index
:
coreboot
2560p
820g2
autoport-hsw
broadwell_refcode
e6230
e7240_bdw
haswell-mrc
hp820g1
hp9480m
mec1322
Some coreboot project code with my work
vimacs
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
src
Age
Commit message (
Expand
)
Author
2011-02-01
Add support for the Lenovo PMH7 embedded controller
Sven Schnelle
2011-01-31
Fix an infinite loop in pnp_get_ioresource(), which freezes coreboot if
Stefan Reinauer
2011-01-31
Add PCI ID's for VIA K8T800 and K8M800 northbridges.
Alexandru Gagniuc
2011-01-31
Build failure because of src/pc80/mc146818rtc_early.c unused variable
Stefan Reinauer
2011-01-30
Replace special rules for auxiliary files by cbfs-files-y entries
Patrick Georgi
2011-01-30
Inverse two arguments of cbfs-files-y and adapts its users (one of which alre...
Patrick Georgi
2011-01-29
Pass all required toolchain parts to SeaBIOS correctly
Stefan Reinauer
2011-01-28
Attached patch fixes the LPC decode ranges of SB700. We enable early only Ser...
Rudolf Marek
2011-01-28
This patch gets usbdebug console working in romstage.
Stefan Reinauer
2011-01-28
rename CONFIG_SERIAL_POST to CONFIG_CONSOLE_POST
Stefan Reinauer
2011-01-28
Fix Bimini build
Stefan Reinauer
2011-01-28
rk886ex lacked EC_ACPI
Stefan Reinauer
2011-01-27
Only add EC code if EC is selected in Kconfig
Stefan Reinauer
2011-01-27
Add new ec subdir for Embedded Controllers and common ACPI EC support
Sven Schnelle
2011-01-27
SMM code on i945 platforms needs udelay()
Peter Stuge
2011-01-27
Add a new CMOS variable which triggers activation of the
Patrick Georgi
2011-01-27
Trivial. Re-indent the code.
Zheng Bao
2011-01-27
Set the phy via weak function.
Zheng Bao
2011-01-27
oops. this is weird. CAR addresses should be specified in the socket and not in
Stefan Reinauer
2011-01-25
Set the SB800 SATA PHY correctly.
Zheng Bao
2011-01-24
This patch fixes an 'write_tables: coreboot table didn't fit (f0221)' issue.
Josef Kellermann
2011-01-24
Change fadt revision back to 3.
Zheng Bao
2011-01-21
... And fix the other compile time issues in cmos_layout.bin support
Patrick Georgi
2011-01-21
Make YABEL warnings-are-errors safe
Patrick Georgi
2011-01-21
Typo. s,CMOS_COMPONENT,CBFS_COMPONENT,.
Patrick Georgi
2011-01-21
Now bimini can boot linux to login.
Zheng Bao
2011-01-21
push ts5300 rom size to 1MB. In fact the flash part on that
Stefan Reinauer
2011-01-20
Remove the code for debugging.
Zheng Bao
2011-01-20
S3 feanture of SB800. Compiliant with SB700.
Zheng Bao
2011-01-20
Move some board specific functions to sb800.h.
Zheng Bao
2011-01-20
Features of Bimini board:
Zheng Bao
2011-01-20
This sb800 code is derived from sb700.
Zheng Bao
2011-01-20
For Cx, each ChipSel need to be sent MR command.
Zheng Bao
2011-01-19
Add a GX2 Kconfig option to choose the framebuffer size.
Nils Jacobs
2011-01-19
Revert r5902 to make code more readable again. At least three people like to
Stefan Reinauer
2011-01-19
Now that the VIA code is run above 1Meg (like other boards), it should
Kevin O'Connor
2011-01-19
The cn700.c code references mainboard_interrupt_handlers() which isn't
Kevin O'Connor
2011-01-18
Report if cmos_layout.bin can't be found when it should.
Patrick Georgi
2011-01-18
Move option table (cmos.layout's binary representation)
Patrick Georgi
2011-01-18
remove the code which is not ready to release.
Zheng Bao
2011-01-18
remove the code which is not ready to release.
Zheng Bao
2011-01-18
remove the code which is not ready to release.
Zheng Bao
2011-01-18
remove the code which is not ready to release.
Zheng Bao
2011-01-17
The code is tested on my board with register DIMMs. More tests need to be
Zheng Bao
2011-01-16
Ooops lets see if this extra comment removal fixes this.
Rudolf Marek
2011-01-16
Trivial, cleanup of GPIO comments.
Rudolf Marek
2011-01-14
Disable CMOS recovery code for ROMCC boards as the CBFS code used for
Patrick Georgi
2011-01-14
Improved GPIO setup for roda/rk886ex, and some documentation
Patrick Georgi
2011-01-14
Allow coreboot to initialize CMOS if checksum is invalid.
Patrick Georgi
2011-01-13
Default to CRT on Kontron/986lcd-m. "default display" doesn't always
Patrick Georgi
[next]