summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-09-21volteer: set GSPI CS to deasserted by defaultCaveh Jalali
This sets the state of GSPI chip select to 1 (deasserted) as applied by the FSP during the silicon init phase. GSPI 0 and 1 are set to CS mode manual in the SerialIoGSpiCsMode section which means we need to explicitly configure CS to deasserted in the SerialIoGSpiCsState section. GSPI0 is the CR50 and GSPI1 is the fingerprint sensor. We were running into problems where the normal expected CS toggle sequence to wake up CR50 did not work because CS was already asserted when it was expected to be deasserted, leading to TPM timeouts. BUG=b:168090038 TEST=booted on volteer, no more "TPM flow control failure" messages; verified fingerprint enrollment still works. Change-Id: I47aa5db429d75e66095d58a1eb77963dcfc3b9f3 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45384 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21mb/google/volteer: Add firmware configuration for MAX98373_ALC5682I_I2S_UP4Frank Wu
Add MAX98373_ALC5682I_I2S_UP4 firmware configuration option and configure GPIOs properly for UP4 design. The design is also for Halvor. BUG=b:153680359, b:163382106 TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage, fw_config value in Halvor: > AUDIO=MAX98373_ALC5682I_I2S_UP4 ectool cbi set 6 0x00000400 4 2 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Ie25f278dfbdc2f41a36b70403699a2e3c2234600 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-21soc/intel/xeon_sp: Enable PMC supportRocky Phagura
PMC support was not enabled on Xeon_sp platforms. This involves turning on SOC_INTEL_COMMON_BLOCK_PMC and then adding the proper hooks in SOC specific code. This patch leverages code from the Skylake project and adds the bare minimum hooks to leverage PMC common code. Most importantly this enables power management registers located in the PMC device (under ACPI_BASE_ADDRESS). Access to this device is also needed for SMM setup and handling. TEST=build for Tiogapass and enable the following Kconfig options: select SOC_INTEL_COMMON_BLOCK_PMC select ACPI_INTEL_HARDWARE_SLEEP_VALUES select CPU_INTEL_COMMON_SMM Boot the system and ensure pmbase is programmed. (Look for pmbase in debug messages). Secondly check that SMIs are enabled by looking at the debug messages (search for "Enabling SMIs") and verifying in HW by reading IO port 0x530. Change-Id: I6d57a8282a8b6dc4314f156c39deb09535575cbd Signed-off-by: Rocky Phagura <rphagura@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-09-21soc/intel/xeon_sp/cpx: search IIO_UDS HOB once when creating DMAR tableJonathan Zhang
IIO_UDS HOB was searched several times during the creation of DMAR table. Reduce it to only once to improve boot time. Both DRHD and ATSR subtable creations involve addition of PCIe bridge device entries, combine the functions with acpi_create_dmar_ds_pci_br_for_port(). When looping through ports to create PCIe bridge device entries, use MAX_PORTS intead of NUMBER_PORTS_PER_SOCKET to improve boot time. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I469cd8473c50e105daeda6c5607592ae7cef6032 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-09-21soc/intel/xeon_sp/cpx: remove DMAR_X2APIC_OPT_OUT flagJonathan Zhang
CPX-SP processor supports X2APIC. Remove DMAR_X2APIC_OPT_OUT flag from DMAR table. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I63c9feda74c7abb591eac991cb98cdcad8afc158 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45375 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/ironlake: Clean up cosmetics of early ME functionsAngel Pons
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical. Change-Id: Ic766345b58c59f3d3c3570741c0eb0ad4e53ed79 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-21nb/intel/ironlake: Clean up `send_heci_uma_message` signatureAngel Pons
The only raminfo field it needs is `memory_reserved_for_heci_mb`. So, pass in that value directly. As it's read-only, make it const as well. Change-Id: Ib5d4604e6c1c9bc77df9adfead93b6028d536a3d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45365 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/ironlake: Reduce the scope of `heci_uma_addr`Angel Pons
There's no need to have it in raminfo. Also, bump MRC_CACHE_VERSION. Change-Id: Ida48ec4f50c880fe48d88d016acd3737a0650f80 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45364 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/sandybridge: Drop unnecessary `gma.h`Angel Pons
It only contains prototypes for the long-gone native graphics init. Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical. Change-Id: I9413abb8e49496ada60dcdf801a1f8a03be38d2e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45360 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/sandybridge: Put DMIBAR/EPBAR registers into separate filesAngel Pons
Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical. Change-Id: I836df4675f4886635973c0c75f5981c9ef17d84b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45359 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/sandybridge: Move register headers into a subfolderAngel Pons
