summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2018-10-12libpayload: arm64: Conform to new coreboot lib_helpers.h and assume EL2Julius Werner
This patch adds the new, faster architectural register accessors to libpayload that were already added to coreboot in CB:27881. It also hardcodes the assumption that coreboot payloads run at EL2, which has already been hardcoded in coreboot with CB:27880 (see rationale there). This means we can drop all the read_current/write_current stuff which added a lot of unnecessary helpers to check the current exception level. This patch breaks payloads that used read_current/write_current accessors, but it seems unlikely that many payloads deal with this stuff anyway, and it should be a trivial fix (just replace them with the respective _el2 versions). Also add accessors for a couple of more registers that are required to enable debug mode while I'm here. Change-Id: Ic9dfa48411f3805747613f03611f8a134a51cc46 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/29017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2018-10-12amd/stoneyridge: Fix PmControl register size in SMI handlerMarshall Dawson
The AMD implementation of this register is only 16 bits. Change the source accordingly. TEST=Suspend/Resume a Grunt several times Change-Id: Ib900468cc1c790fa7d57bb6faa91aee012173f7a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Rename CGPLL_CONFIG definitionsMarshall Dawson
Shorten the names in the MISC CGPLL_CONFIG, and make the formatting match the surrounding source. Change-Id: I71cf1ff6bd4bca7a25484b4da9388c17cfecc043 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Rename GppClkCntrl fieldsMarshall Dawson
Make the field names of the MISCx00 GPPClkCntrl more manageable by shortening their names. Make the definitions look more like the rest of the header file. Change-Id: I515cd664808e38851a7dbdba899df4fb9bbbcde6 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Rearrange southbridge.hMarshall Dawson
Group definitions so they're near others of the same type, e.g. PCI, AcpiMmio, etc. Change-Id: Ia6ef21431db0e758eba0ea043b54c036ec6235fe Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Remove dead GPIO definitionsMarshall Dawson
Delete definitions that are no longer used. Change-Id: I94c9c33f73c1a2d9308408e3e9ca526e876d6135 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Clarify XHCI_PM register definitionsMarshall Dawson
Change-Id: I1b44ffd7c0244b0408c3823d634a9b8d5038462f Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Fix SPI_CMD_TRIGGER coding styleMarshall Dawson
Make the whitespace match surrounding lines and remove unnecessary parentheses. Change-Id: I2ed02494ba69237c38af61317e435d9575cefe1c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Convert hex definitions to lower caseMarshall Dawson
Match the rest of the soc/stoneyridge source. Change-Id: I4531e6dad0362be73499647d9fc93c168b6f163e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-12amd/stoneyridge: Remove hudson register definitionsMarshall Dawson
Delete artifacts remaining from the original "hudson" and "yangtze" controller hub designs. Husdon devices had a configurable AcpiMmio base address, and a selection for I/O vs. MMIO decode. Modern products are fixed at 0xfed80000 in MMIO. Remove the flash control register definitions for the old generations. The manual reset register appears to not function as hudson. PMIO_DEBUG is named differently now, and not used, so remove its definition too. Change-Id: I6484bb2ca80b65318565dfee1a3368b121aea9de Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/29008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-10-11mb/google/poppy/var/nocturne: Provide override for ec eventinfoFurquan Shaikh
This change implements the callback to provide google_chromeec_event_info structure in nocturne variant and sets MKBP SCI based on board id. BUG=b:112366846,b:112112483,b:112111610 Change-Id: Ifcc10aefc8f450214bd64dfffaf8854ada43f323 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Enrico Granata <egranata@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-11mb/google/poppy: Allow variants to provide event info at runtimeFurquan Shaikh
