summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2015-04-22chromeec: Access ID + flags through ACPI I/O portsShawn Nematbakhsh
If CONFIG_EC_GOOGLE_CHROMEEC_ACPI_MEMMAP is set, access to memmap data should go through the ACPI CMD / DATA ports. BUG=chrome-os-partner:38224 TEST=Manual on Samus. Define EC_GOOGLE_CHROMEEC_ACPI_MEMMAP. Verify system boots cleanly. BRANCH=None Change-Id: I9d19704df259f5a25e04a9b07b23968e93fe6302 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d0b59b040a7889d2d1bd6eeaf57dd960bd29927d Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: I405e28828457a1fd83a7ece7192a7e7d0a37be95 Original-Reviewed-on: https://chromium-review.googlesource.com/262932 Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/9893 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22lib: add base64 decoderVadim Bendebury
It became necessary to decode base64 data retrieved from VPD and convert it into binary for inclusion in the device tree. The patch introduces the decoder function based on the description found in http://en.wikipedia.org/wiki/Base64. An open source implementation from http://base64.sourceforge.net was considered, in the end the only thing borrowed from it is the table to translate base64 ascii characters into numbers in 0..63 range. BRANCH=none BUG=chromium:450169 TEST=created a test harness generating random contents of random size (in 8 to 32766 bytes range), then converting the contents into base64 using the Linux utility, and then converting it back to binary using this function and comparing the results. It succeeded 1700 iterations before it was stopped. Change-Id: I502f2c9494c99ba95ece37a7220c0c70c4755be2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6609f76e1559d3cdd402276055c99e0de7da27c8 Original-Change-Id: I5ed68af3a4daead50c44ae0f0c63d836f4b66851 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/262945 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9892 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22google/veyron_*: Increase SPI flash frequency to 24.75MHzJulius Werner
This patch increases the SPI clock for the ROM to 24.75MHz on all rk3288 (veyron) boards. This increases flash read speeds (and thereby decreases boot time) significantly, but we don't seem to get any more increases by going even higher. We have also seen occasional read failures at higher speeds in certain configurations, so this frequency seems to be the best option. BRANCH=veyron BUG=chrome-os-partner:38352 TEST=Booted on Jerry with Servo attached. Change-Id: I9bdb62eff169fe2be33558caafe9891668589372 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a1d07da4266f2922b076dfae8396c24c6a84252b Original-Change-Id: If3fd96c8cb5648d12fc4ee56fb6b6d5f3a0bf720 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/262645 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9889 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22google/urara: use board ID information to set up hardwareIonela Voinescu
The hardware initialization is now split in basic initialization (MIPS and system PLL, system clock, SPIM, UART), and initialization of other hardware blocks (USB, I2C, ETH). The second part uses board ID information to select setup that is board specific (currently only I2C interface is selected through board ID). BRANCH=none BUG=chrome-os-partner:37593 TEST=tested on bring up board for both Urara and Concerto; to simulate the use of Concerto (I2C3) DIP SW17 was set to 0. it works with default settings on Urara Change-Id: Ic5bbf28ab42545a4fb2aa6fd30592a02ecc15cb5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f2b3db2e7f9fa898214f974ca34ea427196d2e4e Original-Change-Id: Iac9a082ad84444af1d9d9785a2d0cc3205140d15 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/257401 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9888 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22rockchip/rk3288: Fix SPI clock divisor calculationJulius Werner
The code to calculate the RK3288 SPI controller's internal clock divisor is wrong: it assumes that the divisor register was an "n-1" divisor when it actually isn't (due to some misleading kernel code that was copied in here). This means that all SPI clocks are currently running lower than expected. This patch fixes the calculation and changes all callers such that the effective speeds stay the same. BRANCH=veyron BUG=chrome-os-partner:38352 TEST=Booted Jerry with and without the patch, dumping the divisor for flash and EC clocks. Made sure it stays the same. Change-Id: I2336e2b81c2384b5076175fcf32717a3ab2ba0c5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1fd5b990f937019a9bee7bd693c91d6e2fca1adb Original-Change-Id: I094d57a5933c8b849f5c66194e6cc2952ab68b90 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/262269 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9887 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22chromeec: Support accessing memmap data over port 62/66Shawn Nematbakhsh
