| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I81de291da7b3db8d04a127d5a304b558f1c75b34
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5535
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This function isn't used on hudson, and seems to be copy-paste from
older southbridges. It is used in sb700 to enable or disable certain
PCI devices. On hudson, these configuration bits are moved to the PM
space.
Change-Id: I9b967a2d0a5dddc8341204dadeed90460251915c
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5513
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Dumping ACPI tables in canonical form has very little value, and is
of questionable use except when debugging acpigen. Remove the code
which dumps the tables.
Change-Id: Id13c88cee8674b13e5cf5b5ed32c26283e586fd9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5526
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The EC may disable some functionality, such as Caps Lock LED and
battery charging if it never receives a command to go in APM mode. If
we start it in APM mode, then immediately switch to ACPI mode, it will
not get its SCIs serviced until an ACPI OS boots. If its SCIs are not
serviced, it may assume the OS has hung.
The way we solve this is to initalize the EC in APM mode, and only
switch it to ACPI when an ACPI-capable OS issues the ACPI_ENABLE
command. The switch has to be handled in SMM.
Although we aren't yet processing SMIs from the EC, we are reading the
status in order to satisfy the EC that the event is handled.
Change-Id: Iffaeb9a6f57841f456c4bce8337dc09b287f8758
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5512
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Change-Id: I9c41cccf9058c48006b247aca705a3f869ae82a6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5524
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This enables the ACPI SMI command port in the FADT table, and sets up
the hardware accordingly. If we have SMI enabled, then we don't set
the SCI_EN bit at boot, causing the OS to send the ACPI_ENABLE
command, as required by the ACPI spec. This gives us a chance to hook
into the mainboard_smi_apmc() handler.
Change-Id: Ib4c63d55b3132578dcae48bfe2092d4ea35821dd
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5511
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Change-Id: Ifc368974a7a0dc0756431654fb89668e3846801a
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5502
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This sets up the infrastructure to handle SMIs generated by the Hudson
southbridge. An API for interfacing to mainboard handlers is not
defined at this point. A few functions are defined to allow mainboard
code to enable SMIs from GEVENT pins. These are the only functions which
I expect to be needed anytime in the foreseeable future.
SMIs are always acknowledged and cleared, as not clearing an SMI will
cause us to re-enter the SMI, effectively bricking the machine if a
southbridge-generated SMI without a handler occurs.
Change-Id: Ibceb21ac5423eb134d3eb7d24800280b183f7619
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5494
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Tested-by: build bot (Jenkins)
|
|
This is a small implementation which uses only MSRs and rdtsc, without
relying on northbridge or other system hardware. It's SMM safe in that
it only reads registers, and doesn't modify the state of the hardware.
Change-Id: Ifa02ca73455b382f830c9b30b80b4f1bb18706b4
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5501
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This is the minimal setup needed to be able to execute SMI handlers.
Only support for ASEG handlers is added, which should be sufficient
for Trinity (up to 4 cores).
There are a few hacks which need to be introduced in generic code in
order to make this work properly, but these hacks are self-contained.
They are a not a result of any special needs of this CPU, but rather
from a poorly designed infrastructure. Comments are added to explain
how such code could be refactored in the future.
Change-Id: Iefd4ae17cf0206cae8848cadba3a12cbe3b2f8b6
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5493
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
The MMIO region is set up by AGESA very early on, so we can use it to
access the PM register space in ramstage. 16-bit accessors are also
provided to simplify some setup tasks. 16-bit accesses are not
possible via PIO.
The pm2_iowrite/read accessors are removed, as they are not used.
Change-Id: Ie7967b5086eb004525c39721338c6495aedc8165
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5503
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Change-Id: I45084ffe84fef4dd43acea843d7c93a81c255472
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5523
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Not used with AGESA vendorcode.
Change-Id: I4de7e49d513a1bc8d6d4da1eea630b9eedf5de80
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5522
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Not used with AGESA vendorcode.
Change-Id: I1c4e1dea8836143334d336f99afcee2ca326b0c9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5521
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Not used with AGESA vendorcode.
Change-Id: Ic9a0513641bf76d748bb106675bccc33c7abe21e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5520
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Not used with AGESA vendorcode.
