summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2012-04-23Unbreak boards where chipset can select between FSB and serial APIC busRudolf Marek
Commit d4d5e4d3e10da06a83d57a147bd58a733381de18 contains #ifdef instead of #if, making the FSB/serial bus selection for APIC always select serial bus. The bug is harmless on most chipsets because the bit is often RO, but it breaks at least on VIA K8T890. Change-Id: I89c4855922199eca7f921c3e4eb500656544c8e5 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/921 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-22amd: Fix unused variable warningVikram Narayanan
Comment out the id variable which is used in a commented code block. Change-Id: Ib002d57e5314971f0589d04b7e451ab7d7079f53 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/913 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-21Makefile: define build result directoriesKyösti Mälkki
Final build results (.elf, .debug, .map) are to be placed under directory $(objcbfs), the default is: $(obj)/cbfs/$(CONFIG_CBFS_PREFIX)/ Intermediate build results (.o, .s, .S, .inc, .ld) that do not have a clear one-to-one relation to a file under src/ are to be placed under directory $(objgenerated), the default is: $(obj)/generated Also defines implicit rules for final build results: .debug -> .elf and .map .elf -> .bin Change-Id: I448c6b7c9a952e54170df42091d7db438025a795 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/858 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-21Intel e7505: build as separate object fileKyösti Mälkki
No longer include northbridge files directly in the source for mainboard romstage.c and fix includes. Also make required adjustments to function declarations. Change-Id: Iafdcc0766ed44c64cc628e5935eef2c6372f5f22 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/906 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-21Intel e7505: enable ECC scrubbingKyösti Mälkki
It takes about 3 seconds to scrub 8GiB DDR266 RAM. After ECC scrub XIP cache is disabled for system stability. There is very little to do in romstage after ECC scrub, especially when RAM debug messages are turned off. So the delay caused by this is hardly noticeable. Cache for complete ROM is re-enabled before ramstage is decompressed, and it has no unstability issues. So the code required to re-enable cache for ROM currently already exists in cache-as-ram_ht.inc. A Kconfig option HW_SCRUBBER enables the scrub to be run on hard reboots and power-ons. Change-Id: Icf27acf73240c06b58091f1229efc0f01cca3f85 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/905 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-21nvramtool: Unify nvramtool and build_opt_tblVikram Narayanan
As cmos.layout parsing capabilities are already there in nvramtool, use those than using build_opt_tbl.c. Add binary and header file generation in nvramtool. Make appropriate changes to Makefile.inc. Change-Id: Iaf3f5d4f51451aeb33c92800a0c895045f2388cf Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/898 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-20Refactor some alignment handlingPatrick Georgi
Made using coccinelle: @@ expression E; @@ -(E + 7) & -8 +ALIGN(E, 8) @@ expression E; @@ -(E + 15) & -16 +ALIGN(E, 16) Change-Id: I071d2c98cd95580d7de21d256c31b6368a3dc70b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/910 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-20Revert wbind added to the reset_vectorMarc Jones
This change reverts : Change Id I4fdb281b2b684ab5fea999aae28ca08dce24da4d The wbinvd (or invd) should not be needed at the reset vector. It causes problems with some CPUs AP init. If there is a problem with a specific CPU and it must be done at this location, it should be added conditionally. Change-Id: I85b71b0a07f039359a4fb889aaa05c75fff619be Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/908 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-19Intel e7505: refactor onlyKyösti Mälkki
Drop comments (from e7501 era) which no longer seem to apply with e7505. Write the semi-constant D0:F0 table as code. Some register settings seem to be in different order compared with vendor BIOS, and will be handled by follow-up patches. Split RCOMP register copy function in two parts. Drop some uses of inline and local_mdelay(). Change-Id: I8739d3b2bbad5861118e8b16ccea1dd86991204f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/896 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-19Fix the blank in acpi_tables.czbao
Hope no more blank issue is got from future copy-paste. Change-Id: I5eb50e8232e339e7039a15054606aaff6b7ebc52 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/907 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-19Do not produce temp s3.rom if the board doesn't need it.zbao