Some platforms cannot access the 900h-9ffh region over the LPC bus, so it's necessary to access memmap data over the ACPI cmd / data ports. BUG=chrome-os-partner:38224 TEST=Manual on Samus. Define EC_GOOGLE_CHROMEEC_ACPI_MEMMAP. Verify system boots cleanly and battery status is updated immediately on plug / unplug. BRANCH=None Change-Id: Ifbed938668d3770750a44105e40fccb9babf62ed Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 14762261a6a32b2e96ee835e852b2c9537436ae3 Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Change-Id: Idb516ff60b973d8833a41c45eac5765dafb8ec6d Original-Reviewed-on: https://chromium-review.googlesource.com/262314 Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> Reviewed-on: http://review.coreboot.org/9886 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22chromeec: Update ec_commands.h from EC repositoryShawn Nematbakhsh
BUG=chrome-os-partner:38224 TEST=Compile for Samus BRANCH=None Change-Id: I9bb7ed100b876cbd50d39f5c5ad599e4bd7be6b4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ca8fbf8ed91d95486f0c8db680e8ceabca597a3a Original-Change-Id: I250fcce67f6103cf3037b416b8e74dd4a2cea780 Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/262313 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/9885 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22arch/arm64: allow floating-point registers accessYen Lin
BRANCH=None BUG=None TEST=build coreboot, make sure there are fmov instructions generated by the compiler, and boot to kernel Change-Id: Ia99c710be77d5baec7a743a726257ef3ec782635 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f770a436a0692c8e57a8c80860a180330b71e82c Original-Change-Id: Iab4ba979b483d19fe92b8a75d9b881a57985eed7 Original-Signed-off-by: Yen Lin <yelin@nvidia.com> Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/262242 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9884 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22google/rush_ryu: add serialno from vpdStephen Barber
Add the serial number from VPD on ryu. BRANCH=none BUG=chrome-os-partner:37813 TEST=devicetree is populated with "compatible", "hardware", and "serialno" properties Change-Id: I1e84933a01a34028a062d31aad026f91c3bd29e1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 18cefb655651c9097ff7f2ef3cb735efbbe32370 Original-Change-Id: I14439c37df0fde7f2328c7caae1adf6a122e8f5f Original-Signed-off-by: Stephen Barber <smbarber@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/260646 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9883 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22vpd: populate coreboot table with serialnoStephen Barber
BRANCH=none BUG=chrome-os-partner:37813 TEST=devicetree is populated with with "compatible", "hardware", and "serialno" properties Change-Id: Ibe84aa05702d2a33456c6c33d15a4c7d4a6d45d7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 61408d969f5d6e1e40f919b3defd5f1622391c9e Original-Change-Id: I02f360f4e5385042f56eb2b2f29072e393a24fc9 Original-Signed-off-by: Stephen Barber <smbarber@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/259141 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9882 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22vboot2: provide config option to clear dev mode state on recoveryVadim Bendebury
On embedded devices with limited input capabilities it is necessary to clear the developer mode condition when entering recovery. The new configuration option will enable such behavior using the new vboot2 flag. CQ-DEPEND=CL:261630 BRANCH=storm BUG=chrome-os-partner:36059 TEST=with the rest of the patches applies observed desired behavior on SP5 Change-Id: I99c3d1330bea9980a2af3b9fd99e29ab96f2cf07 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4c0a6315d6b4ede8d43e736ee6c82f1023f4716d Original-Change-Id: I8e4a521e574b53a670daf692f7b45dc21635f272 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/261620 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9878 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22vboot2: ignore physical dev switch in case virtual mode is configuredVadim Bendebury
It is better to explicitly disable the call to read the physical switch setting than to leave it up to implementation. In fact no implementation would be even required. BRANCH=none BUG=none TEST=verified that storm works as expected Change-Id: I4b39827dba34ec0124960d0634e45d4554252d9b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c9fd014f1bfec6570b20ed8fed16d14d7e4e11b9 Original-Change-Id: I5d6d223f0c684e105a5e3d0b407e0fb181c7a7df Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/261588 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9876 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22google/veyron_*: add ELPIDA F8132A3MA and FA232A2MA sdramjinkun.hong
BRANCH=None TEST=Boot from veyron BUG=None Change-Id: Ie154d233f144bde2625cf069b9b754e9518a1768 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0ddd03f8757b5122f6ca87baffdf95c46e356e53 Original-Change-Id: I725cfb04ff46f7e6493e0e12a464c45b1362bc1a Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/261083 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9874 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22arm64: provide icache_invalidate_all()Aaron Durbin
