summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2013-06-06AGESA: Add "const" modifier to function parametersBruce Griffith
Add CONST modifiers to read-only pass-by-reference function parameters in AGESA. This allows the use of "const" modifiers on the declaration of lookup tables that are pass-by-reference. These will be used to identify tables that are copied onto the HEAP but don't need to be. Change-Id: Ie1187a427804fddf47b935a110ad23931a3447a9 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3393 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-06qemu: wind up new cpu chipGerd Hoffmann
Add boot cpu to the device tree. Figure the number of CPUs installed (using the qemu firmware config interface) and add cpu devices for them, so they show up in all generated BIOS tables correctly. This gets SMP going. Change-Id: I0e99f98942d8ca90150b27fc13c1c7e926a1a644 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3345 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-06qemu: add x86 cpuGerd Hoffmann
This patch adds a qemu x86 cpu chip. It has no initialization function as this isn't needed on virtual hardware. A virtual machine can have pretty much any CPU: qemu emulates a wide range of x86 CPUs (try 'qemu -cpu ? for a list), also with 'qemu -cpu host' the guest will see a cpu which is (almost) identical to the one on the host machine. So I've added X86_VENDOR_ANY as wildcard match for the cpu_table. Change-Id: Ib01210694b09702e41ed806f31d0033e840a863f Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3344 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-06ec/kontron/it8516e: Add it8516e EC driverNico Huber
This driver communicates with the IT8516e on the Kontron KTQM77. Since we don't know if the firmware and protocol are standard for the chip or customized to the board, call it kontron/it8516e. Change-Id: I7382172c6d865d60106c929124444821a07a5184 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3390 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-06intel/bd82x6x: Add option to include ethernet firmwareNico Huber
Change-Id: Idf804ed29a67bad732df19e6981f74c8d0c354b5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3388 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-06intel/bd82x6x: fix building usb debug on SNB/IVBPatrick Georgi
Change-Id: Ica3afbf8277cb025251da7af181f8de0d0036b45 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3389 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-06(Trivial) early_smbus: fix printsmbus macroAlexandru Gagniuc
When I've first written this macro in 2011, the correct define for verbose SMBus message was CONFIG_DEBUG_SMBUS_SETUP. This has since been changed to CONFIG_DEBUG_SMBUS. I didn't catch that, and this made the printsmbus macro always evaluate to an empty statement. Use the proper CONFIG_DEBUG_SMBUS define. This makes printsmbus functional again. Change-Id: Iaf03354b179cc4a061e0b65f5b746af10f5d2b88 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3379 Tested-by: build bot (Jenkins) Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2013-06-05qemu: add power management function to device treeGerd Hoffmann
Needed to make 'register "gpo" = ...' work. While being at it add comments saying which device is which. Change-Id: I911d5e4a7b6c7abf4ad73e863ab201e9e55ee0d4 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3346 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-05console: log qemu debugcon detection resultGerd Hoffmann
Change-Id: Ie0507475f33d029d6e8ce59f138e0e7da5156d4f Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3339 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-05console: add qemu debugcon detectionGerd Hoffmann
The qemu debugcon port returns 0xe9 on reads in case the device is present. Use that for detection and write console output to the port only in case the device is actually present. Change-Id: I41aabcf11845d24004e4f795dfd799822fd14646 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3338 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-05console: add qemu prefix to debugconGerd Hoffmann
Change-Id: Ibcc0a94638c022a76cd3c2e3387af6e1ab757ccb Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3337 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-05qemu: Initial support for the qemu firmware config interface.Gerd Hoffmann
