summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2017-01-24rockchip/rk3399: set edp pclk to 25MHzLin Huang
It may cause an edp aux transfer error if the edp pclk is set too high, so reduce it to 25MHz. BUG=chrome-os-partner:60130 BRANCH=None TEST=Build and Boot Change-Id: Id1063baa5a82637b03c0f1f754181df074ab17cc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8f7ce31a7483e765ae0c86f8e62ef51413ee1596 Original-Change-Id: Ibb86c12c1d7c00dc3b4cc7a6bdf3bd6e895cd9f3 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/429410 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18178 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-23google/pyro: Update DPTF settingsKevin Chiu
1. Update DPTF CPU/TSR1 passive trigger points. CPU passive point: 80 TSR1 passive point: 46 2. Update DPTF TRT Sample Period TSR1: 8s BUG=chrome-os-partner:62133 BRANCH=reef TEST=emerge-pyro coreboot Change-Id: I8fcf750ac17b8894ed3c8704eec62f5071d9cf24 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/18174 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-22gru: kevin: define GPIOs used on both platformsVadim Bendebury
The same GPIOs are used on both platforms, definitions are added an a new .h to make it easier to re-use them across the code. BRANCH=none BUG=chrome-os-partner:51537 TEST=panel backlight still enabled on Gru as before. The rest of the GPIOs are used in the upcoming patches. Change-Id: I54ef3e8dd79670bdb037baeec91430113d11bcc1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c58788026f28af52c650da0159b93d97269ca4a9 Original-Change-Id: I1a6c5b5beb82ffcc5fea397e8e9ec2f183f4a7e0 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/346219 Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-on: https://review.coreboot.org/18176 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-22nb/x4x/raminit: Fix programming dram timingsArthur Heymans
The results were obtained by comparing the MCHBAR registers of vendor bios with coreboot at the same dram timings. This fixes 2 issues: * 1333MHz fsb CPUs were limited to 667MHz ddr2 speeds, because with 800MHz raminit failed; * 1067MHz fsb CPUs did not boot when second dimm slot was populated. TESTED on ga-g41m-es2l on 800, 1067 and 1333MHz CPUs with DDR2 667 and 800MHz dimms. Change-Id: I70f554f97b44947c2c78713b4d73a47c06d7ba60 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18022 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-22mainboard/google/reef: Increase TSR1 trigger pointTim Chen
Update the DPTF parameters based on thermal test result. (ZHT_DPTF_EVT2_v0.4_20170120.xlsx) 1. Update DPTF TSR1 passive trigger point. TSR1 passive point: 46 BUG=chrome-os-partner:60038 BRANCH=master TEST=build and boot on electro dut Change-Id: If35e4cf2dbf7c506534c52a052598f6204d5315a Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/18183 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-22google/eve: Fixes for devicetree settingsDuncan Laurie
The devicetree settings were incorrect in a few places with respect to the SOC and board design: - IMVP8 VR workaround is for MP2939 and not MP2949 on Eve - IccMax values are incorrect according to KBL-Y EDS - USB2[6] is incorrectly labeled - I2C touch devices do not need probed as they are not optional - PCIe Root Port 5 should be enabled - I2C5 device should not be enabled as it is unused BUG=chrome-os-partner:58666 TEST=manually tested on Eve board Change-Id: I74e092444ead4b40c6d8091b80a691d44e2c6c7d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18200 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-22google/eve: Enable separate recovery MRC cacheDuncan Laurie
In order to get quick boot speeds into recovery enable the feature that allows for a separate recovery MRC cache. This requires shuffling the FMAP around a bit in order to provide another region for the recovery MRC cache. To make that shuffling easier, group the RW components into another sub-region so it can use relative addresses. BUG=chrome-os-partner:58666 TEST=manual testing on eve: check that recovery uses the MRC cache, and that normal mode does too. Check that if cache is retrained in recovery mode it is also retrained in normal mode. Also check that events show up in the log when retrain happens. Change-Id: I6a9507eb0b919b3af2752e2499904cc62509c06a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18199 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-22soc/intel/skylake: Include I2C code in romstageDuncan Laurie