In order to not duplicate the instruction cache invalidation sequence provide a common routine to perform the necessary actions. Also, use it in the appropriate places. BUG=None BRANCH=None TEST=Built on ryu. Change-Id: I29ea2371d034c0193949ebb10beb840e7215281a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d5ab28b5d73c03adcdc0fd4e530b39a7a8989dae Original-Change-Id: I8d5f648c995534294e3222e2dc2091a075dd6beb Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/260949 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9871 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22elog: Eliminate CONFIG_ELOG_FULL_THRESHOLD and CONFIG_ELOG_SHRINK_SIZESol Boucher
These Kconfig options provided a level of configurability that is almost never necessary, so they are being moved into ordinary preprocessor defines in elog_internal.h. The new threshold to trigger shrinking is relative to the number of additional (maximum-size) events that can fit, and the new target post-shrink size is a percentage of the total ELOG area size. BUG=chromium:467820 TEST=Add loop at the end of elog_init() that fills the ELOG area to just below full_threshold with dummy events. Observe successful shrinkage when the next event is logged. BRANCH=None Change-Id: I414c4955a2d819d112ae4f0c7d3571576f732336 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ce439361e3954a2bf5186292f96936329171cf56 Original-Change-Id: I926097f86262888dcdd47d73fba474bb2e19856a Original-Signed-off-by: Sol Boucher <solb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/260501 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/9869 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22google/veyron_*: update sdram-ddr3-samsung-4GB.incjinkun.hong
The old parameters are wrong. K4B8G1646Q: rank = 2, row = 15 is right. BUG=None TEST=Boot from veyron BRANCH=None Change-Id: I41848c158f3ea028035cc8c0d969a4a449390a54 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 601ba06c636ff0f0779e6ef9357b53060a1ec19b Original-Change-Id: I5bc6798890b3ba0f5134d048ae6bbf2bfd696676 Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/260483 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Tested-by: Paul Ma <magf@bitland.com.cn> Reviewed-on: http://review.coreboot.org/9866 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22rockchip/rk3288: use bl_en instead lcd_bl to fill_lb_gpiohuang lin
in depthcharge we will use "backlight" gpio which in lb_gpio table to control backlight, we use lcd_bl before, but it will not meet the backlight power sequence, so we change it to bl_en. BUG=chrome-os-partner:37348 TEST=Boot from speedy, and backlight work well BRANCH=None Change-Id: I19e488c7d3f1fe5cb91f8a93fae6b848f58b36b7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cb594ce612e1cedeabced4531fbd954f3698da98 Original-Change-Id: Ib0dac7c48bce7d0b28ec287b32d8c5bad575893f Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/259900 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9864 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22vboot: when configured, pass the wipeout request to vbootVadim Bendebury
It has become necessary to be able to "factory reset" certain devices on firmware request. The vboot package has been modified to provide the necessary API, this patch introduces a configuration option and uses the API when enabled. CQ-DEPEND=CL:259857 BRANCH=storm BUG=chrome-os-partner:37219 TEST=with all the patches applied, on storm, holding the recovery button at startup for 10 seconds, causes 'crossystem wipeout_request' to report '1'. Change-Id: I5e57bc05af3753f451626021ba30c7726badb7b4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f70e03e9a8c55bf3c45b075ae4fecfd25da4f446 Original-Change-Id: I4c2192da4fabfdef34d527e5b80d137634eb6987 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/259843 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9862 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22qualcomm/ipq806x: report versions of RPM and DDR init componentsVadim Bendebury
DDR init blob version string can be found at a fixed location in memory once the blob is loaded. Maximum size of the string is 48 bytes. The RPM RW version is defined in a 32 bit version stored at yet another fixed address once RPM RW has started. BRANCH=storm BUG=chrome-os-partner:30623 TEST=ran this command on the booted system: localhost ~ # egrep '(DDR|RPM)' /sys/firmware/log Loaded DDR init blob version 99ce41d@-AAABANAZA DDR initialized Starting RPM Started RPM version 1.0.128 localhost ~ # Change-Id: If3c3c8368845b978605ccfda7e09c21ae2e5ab9a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 328c9c57cf93110bc0fdd267134d72e386d70834 Original-Change-Id: If411f6f7bca53ea20390b7e851cb3d120681eade Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/256738 Original-Reviewed-by: Varadarajan Narayanan <varada@qti.qualcomm.com> Reviewed-on: http://review.coreboot.org/9860 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22qualcomm/ipq806x: add board id value for SP5Vadim Bendebury
SP5 whirlwind is the earliest hardware version equipped with the LED ring. BRANCH=storm BUG=chrome-os-partner:36059 TEST=none Change-Id: I4c90a75911350bafd8ccb8755b2491e9447f285b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3dfee90457295668a2b60d5a1e913caf52557877 Original-Change-Id: I6bffdcc47fe9c72796e3bac44d211f907538ef0b Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/258270 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9857 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22google/urara: retrieve board ID from a CBFS fileVadim Bendebury