qemu has a special device to pass configuration information from qemu to the firmware. This patch adds initial support the interface, namely some infrastructure, detection code and a function to query the number of CPUs. Change-Id: I43ff5f4fbf12334a91422aa38f514a82a1d5219e Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3343 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-05Revert "Asus F2A85-M: Activate IOMMU support"Paul Menzel
This reverts commit eed28f97b375a9469a2872996c19eb102647052e. For whatever reason, the dependencies were lost in Gerrit and the commit [1] was submitted without its dependencies. As a result buidling the ASUS F2A85-M fails now [2] and therefore commits based on this commit fail to pass the buid tests by Jenkins. […] Created CBFS image (capacity = 8387656 bytes) LINK cbfs/fallback/romstage_null.debug CC cbfs/fallback/coreboot_ram.debug coreboot-builds/asus_f2a85-m/generated/coreboot_ram.o:(.data+0x16b9c): undefined reference to `GnbIommuScratchMemoryRangeInterface' collect2: error: ld returned 1 exit status make: *** [coreboot-builds/asus_f2a85-m/cbfs/fallback/coreboot_ram.debug] Error 1 make: *** Waiting for unfinished jobs.... coreboot-builds/asus_f2a85-m/mainboard/asus/f2a85-m/buildOpts.romstage.o:(.data+0x3d8): undefined reference to `GnbIommuScratchMemoryRangeInterface' collect2: error: ld returned 1 exit status make: *** [coreboot-builds/asus_f2a85-m/cbfs/fallback/romstage_null.debug] Error 1 […] Therefore revert the commit to get the tree working again and submit this patch with its dependencies again. [1] http://review.coreboot.org/#/c/3317/ [2] http://qa.coreboot.org/job/coreboot-gerrit/6618/testReport/junit/(root)/board/i386_asus_f2a85_m/ Change-Id: I911755884da09eb0a0651b8db07ee2a32e6eaaaa Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3373 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-05qemu: fix IRQ routing setupGerd Hoffmann
Do the setup for all PCI slots, not only the third. Also remove the bogus message, as slot 3 may carry any device, not only NICs. This makes IRQ setup simliar to SeaBIOS. SeaBIOS assignments (with patch for logging added, and a bunch of pci devices for testing purposes): PCI IRQ [piix]: bdf=00:01.3 pin=1 line=10 PCI IRQ [piix]: bdf=00:03.0 pin=1 line=11 PCI IRQ [piix]: bdf=00:04.0 pin=1 line=11 PCI IRQ [piix]: bdf=00:05.0 pin=1 line=10 PCI IRQ [piix]: bdf=00:06.0 pin=1 line=10 PCI IRQ [piix]: bdf=00:1d.0 pin=1 line=10 PCI IRQ [piix]: bdf=00:1d.1 pin=2 line=10 PCI IRQ [piix]: bdf=00:1d.2 pin=3 line=11 PCI IRQ [piix]: bdf=00:1d.7 pin=4 line=11 Coreboot assignments without this patch: Assigning IRQ 11 to 0:3.0 Coreboot assignments with this patch: Assigning IRQ 10 to 0:1.3 Assigning IRQ 11 to 0:3.0 Assigning IRQ 11 to 0:4.0 Assigning IRQ 10 to 0:5.0 Assigning IRQ 10 to 0:6.0 Assigning IRQ 10 to 0:1d.0 Assigning IRQ 10 to 0:1d.1 Assigning IRQ 11 to 0:1d.2 Assigning IRQ 11 to 0:1d.7 Change-Id: Ie96be39185f2f1cbde3c9fc50e29faff59c28493 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3334 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-05Intel 945: Select LAPIC_MONOTONIC_TIMER for X86EMU_DEBUG_TIMINGSDenis 'GNUtoo' Carikli
X86EMU_DEBUG_TIMING is needed for producing i915tool compatible output. So add its dependencies to the i945’s Kconfig in order to be able to use X86EMU_DEBUG_TIMINGS, which depends on HAVE_MONOTONIC_TIMER which LAPIC_MONOTONIC_TIMER provides/selects. Note that UDELAY_LAPIC is already selected by the Intel CPU. Change-Id: Ie834ebc92e527eb186a92b39341ebd0a08889fb0 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3356 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04Asus F2A85-M: Activate IOMMU supportRudolf Marek
Activate the IOMMU support for the Asus F2A85-M. Add the device to `devicetree.cb`. $ pci -s 0.2 […] 00:00.2 IOMMU: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) I/O Memory Management Unit $ dmesg […] [ 0.000000] ACPI: IVRS 00000000bf144e10 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000) [ 0.000000] ACPI: SSDT 00000000bf144e80 0051F (v02 AMD ALIB 00000001 MSFT 04000000) [ 0.000000] ACPI: SSDT 00000000bf1453a0 006B2 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 00000000bf145a52 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A) […] [ 0.465114] [Firmware Bug]: ACPI: no secondary bus range in _CRS […] [ 0.567330] pci 0000:00:00.0: >[1022:1410] type 00 class 0x060000 [ 0.567364] pci 0000:00:00.2: >[1022:1419] type 00 class 0x080600 [ 0.567427] pci 0000:00:01.0: >[1002:9993] type 00 class 0x03000 […] [ 0.597731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.597899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PIBR._PRT] [ 0.597933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBR0._PRT] [ 0.597972] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBR1._PRT] [ 0.598073] pci0000:00: >Requesting ACPI _OSC control (0x1d) [ 0.603808] pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.612397] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.620508] Freeing initrd memory: 14876k freed […] [ 0.882674] pci 0000:00:01.0: >Boot video device [ 0.882876] PCI: CLS 64 bytes, default 64 [ 0.897088] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40 extended features: PreF PPR GT IA [ 0.905816] pci 0000:00:00.2: >irq 40 for MSI/MSI-X [ 0.917457] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.922076] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.928500] software IO TLB [mem 0xbb13d000-0xbf13cfff] (64MB) mapped at [ffff8800bb13d000-ffff8800bf13cfff] [ 0.938535] LVT offset 0 assigned for vector 0x400 [ 0.943338] perf: AMD IBS detected (0x000000ff) [ 0.948037] audit: initializing netlink socket (disabled) [ 0.953432] type=2000 audit(1369659616.800:1): initialized [ 0.977011] HugeTLB registered 2 MB page size, pre-allocated 0 pages […] [ 7.881938] radeon 0000:00:01.0: >VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 7.881941] radeon 0000:00:01.0: >GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF […] [ 7.885516] radeon 0000:00:01.0: >irq 48 for MSI/MSI-X [ 7.885525] radeon 0000:00:01.0: >radeon: using MSI. […] [ 8.276775] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae000 flags=0x0010] [ 8.287363] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acc00 flags=0x0010] [ 8.297945] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae200 flags=0x0010] [ 8.308527] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae080 flags=0x0010] [ 8.319109] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae240 flags=0x0010] [ 8.329694] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001accc0 flags=0x0010] [ 8.340276] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ace80 flags=0x0010] [ 8.350858] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acd80 flags=0x0010] [ 8.361441] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae280 flags=0x0010] [ 8.372022] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae180 flags=0x0010] [ 8.382605] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ace00 flags=0x0010] [ 8.393188] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acdc0 flags=0x0010] [ 8.403770] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ace40 flags=0x0010] [ 8.414353] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae1c0 flags=0x0010] [ 8.424936] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acc40 flags=0x0010] [ 8.435518] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acc80 flags=0x0010] [ 8.446100] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae2c0 flags=0x0010] [ 8.456684] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae300 flags=0x0010] [ 8.467265] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae340 flags=0x0010] [ 8.477849] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae380 flags=0x0010] [ 8.488431] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae3c0 flags=0x0010] [ 8.499013] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae0c0 flags=0x0010] [ 8.509596] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acec0 flags=0x0010] [ 8.520179] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acd00 flags=0x0010] [ 8.530761] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad000 flags=0x0010] [ 8.541343] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae400 flags=0x0010] [ 8.551925] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae440 flags=0x0010] [ 8.562509] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acf00 flags=0x0010] [ 8.573090] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae480 flags=0x0010] [ 8.583675] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae100 flags=0x0010] [ 8.594257] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae4c0 flags=0x0010] […] [ 8.604840] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acf40 flags=0x0010] [ 8.615421] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acd40 flags=0x0010] [ 