This change adds a variant callback to read google_chromeec_event_info from variant at runtime to allow override of any events based on factors like board id. This callback is used in ramstage and smm to get google_chromeec_event_info structure for performing various actions like setting masks and logging wake events from EC. BUG=b:112366846,b:112112483,b:112111610 Change-Id: If89e904c92372530a0f555952f87702f068e0b03 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Enrico Granata <egranata@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-11ec/google/chromeec: Add support for querying ec board id in smm stageFurquan Shaikh
This change adds ec_boardid.c to smm stage, which is required to allow mainboards to query the ec to get board version in this stage. BUG=b:112366846,b:112112483,b:112111610 Change-Id: Iccbba96ebb94a12745a62cbfe3496f9e6f921e3d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Enrico Granata <egranata@chromium.org>
2018-10-11ec/google/chromeec: Get rid of __SMM__ guard for chromeec functionsFurquan Shaikh
There doesn't seem to be a reason why we would want to protect certain chromeec functions with __SMM__ guard. So, this change gets rid of it. If the functions remain unused, then they would be removed during linking. Change-Id: I8196406074b01fe8ea15173c55d45bb86384be1b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29006 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Enrico Granata <egranata@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-11src: Move common IA-32 MSRs to <cpu/x86/msr.h>Elyes HAOUAS
Use "cpu/x86/msr.h" for common IA-32 MSRs and correct IA-32 MSRs names. Change-Id: Ida7f2d608c55796abf9452f190a58802e498302d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28752 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-11src: Replace MSR addresses with macrosElyes HAOUAS
Change-Id: I849dd406f5ccc733d4957eaf1c774745782f531a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-10-11amd/stoneyridge: Indicate STAPM units in their nameRichard Spiegel
STAPM devicetree registers do not indicate the unit, which causes confusion. More importantly, the time was assumed to be in seconds when it's actually milliseconds. This caused early STAPM configurations to fail. BUG=b:117590953 TEST=Build grunt Change-Id: I2a7e3d43601992d1f7b02456913c763d940fe9ee Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29035 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-11mainboard/google/kahlee: Set PSPP setting to BalanceLowAkshu Agrawal
With correct stapm values audio issue is not observed with PsPPBalanceLow (Gen1 speed). BUG=b:117569918 TEST=audio playback multiple times Change-Id: Iaeae52b262b12622a6753432e3fc40bf5f0fd8e0 Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/29028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-10-11mb/google/kahlee: Set stapm parameters with time value fixedAkshu Agrawal
stapm_time passed to smu via agesa is in msec. With earlier value smu was getting stapm_time as 2.5 sec instead of 2500 sec and thus causing issue in S3, and audio in PsppBalanceLow state. BUG=b:117569918, b:117252463 TEST= 1.) audio works with PsppBalanceLow 2.) S3 cycles Change-Id: I673e7e673d042918dff47141f37bbca354f5c45c Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/29027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-10-11selfboot: remove bounce buffersRonald G. Minnich
Bounce buffers used to be used in those cases where the payload might overlap coreboot. Bounce buffers are a problem for rampayloads as they need malloc. They are also an artifact of our x86 past before we had relocatable ramstage; only x86, out of the 5 architectures we support, needs them; currently they only seem to matter on the following chipsets: src/northbridge/amd/amdfam10/Kconfig src/northbridge/amd/lx/Kconfig src/northbridge/via/vx900/Kconfig src/soc/intel/fsp_baytrail/Kconfig src/soc/intel/fsp_broadwell_de/Kconfig The first three are obsolete or at least could be changed to avoid the need to have bounce buffers. The last two should change to no longer need them. In any event they can be fixed or pegged to a release which supports them. For these five chipsets we change CONFIG_RAMBASE from 0x100000 (the value needed in 1999 for the 32-bit Linux kernel, the original ramstage) to 0xe00000 (14 Mib) which will put the non-relocatable x86 ramstage out of the way of any reasonable payload until we can get rid of it for good. 14 MiB was chosen after some discussion, but it does fit well: o Fits in the 16 MiB cacheable range coreboot sets up by default o Most small payloads are well under 14 MiB (even kernels!) o Most large payloads get loaded at 16 MiB (especially kernels!) With this change in place coreboot correctly still loads a bzImage payload. Werner reports that the 0xe00000 setting works on his broadwell systems. Change-Id: I602feb32f35e8af1d0dc4ea9f25464872c9b824c Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/28647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-11tegra124_lp0: make sure to build with compiler.h includedPatrick Georgi