Concerto board does not have the means of detecting the identity of the device it is controlling. But it is very beneficial to be able to use the same firmware image on Concerto boards running different devices. The suggested solution is to keep the device identity as a string in a raw CBFS file called 'board_id'. With this patch coreboot maintains a table of possible board name strings and their matching board IDs. BRANCH=none BUG=chrome-os-partner:37593 TEST=verified that without the board id file addition the default Board ID of zero is used. Adding the file as follows: echo -n 'concerto' > /tmp/bid cbfstool /build/urara/firmware/image.serial.bin add -f /tmp/bid \ -t raw -n 'board_id' results in firmware reporting board ID setting of 1. board_id: failed to locate CBFS file board_id board_id: name urara, ID 0 Change-Id: I5a02192740dc94b1ea8090092cc325fe0ac42aa6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f41f9b07f155f0c719c36e0cd93081205624557e Original-Change-Id: I8341782005b101be78f5c9a6b375c8f73179c1ad Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/257170 Reviewed-on: http://review.coreboot.org/9856 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22broadcom/cygnus: add timestamps in pre-ram stagesDaisuke Nojiri
BUG=none BRANCH=broadcom-firmware TEST=timestamp table: 0501: 31858 0005: 106680 0503: 132098 0504: 135573 0006: 168656 0013: 168660 0014: 240487 0502: 240491 0001: 240515 0002: 247544 0003: 537158 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://chrome-internal-review.googlesource.com/204758 Reviewed-by: Julius Werner <jwerner@chromium.org> Commit-Queue: Daisuke Nojiri <dnojiri@google.com> Tested-by: Daisuke Nojiri <dnojiri@google.com> Change-Id: I5b4608152e97d53e35d28aa7bed2bfd158409df9 Reviewed-on: https://chromium-review.googlesource.com/256418 Reviewed-on: http://review.coreboot.org/9855 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22google/purin: add DMA coherent regionDaisuke Nojiri
BUG=none BRANCH=broadcom-firmware TEST=boot to depthcharge Change-Id: Id10437c12e219e07121395abd442d53b3b56c7be Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f33e9218ca8df1d149761c09253c30837b607433 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chrome-internal-review.googlesource.com/204757 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com> Original-Tested-by: Daisuke Nojiri <dnojiri@google.com> Original-Change-Id: I93def9c326cc8b4fea69078987bddf09d9f2a797 Original-Reviewed-on: https://chromium-review.googlesource.com/256417 Reviewed-on: http://review.coreboot.org/9854 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-22broadcom/cygnus: Initialize dram in romstage.Icarus Chau
BUG=chrome-os-partner:36456 BRANCH=broadcom-firmware TEST=When enable configuration CYGNUS_SDRAM_TEST_DDR, print on console: sdram initialization is completed. test ddr start from 0x60000000 to 0x80000000 ... test ddr end: fail=0 Translation table is @ 02004000 Mapping address range [0x00000000:0x00000000) as uncached Change-Id: I88dc2f0c504e2a152133edd442c3d776dd73d37e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 376471751d6980f99bbe47faad193c79a05fa69f Original-Signed-off-by: Icarus Chau <ichau@broadcom.com> Original-Reviewed-on: https://chrome-internal-review.googlesource.com/199775 Original-Commit-Queue: <ichau@broadcom.com> Original-Tested-by: <ichau@broadcom.com> Original-Reviewed-by: Scott Branden <sbranden@broadcom.com> Original-Change-Id: I47bc5d9ec147cc8bfbd893e8c0d7e5fc5e401771 Original-Reviewed-on: https://chromium-review.googlesource.com/256416 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: http://review.coreboot.org/9853 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21broadcom/cygnus: Fix missing writel->write32 transformationPatrick Georgi
cygnus' serial driver wasn't part of the tree when the big transformation was done, so follow up. Change-Id: Ic1a53bea9bcaf1e568b50b9c2ad7782e65e36328 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9852 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21cygnus: add QSPI driverCorneliu Doban
The driver uses the MSPI controller to read/write to/from SPI flash BUG=chrome-os-partner:35811 BRANCH=boradcom-firmware TEST=bootblock loads and executes verstage Change-Id: I34c7882170e4f89bee1b6001563c09b16dfea8ca Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8c3b156019df429e9d12728224ed4eec8436f415 Original-Signed-off-by: Corneliu Doban <cdoban@broadcom.com> Original-Reviewed-on: https://chrome-internal-review.googlesource.com/199776 Original-Reviewed-by: Scott Branden <sbranden@broadcom.com> Original-Tested-by: Corneliu Doban <cdoban@broadcom.com> Original-Commit-Queue: Corneliu Doban <cdoban@broadcom.com> Original-Change-Id: Ice798ec76011ee47e13174b4c5534b0d0bc8b4ad Original-Reviewed-on: https://chromium-review.googlesource.com/256414 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: http://review.coreboot.org/9849 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21veyron: add new SDRAM configuration with ram-code 1101bZhengShunQian
