summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2015-02-14AMD cimx/sb800: Move cimx init for ramstageKyösti Mälkki
This has nothing to do with SATA controller. We only need to fill the table with defaults before we parse devicetree for changes to device configuration. Change-Id: Ic4b28b5992ec9bfdf252f61b1c86b0162243cc95 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8386 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-14AMD cimx/sb800: Disable unused GPP portsKyösti Mälkki
If devicetree.cb has GPP port off, really disable it before even trying to do link training. Change-Id: I810945da28d86768e88249dc4d29a50ad9f9959b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8385 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-14AMD cimx/sb800: Fix PCI-to-PCI bridge 0:14.4 configurationKyösti Mälkki
A set of pins can be configured for GPIO or (parallel) PCI bridge use. When requested configuration is 0:14.4 enabled, register programming must be done before attempting to enumerate devices behind the bridge. When requested configuration is 0:14.4 disabled, we must not even temporarily enable pins for PCI use to avoid spurious GPIO state changes. As our PCI subsystem currently does not configure visible PCI bridges that are marked disabled, we cannot mark 0:14.4 disabled just yet but need to handle pcengines/apu1 as a special case. Drop related dead code. Change-Id: I8644ebae43b33121ef2a7ed30f745299716ce0df Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8329 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-14AMD cimx/sb800: Fix console outputKyösti Mälkki
These sb800_enable() messages without newline mess up the log. Change-Id: I1689b68702e08e2a287083835f310f52f495c451 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8384 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-14AGESA fam15tn fam15rl fam16kb: Drop HT3_SUPPORTKyösti Mälkki
Kconfig variable is not implemented. Change-Id: I546a1001847e7b1002f96baf49ed3301852a6894 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8345 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-14AGESA fam10 fam12 fam15: Always have HT3_SUPPORTKyösti Mälkki
Keep the slower HyperTransport configuration for a possible reference in fam15 boards. Change-Id: Ifcdedc6385fec80f7d02c55c2aac10e5e2429a18 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8344 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-14arch/x86/boot/tables.c: Remove unused variable assignment to `rom_table_end`Paul Menzel
Change-Id: I098d1238cda16060c3566f242443007cdaf9bd82 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5106 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-14drivers/xpowers/axp209: Print a message when probing failsAlexandru Gagniuc
Probing is done by reading the ID register and comparing it to a known value. When there is a mismatch, print an error. Change-Id: I36fb1fe9b56e97660556dcb27be25bfe5129ad73 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8433 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-02-14superio/fintek/f81216h: Add the correct unlock key valuesDave Frodin
The actual key values were not added in commit 17ace8255. TEST: amd/lamar shows the correct result. Change-Id: I8f20e3d0ce83dd87b6c233ee98c3e77a6b7c1b03 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8375 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: Marc Jones <marc.jones@se-eng.com>
2015-02-14arm64: Cleanup arch io header filesFurquan Shaikh
BUG=None BRANCH=None TEST=Compiles successfully for rush Original-Change-Id: Ic8f5d91f6635ef12845ab049a20df5a6e33bbf55 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/203142 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit ecf7822812d8745af74eaf135b7b806c23ef51a2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I79abbded94376ba90a8c729aaf856ce303509e48 Reviewed-on: http://review.coreboot.org/8410 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: Marc Jones <marc.jones@se-eng.com>
2015-02-14southbridge/amd/pi: Combine and correct the IRQ text stringsDave Frodin
This combines the Avalon and Bolton tables of text descriptions of the IRQ assignments. It also corrects the text string for the SD controller on Bolton. Test: This was verified on amd/lamar. Change-Id: Ibc74641eb4e1f7581f26d260ba3d33201bcbf5e7 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8374 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-02-13tegra132: Fix build for verstageMarc Jones
Verstage isn't included yet, but we need to have the Kconfig option for toolchain.inc to pass. Change-Id: I7fae73cd3b77fd347398221489caf745274701eb Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/8409 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-02-13northbridge/amd/amdfam10: Move K10 specific menu to proper Kconfig fileTimothy Pearson
Change-Id: Ib83ec5c397fdef5aa9e3376f1c0072cfa2f74fa6 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8425 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-02-13fsp_baytrail: Add macros to define 20K pull-up and downWerner Zeh
