and use io.h instead. This cleanup has a number of advantages, like you don't have to guard device/ includes for SMM and pre RAM anymore. This allows to get rid of a number of ifdefs and will generally make the code more readable and understandable. Potentially in the future some of the code in the io.h __PRE_RAM__ path should move to device.h or other device/ includes instead, but that's another incremental change. Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-15Super I/O W83627DHG: Enable UART B by redirecting pinsWolfgang Kamp
Pins 78-85 are set to GPIO after power on or reset. To enable UART B the pins must be redirected to it. Look at W83627DHG databook version 1.4 page 185 Chip (global) Control Register CR2C. Change-Id: I12b094a60d9c5cb2447a553be4679a4605e19845 Signed-off-by: Wolfgang Kamp <wmkamp@datakamp.de> Reviewed-on: http://review.coreboot.org/2626 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2013-03-06AMD SB800: don't switch clock from 14 to 48 MHz for smscsuperioJens Rottmann
The power up default for the 14M_25M_48M_OSC switchable clock output ball of the SB800 chipset is 14 MHz. sb800/bootblock.c changes this to 48 MHz, which is the correct value for almost all SIOs. However, not for 'smscsuperio' (SMSC SCH311x), which needs the original 14 MHz and is not configurable for other clock speeds. A wrong SIO clock supply results in funny RS232 output (wrong bit speed) and non-working PS/2. We could switch back to 14 MHz in the mainboard's romstage.c, but then the clock frequency would change twice. The resulting short 48 MHz burst causes a handful of rubbish characters on RS232 on every boot until the SIO clock has stabilized again. This patch skips the SB800 clock switch if the SIO Kconfig requests 14 MHz. This does not affect any boards currently in the repository (yet). Change-Id: Icff41fd88dc41c08f3700ab4f786852f04eff2a4 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2454 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-28Remove assembly coded log2 functionRonald G. Minnich
As we move to supporting other systems we need to get rid of assembly where we can. The log2 function in src/lib is identical to the assembly one (tested for all 32-bit signed integers :-) and takes about 10 ns to run as opposed to 5ns for the non-portable assembly version. While speed is good, I think we can spare the 15 ns or so we add to boot time by using the C version only. Change-Id: Icafa565eae282c85fa5fc01b3bd1f110cd9aaa91 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/1928 Tested-by: build bot (Jenkins)
2012-11-06smsc/lpc47n227: Make early_serial usablePatrick Georgi
This is the smallest possible change to make early_serial.c compile when included from romstage.c. early_serial could be reworked to be built as separate unit (romstage-y), but that should be done for all SuperIOs, not some individual outlier. Change-Id: I90ee66b43c9677b86b1b5d6fcc8febfbe58d80dd Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1686 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-07Remove chip.h files without config structureKyösti Mälkki
Also deletes files not included in build: src/southbridge/amd/cimx/sb700/chip_name.c src/southbridge/amd/cimx/sb800/chip_name.c src/southbridge/amd/cimx/sb900/chip_name.c Change-Id: I2068e3859157b758ccea0ca91fa47d09a8639361 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1473 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-09-07superio winbond w83627dhg: add a function which is used on tyan s8226Siyuan Wang
this function is used on serial output of tyan s8226 Change-Id: I5f7fa535b922b224e381886f1bea64623fa549ef Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1494 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-22Auto-declare chip_operationsKyösti Mälkki
The name is derived directly from the device path. Change-Id: If2053d14f0e38a5ee0159b47a66d45ff3dff649a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1471 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-04SuperIO LPC47N217: Remove warningszbao
Change-Id: Id5756f1bb748ae7bec0bcdc21804f5338e850baa Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1402 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-09servengines/pilot superio: add attribute unusedSven Schnelle
Not all users use both functions, so add __attribute__((unused)) to prevent compiler errors. Change-Id: I8485bb9150b04d1f9fdc231152a43bcd6fc713a7 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1193 Tested-by: build bot (Jenkins)
2012-05-10Unmark source files as executablesAlec Ari
Change source file modes from 755 to 644 The following files have been grepped for changes: *.c *.h *Kconfig* *Makefile* Change-Id: I275f42ac7c4df894380d0492bca65c16a057376c Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/1023 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-04-27SMSC MEC1308: Fix ACPI code to work with newer IASL versionsStefan Reinauer
Newer versions of IASL didn't like our IO constructs. Use FixedIO instead, it's also shorter. Change-Id: I9364d993ecb71ffd84c0313ca1e2f870af59eb24 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/934 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-06Add support for SMSC MEC1308/1310 SuperI/O ECStefan Reinauer
Change-Id: If7921a66bab35f72c8455d5f0befc32a514ab417 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/825 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-06Add initial support for SMSC SIO1007 SuperI/O chipStefan Reinauer
early_serial and some ACPI needed for compilation Change-Id: I5dd970676488697156e0630392884f31149ac85b Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/824 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-06Add support for SMSC LPC47N207 SuperI/O chipStefan Reinauer
This includes only early serial support for now. Change-Id: I9a2a439e1d17a989428033fdb4a4b813553dab6d Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/823 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-02Add support for ITE IT8772F SuperI/O chipStefan Reinauer
