summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2018-06-11{src,util}: Use NULL instead of 0 for pointerElyes HAOUAS
Change-Id: I75fa4577055f25dde0a8b1044c005bba72cabd92 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-11google/fizz: fix LAN driver chip_info attachmentMatt DeVillier
As a result of commit: [711fb81] soc/intel/skylake: Swap PCI devfn resides in same PCI device fizz's chip_info for the LAN driver is being overwritten/nulled, as the LAN device is on function 2 (PCIe port 3), but the driver info was set for the post-swapped PCIe port (1). Move the driver chip_info to function 2/port 3, so that it follows the PCI device function when swapped after FSP-s, and is correctly passed to the LAN driver. Test: boot google/fizz (teemo variant), check cbmem console and verify ethernet MAC address and LED config correctly set. Change-Id: I08810c0c89d99af5799f42c7c4e51814f09aafec Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-11sb/intel/common: Include SPI driver into postcar stageNico Huber
Change-Id: I2ea07cdeb8fc70dbf516831f4da5949fef136b37 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26873 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-11drivers/spi: Remove Kconfig prompt from SPI_FLASH_SMMNico Huber
Why would that be a user visible option? Drop the prompt and the `default n` and select it automatically when needed. I hope I caught all its users. TEST=Confirmed that systems with ELOG_GSMI or DEBUG_SMI compile and link. Change-Id: I44aeec530cc333f4ed4c8cfe67c7b5c9d8fb0049 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-11drivers/spi: Treat all stages commonly when adding driversNico Huber
Clean it up and add all flash chip drivers to postcar stage thereby. There seem to be SPI controllers that don't need the individual flash chip drivers. For those postcar support was added in b6b1b23 (console/flashconsole: Enable support for postcar). However for SPI controllers that need the individual drivers (i.e. those with CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y), linking of the postcar stage was broken. For all other stages, the set of compilation units stays the same. Change-Id: Ib8bdb824bfcf2d31ac696e39f797c4355b765756 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26871 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-11drivers/spi: Remove DEBUG_SMI guardNico Huber
Let the linker take care of it. Change-Id: I67d2636ceb042f833c1b44888b98135d728940e0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-11mainboard/google/kahlee: Remove unused baseboard codeMartin Roth
This code is no longer needed. BUG=b:107537694 TEST=Build & boot on grunt Change-Id: I71ad01f0d4c69a618d564e514ed99550b72a6b44 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-11mainboard/google/kahlee: Remove Kahlee variantMartin Roth
This code is no longer needed. Removing Kahlee options allows some Kconfig options to be optimized. BUG=b:77693343 TEST=Build Grunt, verify that nothing's changed. Change-Id: I4eeeee7f35381bba8760c8a530251c475d0ee29b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-11mainboard/google/eve: add vendor to subsystem idMatt Delco
The initial subsystem ID had a device ID but not a vendor ID. This change adds the Google vendor ID to the subsystem ID. Change-Id: I14897da115fd6f2ddd492b6c565bd23227197232 Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/26987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: HARSHAPRIYA N <harshapriya.n@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-11selfboot: Move x86 quirk under archKyösti Mälkki
Making exceptions for some payload to be loaded near and under 1 MiB boundary sounds like a legacy 16-bit x86 BIOS thing we generally do not want under lib/. Change-Id: I8e8336a03d6f06d8f022c880a8334fe19a777f0a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-11mb/google/poppy/variants/nami: Add EC_ENABLE_TBMC_DEVICEShelley Chen
Add tablet motion control config to nami devices. BUG=None BRANCH=None TEST=run evtest make sure tablet switch value is 1 in tablet mode and 0 when not in tablet mode Change-Id: Ie1480934dc003d9b467883e001ed89f9a3694d10 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/26970 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-11mb/google/poppy/variants/nocturne: enable nvmeNick Vaccaro
- configure GPP_B7 (PCIE_NVME_CLKREQ_ODL) for NF1 - enable root port 9 - add nvme register settings to devicetree BUG=b:78122599 BRANCH=chromeos-2016.05 TEST='emerge-nocturne depthcharge coreboot chromeos-bootimage', boot to kernel, and verify /dev/nvme* entries exist. CQ-DEPEND=CL:1090070 Change-Id: I0070d33b1ed09bd1f51a680d92ddb7e2bcb1ebc2 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-06-11Fizz: Remove BJ adapter configurationDaisuke Nojiri