S3.rom is useless for all the other boards which don't use flash to save sleep/wakeup settings. AGESA-based boards other than persimmon haven't been validated the S3 resume. They don't need S3.rom yet. Change-Id: I12693e9556ca6f8e0d80b2ab2dca5c85bdb97685 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/902 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-19Fix messy code in ALIB creationzbao
Fix the copy-paste typo in ALIB table creation. ssdt is useless here. Change-Id: I250066eb5f755275f75c37789ce8760de35b046b Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/885 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-04-19Leverage the Pstate table created by AGESA.zbao
The name of processor created by AGESA is P00n, whose P is BLDCFG_PROCESSOR_SCOPE_NAME(is 'C' if it is undefined.) and n starts from 0. The dsdt should be aligned with that. This feature has only been tested on persimmon. The changes on all the other boards were propagated. Change-Id: I8c3fa4b94406d530d2bed8e9a1f42b433bbec3ec Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/884 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-04-19S3: Use old heap during normal bootzbao
During normal boot, the cbmem is uninitialized. So it is illegal to find the heap in cbmem. Change-Id: I8b5e1dbf1124819ed91693a86a6dbe41aea109e5 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/904 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-04-18Fix the blank in acpi_tables.czbao
Change-Id: I65d50616e49802b7bb13f02369c4898fa4a238a4 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/903 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-17Intel e7505: handlers for undocumented registersKyösti Mälkki
Makes the code a bit more readable, IMO. There is no clean way to implement this as the affected registers are undocumented. Seems ROMCC cannot handle the enum. Also any of my future changes would not be even abuild tested as there is no longer a board with ROMCC and this chipset. E7505 chipset is CAR only from now on. Change-Id: I0e2d8ba0c7ed7cce46d9eafb8d8badf04cf75f7a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/895 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-17kconfig: Improve 'General setup' menu docs.Uwe Hermann
- Add documentation for COMPILER_GCC, and COMPILER_LLVM_CLANG. - SCANBUILD_ENABLE, CCACHE: Amend documentation. - SCANBUILD_REPORT_LOCATION: Document default dir, names of scan-build dirs. - INCLUDE_CONFIG_FILE: Add more verbose docs, show how to use it. - Fix typos/cosmetics/indentation, improve wording on some items. Change-Id: I6b67b2c777868e4421405caaffe6631e69dddad2 Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://review.coreboot.org/893 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-17More portable s3 scratch space creationPatrick Georgi
echo -n isn't portable. echo -e isn't portable. that bash loop isn't portable. So let's try something else. Change-Id: Ie73aa1c09d90c11a5c4952a332d4c2058390b5db Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/889 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-16S3 code in the mainboard.zbao
Persimmon is the demo board. Tested by Linux and Windows 7. Change-Id: I5ded942b51e63ebeb08ace0b202b4ed239b0c14c Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/624 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-04-16S3 code in coreboot public folder.zbao
1. Move the Stack to high memory. 2. Restore the MTRR before Coreboot jump to the wakeup vector. Change-Id: I9872e02fcd7eed98e7f630aa29ece810ac32d55a Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/623 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-04-16ACPI HEST table.zbao
HEST feature starts from ACPI 4.0. HEST is one of four kinds of tables of ACPI Platform Error Interfaces (APEI). In Windows world, APEI is called Windows Hardware Error Architecture (WHEA). APEI consists of four separate tables: 1. Error Record Serialization Table (ERST) 2. BOOT Error Record Table (BERT) 3. Hardware Error Source Table (HEST) 4. Error Injection Table (EINJ) All these 4 tables have the same header as FADT, MADT, etc. They are pointed by RSDP. For the HEST, it contains the error source. The types of them are defined as type description 1. Machine Check Exception (MCE) 2. Corrected Machine Check (CMC) 3. NMI Error 6. PCI Express Root Port AER 7. PCI Express Device AER 8. PCI Express Bridge AER 9. Generic Hardware Error Source Error source types 3, 4, and 5 are reserved for legacy reasons and must not be used. Currently AMD board only provide part of "Machine Check Exception (MCE)" & Corrected Machine Check (CMC)". we need to provide the header of each error source. Other types of Error Sources is in TODO list. Only persimmon is tested. Linux can add HEST feature. The dmesg says, ACPI: HEST 0000000066fe5010 00198 (v03 CORE COREBOOT 00000000 CORE 00000000) ...... HEST: Table parsing has been initialized. No more message is got. Windows can boot with this patch. Havent found a way to test it. Change-Id: I447e7f57b8e8f0433a145a43d0710910afabf00f Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/888 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-04-15cmos.layout: Remove invalid warningVikram Narayanan