The lpss_i2c driver is enabled in romstage, so the SOC needs to export the pre-ram compatible I2C controller info, which for skylake is in the bootblock/i2c.c file. This was not causing a compiler error in normal use, but when adding I2C debug code in romstage it failed to compile. With this added, I can now do I2C transactions in romstage. Change-Id: I0778b0497d0b6936df47c29b2ce942c8d90cf39b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18198 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-22google/eve: Enable keyboard backlight in bootblockDuncan Laurie
Enable the keyboard backlight as early in boot as possible to provide a indication that the BIOS is executing. Since this is bootblock it can't use the convenience function for checking for S3 resume so just read the PM1 value from the SOC and check it directly. Use a value of 75% for the current system as that is visible without being full brightness. BUG=chrome-os-partner:61464 TEST=boot on eve and check that keyboard backlight is enabled as soon as the SOC starts booting Change-Id: I9ac78e9c3913a2776943088f35142afe3ffef056 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18197 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-21soc/intel/apollolake: correct GPIO 13 IRQ numberAaron Durbin
The define for GPIO_13_IRQ had the wrong IRQ number. It should be 0x70 instead of 0x6f. BUG=chrome-os-partner:62085 BRANCH=reef TEST=touch controller doesn't indicate continuous interrupts Change-Id: I3a0726db59fc1eb7736d348aecbf1082719f15b2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18190 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-21mainboard/google/reef: remove internal pullups on PP1800_S railAaron Durbin
The PP1800_S rail is turned off in S3. However, enabling internal pullups on the pins which are connected to PP1800_S results in leakage into the P1800_S rail. Fix this by disabling the internal pullups on PP1800_S rail pins. BUG=chrome-os-partner:61968 BRANCH=reef TEST=measured leakage on PP1800_S rail. Gone with this patch. Change-Id: I5ae92b31c1a633f59d425f4105b8db1c9c18c808 Signed-off-by: Aaron Duribn <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18189 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-21pcengines/apu2: Add serial number in SMBIOSKyösti Mälkki
Change-Id: Ic8149b1dd19d70935e00881cffa7ead0960d1c78 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18154 Tested-by: build bot (Jenkins) Reviewed-by: Piotr Król <piotr.krol@3mdeb.com>
2017-01-21pcengines/apu2: Add SKU in SMBIOSKyösti Mälkki
Installed memory only, PCB revision cannot be detected. Change-Id: Ib6224018db3de4a7ddd9e6f7f30edc438c3f0702 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18153 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-21pcengines/apu2: Refactor reading memory strapKyösti Mälkki
Change-Id: Ie4f80619d9417200a007fc65154b97a5bc05f2f8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18152 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-21pcengines/apu2: Change SMBIOS part numberKyösti Mälkki
This string should not include manufacturer name. Change-Id: I63793b16129334ea4930b8b0264a39d7f9849bba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18151 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-21pcengines/apu2: Remove DDI configurationKyösti Mälkki
Assembled SoC part does not have integrated graphics. Change-Id: I5d157063cd850d343df73d448e6904c188a09730 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18150 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-20nb/gm45/gma.c: Fix reported Pixel clockArthur Heymans
Change-Id: Ie1c360ac29eb30af6f4b5447add467f3c13ba211 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18180 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-20lb_tables: make lb_mainboard and lb_strings record sizes 64-bit alignedRonald G. Minnich
They were sized to 32-bit alignment, this grows them to 64 bit-aligned. Change-Id: I494b942c4866a7912fb48a53f9524db20ac53a8c Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/18165 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-20google/snappy: Add weida touchscreen supportWisley Chen
Add weida touchscreen as 2nd touchscreen source BUG=chrome-os-partner:61865 BRANCH=reef TEST=emerge-snappy coreboot, and verified that touchscreen works on snappy. Change-Id: If76312a62e97da9d5de18ad895e90ee6b0f0c6ae Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/18166 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-20google/snappy: Use exported GPIOs and ACPI regulator for touchscreenWisley Chen
ELAN touchscreen device expects firmware to export GPIOs and ACPI regulators for managing power to the device. Thus, provide the required ACPI elements for OS driver to properly manage this device. BUG=None BRANCH=None TEST=Verified that touchscreen works properly on boot-up and after suspend/resume. Change-Id: I78e0c35f60289afe338d140d90784a433ca534ae Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/18163 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-20soc/intel/skylake: Set FSP-S UPD PchHdaIDispCodecDisconnect to 1Barnali Sarkar