8.626004] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad140 flags=0x0010] [ 8.636587] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad040 flags=0x0010] [ 8.647169] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad080 flags=0x0010] [ 8.657751] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae500 flags=0x0010] [ 8.668335] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad100 flags=0x0010] [ 8.678917] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad0c0 flags=0x0010] [ 8.689499] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acf80 flags=0x0010] [ 8.700080] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acfc0 flags=0x0010] [ 8.710664] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae140 flags=0x0010] [ 8.721246] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae040 flags=0x0010] [ 8.731828] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad180 flags=0x0010] [ 8.742412] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae540 flags=0x0010] [ 8.752995] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad280 flags=0x0010] [ 8.763577] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad340 flags=0x0010] [ 8.774160] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad200 flags=0x0010] [ 8.784741] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad300 flags=0x0010] [ 8.795324] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae5c0 flags=0x0010] [ 8.805906] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae640 flags=0x0010] [ 8.816490] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad2c0 flags=0x0010] [ 8.827072] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad1c0 flags=0x0010] [ 8.837655] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad240 flags=0x0010] [ 8.848238] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae580 flags=0x0010] [ 8.858819] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae600 flags=0x0010] [ 8.869402] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad3c0 flags=0x0010] [ 8.879985] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad380 flags=0x0010] [ 8.890568] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae7c0 flags=0x0010] [ 8.901151] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae740 flags=0x0010] [ 8.911732] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae6c0 flags=0x0010] [ 8.922316] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae780 flags=0x0010] [ 8.932897] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae700 flags=0x0010] [ 8.943480] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae680 flags=0x0010] [ 8.963011] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 8.963165] radeon 0000:00:01.0: >WB enabled […] It is not known, what the implications of the `IO_PAGE_FAULT` are. Change-Id: Ic5fde609322a5fdeb1a48052c403847197752a4b Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/3317 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04Yabel : Add tracing option needed by i915tool.Denis 'GNUtoo' Carikli
This patch was made by listenning to what Ron Minnich told me to do on #coreboot IRC channel on Freenode with my adaptations on top. i915tool is at https://code.google.com/p/i915tool/ , the one in coreboot is outdated. Change-Id: I13cd684f4c290114836fbd7babd461153e8d6124 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3277 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04Move the MARK_GRAPHICS_MEM_WRCOMB to x86 architectureRonald G. Minnich
The MARK_GRAPHICS_MEM_WRCOMB was spreading like a cancer since it was defined in sandybridge. It is really more of an x86 thing however, and we now have three systems that can use it. I considered making this more general, since it technically can apply to PTE-based systems like ARM, and maybe we should. But the 'WRCOMB' moniker is usually closely tied to the x86. Change-Id: I3eb6eb2113843643348a5e18e78c53d113899ff8 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3349 Tested-by: build bot (Jenkins)
2013-06-04Lenovo X60: Add CMOS defaults.Denis 'GNUtoo' Carikli
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback baud_rate = 115200 debug_level = Spew hyper_threading = Enable nmi = Enable boot_devices = '' boot_default = 0x40 cmos_defaults_loaded = Yes lpt = Enable volume = 0xff tft_brightness = 0xbf first_battery = Primary bluetooth = Enable The code for handling the invalid CMOS space in mainboard.c is now useless and so it was removed. Change-Id: Ic57a14eeeea861aa034cb0884795b0152757bf5b Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3335 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-04Asus M4A785T-M: Add CMOS defaults.Denis 'GNUtoo' Carikli
