summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2018-08-07security/tpm: Check for NULL pointerFurquan Shaikh
Change bce49c2 (security/tpm: Improve TCPA log generation) missed checking for NULL pointer before accessing the tcpa_table returned by tcpa_log_init. This change fixes the boot hang observed on octopus by ensuring pointer is checked for NULL before using it. BUG=b:111403731 TEST=Verified that octopus boots up fine. Change-Id: I2e46197065f8db1dc028a85551546263e60d46b2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-07sb/intel/i82801[ijg]x: remove stale board-specific comments from ich*.aslStefan Tauner
Apparently they were introduced when refining ICH7 support when porting Kontron 986LCD-M and then copied over to ICH9 and 10. Change-Id: I2d9ece608955310d22b79574b9113a1521b2076c Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/27855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-07mb/google/poppy/variants/nautilus: Set CABC_EN to GPO high before EDP power onSeunghwan Kim
If GPP_E22(CABC_EN) remained floating GPI(SoC default) at V3.3_DX_EDP on, it may cause damage on the GPIO pad. To prevent, we would set this pad to GPO on romstage before EDP power on. Since we need to cover all systems in market, I put it into romstage instead of early_gpio_table. BUG=b:111860510 BRANCH=poppy TEST=Verified CABC_EN is set to GPO high 5ms before EDP power on Change-Id: I34e2fe86329a88eb05e0ea3c6beac6a64754b41e Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-07mb/google/poppy: Add variant callback for romstage GPIO configurationFurquan Shaikh
This change adds variant callback to get GPIO configuration table in romstage and configures these GPIOs before memory training is performed. BUG=b:111860510 BRANCH=poppy Change-Id: I1eb51356fb3f4c0f4ff29b22dbcde6dbece303ad Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-07mb/google/poppy/variants/nautilus: Add SKU info to SMBIOSFurquan Shaikh
This change provides implementation of smbios_mainboard_sku() to add proper "skuX" string to SMBIOS table 1. BUG=b:112163362 TEST=Verified "dmidecode -t 1" reports skuX correctly. Change-Id: I7e42d2c80d791ea7170d066d2eeaa0c6811eb9c9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-06soc/amd/stoneyridge: Call AMD ALIB method with AC/DC stateMarc Jones
AMD ALIB Function 1 accepts the AC/DC startup state. This is reported to be required for AMD PSPP settings. BUG=b:112020107 TEST= build test Change-Id: Ibb6c872d84745217912956c15d6ca2e8ba387561 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27785 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-06mainboard/google/kahlee: Add PSPP override settingMarc Jones
Add default PSPP AGESA setting for Kahlee/Grunt mainboards. BUG=b:112020107 TEST= build test Change-Id: I8a8605402379de88a04f3a16553c308513fa1531 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06google/grunt: Move PSP_SELECTABLE_SMU_FW to socRichard Spiegel
Now that an updated bootloader with important fixes is available at coreboot repository, all stoneyridge boards should use it. Move the selection of SOC_AMD_PSP_SELECTABLE_SMU_FW from mb/google/kahlee to soc/amd/stoneyridge. BUG=b:111428800 TEST=Build and boot grunt. Change-Id: Idf8e348efbc85569aa1163125f412c5242c46eb4 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27844 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-06src/soc/intel: Add AML IGD in platform reportingGaggery Tsai
This patch revises IGD naming and adds AML IGD in platform reporting. BUG=None BRANCH=None TEST=emerge-atlas coreboot chromeos-bootimage & Ensure AML IGD is shown in platform reporting. Change-Id: Id8f8379703abdaa5b14a4337a4fca04b370f3a2a Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/27846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06soc/intel/skl: Add AML IccMax and remove unused infoGaggery Tsai
This patch adds AML IccMax for VR configuration. From doc #594883, the IccMax for Core was changed to 28A, we need this patch to accommodate the changes. Besides, removes unused sku information from sku_icc_max_mapping structure. BUG=b:110890675 BRANCH=None TEST=Remove icc_max from DT & emerge-atlas coreboot chromeos-bootimage & Tested with AML-Y and KBL-Y SKUs. Change-Id: Ic22bae162b58b06b9519f1b708be55bde5e4641e Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/27610 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-06mb/google/octopus/variants/baseboard: Update Power Limit1Sumeet Pawnikar
Update power limit1 value from 8W to 10W. There is an error in the energy calculation for current VR solution on GLK. Experiments show that when power limit1 set to 10W, gained performance improvement with SoC TDP reaches max (6W) power. BUG=b:79779737 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: Ic320d442e7401e4be2e8e16d691db4c803f0fdc1 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/27819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06soc/amd/stoneyridge: Enable spread spectrum in bootblockRaul E Rangel