As per Audio PCH team recommendation the iDisplay Audio/SDIN2 should be disabled to bypass InitializeDisplayAudio() function call. Display Audio Codec is HDA-Link Codec, which is not supported in I2S mode BUG=chrome-os-partner:61548 BRANCH=none TEST=Tested to verify that InitializeDisplayAudio() does not get called. Change-Id: Ie0771a8653821e737d10e876313917b4b7c64499 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/18091 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-01-20google/eve: Adjust DPTF parametersDuncan Laurie
- Remove the 0mA entry for the charger performance table - Slightly raise the passive limit for TSR2/TSR3 to 55C BUG=chrome-os-partner:58666 TEST=manual testing on P1 system Change-Id: I75c66afe04afbbdb64a45833eb938e57ff21b392 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18172 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-20google/eve: Enable ACPI keyboard backlightDuncan Laurie
Enable the ACPI interface to EC driven keyboard backlight. BUG=chrome-os-partner:61464 TEST=manual testing on P1 system Change-Id: I13d96c13d7db726b1e8289131db65104bd302efe Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18171 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-20google/eve: Enable pull-up on ACPRESENTDuncan Laurie
Enable an internal pull-up on ACPRESENT signal. BUG=chrome-os-partner:58666 TEST=manual testing on P1 Change-Id: I0bb86f4547272e021ffd10998faa0e2f103b0808 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18170 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-19mainboard/google/snappy: Disable unused devicesWisley Chen
The following devices i2c6, i2c7, spi1, spi2, uart3 are not used. BUG=none BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage Change-Id: I9bacdbdd194ce21686c1618494d113402f2bef6c Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/18140 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-19mainboard/google/reef: Ignore Audio DMIC IOSSTATEVaibhav Shankar
Audio DMIC PLL needs to be ON in S0ix to support Wake on Voice. This requires GPIO_79 and GPIO_80 to be configured as IGNORE IOSSTATE. So DMIC CLKs will be ON in S0ix. Change-Id: If91045a8664ce853366b670b9db38d620818fbab Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/18155 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-19driver/intel/fsp1_1: Fix boot failure for non-verstage caseTeo Boon Tiong
Currently car_stage_entry is defined only in romstage_after_verstage and as a result when SEPARATE_VERSTAGE is not selected, there is no entry point into romstage and romstage will not be started at all. The solution is move out romstage_after_verstage.S from fsp1.1 driver to skylake/romstage. And add CONFIG_PLATFORM_USES_FSP1_1 to fix the build and boot issue with this change. Besides that, rename the romstage_after_verstage to romstage_c_entry in more appropriate naming convention after this fix. Tested on SkyLake Saddle Brook (FSP 1.1) and KabyLake Rvp11 (FSP 2.0), romstage can be started successfully. Change-Id: I1cd2cf5655fdff6e23b7b76c3974e7dfd3835efd Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/17976 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-01-19soc/intel/skylake: Add SATA interrupt for APIC modeSooi, Li Cheng
Add SATA interrupt for APIC mode Change-Id: I9e0682e235715399da2c585174925c89b9116ab3 Signed-off-by: Sooi, Li Cheng <li.cheng.sooi@intel.com> Reviewed-on: https://review.coreboot.org/18130 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-01-19nb/amd/ddr3: Make the maximum CDD a signed valueTimothy Pearson
max_cdd_we_delta should be signed to allow for negative CDD. Found-by: Coverity Scan #1347355 Change-Id: Iaccd1021680296d169c26c25e339f83fbd7cc065 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/18162 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-17Revert "mainboard/google/snappy: Add PowerResource for ELAN touchscreen"Martin Roth
This reverts commit 01ba8cf7 (mainboard/google/snappy: Add PowerResource for ELAN touchscreen) Change was out of date and broke the build. Change-Id: Id47631ece1172c3f93bf6f40b8686dfd728842a9 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18158 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-01-17mainboard/google/reef: Ignore SPI IOSTANDBYLijian Zhao
