summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2018-05-27grunt: Wire up the EC SMI handlerRaul E Rangel
This won't actually get called yet since the GPIO pin has not been configured as SMI. BUG=b:80295434 TEST=grunt: Made sure events could be processed. Change-Id: I189e26196e4543b3e34bff5d9df8566eff07d585 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/26546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-05-27amd: Don't call halt() when in SMMRaul E Rangel
This copies what Intel does. BUG=b:80295434 TEST=grunt: Made sure that the S5 SMI interrupt gets fired. Change-Id: I7874824cad01054c6bdeff12d248e671f27be030 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/26545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-27stoneyridge GPIO: Create and use PAD_INT for interrupt pinsRichard Spiegel
The default interrupt control for GPIO pins within stoneyridge is for edge triggered, high. However, sometimes these need to change, or maybe the interrupt needs to be reported or delivered. This was the case of platform grunt, where the interrupt related bits were being changed afterwards. Ideally all the bits should be programmed through the same procedure. Create several PAD_INT definitions (for general configuration, for trigger configuration and for interrupt type configuration) and change function sb_program_gpios() to accept the output from PAD_INT_XX and program all the necessary bits while keeping compatibility with other PAD_XX definitions. BUG=b:72875858 TEST=Add code to report GPIO and interrupt configuration, build grunt and record a baseline. Add new code, rebuild grunt and record a test output. Compare baseline against test, there should be no change in GPIO or interrupt programming. Remove code that reports GPIO/interrupt configuration. Change-Id: I3457543bdf64ec757fd82df53c83fdc1d03c1f22 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-26mainboard/intel/dg41wv: Fix lint check errorMaulik V Vaghela
Fix lint error due to non-ASCII characters BUG=none BRANCH=none TEST=check if no error in checkpatch.pl script. Change-Id: Iec7682e460c8e0d467a70349a23390554cc1de92 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/26562 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-26mb/intel/dg41wv: Add mainboardArthur Heymans
This board was used a test target for the x4x DDR3 raminit patches and has an easy to access DIP8 socket. What is tested and works: * S3 resume * PEG, PCI, USB, SATA * Sound * Ethernet * Native graphic init (textmode and linear fb) on the VGA output * Passing memtest86+ with 2 2Rx8 4G dimms * PS2 Keyboard * Flashing coreboot internally from vendor BIOS. What does not work: * Running dram at 533 MHz (limited at 400MHz currently) Tested with two 4G dual rank DDR3 dimm, booted SeaBIOS and Linux 4.10. Change-Id: If01bf658e52d273c3c203d362f21c3cb9c623f40 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20003 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25mb/google/poppy/variants/nami: Perform PL2 setting in variant_devtree_udpateFurquan Shaikh
This change moves PL2 override to variant_devtree_update for two reasons: 1. This function was added to basically override devtree settings in variant specific code. So, it would be a good idea to perform all the overrides in a single place. 2. Adding a device for performing nami_enable would require changes to devicetree and special handling for calling this device enable. Thus, nami_enable was never getting called. BUG=b:80148703 Change-Id: Ifa24a7b6e99cad2368b3d656a757f26297373121 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-25sb/intel/common/pirq_gen: Rework generating pin-route tablesArthur Heymans
This creates a pin-route matrix first and then generates the ACPI entries based on that. This approach has the advantage of being simpler (no need for checks on double entries) and requiring less access to the pci config space. A few thing that are also fixed: * Don't declare DEFAULT_RCBA redundantly. * Only loop over PCI devices on bus 0 * Add a license header to rcba_pirq.c * Remove inappropriate use of typedefs * Fix the pin field: needs to be a byte * Fix the source field: it should either be a byte or a path (according to Advanced Configuration and Power Interface Specification rev 2.0c) Change-Id: Ic68a91d0cb55942a4d928b30f73e1c779142420d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22979 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25mb/google/reef: fix indention in memory.cAaron Durbin
In cbdbf018 (mb/google/reef/variants/: Add new memory ID) a new memory configuration entry was added. However, it was using spaces for indention. Correct that. Change-Id: Iaf788b0ad8a6ef3b001e7f29a6710e6e8f731ecf Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/26513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-25elog: Only log POST code from previous boot on non-S3 resumeDaniel Kurtz