Move all files with register definitions into a `registers` subfolder. Subsequent commits will move the remaining registers into this folder. Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical. Change-Id: Ie525e755f32599db97af7969fc7fbb36a5d826b6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45358 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/sandybridge: Clean up DMIBAR/EPBAR registersAngel Pons
Several registers have been copy-pasted from i945 and do not exist on Sandy Bridge. Moreover, other register definitions were missing. Use the newly-added definitions in existing code, in place of numerical offsets. Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical. Change-Id: I9ad849f57bc68256a2a87ffdc856c4b521e35892 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45357 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/sandybridge: Introduce memmap.hAngel Pons
Move all memory map definitions into a separate header. Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical. Change-Id: I7f2ff2a5cee8bf12e5dca74ff9f0b1a44e26cded Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45356 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21mb/google/volteer: fw_config: Add fields for keyboard featuresDuncan Laurie
Add newly defined fields for presence of keyboard backlight and number pad to the firmware configuration table. We don't have a need to use these in coreboot (yet) but this keeps the bit definitions in sync. BUG=b:166707536 TEST=abuild -t google/volteer Change-Id: I066e445f7d0be056e45737d2c538be1850ae85aa Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-21soc/intel/jsl: Use the common code to set the PchPmPwrCycDurV Sowmya
This patch uses the common code to avoid violating the PCH EDS recommendation for the PchPmPwrCycDur setting. Change-Id: I8aba558082ff5bbe2c5b12e0e623c013548e6481 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45030 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21soc/intel/cnl: Use the common code to set the PchPmPwrCycDurV Sowmya
This patch uses the common code to avoid violating the PCH EDS recommendation for the PchPmPwrCycDur setting. Change-Id: Id418480bc779d56ff5586516d9bd99ca15133203 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45029 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-20mb/system76/lemp9: move LPC options to the devicetreeMichael Niewöhner
Change-Id: I7b7acdc51c848541fb39926bc8de1115c026dd05 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45496 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-20mb/system76/lemp9: correct CBFS_SIZEMichael Niewöhner
The BIOS region size is 0xc00000, not 0xa00000. Correct this. Change-Id: I88cb0d4b9a590a32672054aa0db7f9a92070ff6d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-09-20mb/system76/lemp9: enable SATA ALPM capabilityMichael Niewöhner
Enable SATA Link Power Management capability to be able to save power. TEST: /sys/class/scsi_host/host*/link_power_management_policy exists. Change-Id: I88de28cfb266af3fcd6e498a08a24b46c992cb9d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45492 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-20mb/system76/lemp9: drop disabled options from devicetreeMichael Niewöhner
Drop all options with zero-value, since they already default to 0. Change-Id: I2a1a91778e83dc49c6dcf2d518cd3591f7ec4cfa Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45491 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-20mb/google/zork: update morphius dptc clamshell/tablet mode settingKevin Chiu
clamshell/tablet: Slow_ppt_limit(W) 20 Fast_ppt_limit(W) 24 Slow_ppt_time_constant 5 Stapm_time_constant 200 Sustained_power_limit(W) 12 clamshell: Temperature limit(C') 100 tablet: Temperature limit(C') 70 BUG=b:157943445 BRANCH=zork TEST=1. emerge-zork coreboot 2. change mode and check "thermctl_limit" will change Change-Id: I1eda1411766e446b673046236f7cc4015696521f Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45520 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-20soc/amd/picasso: Add THERMCTL_LIMIT DPTC parameter supportKevin Chiu
Add THERMCTL_LIMIT (die temperature limit) DPTC parameter for clamshell/tablet mode. BUG=b:157943445 BRANCH=zork TEST=build Change-Id: Id193a74210c92d1e45ed4824ee9c0fc9ceaa5e3a Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-20lint: check for misuse of Kconfig SUBSYSTEM_*_IDMichael Niewöhner
Check that nobody misuses the Kconfigs SUBSYSTEM_*_ID. They are meant to be used for overriding the devicetree subsystem ids locally but shall not be added to a board's Kconfig. Instead, the devicetree option `subsystemid` should be used. Add a linter script for this that finds and warns about such misuse. Also add a note in the Kconfigs' description. TEST=CB:45513 Change-Id: I21c021c718154f1396f795a555af47a76d6efe03 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-20soc/amd/picasso: Fix typo of Kconfig settingZheng Bao
USE_PSPSCUREOS -> USE_PSPSECUREOS. Change-Id: I5c89975cc317cb93e79509e885010d14a79dd7e1 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-19mb/system76/lemp9: move subsystem id from Kconfig to devicetreeMichael Niewöhner