SPI controller need to access flash descriptors/SFDP during s0ix exit, so all fast SPI IO can't be put into IOSTANDBY state. For reef, that will be FST_SPI_CLK_FB, GPIO_97, GPIO_99, GPIO_100, GPIO_103 and GPIO_106. BUG=chrome-os-partner:61370 BRANCH=reef TEST=Enter s0ix state in OS, after resume run flashrom to read SPI content. Change-Id: I5c59601ec00e93c03dd72a99a739add0950c6a51 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/18137 Tested-by: build bot (Jenkins) Reviewed-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-17mainboard/google/snappy: Add PowerResource for ELAN touchscreenWisley Chen
Define reset_gpio and enable_gpio for touchscreen device so that when kernel puts this device into D3, we put the device into reset. PowerResource _ON and _OFF routines are used to put the device into D0 and D3 states. BUG=chrome-os-partner:59034 BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage Change-Id: I08c05d06b2812a33b3fdff9b42b2a8e0653dd8b4 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/17366 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-17Combine Baytrail ChromeOS devices using variant schemeMatt DeVillier
Combine existing boards google/enguarde and google/ninja using their common reference board google/rambi as a baseboard. Variants contain board specific data: - DPTF ACPI components - I2C ACPI devices - RAM config / SPD data - devicetree config - GPIOs - board-specific HW components (e.g., LAN) Additionally, some minor cleanup/changes were made: - remove unused ACPI trackpad/touchscreen devices - correct I2C addresses in SMBIOS entries - clean up comment formatting - remove ACPI device for unused light sensor - switch I2C ACPI devices from edge to level triggered interrupts, for better compatibility/functionality (and to be consistent with other recently-upstreamed ChromeOS devices) The existing enguarde and ninja boards are removed. Variant setup modeled after google/auron Change-Id: Iae7855af9a224fd4cb948b854494e39b545ad449 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18129 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-17google/enguarde,ninja: Prep for variant mergeMatt DeVillier
Minor cleanup for enguarde and ninja devices: - enguarde: correct trackpad I2C slave address - enguarde: remove unused trackpad ACPI devices - ninja: remove unused PS2 keyboard ACPI device Change-Id: I1beb34059ba318e2d496a59e4b482f3462faf232 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18128 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-16intel: Fix copy/paste error in license textMarshall Dawson
Change all instances of "wacbmem_entryanty" to "warranty". Change-Id: I113333a85d40a820bd8745efe917181ded2b98bf Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18136 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-16riscv: Move mcall numbers to mcall.h, adjust their namesJonathan Neuschäfer
The new name and location make more sense: - The instruction used to call into machine mode isn't called "ecall" anymore; it's mcall now. - Having SBI_ in the name is slightly wrong, too: these numbers are not part of the Supervisor Binary Interface, they are just used to forward SBI calls (they could be renumbered arbitrarily without breaking an OS that's run under coreboot). Also remove mcall_dev_{req,resp} and the corresponding mcall numbers, which are no longer used. Change-Id: I76a8cb04e4ace51964b1cb4f67d49cfee9850da7 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/18146 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-01-16riscv/spike: Remove obsolete DRAM_SIZE_MB settingJonathan Neuschäfer
Change-Id: I4077739ac2be09107d8c5a3e4ae7ebd0da3cb876 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/18147 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-01-16mainboard/google/poppy: SD card changesFurquan Shaikh
1. Disable WP 2. Pass SD card detect info in ACPI BUG=chrome-os-partner:60713 BRANCH=None TEST=Verified that OS is able to detect SD card and read/write to it. Change-Id: Ide84d4b86c0fac50a07520dfd76d6d3a921f2ecc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18138 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-16mainboard/google/poppy: Update DQS and DQ Byte mappings for poppyRizwan Qureshi
poppy schematics have undergone change after review, update DQS and DQ Byte mappings based on the new schematics. BUG=chrome-os-partner:61856 BRANCH=None TEST= Build and boot all the poppy proto SKUs to OS. Change-Id: Ie4532035f37c25540abb26122234f6e3346ede69 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18133 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-16riscv: get SBI calls to workRonald G. Minnich
SBI calls, as it turned out, were never right. They did not set the stack correctly on traps. They were not correctly setting the MIP instead of the SIP (although this was not really well documented). On Harvey, we were trying to avoid using them, and due to a bug in SPIKE, our avoidance worked. Once SPIKE was fixed, our avoidance broke. This set of changes is tested and working with Harvey which, for the first time, is making SBI calls. It's not pretty and we're going to want to rework trap_util.S in coming days. Change-Id: Ibef530adcc58d33e2c44ff758e0b7d2acbdc5e99 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/18097 Tested-by: build bot (Jenkins)