This patch removes BJ adapter configuration, which has been moved to the EC. BUG=b:109762580 CQ-DEPEND=CL:1089328 BRANCH=none TEST=Verify BJ adapter is set expectedly on Teemo. Change-Id: I3041b984e7f02624b94ba2713b084d001fa155f9 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/1089370 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/26965 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-09mainboard: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Use pci_devfn_t or pnp_devfn_t instead of device_t in romstage. Change-Id: Ie0ae3972eacc97ae154dad4fafd171aa1f38683a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26984 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-09mainboard: Get rid of device_t in ramstageElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I07e00afbbd2c19cf3ea6e08f228eb39e45f1ad0c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-09sb/intel/lynxpoint: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I064ff5e76dd95c1770cd24139195b2a5fff2d382 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-09sb/intel/fsp_bd82x6x: Use pci_devfn_t instead of device_tElyes HAOUAS
Change-Id: I775f5482970905134bb395b03845eb798d88d209 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-08soc/intel/skylake: Enable low power S0Idle capabilityHaridhar Kalvala
This patch sets the ACPI FADT flag ACPI_FADT_LOW_POWER_S0 if S0ix is enabled for the platform. BUG=b:79559085 TEST= Boot to OS and check the ACPI_FADT_LOW_PWR_IDLE_S0 flag is set in FACP table - FADT.Flags[21] bit. Change-Id: I0b8a86118232a66e7466d5b8116eff6087b51210 Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Reviewed-on: https://review.coreboot.org/26940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-06-08mainboard/google/kahlee: Turn on backlight for all SKUsMartin Roth
Careena uses a different keyboard backlight method, so let the EC handle the different SKUs and backlight methods. BUG=b:80106042 TEST=None Change-Id: I47f7a9ac13538f0216fbb0f64fdd22f66097820c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-06-08src/mainboard/kahlee: Use common mainboard and romstage filesMartin Roth
Until these need to be separated out, use a common file for mainboard and romstage to make upkeep easier. BUG=b:80106042 TEST=Build Grunt and Careena Change-Id: I65188bee1958d442bfe64637c3b93dc05583a686 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-06-08southbridge/intel/lynxpoint: add hard_reset to postcarPatrick Georgi
This fixes the following failure on certain google/peppy configs: build/postcar/lib/reset.o: In function `__hard_reset': /home/pgeorgi/coreboot/src/lib/reset.c:24: undefined reference to `do_hard_reset' Change-Id: I448a8702a30108f1fc82179a766cbdd209336df7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/26986 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-08mainboard/google/kahlee: Use 66MHz SPI clock for fast readMartin Roth
Looking at the 100MHz signal, we were violating the timing requirements. 66MHz still isn't great, but it's a good tradeoff between improving the signal and losing boot speed time. This slows down the boot time by about 20mS. BUG=b:109583457 TEST=Boot grunt, look at signal on scope Change-Id: I7ce70c992822dd17c5877226e74c1890660768c6 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-06-08arch/x86: Drop leftover ROMCC console supportKyösti Mälkki
Change-Id: I3e52569a34e1f7bfea8be9da91348c364ab705e1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-08libgfxinit: Enable G45 support (for GM45/X4X)Nico Huber
Change-Id: Ia637d32ffaa5d280320955d34141eddc8b7df981 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/22222 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-08mb/google/kahlee: Configure EC_PCH_WAKE_L as an SCI sourceDaniel Kurtz
Configuring EC_PCH_WAKE_L as an SCI enabled GPIO allows the EC to wake the AP from S3 on keyboard presses. BUG=b:109759838 TEST=(1) powerd_dbus_suspend (2) press a key on the internal keyboard => system resumes from S3 Change-Id: I30f72460fd588706f91f4fc3ea4ff007c96e9ebe Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26931 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-08amd/stoneyridge: Set SCI_MAP for SCI enabled GPIOsDaniel Kurtz
By default we use a 1:1 mapping between GEVENT bits and the corresponding SCI_MAP entry. However, we still must program the SCI_MAP entries with the GEVENT number. BUG=b:109759838 TEST=(1) powerd_dbus_suspend (2) move finger on touchpad for ~1 second => system resumes from S3 Change-Id: Ie7be45264f9bfec56efc47a03071fdb924d16b6a Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/26930 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07mb/google/octopus: Fix GPIO to GPE mappings in devicetreeFurquan Shaikh