setup_spread_spectrum is called in early_init, meaning the console is not initialized yet. So you won't see boot block booting twice. BUG=b:111610455 TEST=booted grunt and verified that AmdInitReset does not reboot. I had AGESA patched to skip the JTAG check. Change-Id: Ia036ea513ac67d4b8bcf5a78029d969a4ae012a6 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06vendorcode/intel/fsp/fsp2_0/glk: Add nWR config in Odt ConfigKane Chen
From doc 571118, the bit 5 of OdtConfig is nWR config. If the bit 5 is set, MRC will set MR1 nWR field to 24. If the bit 5 is clear, MRC will set MR1 nWR field to 6. Change-Id: Ic8e4e2ffb098c8ba2f670535981e9a30c3d45b64 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/27814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-06mb/google/octopus/variants/fleex: Enable Weida touchscreen deviceCrystal Lin
This change adds ACPI properties for WDT8752A device. BUG=b:111402335, b:111102092 BRANCH=master TEST=Verify touchscreen on fleex works with this change Change-Id: Id186d5b87343007ae7e631d5d27464ee27e5b27d Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add rammus devicetree.cbZhuohao Lee
Use the default value for Iccmax which is specified in vr_config.c. The AcLoadline and DcLoadline keep the poppy value. Besides, the USB 2.0 ports located on the mainboard are set to USB2_PORT_SHORT and the others on the daughterboard are set to USB2_PORT_LONG. Those setting need to be fine tuned later. BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: Icabfac04c94b3d480872c243d811509e274ef122 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add gpio settingZhuohao Lee
The gpio setting is based on the proto board schematics BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I20fc081d372b8686f6128a7e85276f9c6798b199 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add memory configurationZhuohao Lee
Add memory configuration based on the proto board schematics BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I45efdc7893b5bcbca0de6e932e1452cc1a2ff028 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add audio, mic and codec configurationZhuohao Lee
Rammus uses DA7219 Headset, Maxim MAX98927 Smart Amps and 4 channel dmic BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: If21a3870ee4b000a776d2f3e025fb43ef2fe48c7 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: change build directory to rammusZhuohao Lee
Move the build board directory from poppy to rammus. BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I3a9fc2bbfe7261661f0c5c073baff0ff1434d09f Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mp_init: fix typoRaul E Rangel
BUG=none TEST=none Change-Id: Ic2d7bf5f5335894ede98dc7e6cc6a65e4897e487 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06mb/google/kahlee: Disable SATA in all boardsRichard Spiegel
Kahlee based boards don't use SATA, so disable SATA on all boards to save power. BUG=b:112139043 TEST=Build and boot grunt, checked the absence of SATA PCI. Change-Id: I6a12c03a5a95b1c8b40609a3fe656df92548b80b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06soc/amd/stoneyridge: Disable SATA based on devicetree settingRichard Spiegel
Grunt boards don't use SATA, so it should be disabled to save power. Check if SATA is enabled in devicetree, and enable/disable the device based on that setting. BUG=b:112139043 TEST=Buil and boot grunt, checked the absence of SATA PCI. Change-Id: I4a3b5f65e612e8da5bedff0c557a0850f350dfa8 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-05southbridge/intel/bd82x6x/Kconfig: Do not include any IFD by defaultAngel Pons
Since only a handful of boards have descriptor blobs in the tree, it makes no sense to have `HAVE_IFD_BIN` enabled by default then disabled on each mainboard. This patch flips the default value of said variable, rendering all current overrides unnecessary. The few boards which have an IFD in the blobs repo use `select HAVE_IFD_BIN` to enable adding the IFD by default. Since `HAVE_ME_BIN` depends on `HAVE_IFD_BIN`, the former has been removed alongside the latter, and has been added to the boards with a ME blob as `select HAVE_ME_BIN`. Both `HAVE_IFD_BIN` and `HAVE_ME_BIN` have been removed from autoport as well. Change-Id: I330c4886f8bea4b1a8ecad6505a0e5cc381654d1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/27218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-04x4x/raminit_ddr23: use MCHBAR AND/OR/AND_OR macros [2/2]Felix Held
This patch contains the parts that changed the hash of the generated binary; probably due to the compiler optimizing things slightly different. Change-Id: I3233ba1747dcf5ad05b2ad771a86e3936f655d1c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-04nehalem/raminit: remove read_mchbar functionsFelix Held
Change-Id: I7935cc166aa39f4053f45eef925d92ce50fd98ba Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-04nehalem/raminit: clean up code and remove write_mchbar functionsFelix Held