Fixes builds of that binary in clean trees. Change-Id: If5a995449a74c00da836fcf22bda44ebc8197518 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-10-11commonlib/storage: Make pci sdhci code compile in romstageBora Guvendik
In romstage malloc is not available, so use CAR_GLOBAL variable instead. BUG=b:78106689 TEST=Boot to OS Change-Id: If9438d0b707c6ffaa61db80bd1d385112bc91cfc Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/25067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-11riscv: add physical memory protection (PMP) supportXiang Wang
These codes are written by me based on the privileged instruction set. I tested it by qemu/riscv-probe. Change-Id: I2e9e0c94e6518f63ade7680a3ce68bacfae219d4 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28569 Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-11soc/intel/common/block/gpio: check for NULL using if statementBora Guvendik
Remove assert() and instead use if statement to check if comm->groups is NULL. Found-by: klockwork BUG=None TEST=Boot to OS Change-Id: I85a6bc700b52d04c61ca8f2baac62000f40cf2cb Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/28940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-11mb/google/octopus: I2C clock tuning for meepWisley Chen
Tune I2C params for I2C buses 0, 5, 6, and 7 to ensure that the frequency does not exceed 400KHz. BUG=b:117298114 TEST=emerge-octopus coreboot chromeos-bootimage and measured frequency under 400 KHz Change-Id: Id608aae7edf54a24f364606dd7952521d1d67c1a Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/29021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-11mb/cavium/cn8100_sff_evb: Only expose two UARTsPatrick Rudolph
Only two UARTs are connected to the FTDI UART USB chip. Change-Id: Id5ae7266ce44c9f64c7f7aeaf23c49122041f47a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-10soc/intel/skylake: Set PCIEXPWAK_DIS if WAKE# pin is not enabledFurquan Shaikh
This change sets PCIEXPWAK_DIS in PM1_EN register if WAKE# pin is not enabled on the platform. This is required to prevent unnecessary wakes if the WAKE# pin remains not connected on the platform. Function to set PCIEXPWAK_DIS gets called in normal boot path (BS_PAYLOAD_LOAD) as well as S3 resume path (BS_OS_RESUME). BUG=b:117284700 TEST=Verified that no spurious wakes are observed on nocturne. Change-Id: Iea93baffc9bb703c0ffedacafc6a9a9410c7ebfe Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-10-10mb/google/octopus: Drop I2C bus 0 clock frequency for Phaserpeichao.wang
Need to tune I2C bus 0 clock frequency under the 400KHz since this bus attached the Stylus EMR pen and need meet the spec. Bug=b:117297214 TEST=flash coreboot to the DUT and measure I2C bus 0 clock frequency whether under 400KHz Change-Id: I06d9d25f52d7f641d937de0d6b7df3d7a076fbf9 Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28973 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-10lib: increase part number size in memory_info/dimm_infoAaron Durbin
The dimm_info and memory_info structs are used in devices that don't strictly use DIMMs. Those platforms have the DRAM soldered down so there's no DIMM part number that encapsulates the DRAMs used in the DIMM. The full part number is desired to be exposed in the SMBIOS tables. As such extend DIMM_INFO_PART_NUMBER_SIZE to 33 to accommodate longer part numbers 'MT53B256M32D1NP-053 WT:C' is one of the longer part numbers that are desired to be maintained. BUG=b:115697578 Change-Id: I0c39dd1d1c2f0776d70d8c4d8d56719779ff82ae Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/28978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-10soc/cavium: dynamic UART initialization for cavium cn8100Jens Drenhaus
Now only those UARTs that are enabled in devicetree.cb are initialized. Tested on Opencellular Elgon. Change-Id: I145c224148f0cc078bb1c76f588f603e73121a62 Signed-off-by: Jens Drenhaus <jens.drenhaus@9elements.com> Reviewed-on: https://review.coreboot.org/28975 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-10-10mb/google/poppy/variants/nami: Add samsung_dimm_K4AAG165WB-MCRC SPDChris Zhou