Change-Id: I21e7e53787b115f50093d7caa72285ce480cef52 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-19mb/up/squared: move subsystem id from Kconfig to devicetreeMichael Niewöhner
Change-Id: Icf62a73ee568d9369c53bd767bd4cfb736ea76f1 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-19soc/intel/common/block/cse: Refactor cse_request_global_reset() functionSubrata Banik
List of changes: 1. Check if CSE is enabled from devicetree.cb 2. Create helper function cse_request_reset() 3. Modify caller function argument cse_request_global_reset() Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I3668b473bec8d51f847908d11e2e25c485ec7a97 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45341 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-19apollolake boards: Enable CSE in devicetreeSubrata Banik
Enable CSE PCI device Bus 0: Device 0x0f: Function 0x00 to let Intel common cse block code can use this device. Calling me_read_config32(offset) function from ramstage: Without this CL : HECI: Global Reset(Type:1) Command BUG: me_read_config32 requests hidden 00:0f.0 PCI: dev is NULL! With this CL : HECI: Global Reset(Type:1) Command HECI: Global Reset success! Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I97d221ae52b4b03ecd859d708847ad77fe4bf465 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-18trogdor: Move EN_PP3300_DX_EDP for CoachzJulius Werner
This patch updates the display power enable GPIO which moved from 30 to 52 for Coachz. Veterans of this project know that there's no point trying to ask *why* this change was necessary -- the pins move in mysterious ways and all we can do is watch and wonder. Pin 30 is now used for a new camera reset GPIO... surely, there must have been some excellent reason why that pin couldn't just have become pin 52 instead. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I00ad6a6249df66006b4f2b953a0a2449bd478f6d Reviewed-on: https://review.coreboot.org/c/coreboot/+/45306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-09-18mb/google/octopus/variants/fleex: support LTE power sequenceEric Lai
GPIOs related to power sequence are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:168075958 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9b56ef8ff346c1d4edd5aad04d4a7396c4702ffc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45193 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18mb/google/volteer: Remove redundant GPIO decls in EldridTim Wawrzynczak
GPP_A19 and GPP_A20 are already declared as NC in the baseboard. Change-Id: I02f5751a70b51a197320b865d18da3a4ffeb87f7 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45485 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18drivers/genesyslogic/gl9755: Add driver for Genesys Logic GL9755Ben Chuang
The device is a PCIe Gen2 to SD 4.0 card reader controller to be used in the Chromebook. The datasheet name is GL9755S and the revision is 05. The patch sets LTR value. Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Change-Id: I16048dde348be248c748d50ca4a8a62c8a781430 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-18mb/google/volteer/eldrid: Add option to enable WiFi SAR configsMalik_Hsu
This change adds a user selectable option to enable all WiFi SAR configs that apply to volteer BUG=b:168169690 TEST=1. cros-workon-volteer start coreboot-private-files-baseboard-volteer 2. USE="project_eldrid" emerge-volteer chromeos-config coreboot-private-files-baseboard-volteer 3. check wifi_sar-eldrid.hex in coreboot-private/3rdparty/blobs/baseboard-volteer Change-Id: I6b74cd2b34ebb99cc59d456e28fd7ab2399d71d0 Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45233 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18superio/nuvoton: Inline `nuvoton_hwm_select_bank`Angel Pons
There's no need to place a single-line function in its own compilation unit, and then guard it behind a Kconfig symbol. This also allows using this function in stages other than ramstage. Change-Id: I103a4ea4cef24844d382854c9358bbb37d229e04 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42130 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18src/include: Add PnP/HWM unset_and_set functionsAngel Pons
RMW (read/modify/write) ops on PnP devices has never been so simple. The semantics also allow the compiler to emit valid warnings if the input parameters would overflow, which are silenced when the cast is placed outside of the function. Change-Id: Ica01211af2a9a00aed98880844a836f6b7957b14 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42134 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17soc/intel/cannonlake: add missing special function padsMichael Niewöhner