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Enable baud_rate = 115200 hw_scrubber = Enable interleave_chip_selects = Enable max_mem_clock = 400Mhz multi_core = Enable power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0xc slow_cpu = off nmi = Enable iommu = Enable nvramtool: Can not read coreboot parameter user_data because layout info specifies CMOS area that is too wide. nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Idea03b9bc75c5c34c7ce521ce5e5a1c1bb6dfa96 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3324 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-04PC Engines ALIX.1C: Add CMOS defaults.Denis 'GNUtoo' Carikli
After Booting the BIOS, flashing coreboot and booting coreboot with that patch we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Disable baud_rate = 115200 power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0x7f nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Ia87b09003d859f6dee7c09aa963df002c1d02688 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3323 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-04pci_ids.h: Add PCI IDs for VIA VX900 chipsetAlexandru Gagniuc
Change-Id: I4a75326fef0a10a6290cdd4b1b93d9af8e3ab23d Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3268 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-06-04coreboot: Add generic early SMBus APIAlexandru Gagniuc
Early SMBUS code with similar functionality is duplicated for all southbridges. Add a generic SMBus API (function declarations) designed to unify the early SMBus structure. This patch only adds the API. It does not implement any hardware-specific bits. Change-Id: I0861b7a3f098115182ae6de9f016dd671c500bad Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/143 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04DDR3: Add utilities for creating MRS commandsAlexandru Gagniuc
MRS commands are used to tell the DRAM chip what timing and what termination and drive strength to use, along with other parameters. The MRS commands are defined by the DDR3 specification [1]. This makes MRS commands hardware-independent. MRS command creation is duplicated in various shapes and forms in any chipset that does DDR3. This is an effort to create a generic MRS API that can be used with any chipset. This is used in the VX900 branch. [1] www.jedec.org/sites/default/files/docs/JESD79-3E.pdf Change-Id: Ia8bb593e3e28a5923a866042327243d798c3b793 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3354 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04VIA Nano: Add microcode updates filesAlexandru Gagniuc
While we had support for updating microcode on the VIA Nano CPUs for a while now, we never included the actual microcode. Unlike, Intel and AMD CPUs, VIA microcode is not available for download, and was extracted from the vendor BIOS. It was not included in coreboot since we never had explicit permission to do so. I have just received confirmation from VIA that we can distribute the microcode. Change-Id: I4c15b090cd2713cfe5dc6b50db777ff89dbc0f19 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3357 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-06-04AMD Northbridge LX: get rid of #include "northbridge/amd/lx/raminit.c"Christian Gmeiner
Change-Id: I249c63646267ebe8dd8e06980aa6367a16fe7297 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3370 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04AMD Northbridge LX: convert spd_read_byte() to non-static versionChristian Gmeiner
Change-Id: Ie329606852dfd7109acb694e9a9ff851b023cc63 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3369 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04AMD Northbridge LX: move #include "northbridge/amd/lx/raminit.h"Christian Gmeiner
Move the include before static inline int spd_read_byte(). Change-Id: I4cac4b1f55368041b067422d95c09208e15d0f2d Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3368 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04AMD Northbridge LX: rename get_systop() to get_top_of_ram()Christian Gmeiner
Change-Id: I6126d575b8289f76b38858304836e3037200bcdb Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3367 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04AMD Northbridge LX: include northbridge.h in raminit.cChristian Gmeiner