This add hynix-2GB SDRAM(H5TC4G63AFR-PBA), whose timing is the same as H5TC4G63CFR-PBA, to veyron boards. BUG=None BRANCH=veyron TEST=build on mighty and boot on mighty board with ram-id reworked Change-Id: I3ae5e65e60e18414cf4de6fbcc5bed736b1492de Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b22029f9b05ebb9a775266a7e3aae38b50c1883a Original-Change-Id: If17fb002f2816990e1706833b37ac6be345e540b Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/256307 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Lin Huang <hl@rock-chips.com> Original-Tested-by: Lin Huang <hl@rock-chips.com> Reviewed-on: http://review.coreboot.org/9848 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21pistachio: Remove 50% DDR bandwidth restrictionIonela Voinescu
The existing DDR setup configures the burst length to be 8. However the DDR controller can only be given sufficient data per clock to satisfy a burst length of 4, hence the bursts are only half populated. This results in a 50% drop of efficiency. Fix this by configuring the burst size to 4. BUG=chrome-os-partner:31438, chrome-os-partner:37087 TEST=tested on Pistachio bring up board -> DDR initialized properly and ramstage executed correctly BRANCH=none Change-Id: I761ba73a04688841ca39a370b7cb99b6e0b22964 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0e590ab8387dbbccef45dc84d1eeafee2abc9e2e Original-Change-Id: I585385b65e330624ad70292349e50c6695eeeb6c Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/256305 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9847 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21pistachio: Decrease DDR ODT from 75R to 50RIonela Voinescu
The DDR On Die Termination was incorrectly configured at 75R, where as the data sheet suggests for DDR2-800 it should be set to 50R. Correct this by adjusting the ODT setting in the EMR register. BUG=chrome-os-partner:31438, chrome-os-partner:37087 TEST=tested on Pistachio bring up board -> DDR initialized properly and ramstage executed correctly BRANCH=none Change-Id: I2f0242c422b1cb3d1f64ce3dd17b62fef5e7e155 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ac081ac59c0dc3d16a7b540cd379fb870b6cfe40 Original-Change-Id: If7951812033c4e88f4be3c143fb49526eddba142 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/256304 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9846 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21pistachio: clean DDR2 initialization codeIonela Voinescu
The proper way to initialize DDR2 is for the PHY to automatically establish precise timing configuration through the training process. The alternative (used initially for testing) is no longer needed. This change determined the removal of some local variables as they ended up being used in one location only. BUG=chrome-os-partner:31438, chrome-os-partner:37087 TEST=tested on Pistachio bring up board -> DDR initialized properly and ramstage executed correctly. BRANCH=none Change-Id: I31e9a8975d176a04061f9c84fe06cce850bb53b9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e28f3ef9a22436bb0fa949df6f5a5c6a67002dfd Original-Change-Id: Ifb9c1bb6e0b71af72340381bd2349850d1b4af2d Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/256303 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9845 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21storm: print uber-sbl informationVadim Bendebury
Process information reported by uber-sbl: print out its version and RPM and KRAIT log contents. BRANCH=storm BUG=chrome-os-partner:30623 TEST=rebooted a storm device, checked out /sys/firmware/log after booting up Chrome OS: localhost ~ # head -29 /sys/firmware/log | tail -15 Uber-sbl version: @vbendeb-AAABANAZA Section 0 log: 0 :00:SBL1, Start 0 :00:SBL-RO Krait 2623 :00:SBL-RO Krait 0 :00:BB 4666 :00:BB 0 :00:sbl1_hw_init, Start 6130 :00:sbl1_hw_init, Delta 0 :00:SBL1, End 15372:00:SBL1, Delta Section 1 log: 0 :00:SBL-RO Krait, Start 0 :00:SBL-RO Krait, End 336 :00:SBL-RO Krait, Delta localhost ~ # Change-Id: I524dbb49f676046a43bfba26b31b2834c8d2769c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: dcabca6eb87dcead0c9c33749ed76ac939d843c1 Original-Change-Id: Ic037f936ff2d09b0346fb5239094e7928dfd7620 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/252830 Original-Reviewed-by: Varadarajan Narayanan <varada@qti.qualcomm.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@gmail.com> Reviewed-on: http://review.coreboot.org/9843 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21armv7: preserve bootblock invocation parameterVadim Bendebury
Some platforms may pass as a parameter the maskrom or vendor startup code information when calling the bootblock. Make sure the bootblock startup code saves this parameter for use by coreboot. As we don't want to touch memory before caches are initialized, save the passed in parameter in r10 for the duration of cache initialization. Added warning comments to help enforcing that cache initialization code does not touch r10. BRANCH=storm BUG=chrome-os-partner:30623 TEST=with the rest of the patches applied see the QCA uber-sbl report in the coreboot console output. Change-Id: Ic6a09e8c3cf13ac4f2d12ee91c7ab41bc9aa95da Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e41584f769eb042604883275b0d0bdfbf5b0d358 Original-Change-Id: I517a79dc95040326f46f0b80ee4e74bdddde8bf4 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/255144 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@gmail.com> Reviewed-on: http://review.coreboot.org/9842 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21ipq808x: add uber sbl parameter definitionsVadim Bendebury