It doesn't make sense to log post codes from a previous (failed) boot if we are resuming from S3, since the previous boot has to have been successful in order to enter S3 in the first place. While we are at it, use a helper function to combine conditionals and improve readability. BUG=none TEST=boot, suspend & resume grunt Change-Id: I4f3bb8526a0c8c0ea1efd924628b33c147543b88 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26528 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25elog: Only print TYPE_BOOT on S3-resume if CONFIG_ELOG_BOOT_COUNTDaniel Kurtz
Previously, we were unconditionally adding a TYPE_BOOT message to the ELOG on every boot (even S3 resume) if CONFIG_ELOG_BOOT_COUNT was disabled. Now that boot_count_read() returns 0 for the !CONFIG_ELOG_BOOT_COUNT case, the code becomes a bit simpler. BUG=b:79865267 TEST=firmware_EventLog Change-Id: I803fa4c3e03b6cc94751cf0ce34b78021ae2124e Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26527 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25elog: Allow calling boot_count_read() without CONFIG_ELOG_BOOT_COUNTDaniel Kurtz
Have boot_count_read() just return 0 if CONFIG_ELOG_BOOT_COUNT is not enabled. BUG=b:79865267 TEST=firmware_EventLog Change-Id: I70f16226371324dea37b3f36f85c2037e324ef31 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26526 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25soc/amd/stoneyridge: Increment boot_count on non-S3 bootsDaniel Kurtz
Increment the boot_count from romstage when not resuming from S3. BUG=b:80266624 TEST=firmware_EventLog TEST=boot, then: mosys eventlog list | grep boot 1 | 2018-05-24 16:51:42 | System boot | 1 reboot mosys eventlog list | grep boot 1 | 2018-05-24 16:51:42 | System boot | 1 6 | 2018-05-24 16:52:34 | System boot | 2 Change-Id: Ideec9da809e494fb0ea073f648540285972f8238 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26525 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25soc/amd/stoneyridge: Record ACPI Wake events in ELOGDaniel Kurtz
We are already reporting the Wake source, but we must also report the ACPI wake itself. BUG=b:79865267 TEST=firmware_EventLog Change-Id: Id26dff46379800a63ab9b77f135d23c6382f77e6 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26522 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25mb/google/poppy/variants/nami: Use GPP_E4 for BT_OFF#Frank Wu
The BT W_DISABLE2# pin is connected to GPP_E4 in the latest schematic. Update GPP_E4 as GPO and set 1 as default. BUG=b:79993692, b:72007632 BRANCH=None TEST=Enable/disable BT/WLAN by following command. Enable: localhost ~ # iotools mmio_write32 0xfdae0590 0x40000201 localhost ~ # iotools mmio_write32 0xfdae05a0 0x40000201 Disable: localhost ~ # iotools mmio_write32 0xfdae0590 0x40000200 localhost ~ # iotools mmio_write32 0xfdae05a0 0x40000200 Change-Id: I9ef1a5314652ab29172d246abd58ee4e1a8a6299 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26502 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25mb/google/kahlee: Init APU_BIOS_FLASH_WP_L GPIO to reset stageDaniel Kurtz
GPIO APU_BIOS_FLASH_WP_L is first read in ROM stage to determine the state of the BIOS FLASH Write Protect signal at boot. The result of this read accumulated in the vboot state that's passed on to the upper layers of the stack. Therefore this GPIO must be configured as a "reset stage" GPIO, not a "RAM" stage GPIO. BUG=b:79866233 TEST=firmware_WriteProtect Change-Id: I1d96ab4bbfeaf9db9f74cf0c58cbab2104079bf7 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26498 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25device: Move find_dev_path() to device_const.cKyösti Mälkki
Change-Id: I8a27aa7157b5706623272ba9354ed8dff9b8184f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-25device: Move dev_find_path() to device_const.cNico Huber
Make it available early and use it in dev_find_next_pci_device(). Change-Id: I1d0ad07f37ea79dae2b9a592fcccba5e03fd86d5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/26294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-25device: Rename device_simple.c --> device_const.cNico Huber
In early stages (pre ramstage), we have two notions of devices. To access the hardware, "simple device" handles are used. These are plain numbers. To access the static information of the device tree, we use `struct device` pointers. This is referred to as DEVTREE_EARLY in the code. This file is about the latter and its name reflects that the tree remains unmodified. Change-Id: I31aeb118615e86026f7111f83a7866d4e7426170 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/26293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-25soc/intel/cannonlake: Reduce STACK_SIZE to 4KiBSubrata Banik
TEST=Build and boot cannonlake rvp till OS. Change-Id: I5369afd0d1d66e25d210416730a2c1c91ca8e94a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-25drivers/intel/fsp2_0: Make use of xmalloc for FSP-S UPDSubrata Banik