Change-Id: Ic2f50ae184678637c611757d3391826c1d2719a1 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3365 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04AMD Northbridge LX: make GeodeLinkSpeed() function prototype non-staticChristian Gmeiner
Change-Id: Id914be1ae4dac96c51f2640f056af4ce58a248eb Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3364 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04AMD Northbridge LX: add some missing includesChristian Gmeiner
This commit fixes problems if we build raminit.c for romstage. Change-Id: Ic1380f3635ac28b939fa2a8ce614814012455c44 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3363 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04AMD Northbridge LX: make sdram_* function prototypes non-staticChristian Gmeiner
In order to get rid of the bad #include "northbridge/amd/lx/raminit.c" line we need to do some prepartion steps. This commit is one of them. Change-Id: I33173660bbda8894e7672e41e1b994d254d7ae8a Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3362 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04AMD Fam 15tn: Use all memory on systems with more than 4 GBSiyuan Wang
Take a Parmer board with 4G memory as an example. Use 'cat /proc/meminfo' to check memory, it reads 'MemTotal 3327540kB'. Parmer uses 512M as video memory when it has 4G. 3327540+512*1024 = 3851828(kB), so some memory is lost. When Parmer has 4G memory, TOM2 low is 0x1F000000, TOM2 high is 0x00000001. But in e820 table or coreboot table, the last item is 6: 0000000100000000 - 0000000118000000 = 1 RAM This is not correct, it should be 6: 0000000100000000 - 000000011f000000 = 1 RAM This patch changes the memory layout when TOM2 is set. Change-Id: I4e2d163ae8fe1e65ddc384b520a5112ca067b1d1 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3366 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-03dram: Add utilities for decoding DDR3 SPDsAlexandru Gagniuc
Add convenience utilities for decoding DDR3 SPDs and printing the information to the console. These have proven invaluable when writing the VX900 memory initialization. These are used in the VX900 branch Information printed has the following format: > SPD Data for DIMM 51 > Revision: 10 > Type : b > Key : 2 > Banks : 8 > Capacity: 1 Gb > Supported voltages: 1.5V > SDRAM width : 8 > Bus extension : 0 bits > Bus width : 64 > Optional features : DLL-Off_mode RZQ/7 RZQ/6 > Thermal features : ASR ext_temp_range > Thermal sensor : no > Standard SDRAM : no > Row addr bits : 13 > Column addr bits : 10 > Number of ranks : 1 > DIMM Capacity : 1024 MB > CAS latencies : 6 7 8 9 > tCKmin : 1.500 ns > tAAmin : 13.125 ns > tWRmin : 15.000 ns > tRCDmin : 13.125 ns > tRRDmin : 6.000 ns > tRPmin : 13.125 ns > tRASmin : 36.000 ns > tRCmin : 49.125 ns > tRFCmin : 110.000 ns > tWTRmin : 7.500 ns > tRTPmin : 7.500 ns > tFAWmin : 30.000 ns Change-Id: I30725a75caf74ac637db0a143344562bd9910466 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3267 Tested-by: build bot (Jenkins)
2013-06-03spd.h: Add all known SPD_MEMORY_TYPE definitions.Alexandru Gagniuc
This file was missing some definitions, so add them. Also turn the defines into an enum. The reason for doing this is that functions can now explicitly take an spd_memory_type as a parameter: > int do_something_with_dram(enum spd_memory_type type, ...) Which is a lot more explicit and readable than: > int do_something_with_dram(u8 type, ...) These are used in the VX900 branch. Change-Id: Ic7871e82c2523a94eac8e07979a8e34e0b459b46 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3266 Tested-by: build bot (Jenkins)
2013-06-03include/cpu/amd: Align `CPU_ID_EXT_FEATURES_MSR` with other definesPaul Menzel
Probably due to different (character) widths for a tab, sometimes only one tab was used for aligning the define `CPU_ID_EXT_FEATURES_MSR`. For the “correct” alignment, that means where a tab is eight characters, two tabs are necessary. Change it accordingly. Change-Id: I450a7796dc00b934b5a6bab8642db04a27f69f4b Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3263 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-03Asus F2A85-M: Fix the _CRS PCI0 bus infoRudolf Marek
