summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Expand)Author
2015-01-04AMD Mainboards - platform_cfg.h: Fixes for doxygenMartin Roth
2015-01-04smihandler.c: Fix doxygen errors in southbridge_smi_handlerMartin Roth
2015-01-04atomic.h: Fix doxygen errorsMartin Roth
2015-01-04remove vx900_int16 doxygen module/groupMartin Roth
2015-01-04superio/smsc/lpc47b272/superio.c: Remove dead codeEdward O'Callaghan
2015-01-04src/superio/smsc/lpc47m10x/superio.c: Remove dead codeEdward O'Callaghan
2015-01-04superio/smsc/lpc47b272: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/smsc/lpc47m10x: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/smsc/lpc47b397: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/nsc/pc87417: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/nsc/pc87366: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/nsc/pc97317: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/intel/i3100: Use link-time symbol over .c includesEdward O'Callaghan
2015-01-04superio/nsc/pc87360: Use link-time symbol over .c includesEdward O'Callaghan
2015-01-04mainboard: Sanitize some superio include paths to be non-localEdward O'Callaghan
2015-01-04ipq806x: Fix casting in cbmem_top() so >=2GB can be usedDavid Hendricks
2015-01-04ipq806x: move GPIO definitions to the proper include fileVadim Bendebury
2015-01-04ipq806x: move translation table out of the wayVadim Bendebury
2015-01-04ipq806x: Add USB supportJulius Werner
2015-01-04nyan_big: Update Hynix BCTs and add Kingston 2GB BCT.Tom Warren
2015-01-04tegra124: configure DP with correct pixel clockVince Hsu
2015-01-04arm: lpae: Set XN and PXN bits for noncacheable regionsJimmy Zhang
2015-01-04nyan: Ignore the recovery GPIO.Todd Broch
2015-01-04samus: Minor fixes for P1.9 boardsDuncan Laurie
2015-01-04wtm2: Fix issues with USB in firmwareDuncan Laurie
2015-01-04samus: Enable DDI2 hotplugDuncan Laurie
2015-01-04samus: Update for board revision 1.9Duncan Laurie
2015-01-04samus: Move SPD related information to spd directoryDuncan Laurie
2015-01-04wtm2: Convert to use soc/intel/broadwellDuncan Laurie
2015-01-03intel/model_206ax: update microcodeNicolas Reinecke
2015-01-03ipq806x: clean up UART driver tx_byte functionVadim Bendebury
2015-01-03ARM64: Always has DYNAMIC_CBMEMKyösti Mälkki
2015-01-03ARMv7: Always has DYNAMIC_CBMEMKyösti Mälkki
2015-01-03storm: Put the page table at a correct addressVadim Bendebury
2015-01-03storm: modify memory layoutVadim Bendebury
2015-01-03mainboard/storm: setup mmu in storm mainboard_initDeepa Dinamani
2015-01-03soc/ipq806x : Add CONFIG_TTB_BUFFER for the soc.Deepa Dinamani
2015-01-03ipq8064: add SOC initialization skeletonVadim Bendebury
2015-01-03storm: enable early consoleVadim Bendebury
2015-01-03storm/ipq8064: add dynamic CBMEM supportVadim Bendebury
2015-01-03ipq8064: Configure storm bootblock to runVadim Bendebury
2015-01-03lenovo/t420s: Add new port.Nicolas Reinecke
2015-01-03blaze: change ramcode 1000/1001/1010 to use 792MHz bctNeil Chen
2015-01-03storm: ipq8064: enable CBFS SPI wrapperVadim Bendebury
2015-01-03ipq8084: provide monotonic us timerVadim Bendebury
2015-01-03arm: Fix stored PC value when handling exceptionsJulius Werner
2015-01-03elog: Add function to log boot reason in ChromeOS caseDavid Hendricks
2015-01-02allwinner/a10: Always has DYNAMIC_CBMEMKyösti Mälkki
2015-01-02Allow RISCV to be compiled with ANY_TOOLCHAINRonald G. Minnich
2015-01-01soc/riscv: Fix typo in src/soc/ucb/Makefile.inc.Ronald G. Minnich