2017-01-14amd/mct: Add default values to highest_rank_count for DDR2Timothy Pearson
The values of highest_rank_count were undefined on DDR2 systems. Explcitly define these values on DDR2 platforms. Found-by: Coverity Scan #1347338 Change-Id: Iad7bb00db97b2816fcc44fb5941bd14373451da2 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/18078 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-14soc/intel/apollolake: Allow USB2 eye pattern configuration in devicetreeKane Chen
This code allows people to override the usb2 eye pattern UPD settings for boards. BUG=chrome-os-partner:61031 BRANCH=None TEST=Usb2 function ok and make sure fsp upd is overridden Change-Id: I5fab620a29aba196edf1f24ffe6a1695de1e523e Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/18060 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-14apollolake: Update UPD header files for FSP 1.3.0Brandon Breitenstein
These updated header files contain USB tuning parameters as well as some general cleanup of unused parameters in the UPD Headers. This patch along with the upcoming FSP 1.3.0 release will allow for USB tuning on apollolake platforms. CQ-DEPEND=CL:*315403 BUG=chrome-os-partner:61031 Change-Id: Id7cce1ea83057630d508523ada18c5425804535e Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/18046 Reviewed-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-13aopen/dxplplusu: Switch to 2MiB flashKyösti Mälkki
Change-Id: Iedc15823dc24b3211fe7954cdf4302934a517afb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17919 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-13mainboard/google/poppy: Disable EC SW syncFurquan Shaikh
BUG=chrome-os-partner:60513 BRANCH=None TEST=Verified that EC SW sync is disabled Change-Id: I399b26aa64084f5d5e91a2e585281dc48fa81c89 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18114 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-13mainboard/google/poppy: Enable touchscreen in ACPIFurquan Shaikh
BUG=chrome-os-partner:60513 BRANCH=None TEST=Verified that touchscreen works on poppy. Change-Id: I0fd605048b91b126ca5b5f8c1c4d6d3f46f866a3 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18113 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Martin Roth <martinroth@google.com>
2017-01-13mainboard/google/poppy: Correct the index for SPD binariesFurquan Shaikh
BUG=chrome-os-partner:60513 BRANCH=None TEST=Picks up correct SPD for index. Change-Id: Iac683ab3b8151747940b0ad7e257da3d9b0ac622 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18112 Tested-by: build bot (Jenkins) Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-13mainboard/google/poppy: Enable SD cardFurquan Shaikh
BUG=chrome-os-partner:60713 BRANCH=None TEST=sdcard is detected. Change-Id: I9ec0cabff0ed7973f5e7dd2c1eae346ae6a1aa99 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18111 Tested-by: build bot (Jenkins) Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-13fsp_baytrail: Enable graphic init per defaultWerner Zeh
Baytrail SoC has a bug where in some cases the DisplayPort can hang leading to a non-working display (it just stays black). To avoid this hang, a patch was introduced in 02/2016 (1c3b1112fa - fsp_baytrail: Fix a possible hanging DisplayPort) but per default not switched on so that each mainboard can decide if it wants to use this patch or not. Recently a new case of this bug was reported by Benoit Sansoni (benoit.sansoni@kontron.com) and he requested to enable this fix per default as it costs him a lot of time to find the cause and even the already available fix in coreboot. To avoid this effort for someone else in the future we can enable this fix per default as no negative side effects are known and it is now tested at Siemens and at Kontron on different mainboards with success. As the goal is to enable this code permanently the config switch is not longer needed and is removed. Change-Id: I15bd682218d0dc887945cc91ee3e5488945a6355 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/18109 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-13sb/nvidia/mcp55: Fix typo in nic.cMartin Roth
The comparison value was obviously wrong here. One too many 'f' characters. Found-by: Coverity Scan #1229588 & 1229604 Change-Id: Iedd4f956d846f1c8661390b346c7397346def86b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18100 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-14 04:22:49 +0000