"This file must be in UNIX format" is not valid anymore. Change-Id: I86169b12e7db159c1d3f380b0434874e9b6f5274 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/899 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-13Bifferboard: Fix MAINBOARD_PART_NUMBER.Uwe Hermann
Change-Id: I4acbeee8a0d26fae220ac22940b6f924e19af19c Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://review.coreboot.org/894 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-04-12Convert AOpen DXPL Plus mainboard to CARKyösti Mälkki
Tested on real hardware, mainboard with dual Xeon P4 HT CPUs requires cache-as-ram init code with AP SIPI protocol. Also enable 2nd CPU and PATA and clean-up Kconfig and ACPI. Change-Id: I415482f3af22df79d82492c49aed83549f29aa56 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/886 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-12Add support for aligned allocationRon Minnich
Add a memalign function and have malloc use it. Also, change the default alignment for malloc to u64-aligned. Change-Id: I0788637008f5cb5ac801d8bbdc430ca992c98e81 Signed-off-by: Ron Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/887 Tested-by: build bot (Jenkins) Reviewed-by: Mathias Krause <minipli@googlemail.com>
2012-04-12S3 code in vendorcode folder.zbao
Change the ExecuteFinalHltInstruction to assembly code. so we can make sure the code can run stackless. Change-Id: I783ced6cf7c5bc29c12a37aef29077e610d8957d Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-12Add Southbridge support for S3.zbao
1. Add some CIMX call for S3. 2. Detect sleep type. Change-Id: I62888e8d8a03987ca88f5c935fa660f6b49a4fe9 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/621 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-12Unify IO APIC address specificationPatrick Georgi
Some places still hardcoded the address instead of using IO_APIC_ADDR. Change-Id: I3941c1ff62972ce56a5bc466eab7134f901773d3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/677 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-11Intel e7505: cleanupsKyösti Mälkki
Fix delay loop comments. Time waited and the comments did not match in the origin (e7501), so delays currently "just work". Move reset detection to main raminit and don't use generic sdram_initialize for now, as there are local debug functions I need to use. Fix AOpen respectively. Disable ecc scrub, until I have it fixed for cache-as-ram use. Change-Id: I0529297f43c565d30b5fb7d1836700278ac029c4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/883 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-11Intel e7505: renames onlyKyösti Mälkki
Drop maybe-prefix in registers and tables. Have a name in place of PCI_DEV(x,y,z) to avoid confusion. Change-Id: I88f51b50d7fd83294aa14455a83418630e1bab85 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/882 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-11Remove obsolete empy macro definitionRon Minnich
In the early days of v2 the (e.g.) #ifdef SMP style was frowned upon in some quarters. Hence, empty definitions of functions were created. This particular function, possibly the last remaining example, was no longer even being used anywhere. Signed-off-by: Ron Minnich <rminnich@gmail.com>
2012-04-08Actually return %ebx value from cpuid_ebx()Jonathan A. Kollasch
Change-Id: I75f8f942950cad94439a10e389490ecfdd9272fe Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/880 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-06Remove Dell s1850Ron Minnich
It's almost 10 years old. It never worked. It's a soldered in FLASH, so mistakes are fatal. It's got no redeeming features. Remove the dell directory. In 12 years of trying to work with Dell we have not had much interest. It's misleading to have it there. Change-Id: I83ff009bd7a6d5289229ca39608789ae5c33710b Reviewed-on: http://review.coreboot.org/876 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-06Add support for SMSC MEC1308/1310 SuperI/O ECStefan Reinauer
Change-Id: If7921a66bab35f72c8455d5f0befc32a514ab417 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/825 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-06Add initial support for SMSC SIO1007 SuperI/O chipStefan Reinauer
early_serial and some ACPI needed for compilation Change-Id: I5dd970676488697156e0630392884f31149ac85b Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/824 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-06Add support for SMSC LPC47N207 SuperI/O chipStefan Reinauer
This includes only early serial support for now. Change-Id: I9a2a439e1d17a989428033fdb4a4b813553dab6d Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/823 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-06Fixes and Sandybridge support for lapic cpu initStefan Reinauer