Add SPD file for sdp samsung_dimm_K4AAG165WB-MCRC (ram id: 9) BUG=b:112679174 TEST=emerge-nami coreboot chromeos-bootimage Change-Id: Iac1e3ca4b009cc9be94608cd342f535fa581a5eb Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28974 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-10mb/google/kahlee/variants/*/devicetree.cb: Reset I2C slavesRichard Spiegel
Use the new I2C slave reset function and reset all slaves connected to all 4 I2C. Do this in all boards. BUG=b:114479395 TEST=Added debug code. Build and boot grunt. Examined output, confirmed GPIO pins changing as required. Removed debug code. Change-Id: Ia78ee5d5319d3c1a7daa9c56c81d435999b3a359 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28575 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-10soc/amd/stoneyridge/gpio.c: Create I2C slave reset codeRichard Spiegel
AMD's SOC do not wait for I2C transactions to complete before executing a reset. Because of this, it's possible for the reset to happen in the middle of a transaction, resulting on a slave hang. There are 2 possible solutions: If the slave has a reset pin connected to a GPIO pin, it can be used to reset the slave, else the only solution is to bang SCL 9 times. Create code that makes it easy to implement SCL bang, using a devicetree register to define which I2C SCL lines needs to be reset. BUG=b:114479395 TEST=Build and boot grunt. Look at transactions on a scope. Change-Id: I7f74b7e45c509044825355874753969f074e2382 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28574 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-10mb/google/kahlee: Add delan variantMartin Roth
BUG=b:117173908 TEST=Build delan Change-Id: If149b8c43ff16637c38d5320eb606bb72d62e953 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/28972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-10-10mb/google/fizz: Prepare sharing directory for variantsDavid Wu
Clean up Kconfig file in order to support variants for fizz. Add BOARD_GOOGLE_BASEBOARD_FIZZ that can be set by various fizz variants to use the common baseboard configs. BUG=b:117066935 BRANCH=Fizz TEST=emerge-fizz coreboot Change-Id: I9c89f1dc526a9d623e1ae4d4b52a923489b389d3 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-10mediatek/mt8183: Init PLLs for DRAMTristan Shieh
Set up DRAM related PLLs. And update post divider table to fulfill all freqency settings. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: Ic197cef7d31f75ffe4e7d9e73c9cc544719943ab Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-on: https://review.coreboot.org/28667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2018-10-09soc/intel/cannonlake: Add PCIE ASL entrySubrata Banik
This patch creates _PRT entires for each PCIE root port devices. TEST=Able to see PCIE wake device in cat /proc/acpi/wake list Change-Id: I183c89c92139e15e0bfc39620710dbdc6597b351 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/cannonlake: Make correct IRQ mapping for CNL SA and PCH PCI devicesSubrata Banik
This patch provides option for PCI IRQ mapping in both PIC and APIC mode. TEST=Build and Boot on CNL RVP. Change-Id: Ie26750ac9dc2ce940b0c116085c041de439075df Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/common/acpi: Fix ACPI Namespace lookup failure, AE_ALREADY_EXISTS ↵Subrata Banik
issue This patch fixes below ACPI compilation issue: Found 1 external control methods, reparsing with new information Pass 1 parse of [DSDT] ACPI Error: [EPCS] Namespace lookup failure, AE_ALREADY_EXISTS (20160318/dsfield-660) ACPI Error: [EMNA] Namespace lookup failure, AE_ALREADY_EXISTS (20160318/dsfield-660) ACPI Error: [ELNG] Namespace lookup failure, AE_ALREADY_EXISTS (20160318/dsfield-660) Pass 2 parse of [DSDT] ACPI Warning: NsLookup: Type mismatch on EPCS (Integer), searching for (RegionField) (20160318/nsaccess-664) ACPI Warning: NsLookup: Type mismatch on EMNA (Integer), searching for (RegionField) (20160318/nsaccess-664) ACPI Warning: NsLookup: Type mismatch on ELNG (Integer), searching for (RegionField) (20160318/nsaccess-664) Parsing Deferred Opcodes (Methods/Buffers/Packages/Regions) TEST=Able to build sgx.asl without any ASL error. Change-Id: If4e7d4c66b6aab6c081fa272d8c2c9a1f0651ef7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/common/block/pcr: Add NULL pointer check in pcr_execute_sideband_msg()Subrata Banik