Change-Id: I8e80c22eb0f3cb68f2457be6b2e7894df60ed632 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/822 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-02-17SIO: Add smsc sio1036 superioKerry Sheh
Change-Id: Iaf5519f304f9f16f7ff6e4b02060bb75a3605ce9 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/563 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-17SIO: Add smsc/sch4037 superio supportKerry Sheh
Change-Id: I3b113a27541b8efd096f3bd44e6621344ec916a5 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/562 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-16SIO: Winbond w83627dhg updateKerry Sheh
1. Stop include c file. 2. W83627dhg Pin 89, Pin 90 are multi function pins, add support to select them to I2C function. Change-Id: I42eaaf7d70aa48d7edf2710349b51e401526c1a6 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/565 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-05SIO: condition compile Nuvoton WPCM450 early_init.cKerry Sheh
Compile Nuvoton WPCM450 early_init.c when CONFIG_SUPERIO_NUVOTON_WPCM450 Change-Id: Ie31b8ae6aa45d6f77efa2b61e215ba0987abf878 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/566 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-01-11W83627HF: remove unused functionSven Schnelle
When CONFIG_EXPERT is set, compilation fails with: src/superio/winbond/w83627hf/superio.c:61:13: error: ‘w83627hf_16_bit_addr_qual’ defined but not used [-Werror=unused-function] cc1: all warnings being treated as errors This function isn't used in the code, so just remove it. Change-Id: I117e221fb3c3a20a7d7e7e2e86d7dbfdffc2cbff Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/533 Tested-by: build bot (Jenkins)
2011-11-22implement hwmon fan divisor setting for w83697hfFlorian Zumbiehl
Change-Id: I887ac1142875ca1dc1a1eb8eebec402fbe7512c3 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/384 Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Tested-by: build bot (Jenkins)
2011-11-08make w83697hf_set_clksel_48() non-static and add a prototypeFlorian Zumbiehl
make w83697hf_set_clksel_48() non-static and add a prototype so as to get rid of warnings about it being unused Change-Id: I8ae94cfd61ae4774a367f83dd37e488987e2451a Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/380 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-07Add code to set the clock speed for Winbond W83627THF/THG.Idwer Vollering
Change-Id: I984404dd1df50b3ba423ac610283b9bf8bca5a31 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/412 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-06w83627hf: multiple fixes and enhancements in ASL includeChristoph Grenz
Fix multiple copy&paste errors and some other bugs in devtree.asl. Redesign ENCM method to enter configuration mode and set LDN by parameter. Reordered and commented some statements to make the code a bit more readable. Add an ifdef to enable never showing the keyboard controller as disabled, which seems to cause bugs at least with some Linux kernels. Remove keyboard controller IO regions from PS/2 mouse device as e.g. Linux infers them from the keyboard controller device. Change-Id: I44611339fabe31a8a584a3e6bd225082bfdd0b8e Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de> Reviewed-on: http://review.coreboot.org/357 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-06w83627hf: drop Scope(\_SB) from ASL includeChristoph Grenz
Drop explicit Scope(\_SB) from devtree.asl as it forces the SuperIO to appear as child of the root device. devtree.asl then needs to be included at a reasonable position inside the \_SB device tree. Change-Id: I72a57eddc5ec5f9763fdf789094a7be042758256 Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de> Reviewed-on: http://review.coreboot.org/298 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-01remove trailing whitespaceStefan Reinauer
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-28w83627hf: add method to retrieve wake event source register to ASL includeChristoph Grenz
Add a method WAKS to devtree.asl which returns the wake-up source register to simplify retrieving the wake source e.g. in \_WAK. Change-Id: Ia258f8fc9ff79b18391c55464da73863889e2255 Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de> Reviewed-on: http://review.coreboot.org/297 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-25w83627hf: correct typo in ASL include, correct indexed registers and remove ↵Christoph Grenz
unneccesary _PR0 defs Correct a typo in devtree.asl which causes AML processors to fail executing the DSDT with AE_NO_MEMORY or (in case of acpiexec) Divide By Zero. Also removes an superfluous item in the register IndexField and removes unneccessary _PR0 definitions which could confuse AML processors. Change-Id: I02cb9ce4e8f2101cfff8cec4abba7e070fd66364 Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de> Reviewed-on: http://review.coreboot.org/296 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-18Append logical PME/GPIO device. Fix MPU device number.Kyösti Mälkki
A mainboard may require configuration of the superio pins to fully support some features. Things like A20# gate, leds, fans, infra-red and bootstrap jumpers may be configured and controlled through the logical PME device. Change-Id: I6e77ff0295806ba3dff339013f73d99c2961388f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/289 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-12w83627hf: ASL include containing virtual device tree of the SuperIOChristoph Grenz
Add a ACPI Source Language snippet to superio/w83627hf which maps the SuperIO and most of the logical devices to PnP devices, exposing configuration options and chip power management to the OS. Written using the Winbond W83627HF/F datasheet. Change-Id: I1108d29b341ef78fe7f1e574f98b680aada39daf Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de> Reviewed-on: http://review.coreboot.org/223 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>