Add two macros to gpio.h which allow to setup 20K pull-up or pull-down resistor for a given GPIO. Change-Id: Ie3bc4d40df588ed682cc692e2a80527b9e62a483 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/8402 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-02-13Fix source code permissionsStefan Reinauer
Two source files were accidently marked executable. Switch them back to mode 644 (rw-r---r--) Change-Id: Ic96f6e5e9a05cbffb65cdfb627023d04d3866dc9 Signed-off-by: Stefan Reinauer <stepan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8426 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-02-12drivers/xgi: Fix user-visible typo in printkTimothy Pearson
Change-Id: I1e4c5c807d4a78844a40083178b6f96ffeb3659e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8361 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-12payloads/seabios: Enable SeaVGABIOS option if native text init supportedTimothy Pearson
SeaVGABIOS supports both the coreboot linear framebuffer and native EGA text mode. To use SeaBIOS interactively on standard VGA hardware a VBIOS is needed; SeaVGABIOS is one such option. TEST: Booted KFSN4-DRE with XGI Volari Z9s and SeaVGABIOS. Was able to interact with SeaBIOS and comboot menu, then booted Linux successfully. VGA display was continuously usable from power on to Linux login. Change-Id: Id4bd4cb5cece9114457633832c5f0e5280c02b47 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8368 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-12AMD K8 boards’ `romstage.c`: Spell sync*hr*onize correctlyPaul Menzel
Change-Id: I92e6e7f1292f66642aa0336064a4eccba104dd08 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5101 Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-02-11cpu/amd/model_10xxx: add Propus (00100F52h BL-C2) equivalent idNicolas Reinecke
Change-Id: I32eccfb4eae176e0155c53efaf463258653eefc2 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8355 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-02-11amd/amdfam10: Fix incorrect core count identificationTimothy Pearson
The core count identification code in the PowerNow! _PSS ACPI object generation code was incorrectly copied from the model_fxx code. This code has been rewritten to properly return the number of cores installed in the system. Change-Id: I19567486f2de9dc2c43970addf4d91fa3d233a99 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8421 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-02-11asus/m4a785/Kconfig: Add vgabios PCI idNicolas Reinecke
The PCI id defaults to 1106,3230 -> via chrome 9 ... Tested on the board. Change-Id: I5ad91faec9c97f34c8ca48eee9198237e9ea8336 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8177 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-11cpu/amd/model_10xxx: update microcodeNicolas Reinecke
microcode updates are extracted from: www.amd64.org/microcode.html Mircocode versions of 1020h and 1022h are more recent in coreboot than inside the AMD archive. Change-Id: I9f52accc1ebc7057890a769a059048e9982109d2 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8354 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-11mainboards/asus/kfsn4-dre: Run BSP FIDVID before AP FIDVIDTimothy Pearson
This resolves an issue on Shanghai dual CPU configurations where the APs on node 0 would not start. Single CPU configurations are unaffected by this issue. TEST: Booted KFSN4-DRE with dual Opteron 8389 CPUs and verified proper BSP/AP start and microcode patch levels. Change-Id: I0f5d4e0e356c6bd64e324b4399ef43b400ecab0c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8397 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-11cpu/intel: >= nehalem: add comments to msr finalize'sAlexander Couzens
Improve documentation of lock down MSRs in finalize(). Most of these aren't documented in public MSRs. Change-Id: I4fc47bb9b71bdd7907aae65fc18b419a17ae8547 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/8294 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2015-02-10PCI subsystem: Remove AGP bridge typeKyösti Mälkki
There is no auto-detection for AGP type and we have no hardware that selects this. Furthermore, we treat AGP bridges just like PCI bridges, there is no optimisation for higher bandwidth. Change-Id: I4fe87c83411643cb9b8d3216f2af07bf098174d3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8367 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-10Baytrail_fsp: Make ME path configurable in menuconfigWerner Zeh
By adding a description to ME_PATH it becomes visible and editable in menuconfig. Change-Id: I8c2f6a30c10f16b19f3667263db02c93688c9f8f Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: http://review.coreboot.org/8398 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-10lenovo/x200: Increase default CBFS_SIZE to 2 MiBMichał Masłowski