Change-Id: Ie99abf5bcffd740e2e7ed6d78937ab32935ef214
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5519
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
This config option is fam10 only.
Change-Id: I7f4619d2d4e7e7695a8ee691d879df2748f1c0c7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5518
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
There are 3 steps to enable the IMC fan control:
1. Enable fan control related registers on Hudson using oem_fan_control().
2. Set EcStruct.
3. Enable thermal zone using enable_imc_thermal_zone().
I have tested on Thatcher.
Change-Id: I959721b4fd8787ac0824f9f873efd4788682eedb
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/5359
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Other toolchains just don't cut it.
Change-Id: I7a0bdf60d89b5166c9a22c9e9f3f326b28f777b8
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4584
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This causes coreboot to call the keyboard initialization code for the
KBC. This is only needed for payloads which do not initialize the
keyboard.
Change-Id: Id0bb77f2a8115fafc0cd6165a8431a7e07f0fac1
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5514
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Following the same reasoning as commit
ee905a8 vendorcode/amd/agesa/fam15tn: Build as a static library
Since AGESA is stage-independent, we can build it just once, and use
the resulting static library in both rom and ram stages.
Change-Id: I8b78c462f4963fbb3a40d739196529fffedccb4c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5441
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Following the rational of:
5188d40 jetway/nf81-t56n-lf: Use hexdump() for dumping ACPI tables
Use "Debugging -> Output verbose ACPI debug messages" in menuconfig to
toggle.
Change-Id: Ibf03ef916a789d0f049190755213ba93191d4662
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5507
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Turns out we have a CONFIG_DEBUG_ACPI definition under:
Debugging -> Output verbose ACPI debug messages
Hence, let us make use of this definition.
Change-Id: I1b673feb6d9b2ee51c832a1cef159cd80e5c3517
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5506
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Keep under 80 colums and Doxygen'ify inline documentation somewhat.
Strip some whitespace bulk while here and refactor a little as to line
wrap.
Additionally, following the reasoning of:
0b2fa34 hp/pavilion_m6_1035dx/buildOpts.c: Remove commented out tables
remove some fluff from buildOpts.c
Change-Id: Icb38f087724d3e3511df1d554a620eb637ce286a
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5481
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Try to conform to some kind of standard/consensus for prototype
location. Correct headers while here.
Change-Id: Ie99b1801fa42ddefb9f25d54f326ba7131bd7089
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5499
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Just like in commit
* 1d87dac hp/pavilion_m6_1035dx: Sanitize #includes
Include AGESA headers specifying the path relative to AGESA_ROOT. The
path is specified relative to AGESA_ROOT as opposed to src/ since this
code may include headers from different AGESA families, depending on
the board.
Change-Id: Ide38cc34e207a8b617d1d319fd9c17a785f55833
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5423
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Up until now, we were building AGESA by specifying each AGESA source
file and adding it to the list of romstage and ramstage source files.
As a result, we were compiling each AGESA source twice, despite the
fact that it does not depend on the stage we're in.
Since AGESA is stage-independent, we can build it just once, and use
the resulting static library in both rom and ram stages.
We still keep the practice of specifying every single AGESA directory
as an include dir and adding the AGESA CFLAGS to our global CFLAGS;
this is needed due to the way AGESA builds.
Change-Id: I9b23264129d1c08cb67cabc31d15a68d43ed7624
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5430
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Change-Id: I07725b71508c8b08451022307ae934c1b227f7f9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5491
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Use hexdump() instead of a local implementation for dumping ACPI_TABLES.
Change-Id: I20354a4f9dff4105de5af696bb9da4a4f6cca788
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5466
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Not all boards which use the AMD Hudson southbridge have IDE. However,
the southbridge's asl included an 'ide.asl' file which had to be
present in $(mainboard_dir)/acpi.
Address this issue by removing the inclusion of 'ide.asl' from the
southbridge 'fch.asl' and remove 'ide.asl' from Hudson boards, none
of which have IDE.
If future hudosn board will come with IDE, the device can be declared
in the PCIO scope of dsdt.asl, right below the inclusion of 'fch.asl'.