On Asus F2A85-M, the Linux kernel complains that the _CRS method does not specify the number of PCI busses. [FIRMWARE BUG]: ACPI: no secondary bus range in _CRS Just put there 256. This should be part of re-factoring of the whole ACPI stuff. The same change was already done for the AMD Brazos (SB800) boards, based on commit »Persimmon DSDT: Add secondary bus range to PCI0« (4733c647) [1]. [1] http://review.coreboot.org/2592 Change-Id: I06f90ec353df9198a20b2165741ea0fe94071266 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/3320 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: David Hubbard <david.c.hubbard+coreboot@gmail.com>
2013-06-03AMD Geode CS5536: downgrade BIOS_ERRChristian Gmeiner
There is no need to use everywhere BIOS_ERR. Change-Id: If33d72919109244a7c3bd96674a4e386c8d1a19e Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3307 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Denis Carikli <GNUtoo@no-log.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-03console: add support for QEMU's debugconGerd Hoffmann
Add support for sending debug output to an I/O port. It can be used together with QEMU's isa-debugcon driver to log the coreboot output to a file. The port is configurable and defaults to 0x402 which has established as the de facto standard. For example, SeaBIOS+OVMF [1] use that one too. [1] http://www.linux-kvm.org/page/OVMF Open Virtual Machine Firmware Change-Id: I0803f7fc70030242f80003e25c9449c37d71975e Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3331 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-03haswell: allow for disabled hyperthreadingAaron Durbin
There were assumptions being made in the haswell MP and SMM code which assumed the APIC id space was 1:1 w.r.t. cpu number. When hyperthreading is disabled the APIC ids of the logical processors are all even. That means the APIC id space is sparse. Handle this situation. Change-Id: Ibe79ab156c0a171208a77db8a252aa5b73205d6c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3353 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-03haswell: fix overflow handling TOUUDAaron Durbin
It's possible that the TOUUD can be set to less than 4GiB. When that is the case the size_k variable is an extremely large value. Instead ensure TOUUD is greater than 4GiB before adding said resources. Change-Id: I456633d6210824e60665281538300fd15656b86d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3352 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-03Intel Lynx Point: LPC: Unify I/O APIC setupPaul Menzel
Remove local copies of reading and writing I/O APIC registers by using already available functions. This change is similar to commit db4f875a412e6c41f48a86a79b72465f6cd81635 Author: Kyösti Mälkki <kyosti.malkki@gmail.com> Date: Tue Jan 31 17:24:12 2012 +0200 IOAPIC: Divide setup_ioapic() in two parts. Reviewed-on: http://review.coreboot.org/300 and commit e614353194c712a40aa8444a530b2062876eabe3 Author: Kyösti Mälkki <kyosti.malkki@gmail.com> Date: Tue Feb 26 17:24:41 2013 +0200 Unify setting 82801a/b/c/d IOAPIC ID Reviewed-on: http://review.coreboot.org/2532 and uses `io_apic_read()` and `io_apic_write()` too. Define `ACPI_EN` in the header file `pch.h`. As commented by Aaron Durbin, a separate `pch_enable_acpi()` is not needed: “The existing code path *in this file* is about enabling the io apic.” [1]. [1] http://review.coreboot.org/#/c/3182/4/src/southbridge/intel/lynxpoint/lpc.c Change-Id: I6f2559f1d134590f781bd2cb325a9560512285dc Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3182 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-06-03Intel BD82x6x: LPC: Unify I/O APIC setupPaul Menzel
Remove local copies of reading and writing I/O APIC registers by using already available functions. This change is similar to commit db4f875a412e6c41f48a86a79b72465f6cd81635 Author: Kyösti Mälkki <kyosti.malkki@gmail.com> Date: Tue Jan 31 17:24:12 2012 +0200 IOAPIC: Divide setup_ioapic() in two parts. Reviewed-on: http://review.coreboot.org/300 and commit e614353194c712a40aa8444a530b2062876eabe3 Author: Kyösti Mälkki <kyosti.malkki@gmail.com> Date: Tue Feb 26 17:24:41 2013 +0200 Unify setting 82801a/b/c/d IOAPIC ID Reviewed-on: http://review.coreboot.org/2532 and uses `io_apic_read()` and `io_apic_write()` too. Define `ACPI_EN` in the header file `pch.h`. As commented by Aaron Durbin, a separate `pch_enable_acpi()` is not needed: “The existing code path *in this file* is about enabling the io apic.” [1]. [1] http://review.coreboot.org/#/c/3182/4/src/southbridge/intel/lynxpoint/lpc.c Change-Id: I4478b1902d09061ca1db8eab6b71fef388c7a74c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3183 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-06-03northbridge/amd/amdmct: Use `static const` instead of `const static`Paul Menzel