The original firmware has a 2 MiB BIOS region in both 4 MiB and 8 MiB flash variants. Let's allow using the whole region instead of the gm45 default of 1 MiB. Change-Id: I2d8a04bcb992bf2e8e15890a5c6719810b1cf405 Signed-off-by: Michał Masłowski <mtjm@mtjm.eu> Reviewed-on: http://review.coreboot.org/8392 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-10amd/amdfam10: Fix invalid transition latency in PowerNow! _PSS objectsTimothy Pearson
Fix a mistake that led to an invalid 0ms latency in the automatically generated PowerNow! ACPI _PSS objects. TEST: Booted FreeBSD and Linux and verified correct latency values. Found-by: Coverity Scan Change-Id: I03cecab694708136dc555ca2af7ee9a0bf9be5af Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8376 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-02-09fsp_baytrail: Get FSP reserved memory from the FSP HOB listMartin Roth
Because the pointer to the FSP HOB list is now being saved, we can use that to find the top of usable memory. This eliminates the need to hardcode the size of the FSP reserved memory area. Tested on minnowboard max for baytrail. The HOB structure used does not seem to be present for the rangeley or ivybridge/pantherpoint FSPs. At the very least, the GUID is not documented in the integration guides. Change-Id: I643e57655f55bfada60075b55aad2ce010ec4f67 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8308 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-02-09Get rid of .car.global_data warnings for GCC buildMartin Roth
The "used" attribute was added in commit 27cf2472 which caused these warnings to start appearing when using the standard coreboot GCC toolchain: {standard input}: Assembler messages: {standard input}:96: Warning: ignoring changed section type for .car.global_data {standard input}:96: Warning: ignoring changed section attributes for .car.global_data The # at the end of the section name causes the assembler to ignore everything following the name. I verified that the resulting binaries are the same with and without the #. Change-Id: Iaac8042533842ed887f33895f083b613a18f496a Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8301 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-02-09Intel FSP platforms: Fix timestampsKyösti Mälkki
Now that BROKEN_CAR_MIGRATE is fixed we can stash these in CAR. Change-Id: I49c31b91f34d415778797d08a347a51dbef797e3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8024 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-02-08lenovo/t430s: Add new port.Nicolas Reinecke
The port is based on the x230 / t530. Tested - is in active use. Change-Id: Ic5ccfe70343e8aef3465690edce9cdebf153a44d Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/8359 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-06drivers/pc80/mc146818rtc: Reduce superfluous preprocessor useAlexandru Gagniuc
cmos_init() had layers of preprocessor directives, which resulted in a complete mess. Refactor it to make use of the IS_ENABLED() macro. This improves readability significantly. One of the changes is to remove in inline stub declaration of (get|set)_option. Although that provided the ability for the compiler to optimize out code when USE_OPTION_TABLE is not selected, there is no evidence that such savings are measureable. Change-Id: I07f00084d809adbb55031b2079f71136ade3028e Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8306 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-02-06include/types.h: Provide BIT() macroAlexandru Gagniuc
This macro is controversial for arches where the bits are numbered MSb first, though we don't support such an arch. We've seen this macro creep into our tree in different places, so provide it in one place. Change-Id: I86cd8a16420f34ef31b615aec4e0f7bd3191ca35 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8280 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@gmail.com> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2015-02-06mainboards/asus/kfsn4-dre: Indicate native text mode init supportTimothy Pearson
Change-Id: Ib00ecdcad17fa5c0300d22378837e36d0918f9db Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8369 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-06drivers/xgi: Fix legacy VGA text mode initializationTimothy Pearson
TEST: Booted KFSN4-DRE with on-board XGI Volari Z9s Initial text from coreboot appeared, and the Linux console was displayed immediately at the start of kernel initialization. After boot was complete the text mode console continued to behave normally. SeaBIOS does not currently make use of the legacy VGA text-mode display. Change-Id: I2177a1d00e6f07db661dd99fe0184e2c228404d1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8360 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-06intel/fsp_rangeley: Indent '#define' consistentlyYork Yang
The indentations of #define are not consistent in chip.h. Update to make all #define indentations being aligned and put them after the variable declaration. Change-Id: I37550acac18bac3efddb580ef6b956be0e2b357a Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: http://review.coreboot.org/8333 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins)