The following parameters do nothing else than configuring the corresponding pads to native mode: - DdiPortEdp - DdiPort*Hpd - DdiPort*Ddc - GpioDdp* - SpiGpioAssign - I2c*GpioAssign - SerialIoUartDebugEnable - Gp*GpioAssign - Uart*GpioAssign - GpioEnableHdaLink - AudioLinkDmic* - AudioLinkSsp* - GpioEnableHdaSspMasterClock - AudioLinkSndw* - SmbAlertEnable Add the missing special function gpio pad groups for CNL, to be able to configure them via gpio.h instead having to set various FSP parameters. The groups and names are documented in the PCH EDS, in Linux (linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places. Also, see soc/intel/tigerlake for reference. Change-Id: Ia3bc1df1a14dbca7c7213577cb2d5b98bb0acf64 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-09-17mb/system76/lemp9: update power limitsJeremy Soller
Tested on lemp9, power limits are adjusted from the previously low values to the values the thermal system can handle. This was determined by increasing the values and running the system at 100% CPU utilization until thermal throttling occured and the chassis temperature became uncomfortable. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I5e176e9d98376f8e2dc415e4397efc456869e72d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43624 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17mb/system76/lemp9: disable PCH DMIC, which is not wiredMichael Niewöhner
The microphone is wired to the audio codec, not to the PCH. Disable the DMIC interface. Change-Id: I4128a694c1a66d3c2c2d1cb831fcca3487160f8f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45133 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17soc/intel/cannonlake: rename "RSVD" GPIOs to their correct namesMichael Niewöhner
The names of the GPIO_RSVD_* are documented in the PCH EDS, in Linux (linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places. Also, see soc/intel/tigerlake for reference. Change-Id: I59df09c8fd464e75f918455aa1972765abc51459 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-09-17mb/system76/lemp9: skip FSP init of UART2Jeremy Soller
This UART is already initialized by coreboot for the console, it does not need to be initialized by the FSP. Tested on lemp9. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I7c299fd7cf6fe53d1f500a899a14e63e51ad6266 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-17nb/intel/haswell: Put DMIBAR/EPBAR registers into separate filesAngel Pons
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: Ib68d8b88b0d79cb33d42f9e21cfb0e57abae75e8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45355 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/haswell: Move register headers into a subfolderAngel Pons
Move all files with register definitions into a `registers` subfolder. Subsequent commits will move the remaining registers into this folder. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I143b3c829be44a39e14902255cd4bb13bf02f0c1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45354 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/x4x: Clean up TPM-related codeAngel Pons
Perform the read to the TPM base address using <arch/mmio.h> functions. Remove dead variable assignment and rename TPM base address macro. Tested with BUILD_TIMELESS=1. Asus P5QL PRO remains identical. Change-Id: I11d737903c57fce768b760fe717564dae8879ad0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-09-17nb/intel/pineview: Guard DMIBAR/EPBAR macro parametersAngel Pons
Add brackets around the parameters to avoid operation order problems. Tested with BUILD_TIMELESS=1, Foxconn D41S remains identical. Change-Id: I347466f56d3d5fb3793b3a25e4a825c844e50d42 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/pineview/iomap.h: Rename to memmap.hAngel Pons
It primarily contains definitions for MMIO windows. Change-Id: I8cd639c8c7d400a5bfd73735113dd27dd6f948e6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/ironlake: Do not re-read ME UMA sizeAngel Pons
It has been read twice already, so don't read it a third time. Change-Id: I56ec3a10246f6ebe8074e7b8c164bda6b90eee87 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/ironlake: Drop some unused function parametersAngel Pons
Some of the HECI functions do not need raminfo at all. Change-Id: If0720fa87e5e18820db77a1b61bcdb42ecc538fb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/ironlake: Drop `heci_bar` field from raminitAngel Pons
This field is only written to, never read. Drop it from raminfo. Also, bump MRC_CACHE_VERSION as the saved data layout has changed. Change-Id: I83d6e69addff996e2f18472d3e1d4f7b9ba974fd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/haswell: Clean up register definitionsAngel Pons
Several registers have been copy-pasted from i945 and do not exist on Haswell. Moreover, other register definitions were missing. Although most of them are unused, native platform init may eventually use them. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I6b3a47b2af406da6b030d417f14a2f4d394aa9c8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45353 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/haswell: Guard DMIBAR/EPBAR macro parametersAngel Pons
Add brackets around the parameters to avoid operation order problems. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I5e1a02ba2ebf468f0d80b7f1838766280b6b7b22 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45352 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-16 16:18:18 +0000