From ISO C99 standard: »The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature.« Found at <http://www.approxion.com/?p=41>. The following command was used to make the change. $ git grep -l 'const static' src/ | xargs sed -i 's/const static/static const/' As asked by Bruce Griffith, the changes in `src/vendorcode` were reverted as that is what AMD prefers. The same change was done already for AMD Persimmon in the following commit. commit 824e192809e021b3cdee947a44b3a18d276bdb35 Author: Jens Rottmann <JRottmann@LiPPERTembedded.de> Date: Wed Feb 20 21:24:20 2013 +0100 Persimmon: platform_cfg.h: Declare codec arrays as `static const` Reviewed-on: http://review.coreboot.org/2474 Change-Id: I233c83fdc95ea4f83f7296c818547beb52366a3d Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3197 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-03am335x: Clean up/fix some settings in the am335x Kconfig.Gabe Black
Some settings in the am335x Kconfig weren't actually used for anything, some where place holders, and some where left over from another CPU. The memory addresses are in the internal RAM in the SOC as described in the reference manual. The stack is put where the internal ROM had its stack, and the bootblock is put at the bottom of that region as the manual suggests. The ROM stage offset is set to 10K which is a bit bigger than the ~7.5K the bootblock currently takes up. Change-Id: I1a117d789a791d7e3db1118823f8216b3361433c Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3327 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-06-02Provide sane Kconfig default for cmos.default.Denis 'GNUtoo' Carikli
Without that fix we have with CONFIG_USE_OPTION_TABLE: OPTION cmos_layout.bin build/util/nvramtool/nvramtool -y /home/gnutoo/x86/coreboot-alix/src/mainboard/pcengines/alix1c/cmos.layout -L build/cmos_layout.bin make: *** No rule to make target `nvramtool', needed by `build/coreboot.pre1'. Stop. rm build/util/sconfig/sconfig.tab.c build/cbfs/fallback/bootblock.elf build/util/sconfig/lex.yy.c That log was captured with make V=1 but the error also appear with make. Tested on the PC Engines ALIX.1C with the following commit (Change-Id: Ia87b090) [1]: PC Engines ALIX.1C: Add CMOS defaults. [1] http://review.coreboot.org/#/c/3323/ Change-Id: I548005a58f430ed7b6da5249a24bbdcae440a1e9 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3223 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2013-05-31Lenovo ThinkPad X60: cleanup Native VGA init.Denis 'GNUtoo' Carikli
Change-Id: Iaefa23a6257fd0295357465eb03ccadbef0f70da Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3272 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-31AMD Trinity boards: Add reserved memory area for SPI base address in ACPISteven Sherk
- SPI controller base address gets overwritten by SD controller under Linux. - Reason for overwrite is the SPI base address isn't in a standard BAR and doesn't get automatically reserved. Solution is to add it as a reserved memory area in ACPI. - This issue was found on the ASUS F2A85-M platform. Currently a workaround on this platform was made as part of: http://review.coreboot.org/#/c/3167/3 - Once approved a follow-on patch for other southbridges using a non-standard BAR for the spi controller. Change-Id: I1b67da3045729a6754e245141cd83c5b3cc9009e Signed-off-by: Steven Sherk <steven.sherk@se-eng.com> Reviewed-on: http://review.coreboot.org/3270 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-31AMD Parmer: fix issue 'S3 fails to suspend after wake up from USB keyboard'Siyuan Wang
This issue can be reproduced in Linux by the following steps: 1) use pm-suspend to suspend. 2) use USB keyboard to wake up. 3) use pm-suspend to suspend. FAIL To SUSPEND. The cause of this issue is: USB devices use bit 11(0x0b) of GP0_STS represents S3 wake up event, but this bit is not clear after wake up. So OS thinks there is a wake up signal and wake up immediately. In this patch, I add AcpiGpe0Blk using MMIO access and write 1 on bit 11. I have tested on Parmer. Change-Id: Iec3078bf29de99683e7cd3ef4e178fbeb4dc09c1 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3347 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 20:22:00 +0000