This describes the structure of the information passed through a pointer by uber-sbl to be processed by the coreboot bootblock. BRANCH=storm BUG=chrome-os-partner:30623 TEST=with the rest of the patches applied observed uber-sbl information added to the coreboot console log. Change-Id: If04c4ee0ccfda3df45bd22eb576aaa5b51f1c4b5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ed39e2bcd793fd490416b407f627b5a9a86b8f78 Original-Change-Id: I1dffbf4559853a818e81ca5fdeff013cf008dd6a Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/255143 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@gmail.com> Reviewed-on: http://review.coreboot.org/9841 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21urara: I2C clock and MFIO setup function for all interfacesIonela Voinescu
The I2C MFIO setup function now supports all interfaces. Also, the API for the clock setup function changed to support all interfaces. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; all I2C interfaces were tested with the TPM and they all work properly. BRANCH=none Change-Id: I6dfd1c4647335878402cabb2ae512d6e3737a433 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f8a7ffb54e3f5092c9844b9b502949d3cfc053d1 Original-Change-Id: Ibd67c07acf3d1d9c594faa8ced5ab56d9abb2e40 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/256362 Original-Reviewed-by: Chris Lane <chris.lane@frontier-silicon.com> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9840 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21pistachio: add clock setup for all I2C interfacesIonela Voinescu
BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; all I2C interfaces were tested with the TPM and they all work properly. BRANCH=none Change-Id: I02202585140beb818212c02800f6b7e4966a922a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 33b2adecc4939ac73fffba47adf1c8306a888b8d Original-Change-Id: Ida7eaa72d4d6e6b034319086410de5baa63788bc Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/256361 Original-Reviewed-by: Chris Lane <chris.lane@frontier-silicon.com> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9839 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21Unify byte order macros and clrsetbitsJulius Werner
This patch removes quite a bit of code duplication between cpu_to_le32() and clrsetbits_le32() style macros on the different architectures. This also syncs those macros back up to the new write32(a, v) style IO accessor macros that are now used on ARM and ARM64. CQ-DEPEND=CL:254862 BRANCH=none BUG=chromium:444723 TEST=Compiled Cosmos, Daisy, Blaze, Falco, Pinky, Pit, Rambi, Ryu, Storm and Urara. Booted on Jerry. Tried to compare binary images... unfortunately something about the new macro notation makes the compiler evaluate it more efficiently (not recalculating the address between the read and the write), so this was of limited value. Change-Id: If8ab62912c952d68a67a0f71e82b038732cd1317 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fd43bf446581bfb84bec4f2ebb56b5de95971c3b Original-Change-Id: I7d301b5bb5ac0db7f5ff39e3adc2b28a1f402a72 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254866 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9838 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21arm(64): Manually clean up the mess left by write32() transitionJulius Werner
This patch is a manual cleanup of all the rubble left by coccinelle waltzing through our code base. It's generally not very good with line breaks and sometimes even eats comments, so this patch is my best attempt at putting it all back together. Also finally remove those hated writel()-style macros from the headers. BRANCH=none BUG=chromium:444723 TEST=None (depends on next patch) Change-Id: Id572f69c420c35577701feb154faa5aaf79cd13e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 817402a80ab77083728b55aed74b3b4202ba7f1d Original-Change-Id: I3b0dcd6fe09fc4e3b83ee491625d6dced98e3047 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254865 Reviewed-on: http://review.coreboot.org/9837 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21arm(64): Globally replace writel(v, a) with write32(a, v)Julius Werner
This patch is a raw application of the following spatch to src/: @@ expression A, V; @@ - writel(V, A) + write32(A, V) @@ expression A, V; @@ - writew(V, A) + write16(A, V) @@ expression A, V; @@ - writeb(V, A) + write8(A, V) @@ expression A; @@ - readl(A) + read32(A) @@ expression A; @@ - readb(A) + read8(A) BRANCH=none BUG=chromium:444723 TEST=None (depends on next patch) Change-Id: I5dd96490c85ee2bcbc669f08bc6fff0ecc0f9e27 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 64f643da95d85954c4d4ea91c34a5c69b9b08eb6 Original-Change-Id: I366a2eb5b3a0df2279ebcce572fe814894791c42 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254864 Reviewed-on: http://review.coreboot.org/9836 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21arm(64): Change write32() argument order to match x86Julius Werner