- preprocessor macros should not use defined(CONFIG_*) but just CONFIG_* - drop AMD CPU model 14XXX config variable use. Those do not exist. - skip some delays on Sandybridge systems - Count how long we're waiting for each AP to stop - Skip speedstep specific CPU entries Change-Id: I13db384ba4e28acbe7f0f8c9cd169954b39f167d Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/871 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2012-04-06Fix support for RAM-less multi-processor initKyösti Mälkki
Fix regression after commit: 7dfe32c5408916b6cb23f1ec48e473e1c728d300 Only align 16-bit entry on platforms that really require it, indicated by selecting SIPI_VECTOR_IN_ROM in CPU Kconfig. Disable assertion test of AP_SIPI_VECTOR for platforms not depending on this feature. Build of romstage should be fixed to get the vector address from bootblock build automatically. Change-Id: Ide470833c0254df1a9ff708369ab1c095ccfb98d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/875 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-06Add Sandybridge/Cougar Point support to SMM relocation handlerStefan Reinauer
Previously this part of smmrelocate.S had to be omitted because the CONFIG_ options for those components did not exist yet. Add them back. Change-Id: I6ac94ca804e03062724401a08d1d174adac5e830 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/874 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2012-04-06Cache 8MB flash instead of 4MBStefan Reinauer
Also fix the MTRR check to use the total_mtrrs variable instead of a hardcoded 8. Change-Id: I2c5ceb3910cd949f43ecf5b8aff857d6ffe0b1a5 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/873 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-06Factor out function to find driver for a CPUStefan Reinauer
This function can be used outside of the normal CPU setup Change-Id: I810c63b8aff868a6f69d5b992bea1cfae5a5996b Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/868 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-06Add constants for fast path resume copyingStefan Reinauer
cache as ram does not usually cache the ram before it is up. Hence, if romstage.c backs up resume memory, the involved memcpy is always uncached. This makes resume very slow. On Sandybridge we copy the memory later, after enabling caching, and that allows us to resume in as little as 250ms. Change-Id: I31a71ad4468679d39880cf9a8c4e497bb7addf8f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/872 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-04-05Fix timer frequency detection on SandybridgeStefan Reinauer
Change-Id: Ide720bd91cde56a0afdd231d93500c371b1ffbe8 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/870 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-04-05amdfam10: add phenom II as known cpuBernhard Urban
Change-Id: I84a0f9e8e7a15c0aac8dc380de3ddf70b1decbd7 Signed-off-by: Bernhard Urban <lewurm@gmail.com> Reviewed-on: http://review.coreboot.org/864 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-05Invalidate cache before first jumpStefan Reinauer
Some CPUs (Sandybridge) seem to require this, and it does not hurt on other CPUs. Change-Id: I4fdb281b2b684ab5fea999aae28ca08dce24da4d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/869 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-04-05smbios: Don't fill out firmware version on ChromeOSStefan Reinauer
In ChromeOS we potentially have different payloads with different versions. Since the user land tools get information on which one of them is loaded, leave the string in smbios empty so we can fill it out in the payload. Also fill out system version number and serial number with some constant values. Change-Id: Id1fed5a54b511c730975fa83347452f1274b8504 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/867 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-04-05Fill out ChromeOS specific coreboot table extensionsStefan Reinauer
ChromeOS uses two extensions to the coreboot table: - ChromeOS specific GPIO description for onboard switches - position of verified boot area in nvram Change-Id: I8c389feec54c00faf2770aafbfd2223ac9da1362 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/866 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-05Update documentation in smmrelocate.S to mention TSEGStefan Reinauer
Change-Id: I392f5fc475b15b458fc015e176e45888e7de27fb Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/861 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-05Add support for Intel Sandybridge CPUStefan Reinauer
Change-Id: I9f37e291c00c0640c6600d8fdd6dcc13c3e5b8d5 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/855 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-05Add support for Intel Sandybridge CPU (northbridge part)Stefan Reinauer
Change-Id: I06228ecf9cac931ad34e32871d5a4f2a4857b2ac Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/854 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-05 02:04:06 +0000