This patch to fix KW issue due to msg, data and response pointers NULL check fail. Change-Id: I39324514079f240ba1683a04e579de85485299bf Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/cannonlake: Disable Legacy PME for Root portsSubrata Banik
Legacy PME are enabled by default in FSP-S UPD. This policy sets PME Interrupt Enable (PIE) bit of RCTL register to trigger interrupt generation when RSTS.PS state has changed (either due to 0->1 transition or due to this bit being set with RSTS.PS already set). Due to this interrupt generation, system wakes from sleep immediately it enters. This patch overrides root port legacy pme upd policy from coreboot to ensure no false SCI is triggerd when system is in S3/S0ix state. BUG=b:113083354 BRANCH=none TEST=Able to make S3 resume using wake on wifi connect/disconnect usecase without any failure. Change-Id: I779fac711eeeed65ea379fad1cc400052d8a00eb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/cannonlake: Ensure FSP don't override ITSS IPCx registersSubrata Banik
This patch save and restore ITSS IPCx register before and after FSP-S call. Change-Id: Iea9356b4404d2fa49ea62ef7bc2c72f125054ff3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28792 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-09soc/intel/skylake: Ensure FSP don't override ITSS IPCx registersSubrata Banik
This patch save and restore ITSS IPCx register before and after FSP-S call. Change-Id: Ib731f27826d604c305dc52a8488fd6240b01148a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09soc/intel/common/pch: Select Kconfig for ITSS polarity configurationSubrata Banik
This patch selects Kconfig for Intel Core Platform in order to ensure proper ITSS IPCx programming. Change-Id: I81e75e17ceb23c364b78300c3950144be1580700 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-09mb/google/kahlee/variants/liara: Update H1/TP/TS i2c timingsChris Zhou
After adjustment on Liara EVT H1: 392.03 KHz TP: 397.87 KHz TS: 397.71 KHz BUG=b:116309237 BRANCH=master TEST=emerge-grunt coreboot chromeos-bootimage measure by scope Change-Id: Ib5d7ce09ac58f33ee826d7541e1a0d14a03add9a Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-08mainboard/google/kahlee: Set PSPP setting to BalancedHighAkshu Agrawal
Setting default PSPP setting to BalancedLow was causing audio playback issue in most of the units. With BalancedLow either there was no sound or noise on playback. Switching to BalancedHigh as default option. BUG=b:116553085, b:112020107 TEST=Test playback and hear proper audio. Change-Id: Ibf64d7b8e58e60ce931ddc85f11b135708cdb1ee Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/28967 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08Move compiler.h to commonlibNico Huber
Its spreading copies got out of sync. And as it is not a standard header but used in commonlib code, it belongs into commonlib. While we are at it, always include it via GCC's `-include` switch. Some Windows and BSD quirk handling went into the util copies. We always guard from redefinitions now to prevent further issues. Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-08soc/intel/skylake: Fix ‘dev’ pointer NULL before being dereferencedSubrata Banik
This patch fixes KW issue due to pointer being NULL and will be dereferenced Change-Id: Iedb59daf5f448e31c0097873a086e4d08cd4a979 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/28948 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08mb/google/octopus: Enable DRAM_PART_NUM_IN_CBI feature for BobbaPan Sheng-Liang
Enable DRAM_PART_NUM_IN_CBI feature to get DRAM part number from CBI and set DRAM_PART_IN_CBI_BOARD_ID_MIN to 3 for DVT. BUG=b:115697578 TEST=verified it in Bobba EVT board which rework ram id. Change-Id: I0fb457d8772f5038e5d90188d7682956ddfad46b Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28891 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08smmstore: Add a key/val store facility in flash, mediated through SMMPatrick Georgi
It exposes an interface that is as generic as possible, so payloads and/or kernels can use it for their data. Change-Id: I9553922f9dfa60b9d4b3576973ad4b84d3fe2fb5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/25182 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 09:36:44 +0000