coreboot - Some coreboot project code with my work

Age	Commit message (Expand)	Author
2013-07-10	arm/exynos: Correct SPI session commands.	Hung-Te Lin
2013-07-10	AMD: Kconfig cleanup	Kyösti Mälkki
2013-07-10	pit: update I2C4 speed constant	David Hendricks
2013-07-10	exynos5420: i2c: Fix error handling.	Gabe Black
2013-07-10	exynos5420: Clock the mmc blocks off of the mpll.	Gabe Black
2013-07-10	pit: Configure the pinmux for the i2c busses that are connected on pit.	Gabe Black
2013-07-10	exynos5420: use speed parameter in i2c_init() for HSI2C	David Hendricks
2013-07-10	exynos5420: Change some clock settings.	Gabe Black
2013-07-10	exynos5420: Fix the way the rate of the input clock for i2c buses is found.	Gabe Black
2013-07-10	snow: Add flush to UART driver.	Hung-Te Lin
2013-07-10	ec/chromeec: Merge upstream V3 structure and constant definition.	Hung-Te Lin
2013-07-10	Exynos5420: Initialize USB PHY	Stefan Reinauer
2013-07-10	Exynos5250: Initialize USB PHY	Stefan Reinauer
2013-07-10	Exynos: Only compile UART in if serial console is selected	Stefan Reinauer
2013-07-10	Don't try to use CBMEM console in bootblock	Stefan Reinauer
2013-07-10	Exynos5420: add code to make sure resume will work on DRAM.	Ronald G. Minnich
2013-07-10	ARMv7: Drop duplicate call to bootblock_cpu_init()	Stefan Reinauer
2013-07-10	Simplify early / bootblock console code	Stefan Reinauer
2013-07-10	ARM: Don't leave alignment checking on after the exception test.	Gabe Black
2013-07-10	pit: Replace the snow GPIO indexes with ones for pit.	Gabe Black
2013-07-10	pit: Remove the MAX_CPUS option.	Gabe Black
2013-07-10	pit: Stop compiling in the max77686 driver on pit.	Gabe Black
2013-07-10	pit: Stop calling tps65090 functions until we can call through the EC.	Gabe Black
2013-07-10	exynos5420: Switch to fixed size types in dmc.h.	Gabe Black
2013-07-10	exynos5420: Revamp the high speed I2C driver.	Gabe Black
2013-07-10	Samsung CPUs: Unify Kconfig	Stefan Reinauer
2013-07-10	arm: Fix memory barrier usage in IO operation	Hung-Te Lin
2013-07-10	exynos5420: update I2C code, add HSI2C/USI support	David Hendricks
2013-07-10	pit: set up the PMIC correctly	David Hendricks
2013-07-10	max77802: add header for max77802 PMIC	David Hendricks
2013-07-10	ARM: when setting a GPIO to put, set the value, then the direction	Ronald G. Minnich
2013-07-10	exynox5420: Remove the 5250 clock registers and fix the SPI frequency.	Gabe Black
2013-07-10	PIT: memory setup	Ronald G. Minnich
2013-07-10	exynos5420: add I2C8-10 to clock_get_periph_rate()	David Hendricks
2013-07-10	armv7a: Enable native memcpy / memset	Stefan Reinauer
2013-07-10	exynos5420: Implement support for the pinmux as functions.	Gabe Black
2013-07-10	exynos5250: De-switch-ify the pinmux configuration code.	Gabe Black
2013-07-10	ARM: Tell the linker memset and memcpy are functions.	Gabe Black
2013-07-10	ARM: Separate the early console (romstage) from the bootblock console.	Gabe Black
2013-07-10	google/pit: Don't spew output with GPIO config	Stefan Reinauer
2013-07-10	arch: clean up Kconfig and Makefile	Stefan Reinauer
2013-07-10	exynos5420: Clear the framebuffer before making it uncacheable	Stefan Reinauer
2013-07-10	exynos5420: Don't disable and re-enable the MMU when uncaching the framebuffer	Stefan Reinauer
2013-07-10	exynos5420: Simplify the graphics code by eliminating the unused color map	Stefan Reinauer
2013-07-10	exynos5420: Fix some problems with the clock management code.	Gabe Black
2013-07-10	armv7: Reserve space BL1 and checksum header by specifying bootblock offset.	Hung-Te Lin
2013-07-10	cpu: Add CPU microcode file to cbfs with 16-byte alignment	Aaron Durbin
2013-07-10	ec: Reserve correct ioport regions for Chrome OS EC to use	Bill Richardson
2013-07-10	google/snow: Don't spew output with GPIO config	Stefan Reinauer
2013-07-10	slippy/falco/peppy: Enable SERIRQ continuous mode	Duncan Laurie