Don't allocate FSP-S UPD over stack. This patch reduces stack usage for Cannonlake platform. TEST=On CNL platform stack usage reduces from ~3.6KiB to ~1KiB. Change-Id: I07ef0db6720d7e6865ac1641ce2661009332907c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26501 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24soc/intel/baytrail: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I8b2cfe3e2090fb8eed755e40d337c6049d8dd96e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24nb/intel/fsp_sandybridge: Fix lost const qualifier on 'device_t'Elyes HAOUAS
Missing '*const' in Change #26195 added into function northbridge_get_tseg_base(void). Change-Id: Ideb9a9cb98d34f2ed1034b8ee20b3b06aa5ff1e2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26455 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24sb/intel/i82801ix: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Iefef4e72f1012c8a6edbb9e5c94bdc162bed93d0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24sb/intel/i82801jx: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I37be7672c88b28180d7d4b46928ebed8472ec020 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24sb/intel/fsp_i89xx: Get rid of device_tElyes HAOUAS
Use of device_t is discouraged unless necessary. Change-Id: I89f9fe94c1e3e5c2b183572d7f603d016d0f0e1c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24Remove leftover Intel CPU supportKyösti Mälkki
Change-Id: I6ac67137d5f5c63dbc4fc54eacb3e326ccf423d4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24mb/hp: Add new port compaq_8200_elite_sffPatrick Rudolph
Add new port based on autoport. The board uses a NPCD378 SuperIO, that is full of custom hardware. The 8MiB flash SOIC-8 can be accessed after cutting of a part of the DIMM slot holder. The flash IC has no diode, powering a part of the board while flashing externaly, including the Standby-LED. The following have been tested and is working: * Native raminit with up to four DIMMs * Libgfxinit on DisplayPort * USB * EHCI debug * Serial on RS232 * Ethernet * PCIe on x4 * PCIe on x16 * SATA * Booting GNU Linux 4.14 using SeaBIOS 1.11.1 as payload * Flashing internaly * PS/2 is working Untested: * PCI slot * LPT port * VBIOS * S3 resume Not working: * PSU fan managment (runs at 100%) * Half of SuperIO functionality is unknown TODO: * Reverse engineer remaining SuperIO registers * Reverse engineer SMM Fixes on follow-up commits: * Added PSU fan control * Reverse engineered some of Super IO's HWM registers * Added SMBIOS tables for IPMI Change-Id: I4ee8da6349222fda8b6c30a7210ffdd65c183439 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/25385 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24AMD geode/lx: Remove generic_sdram.c includeKyösti Mälkki
The file under lib/ will be removed with K8 and Geode LX is the only other platform using it. Change-Id: Id49d72358ecfc4aae4980e3ae787952073e5c838 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24AMD: Remove some leftover includesKyösti Mälkki
Change-Id: I740d945693b4f16495488fb76ad6d1ee531185ac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24mb/gigabyte/ga-h61m-s2pv: Add new mainboardAngel Pons
Tested with GRUB 2.02 as a payload, booting Arch Linux with latest kernel. This code is based on the output of autoport as well as existing ga-b75m-d3h and ga-b75m-d3v mainboards. Working: - Serial port I/O - S3 suspend/resume (broken with SeaBIOS 1.11.1) - USB ports and headers - Gigabit Ethernet - Integrated graphics (libgfxinit) - PCIe x16 graphics - PCIe x1 - SATA controller - Hardware Monitor - Fan Control (fancontrol on linux works well) - Native raminit (4+4GB, 4+2GB, 2+2GB, DDR3-1333) - Native graphics init with libgfxinit - flashrom, using the internal programmer. Tested with coreboot, as well as with the vendor firmware. Backup chip is untested. - NVRAM settings. Only `gfx_uma_size` and `debug_level` have been tested with values different from the default. Untested: - VGA BIOS for integrated graphics init - DVI port. It can detect a "fake" display, that is, an EEPROM connected to the DVI port. - PS/2 ports - Audio: Only rear output (green) has been tested. - EHCI debug. - Parallel port - Non-Linux OSes - ACPI thermal zone and fan control (probably not working) Not working: - SATA devices with Tianocore (payload issue) - PCIe to PCI bridge. It seems to be poorly supported on Linux, it lacks a public datasheet and vendor BIOS behaves in the same way: The bridge and the devices behind it appear, but drivers fail to find devices attached to the bridge. Change-Id: I598a0b75093a0f1aef2ac615035d66786a8c22cb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/25912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-24Remove leftover AMD CIMX RD890 northbridge supportKyösti Mälkki