Change-Id: Ie2efb7ebf8f5b527e26d7aaaeafbd3053a9a6b28
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5459
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Follow along hudson, cut out "SLP_TYP type was 0" excessively filling
the buffer. We could make this conditional on non-zero?
Change-Id: Iffd4c146b2ac4f57dbc3a011a683c92b6e132e39
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5495
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The EC is now set to ACPI mode, and properly generates SCIs on
external events. This fixes the issue where battery notifications were
not working.
The keyboard matrix type is also explicitly set up.
Change-Id: Ib6f0d23984d4ed1320340282469b8325c83547d1
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5471
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Not all boards which use the AMD cimx/sb800 southbridge have IDE.
However, the southbridge's asl included an 'ide.asl' file which had to
be present in $(mainboard_dir)/acpi.
Address this issue by including ide.asl only in boards which have IDE,
and remove it from all other cimx/sb800 boards.
Change-Id: I57fcb4db9f85234b05ae1705ef81a576c478cee6
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5460
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Serialize methods against the construction of same (named) objects by
competing threads. See ACPICA BZ 909 for further details.
This change fixes issues that show up with the Ubuntu firmware test
suite (fwts) ACPI table sanity checker.
Change-Id: I49e3050a2a5aece6f031122b0211c056938d1a89
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5458
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Following the same reasoning as in commit
* 1d87dac hp/pavilion_m6_1035dx: Sanitize #includes
include AGESA files with a path relative to AGESA_ROOT. We cannot
with more than one generation of AGESA, hence the path being relative
to AGESA_ROOT.
Change-Id: If15c4cbfd42e0264264fdb3e8c426a47609ad41f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5426
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Try to use void and uint*_t type specifiers in place of VOID and UINT*
respectively. Use const in place of CONST type modifier. Remove some
useless type casts.
A few unneeded comments containing the AGESA redefenied types are also
removed.
Change-Id: I4bff96a222507fc35333488331c3f35ef1158132
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5486
Tested-by: build bot (Jenkins)
|
|
Replace usage of AGESA poor reinvention of memset/memcpy functions with
the usual standard ones.
Change-Id: Ibfe9ee253d57140b06a4fca6b47b2051308ad012
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5484
Tested-by: build bot (Jenkins)
|
|
This is sufficient to at least allow linux to recognize the lid switch
and read its state correctly.
Change-Id: Id5bd92466c72559f263c7ca8d23cbc741377a762
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5464
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Only the WLAN control pin and the lid switch input are declared, as
those are the only pins whose function is known and tested.
Change-Id: Ia5871882884ba9bb6d63418b34e33f92ead669eb
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5463
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Hook in the EC ASL code. This provides just enough information for the
OS to be able to read the battery information.
EC notifications (_Qxx) do not yet work, and it is unclear if the
issue is in the ACPI code, or if the EC is not set up properly. Thus,
the OS must boot with the battery inserted in order to be able to read
its status.
The _L03 ACPI method is also removed, as the EC SCI uses this event.
Change-Id: I85cbaeb9c77e60bd1c68d928412f897de50c6329
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5445
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The GP15 ACPI object was used to get the state of the lid. However
GP15 is specific to certain Intel chipsets, and will not always be in
the ACPI namespace. Instead of hardcoding this object, let the
mainboard define it.
Also, document the ACPI interface for the EC.
Change-Id: I02a2eb3116af61ea5701f84507327aa40218597a
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5444
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Otherwise we generate a recursive dependency because
CPU_AMD_AGESA depends on the per-family configurations
while those only exist if CPU_AMD_AGESA is selected.
Change-Id: Ic08d517ff4ca8bb76afc1574b55c54b28ec3f1b0
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5490
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
These are the .h and .c files from Intel that support interaction
with the FSP. These have been modified from the FSP distribution
only to strip trailing whitespace.
Intel® Firmware Support Package for Intel® Atom™ Processor C2000
Product Family (Formerly Rangeley)
"Intel® Firmware Support Package (Intel® FSP) provides key
programming information for initializing Intel® silicon and can be
easily integrated into a boot loader of the developer’s choice.