Change b41ae2 (mb/google/octopus: Enable wake-over-wifi for octopus variants) changed the GPE mappings to accomodate for WiFi wake pin. However, this resulted in TPM interrupt pin being removed from the GPIO to GPE mapping. Since we do not support true interrupts in coreboot, GPE_STS registers are used to identify if an interrupt has triggered. Change in GPE mapping resulted in this information to be lost when talking to TPM thus resulting in "Timeout wait for tpm irq". This change fixes the above issue by assigning GPIO block for TPM interrupt back to DW1 and moving GPIO block for wake-over-wifi pin to DW3. DW3 was mapped to NW_31_0 which only has debug header pins and CNVI pins (none of them are used for reading GPE_STS or as wake sources). BUG=b:109824918 TEST=Verified that there are no "Timeout wait for tpm irq" messages when talking to TPM. Change-Id: I30768177a838a684948f7485d760c8b83c3190f7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Hannah Williams <hannah.williams@intel.com>
2018-06-07soc/intel/common/pch: Add pch lockdown codeSubrata Banik
pch lockdown functionality can be used by supported PCH. Right now pch lockdown functionality is applied for SPT (Skylake SOC) and CNP(Cannon Lake SOC) PCH. BUG=b:78109109 BRANCH=none TEST=Build and boot KBL and CNL platform. Change-Id: I0b81bbc54f737cb4e7120f44bbe705039b45ccb3 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/25688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-07mb/google/poppy: Select right TPM interfaceNaresh G Solanki
TPM over SPI/I2C config selection got changed in https://review.coreboot.org/c/coreboot/+/24903 so this CL is fixing the same. BUG=None BRANCH=None TEST=Build for Soraka & make sure that TPM is probed over I2C interface rather than SPI. Change-Id: I077e4dc03520e26eb9f6404a7eb1edd99925de77 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/26890 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07mb/google/poppy/variants/nami: Disable rear camera/DMIC for SonaAmanda Huang
Since there are two cameras on Nami and only one camera on Sona. We need to disable rear camera/DMIC on all Sona sku. BUG=b:109710674 BRANCH=master TEST=Verify if only front camera/DMIC shown on Sona Change-Id: Id84ee22c9ffc15db78be3bbad148af5cd7dc866e Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-07mb/google/poppy/variants/nami: Disable rear camera/DMIC for PantheonAmanda Huang
Since there are two cameras on Nami and only one camera on Pantheon. We need to disable rear camera/DMIC on all Pantheon sku. BUG=b:109720689 BRANCH=master TEST=Verify if only front camera/DMIC shown on Pantheon Change-Id: Ibe48a945dc57f2c05344479253040ad1945d92fd Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-07console/hw-debug_sink: Do not cache state of log levelNico Huber
As we suppress output now before console_init() is done, the log level read at start of ramstage is always -1. Change-Id: Ia078d647c47aaa41ca9f2df9cf8506148ef86538 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/26832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-07mediatek: Move uart, timer and cbmem code to a common directory.Tristan Shieh
This patch moves uart, timer and cbmem code which can be reused into a common directory under soc/mediatek. BUG=b:80501386 BRANCH=none TEST=the refactored code works fine on the new platform (with the rest of the patches applied) and Elm platform Change-Id: I5210149b324947ee90f1a481b42f0e2e1f7cfc25 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/26658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-06-07mediatek: Refactor to sharing code among similar SOCsTristan Shieh
This patch refactor cbmem and timer code which will be reused among similar SOCs. BUG=b:80501386 BRANCH=none TEST=the refactored code works fine on the new platform (with the rest of the patches applied) and Elm platform Change-Id: I397ebdc0c97c7616bd547022d2ce2a8f08f3c232 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/26881 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07mediatek: Refine whitespace and formating changesTristan Shieh
This patch fix whitespace and formating issues: 1. Using two spaces between code and single line comment. 2. No space after asterisk. 3. Fix checkpatch error. 4. Remove spaces after cast operators. BUG=b:80501386 BRANCH=none TEST=the refactored code works fine on the new platform (with the rest of the patches applied) and Elm platform Change-Id: Ib36c99b141c94220776fab606eb36af8f64f65bb Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/26880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-07nb/intel/pineview: Enable and allocate 8M for TSEGArthur Heymans
TSEG can be used as a stage cache and SMM can be relocated here. Change-Id: Ifa3acce57f0c13eee326b7c203a43453c74c3161 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/25593 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07nb/intel/i945: Enable and allocate 8M for TSEGArthur Heymans
TSEG can be used as a stage cache and SMM can be relocated here. Tested on Intel D945GCLF, still boots. Change-Id: I0da5a00c98c4c4fb309b2691dc1d4645eb35b4fd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/25592 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07nb/intel/i945: Add a common function to compute TSEG sizeArthur Heymans