This part of the cleanup patches changes the hash of the output binary; likely due to the compiler optimizing things differently. Change-Id: I1a22f6216a75e2b463d4e169e97ad6e0bbaafae8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27708 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-04northbridge/nehalem: add MCHBAR8/16 AND_OR macrosFelix Held
Change-Id: I62e4a8610689e72944e1a9c020f13a47d402c136 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-04nehalem/raminit: clean up code and use MCHBAR macrosFelix Held
On a a timeless build with coreboot i386 crossgcc 6.3.0, this doesn't change the hash of the output binary. Change-Id: I15e09320e72cffb8a2617eca0cfe40780f74bece Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27707 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-04nehalem/raminit: remove REAL define and most dead codeFelix Held
The code only compiled when REAL was set to 1; the other case included an unpublished include. Change-Id: I7f31e9cd02f45492d6c9e88ec6164a537ca5e3c2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27706 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-04mb/pcengines/apu2: turn LED 2 and LED 3 off in final stageMichał Żygowski
Due to vendor's requirements LED 2 and LED 3 should be turned off in late boot process. Add appropriate functions to read and write GPIO status. Change-Id: Ia286ef7d02cfcefacf0e8d358847406efe1496fb Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/27729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-04mb/pcengines/apu2: change GPIO settingMichał Żygowski
Change GPIO setting to use IOMUX to refer to GPIO by IOMUX register as in BKDG for Family 16h Models 30h-3fh Processor Rev 3.06. Change-Id: Icf4a60acabe65cd7f9985bb3af8bd577764d4196 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/27665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-04drvs/intel/gma/acpi: Add methods to use MBOX3Patrick Rudolph
* Add Mailbox 3 driver * Request brightness change through Mailbox 3 * Return Ones on error or if unsupported * Mark existing code as legacy (still required if no GMA driver is running) * Call legacy code if Mailbox 3 is unsupported, on error or if gma driver isn't running Tested on Lenovo T430: * Brightness control still works * Brightness is the same on S3 resume Change-Id: I51554c819148336b204d28972cbf775a10c3fb8a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nathaniel Roach <nroach44@gmail.com> Reviewed-by: Nicola Corna <nicola@corna.info> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-03security/tpm: Improve TCPA log generationPhilipp Deppenwiese
* Make tcpa_log_init static and move init code into the tcpa_log_add_table_entry routine. * Add more checks for log initialization. * Fix minor issues Change-Id: I215d79eed7ad17c6ab87f0c4b14a282e519ef07d Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/27769 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-03gpio: Change gpio_baseX_value() function return types to unsignedJulius Werner
This patch changes the return type of gpio_base2_value() and related functions from int to uint32_t. This makes more sense now that board_id() and related functions (which are the primary use case) also return that type. It's unlikely that we'll ever read a strapping of 32 GPIOs in a row, but if we did, we'd probably want to treat it as unsigned. Change-Id: I8fb7e3a7c76cb886aed40d0ada1f545180e43117 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03southbridge/intel: Remove leftover TPM ACPI codePhilipp Deppenwiese
Remove ACPI code which isn't necessary anymore due to the LPC TPM ACPI generator. Change-Id: I2fae286d61ec7c1036d1a8fa800dc8d9603252e9 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/27767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03soc/amd/common: Remove PSPP override settingMarc Jones
For some reason the PSPP setting was being overwritten in the common code. Remove the setting and allow the oem customize function to make the setting. BUG=b:112020107 TEST= build test Change-Id: If7f4511a71f725fedd60d33552656850e50d955d Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-03mainboard: Add ASUS P8H61-M LXTristan Corrick
Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.5 with kernel 4.9. This code is based on the output of autoport. The file `data.vbt` matches the VBT in the latest version of the vendor firmware (version 4601). This board works well under coreboot. A list of what works and what doesn't can be found in the documentation part of this commit. To summarise: the only known issues are that S3 suspend/resume doesn't work, and that there is no automatic fan control via the super I/O. Change-Id: I2a0579f486d3a44de2dd927fa1e76b90c3b48f62 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03superio/nuvoton/nct6776/acpi: Add PS/2 mouse supportTristan Corrick
By defining SUPERIO_KBC_PS2M, ACPI code is added to show the PS/2 mouse. This has been tested on an ASUS P8H61-M LX with Linux 4.9.110 and 4.17.8. In each case, the PS/2 mouse works automatically, whereas it was not detected before. Change-Id: I7983f85b3fd23547950f1f75a81bbca63c63d52b Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03superio/acpi: Make _CRS methods Serialized, eliminating IASL remarksTristan Corrick