This patch changes the argument order for the (now temporarily unused) write32() accessor macro (and equivalents for other lengths) from (value, address) to (address, value) in order to conform with the equivalent on x86. Also removes one remaining use of write32() on ARM that slipped through since coccinelle doesn't inspect header files. BRANCH=none BUG=chromium:444723 TEST=Compiled Cosmos, Daisy, Blaze, Pit, Ryu, Storm and Pinky. Change-Id: Id5739b144f6a5cfd40958ea68510dcf0b89fbfa9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f02cae8b04f2042530bafc91346d11bb666aa42d Original-Change-Id: Ia91c2c19d8444e853a2fc12590a52c2b6447a1b9 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254863 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9835 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21arm(64): Replace write32() and friends with writel()Julius Werner
This patch is a raw application of the following spatch to the directories src/arch/arm(64)?, src/mainboard/<arm(64)-board>, src/soc/<arm(64)-soc> and src/drivers/gic: @@ expression A, V; @@ - write32(V, A) + writel(V, A) @@ expression A, V; @@ - write16(V, A) + writew(V, A) @@ expression A, V; @@ - write8(V, A) + writeb(V, A) This replaces all uses of write{32,16,8}() with write{l,w,b}() which is currently equivalent and much more common. This is a preparatory step that will allow us to easier flip them all at once to the new write32(a,v) model. BRANCH=none BUG=chromium:451388 TEST=Compiled Cosmos, Daisy, Blaze, Pit, Ryu, Storm and Pinky. Change-Id: I16016cd77780e7cadbabe7d8aa7ab465b95b8f09 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 93f0ada19b429b4e30d67335b4e61d0f43597b24 Original-Change-Id: I1ac01c67efef4656607663253ed298ff4d0ef89d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254862 Reviewed-on: http://review.coreboot.org/9834 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21romstage_handoff: Fix for changing CBMEM structureDuncan Laurie
Adding a new field to a CBMEM structure does not work if there are systems with older RO that do not have this new field as it means romstage did not prepare the field and ramstage is using it uninitialized. To deal with this instead of adding a new field split the existing s3_resume variable into bytes, using the first byte for the existing s3_resume variable (which is always just 0 or 1) and the second byte for the new varible, which will always be 0 for the old RO and can be set by new RO. BUG=chrome-os-partner:37108 BRANCH=samus TEST=manual testing on samus: 1) ensure that if vboot requests reboot after TPM setup that it still works and the reboot happens after reference code execution. 2) ensure that if RO is older without this change that it does not cause a continuous reboot if newer ramstage is added 3) test that suspend resume still works as expected Reviewed-on: https://chromium-review.googlesource.com/253550 Reviewed-by: Alec Berg <alecaberg@chromium.org> Reviewed-by: Shawn N <shawnn@chromium.org> (cherry picked from commit 1ccb7ee5fc6980ca0f26fa52b385d2cc52f396c9) Change-Id: I6e206b4a3b33b8a31d102d64bd37d34657cf49ac Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fe85678ee788ff939bc8c084829a1b04232c4c6c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Change-Id: If69d0ff9cc3bf596eee8c3a8d6e04951820a26fe Original-Reviewed-on: https://chromium-review.googlesource.com/256114 Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/9833 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21veyron_{brain,danger}: Specify vboot romstage and ramstage indicesDavid Hendricks
This applies the same hack to Danger and Brain as on Rialto which allows us to remove the EC-related sections from their respective flashmaps. BUG=none BRANCH=veyron CQ-DEPEND=CL:255669 TEST=built and booted on Brain w/ depthcharge and mosys changes, was able to read vbnv data from userspace Change-Id: I95715d59a21cd081ac4a3a2216576ede5620f1a5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4de4273be9ac80ca77a34bc076d1f265fbb94e9f Original-Change-Id: I6c2041e8c17ab157599255a505aaef5e2447a241 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/255780 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21rk3288: disable rk808 DCDC_UV_ACT_REG restart converter functionhuang lin
if DCDC_UV_ACT_REG setted, when the buck voltage drop to 85%, rk808 will reset this buck, but now when the current consumption large, rk808 may miscarriage of justice this status, so we must disable this function BUG=chrome-os-partner:34834 TEST=Boot from jerry, and do RUNIN test sucess BRANCH=None Change-Id: I08cef73b88d6c2722b389c632c7db29605f4545d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 858c8abc11a824fc3d991a39a49710243f4b1473 Original-Change-Id: I46ebe332c576eebd3386b5042b146a8b57a5c194 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/254496 Original-Commit-Queue: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9831 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21veyron: The ODT function is disabled for LPDDR3jinkun.hong