Change-Id: I3f2cea79a11a52e94f479b25f22eb3726af38fa3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24Remove leftover AMD CIMX RD890 vendorcodeKyösti Mälkki
Change-Id: Ic7d80b25c0815f3816ae40646d024e0d9fe61f08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24Remove leftover VIA vt82c686Kyösti Mälkki
Change-Id: Id215fb22c3cf1890fd001e2f7a9a7bd0105c1747 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24Remove leftover Intel i82801b supportKyösti Mälkki
Change-Id: If85d73745ec858155c501aa637fd27a62a41dd68 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24Remove leftover Intel i82801a supportKyösti Mälkki
Change-Id: Ibcecd34d552cd1a4d945c74996d47223a39dc5c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26503 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-24nb/amd/amdfam10: Get rid of device_tKyösti Mälkki
Change-Id: Iac6be374842063cc383af20c73900e3699a72653 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24sb/amb/rs780: Get rid of device_tKyösti Mälkki
By mistake this was forgotten from previous commit touching the same directory. Change-Id: I23e3e579ccbcb8a251cdde11215ec171b78b7159 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26494 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24mb/packardbell/ms2290: Get rid of device_tKyösti Mälkki
Change-Id: I42b19d660b681cca8fea7d2f52b43c8daceb5e35 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24mb/emulation/qemu-q35: Get rid of device_tKyösti Mälkki
Change-Id: I74461e75abce6cdd0c7a16b3a6589de3486a1a3f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24nb/intel/x4x: Adapt post JEDEC for DDR3Arthur Heymans
Change-Id: I708f98dc2f36af73bb5933d186b4984649e149a1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-05-24nb/intel/x4x/raminit: Add DDR3 enhanced mode and power settingsArthur Heymans
Change-Id: I9d34154d3ac1dd1e5400d692d4dcce70d95662c8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-05-24nb/intel/x4x/raminit: Add DDR3 specific dra/drb settingsArthur Heymans
When programming the final dram attribute and dram boundary settings, on DDR3 dram one also needs to enable ZQCAL in the CxREFRCTRL (DRAM Refresh Control) register as documented in "Intel ® 4 Series Chipset Family" documentation. Change-Id: I11a79f6800dbfe19c2bd33c0d6caca14b034e384 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-24nb/intel/x4x: Implement write levelingArthur Heymans
DDR3 adapted a fly-by topology which allows for better signal integrity but at the same time requires additional calibration. This is done by settings the targeted rank in write leveling mode while disabling output buffer on the other ranks. After that the DQS signal gets sampled over DQ until a transition from high to low is found. Change-Id: I695969868b4534f87dd1f37244fdfac891a417f0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-05-24nb/intel/x4x: Add DDR3 JEDEC initArthur Heymans
Add DDR3 JEDEC init (Power up and Initialization by setting emrs regs) This also modifies the send_jedec_cmd function as DDR3 dimms can have ranks mirrored which needs to be accounted for. The ddr3_emrs1_config array is placed externally since it is also needed for write leveling. Change-Id: I510b8669aaa48ba99fb4dcf1ece716aef26741bb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-05-24device: Always build device_simple.c for less code duplicationNico Huber
Change-Id: Iec0a11d67d7641996f26b3a01352be762006ebb6 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/26292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-24src: Add space after 'while'Elyes HAOUAS
Change-Id: I44cdb6578f9560cf4b8b52a4958b95b65e0cd57a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-05-24mb/intel/glkrvp: Remove unused DPTF_CPU_ACTIVE_ACx definesSumeet Pawnikar
GeminiLake platform is fan-less design. We do not need these DPTF_CPU_ACTIVE_ACx defines. Removing these for GeminiLake RVP board as these are not being used. Change-Id: I810809bf58198a028e6cfcdbd68887f5f154a0ad Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/26469 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24mb/google/reef: Remove unused DPTF_CPU_ACTIVE_ACx definesSumeet Pawnikar
ApolloLake based reef platform is fan-less design. We do not need these DPTF_CPU_ACTIVE_ACx defines. Removing these from all reef variants as those are not being used. Change-Id: Id3cb7f7826a5e02cf447c70ab5cdc9b5d86982ca Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/26468 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24src: Remove space after `defined`Elyes HAOUAS
Change-Id: If450a68e98261ffba4afadbce47c156c7e89e7e4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26460 Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24nb/intel/sandybridge: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: If36a879fbe7a93a214d74dbfa6fb3ee2d09a044a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 15:33:26 +0000