It is easy to adopt, scalable to design, reduces time-to-market, and
is economical to build."
http://www.intel.com/fsp
Change-Id: I9ed94cb92909c3681cc88bf10b85a9ba25e8fc55
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/5457
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
These are the .h and .c files from Intel that support interaction
with the FSP. These have been modified from the FSP distribution
only to strip trailing whitespace.
Intel® Atom™ processor E3800 product family (formerly Bay Trail)
"Intel® Firmware Support Package (Intel® FSP) provides key
programming information for initializing Intel® silicon and can be
easily integrated into a boot loader of the developer’s choice.
It is easy to adopt, scalable to design, reduces time-to-market, and
is economical to build."
http://www.intel.com/fsp
Change-Id: I0fa64dbaf640493cdb5e670e8d213a49d9e7dcfb
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/5456
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
These are the .h and .c files from Intel that support interaction
with the FSP. These have been modified from the FSP distribution
only to strip trailing whitespace.
Intel® Firmware Support Package for Intel® Xeon® E3-1125C v2,
E3-1105C v2, Intel® Pentium® Processor B925C, and Intel® Core™
i3-3115C Processors for Communications Infrastructure with
Intel® Communications Chipset 89xx Series Platform Controller Hub
(formerly Crystal Forest Refresh: Ivy Bridge Gladden and Cave Creek
"Intel® Firmware Support Package (Intel® FSP) provides key
programming information for initializing Intel® silicon and can be
easily integrated into a boot loader of the developer’s choice.
It is easy to adopt, scalable to design, reduces time-to-market, and
is economical to build."
http://www.intel.com/fsp
Change-Id: Ib76e89b2d2f6407cf55a5a664da989c7a7e0eb23
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/5455
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Other FSPs have more than just the initial fsphob.c source file.
Add any .c files in the srx directory to the ramstage build.
Change-Id: I5118bdcca44935b579809c4fc9566ab7914a6e4b
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/5454
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
GP0e does not fit into the naming scheme of the field units surrounding
this field unit definition. Also the keys for e and 3 are close to each
other supporting the theory that this is indeed a typo.
Change-Id: I43cf288fe1e0240b33971073c1aa8a1db5762e31
Reported-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5483
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The ROM address range is set up in the LPC PCI device, register 0x6c.
Coreboot already sets that up correctly in the bootblock, however
AGESA overrides that to 0xffffff00, which will always map the ROM from
0xff000000. This may conflict with other devices which are assigned
address space in that range.
If a device is assigned a range between 0xff000000 and the real ROM
base, accesses to that device will be diverted to the system ROM,
regardless of how other BARs are set up. Since we already need to set
up the ROM address range in the bootblock, before calling AGESA, just
remove the override from AGESA.
Note that not all AGESA versions override this mapping.
Change-Id: I592e5d087ed830c9604a04a356912c7654ce56d2
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5467
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
According ACPI specification:
"""
The \_PIC optional method is used to report to the BIOS the current
interrupt model used by the OS. The argument passed into the method
signifies the interrupt model OSPM has chosen, PIC mode, APIC mode,
or SAPIC mode. Notice that calling this method is optional for OSPM.
If the method is never called, the BIOS must assume PIC mode.
Arguments: (1)
Arg0 – An Integer containing a code for the current interrupt model:
0 –PIC mode
1 –APIC mode
2 –SAPIC mode
"""
In current configuration with default value of interrupt model
PMOD equal 1 (APIC mode), Linux can't boot with "noapic" option.
Kernel never call _PIC method and PMOD stays equal 1, indicatind
that APIC routing objects should be evaluated. This mix of PIC
and APIC leads to boot fail.
Change default value of interrupt model PMOD to 0, for correct
"noapic" boot.
Change-Id: I7fa6f0c24802751202ed2e7f13411001a600e772
Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru>
Reviewed-on: http://review.coreboot.org/5473
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Step 2: change the Lenovo X230 code to adapt it to the new board's
hardware with the great guidance from Vladimir (phcoder) to find the
correct GPIO's.
The machine has:
- Chipset: Intel QM77
- GPU's: Intel Integrated HD Graphics
: Discrete NVIDIA NVS 5400M (1 GB VRAM) with Optimus Technology
Change-Id: Iee12c3edc22df4a7935b7fb7ff4a320c21c4239b
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5391
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