2015-02-06FSP & CBMEM: Fix broken cbmem CAR transition.Martin Roth
1) Save the pointer to the FSP HOB list to low memory at address 0x614. This is the same location as CBMEM_RESUME_BACKUP - the two aren't used in the same platform, so overlapping should be OK. I didn't see any documentation that actually said that this location was free to use, and didn't need to be restored after use in S3 resume, but it looks like the DOS boot vector gets loaded juat above this location, so it SHOULD be ok. The alternative is to copy the memory out and store it in cbmem until we're ready to restore it. 2) When a request for the pointer to a CAR variable comes in, pass back the location inside the FSP hob structure. 3) Skip the memcopy of the CAR Data. The CAR variables do not get transitioned back into cbmem, but used out of the HOB structure. 4) Remove the BROKEN_CAR_MIGRATE Kconfig option from the FSP platform. Change-Id: Iaf566dce1b41a3bcb17e4134877f68262b5e113f Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8196 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-02-06TPM: Fix whitespaceKyösti Mälkki
Change-Id: I2d00a2964b16436356c5e02764897e37ef610efc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8343 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-05mainboards/asus/kfsn4-dre: Enable native VGA initializationTimothy Pearson
Change-Id: I953ced7d34af9ec0923fa6df93b9ad4270196c77 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8332 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-05drivers/xgi/z9s: Port Linux framebuffer initialization to corebootTimothy Pearson
Add native XGI Z9s framebuffer support to coreboot XGI initialization code largely taken from Linux 3.18.5 TEST: Booted KFSN4-DRE with XGI Volari Z9s into SeaBIOS with SeaVGABIOS enabled. Text appeared correctly on screen and interaction with graphical comboot menu was successful. However, Linux cleared the framebuffer on boot, rendering the screen useless until Linux loaded its native xgifb driver. Change-Id: I606a3892849fc578b0c4d74536aec0a0adef3be3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8331 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-02-05southbridge/amd/pi: write_hpet requires additional config optionDave Frodin
This copies what was done in southbridge/amd/agesa in: commit 56f46d8 agesa/family15tn: Switch to per-device ACPI TEST: amd/lamar. Change-Id: Id8890ccd4a1ea783ad4740333ae6b061b6bbd7fc Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8288 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-05southbridge/amd/pi: Update Kconfig and makefiles for boltonDave Frodin
Change-Id: I208c931bdaee572c9df11b35c1e6e9f27609ea6c Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8287 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-02-05southbridge/amd/pi: Add the bolton definitionsDave Frodin
This adds the PCI and interrupt related definitions for the bolton specific features. Change-Id: Ia6530c57ec5a4a5c4525bfbae0eb5db04c0bef9e Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8286 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-02-05AMD HyperTransport: Drop unused link optimisationKyösti Mälkki
Change-Id: Ia4398f6eb013c69838487bdd02d094f97d7224b6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8342 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-05AMD K8: Remove some excessive preprocessor useKyösti Mälkki
Tests on CPUID are valid regardless of revision. Change-Id: I5a3a01baca2c0ecfb018ca7965994ba74889a2e2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8337 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-05newisys/khepri broadcom/blast: Drop duplicate entry in KconfigKyösti Mälkki
Keep the value that is listed first, it also the one with a more recent change. Change-Id: I0336c962544d75f94512563c08f280aa43c7a175 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8336 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-05AMD8131: Remove obsolete directoryKyösti Mälkki
Change-Id: I875384e55a4a71d1a5c962d128d13356f3befa56 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8335 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-04superio/fintek: Add required changes so F81216H can be usedDave Frodin
The amd/lamar mainboard is the first mainboard to use the f81216h. These changes are needed to fix up commit 27a63d77 so the Super I/O builds and functions correctly. - Wrong #include name - Removed global variable in romstage - Missing "case" in switch() Change-Id: I1b2058a915b776664fba14e4341e8a410b50330f Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/8255 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-02-03cpu/amd (non-AGESA): Remove terminator from microcode blobKyösti Mälkki
Change-Id: I6370e971922dee5e8d476a883c5f0f32fbbc8911 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4534 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 13:23:28 +0000