When compiling for the ASUS P8H61-M LX, IASL 20180531 emits the following remark: "Control Method should be made Serialized (due to creation of named objects within)". Making the appropriate methods Serialized eliminates these remarks. Change-Id: I8e95d9a00a629a2f904c79b78fac20810327ed37 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27796 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-03superio/nuvoton/nct6776/acpi: Add parallel port supportTristan Corrick
Exposing the parallel port via ACPI causes Linux to automatically detect the parallel port and load the appropriate modules. Tested on an ASUS P8H61-M LX with Linux 4.9.110 and 4.17.8. However, no parallel port device has been tested. Change-Id: I2529a074e24433d093ad0650a45c7b29238620f3 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03sandybridge/raminit_mrc: remove reference to report_platform_info()Matt DeVillier
Commit ef8c559e537ed10d8054ca6a72ca50e0531fde95 [nb/intel/sandybridge/report_platform: Move remaining code to sb folder] moved reporting code to the southbridge, but missed a reference in the non-default MRC raminit path (so testing missed it). Remove invalid reference to fix compilation error. Test: build google/link with MRC raminit option selected Change-Id: I270a95ac53fbc9f8792f375908cf91585261f6a1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-03superio/nuvoton/nct6776/acpi: Fix typo in commentsTristan Corrick
The constant used in the ACPI code is NCT6776_SHOW_KBC, so update the comments to reflect that. Change-Id: I9ba69384866088f84a516557d76864104a024968 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03cpu/x86/lapic/apic_timer.c: Compile the same code for all stagesArthur Heymans
timer_monotonic_get() was only compiled in a !__PRE_RAM__ environment. Clean up the code paths by employing CAR_GLOBAL for the global state which allows the same code to be used in all stages. Change-Id: I08fd1795508f76abdab1618585366bf9d06482ff Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27801 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-03mb/google/auron,cyan: Remove interrupt from devicetree LPC TPM chip driverMatt DeVillier
These boards require polling vs interrupts, so remove the IRQ definition to prevent it being added to the SSDT device entry. Test: Boot Linux on various auron and cyan variants, verify no error for 'TPM interrupt not working' present in kernel boot log. Change-Id: Ia1139389f075934d41e823ce5190011c90c7cc88 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-03soc/intel/cannonlake: Report Whiskey Lake infoLijian Zhao
According to #574725, report Whiskey Lake CPUID, MCH device ID and graphics device ID in bootblock stage. BUG=N/A TEST=Build and boot up whiskey lake rvp platform and check serial log to see proper CPU/MCH/GFX/PCH got recognized. Change-Id: I3fbc190e0520989d2fd4a9b3294e84d67e49b2cf Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/27756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2018-08-03soc/intel/coffeelake: Add initial coffeelake supportLijian Zhao
Add coffeelake config and include path to coffeelake fsp header files. BUG=N/A TEST=Using private mainboard file can boot up on coffeelake rvp platform. Change-Id: Ide180de32a9d1896bed85b9e093963721c3d6041 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/27468 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-03mb/google/poppy/variants/atlas: Apply correct AC/DC loadlinesGaggery Tsai
This patch applies correct AC/DC loadline settings for Atlas from VRTT report. BUG=b:111419622 BRANCH=None TEST=emerge-atlas coreboot chromeos-bootimage and use DbC to check the AC/DC loadline settgins. Change-Id: I6e85b885a6d3a1db9a980d12f3cfc036a771422a Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/27788 Reviewed-by: Caveh Jalali <caveh@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-02google/cheza: Deassert USB hub reset pinJulius Werner
This patch makes sure we deassert the USB hub reset pin so the hub will work with the next board revision that drops the external pull-up. (Actual USB support comes in a later patch.) Change-Id: I1efdc3594cfa3229891d42d445a21c1739170b79 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27790 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-02cheza: Add board ID, RAM code and SKU IDJulius Werner
This patch adds the required callbacks to read all strapping IDs on Cheza. Change-Id: I6437bbd03bdd00dfeedcafebabeb00b13588d052 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-02mb/lenovo/x1_carbon_gen1: add vbtAlexander Couzens
Extracted from live running Thinkpad x1 carbon gen1 with vendor firmware. Thanks to Igor Lee. Change-Id: Id59517d9040c98e67a42fbce537f42f6b0c6db2d Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: Igor Lee <getrun@gmail.com> Reviewed-on: https://review.coreboot.org/27782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-20 01:55:39 +0000