We found that we should better keep ODT off for LPDDR3 on our boards. BRANCH=veyron BUG=chrome-os-partner:37346 TEST=Boot veyron_speedy normal Change-Id: Id158c88769cf7ed1a5127cd09bad679a2f5e6a01 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0d85725a6faedb5bdbe8731991c225c31f138599 Original-Change-Id: Iebb8e74706756508dd56b85ad87baad48893c619 Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com> Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/255381 Reviewed-on: http://review.coreboot.org/9830 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21veyron: Sync up SDRAM configurationsJulius Werner
This patch adds all SDRAM configurations currently in use for any Veyron board to all boards. In the future we might decide that we want to reuse known good memory from one board on another, and having all of these in there already might help us avoid a firmware rev. We can still differentiate them later if the need ever arises. Not touching Rialto since it already decided to go its own way and replace an existing RAM code with it's own 1GB configuration. Also adjusting the names of the recently added DDR3 4GB configs to fit the existing scheme. Includes changes from "veyron: The ODT function is disabled LPDDR3". BRANCH=veyron BUG=None TEST=Compiled all Veyron boards, booted on Jerry. Change-Id: I817efd4b467a5a9587475a82df207048173e7bd5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 36d3fe138b154a16700e3c7adbb33834ff1c5284 Original-Change-Id: I4d037967dcb5cbd6b2b82f347f6b19541559b61a Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/255665 Reviewed-on: http://review.coreboot.org/9829 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21rockchip: configure lpddr odt properlyDerek Basehore
The wrong offsets were being used for the GRF_SOC_CON2 register. This also configures odt based on the value of odt in the sdram_params for lpddr systems. BUG=chrome-os-partner:37346 TEST=boot veyron_speedy and veyron_jerry BRANCH=None Change-Id: I13ec3d0df162fe73fabf8af40dd5472e15d6f6af Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 403ab13de17290dc3766bd6f1a03b6effbe58b41 Original-Change-Id: Ic0c18cc7ccf861ef8749e6c950fab9a2802e5f26 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/255584 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9828 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21cbfs: Print absolute offsets of loaded filesVadim Bendebury
Add the absolute offset value to the CBFS log, to make it easier to understand which particular CBFS section the file is loaded from. BRANCH=storm BUG=none TEST=rebooted a Whirlwind device, observed an empty line before the ramstage section of the log and absolute offsets reported by CBFS. Change-Id: Ifcb79ab386629446b98625a5416dfa5850a105f6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ecc4d1df7c51a263230c45ecac5981d53bdd44b1 Original-Change-Id: I5cc727127374d6e55b8ff6f45b250ef97125a8ec Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/255120 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9827 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21veyron_jerry: support K4B8G1646Q-4GB and H5TC8G63XXX-4GB ddr3jinkun.hong
add the K4B8G1646Q-4GB and H5TC8G63XXX-4GB ddr3 inf file, and use ram_id 1110 correspond to K4B8G1646Q-4GB ddr3 use ram_id 1111 correspond to H5TC8G63XXX-4GB ddr3 BUG=None TEST=Boot veyron_jerry normal BRANCH=None Change-Id: I3398516a9f2c2e44c9f5d08d0a3ab6e76b5c6f5f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b8dfc455bb93c2daf567e3b6e39c0a715e44311c Original-Change-Id: I90250cb84eb140f93c4fc655fb3b90584dd515c0 Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/255010 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9826 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21x86: Allow builds without ACPI tablesLee Leahy
Fix build bug that is referencing vboot_data from vendorcode/google/chromeos/gnvs.c when CONFIG_HAVE_ACPI_TABLES is not set. BRANCH=none BUG=None TEST=Build and run on Glados 1. Checkout updated patches for config, skylake and glados through FspNotify1 2. Verify that mainboard/intel/glados/Kconfig does not select HAVE_ACPI_TABLES 3. emerge-glados coreboot 4. Test passes if build completes successfully Change-Id: Ida5ab8b8dafe30b11dc80dab935e3223d4c760d3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1908079360aa065a36956d487eb93142e9c012a1 Original-Change-Id: Icac3845f7e2d1ddffa5f787a640033fba286c13e Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/254360 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/9825 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21ipq806x: i2c: stop transfer as soon as an error is reportedSourabh Banerjee
I2c transfer may consist of multiple segments (for instance write segment to set the register address and then a read segment to read the register value). Transfer should be stopped as soon as a segment processing error has been reported. BRANCH=master BUG=chrome-os-partner:35328 TEST=transfer shall not process the read segment when the write segment fails Change-Id: I85b7b59b376ce33ba3f6d2526be86e9f6585d97b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 50cd4d40851b3cea99183c549c47b4486a3deb4a Original-Change-Id: Id65f995d860dd670b289fbdd9eb0ca19a50d7007 Original-Signed-off-by: Sourabh Banerjee <sbanerje@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254494 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9824 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 15:47:32 +0000