This adds a common function to decode the TSEG size from the ESMRAM register. This will come in handy when SMM in TSEG is implemented. This function is used both in romstage and in ramstage. Change-Id: I4e163598752fb6cd036aec229fce439ebad74def Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23448 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07arch/x86/smbios: Conditionally call SMBIOS opsNaresh G Solanki
Check whether device is enabled before calling smbios ops. BUG=None BRANCH=None TEST=Build & boot Soraka. Change-Id: I79681c10679e1de3a2d177503f29239968d0c157 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/26864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-07google/chromeec: Set proper dev opsNaresh G Solanki
For enable_resource & set_resource, use default DEVICE_NOOP so that they are not reported as missing during enumeration. BUG=None BRANCH=None TEST= Build & boot soraka. Change-Id: I0fcfb8df39c6313c8a5bab5b780a8ffa7531d210 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/26869 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-07mainboard/google/kahlee: Remove colon from filenamesMartin Roth
Change-Id: I3e0ca62ad88aea5c99f9f0902ad8553656469a1c Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/26936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-06mb/google/octopus: Update GPIOs as per latest schematicsFurquan Shaikh
Update GPIOs in baseboard to match latest schematics: 1. Get rid of STEST GPIOs(GPIO_{62,84-89}) 2. Get rid of SD_CD_ODL(GPIO_134) 3. Get rid of KB control GPIOs(GPIO_{144-146}) 4. Configure GPIOs for pen eject (GPIO_{144,145}). Additionally, fix the configuration for other pen GPIOs. BUG=b:109764138 Change-Id: I8e40dd90b2784596f055538e57ea67482c4c517a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26874 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-06mb/*/*: Add a few VBT filesArthur Heymans
These files are directly extracted from the vendor firmware. Change-Id: I1dea2843255e4a3e93fbb734dea284be029dbc45 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-06drivers/intel/gma: Include mainboard data.vbtArthur Heymans
This adds a INTEL_GMA_VBT_HAVE_DATA_FILE Kconfig option for the path to point to the mainboard dir and to select INTEL_GMA_ADD_VBT_DATA_FILE by default. Change-Id: I730cb0737945631e2d5379a9e26b8c039ec6dc49 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-06arch/x86: Always select RELOCATABLE_MODULESKyösti Mälkki
All boards except those with NO_RELOCATABLE_RAMSTAGE or explicit select already had this feature built. Change-Id: I838e12141243ec49c2555c09269e07476eb0cfad Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-06intel/e7505: Remove ROMCC workaroundKyösti Mälkki
Choose codepath as if ROMCC_IF_BUG_FIXED was set. Change-Id: I74b4fe4a915b70f63ea018035381b64f53af3c7f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-06arch/x86: Make RELOCATABLE_RAMSTAGE the defaultKyösti Mälkki
No need to provide an option to try disable this. Also remove explicit ´select RELOCATABLE_MODULES' lines from platform Kconfigs. Change-Id: I5fb169f90331ce37b4113378405323ec856d6fee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-06mb/lenovo: Add ThinkPad W530 supportEvgeny Zinoviev
Tested and working: - Wi-Fi - Ethernet - WWAN ? (interface is created in linux, didn't actually test it, should work) - Bluetooth - Speakers - Internal mic - SD card reader - Suspend and resume - Keyboard, touchpad, trackpoint - Fan - Webcam - 4 RAM slots - All USB ports - mSATA - VGA ROM (FIXME: black screen after resume from s3) - Native graphics initialization (FIXME: probably incorrect panel frequency, etc. in GRUB; in linux everything's fine incl. resume from s3) - libgfxinit - GRUB payload - SeaBIOS payload - Internal flashing using flashrom Not tested yet: - Fingerprint reader - Colorimeter - Smart card reader - Docking station - VGA output - Optical disc drive - Discrete graphics TODO: - Test BDC detection Change-Id: Ic7918ea18712221cc62c5564caede340f71ce400 Signed-off-by: Evgeny Zinoviev <me@ch1p.com> Reviewed-on: https://review.coreboot.org/26136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-06-06arch/x86: Flag platforms without RELOCATABLE_RAMSTAGEKyösti Mälkki
To flip the Kconfig default, flag some platforms with NO_RELOCATABLE_RAMSTAGE. Change-Id: I72c6d07e5a60789bbe0e068a0130d7e3bd07a1d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-06arch/x86: Use fixed size limit with RELOCATABLE_RAMSTAGEKyösti Mälkki
With RELOCATABLE_RAMSTAGE, variables RAMBASE and RAMTOP have no meaning any more. Change-Id: I711fe98a399177c2d3cb2a9dcdefba61031fb76d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26812 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-01 20:25:39 +0000