summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2016-07-01lib: remove ulzma()Aaron Durbin
That function is no longer used. All users have been updated to use the ulzman() function which specifies lengths for the input and output buffers. Change-Id: Ie630172be914a88ace010ec3ff4ff97da414cb5e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15526 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-07-01Kconfig: Show DEBUG_BOOT_STATE in the Debug menuJonathan Neuschäfer
Change-Id: I22441ee0d19aa1b2e2f40278ce30092c86e0adc9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15522 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-01AGESA boards: Fix split to romstage and ramstageKyösti Mälkki
Boards broken with commit: 062ef1c AGESA boards: Split dispatcher to romstage and ramstage Boot failure with asus/f2a85-m witnessed around MemMS3Save() call, message "Save memory S3 data in heap" in verbose agesa logs was replaced by a system reset. Default stubs for MemS3ResumeConstructNBBlock() returned TRUE without initializing the block contents. This would not work for case with multiple NB support built into same firmware. MemMCreateS3NbBlock() then returned with S3NBPtr!=NULL with uninitialized data and MemMContextSave() referenced those as invalid pointers. There is no reason to prevent booting in the case S3 resume data is not passed to ramstage, so remove the ASSERT(). It only affects builds with IDSOPT_IDS_ENABLED=TRUE anyways. Change-Id: I8fd1e308ceab2b6f4b4c90f0f712934c2918d92d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15344 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2016-07-01skylake: Generate ACPI timing values for I2C devicesDuncan Laurie
Have the Skylake SOC generate ACPI timing values for the enabled I2C controllers instead of passing it in the DSDT with static timings. The timing values are generated from the controller clock speed and are more accurate than the hardcoded values that were in the ASL which were originally copied from Broadwell where the controller is running at a different clock speed... Additionally it is now possible for a board to override the values using devicetree.cb. If zero is passed in for SCL HCNT or LCNT then the kernel will generate its own timing using the same forumla, but if the SDA hold time value is zero the kernel will NOT generate a correct value and the SDA hold time may be incorrect. This was tested on the Chell platform to ensure all the I2C devices on the board are still operational with these new timing values. Change-Id: I4feb3df9e083592792f8fadd7105e081a984a906 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15291 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-01mainboard/google/reef: Configure DDI0, DDI1 HPD GPIO linesAbhay Kumar
Configure GPIO_199 and GPIO_200 as NF2 to work as HPD. Change-Id: If3aa6b75ed22c221cfbedaecf16035cdd9939387 Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Reviewed-on: https://review.coreboot.org/15447 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-01mainboard/google/reef: Use common NHLTSaurabh Satija
Add ACPI NHLT table generation that the current hardware supports. Reef supports two audio codecs, Dialog 7219 for headsets and Maxim 98357 for speakers. Change-Id: Ie39947960c86b8f65140834e31f9ed9f1b578485 Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Reviewed-on: https://review.coreboot.org/15440 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-01mainboard/intel/amenia: add NHLT supportSaurabh Satija
Add ACPI NHLT table generation that the current hardware supports as well select the hardware used on the board. Amenia has support for two audio codecs, Dialog for headsets and Maxim for speakers. Change-Id: Iaba9ec81ffb4f128f2e4413dec5174d9ecb856c9 Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Reviewed-on: https://review.coreboot.org/15024 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-01soc/intel/apollolake: add initial NHLT supportSaurabh Satija
Provide the initial NHLT support for the following hardware: 1. 2 channel digital microphone array 2. Dialog 7219 headset 3. Maxim 98357 speaker amplifiers. The code utilizes the Intel SoC common NHLT support. Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15504 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-07-01soc/intel/common: use nvs.h include for nhlt codeAaron Durbin
The nvs.h header is the one which defines global_nvs_t proper. Don't rely on an indirect inclusion. Change-Id: I89d6a73f65e408c73f068b4a35b5efd361a6e5d3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15503 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-07-01soc/intel/apollolake: typedef global_nvs_t for consistencyAaron Durbin
Every other platform has global_nvs_t as a typedef. For some reason apollolake didn't bother following current conventions. Fix this omission to allow for better code sharing and consistency. Change-Id: Id596eed517737759a64ce803c89ea2a05cbe2cce Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15502 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-30vbnv: Do not initialize vbnv_copy in vbnv layerFurquan Shaikh
If read_vbnv finds that the vbnv_copy is not valid, it initializes it with the correct HEADER_SIGNATURE and other attributes. However, the vbnv copy is checked for validity and initialized at the vboot layer as well. Since, vboot is the owner of this data, it should be the one initializing it. Thus, if read_vbnv sees that the data is not valid, simply reset it to all 0s and let vboot layer take care of it. This also removes the need for additional checks to ensure that the dirty vbnv copy is properly updated on storage. Change-Id: I6101ac41f31f720a6e357c9c56e571d62e0f2f47 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15498 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-06-30soc/apollolake: Expose a function to read pmc barShaunak Saha
This patch exposes a function to read pmc bar. PMC bar is read in function read_pmc_mmio_bar which is defined static in file pmutil.c. This patch exposes that functionality to call it from other files. BUG=chrome-os-partner:53438 TEST= Read the PMC bar value properly from outside pmutil file. Change-Id: I26ee13e6ab95d3a8991c7f8ea4b3856ceb015d10 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15460 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-30fsp_broadwell_de: Enable Super I/O address range decodeWerner Zeh
If there is an external 16550 like UART, one needs to enable the appropriate address ranges before console_init() is called so that the init sequence can reach the external UART. Otherwise the UART will only start working in ramstage and will produce unreadable characters in romstage due to the lack of initialization. Tested-on: Siemens MC_BDX1 Change-Id: Iafc5b5b6df14916c5ed778928521d4a8f539cf46 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/15495 Tested-by: build bot (Jenkins) Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-30vendorcode/siemens: Add extended info block support to hwilibWerner Zeh
Add support for a fourth info block type to hwilib. This block provides new values and is now variable in length. Change-Id: Ia928b4a98b806ba3e80fb576b78f60bb8f2ea3fc Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/15478 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-30soc/intel/apollolake: fix space indention in pm.hAaron Durbin
More spaces missed in review. Change-Id: I842da05ca6ad4f2c13d2d42433e41da57ccf7f96 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15500 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-29soc/intel/{common,skylake}: provide common NHLT SoC supportAaron Durbin
The nhlt_soc_serialize() and nhlt_soc_serialize_oem_overrides() functions should be able to be leveraged on all Intel SoCs which support NHLT. Therefore provide that functionality and make skylake use it. Change-Id: Ib5535cc874f2680ec22554cecaf97b09753cacd0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15490 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-29lib/nhlt: drop nhlt_soc_add_endpoint()Aaron Durbin
The nhlt_soc_add_endpoint() is no longer used. Drop its declaration. Change-Id: I3b68471650a43c5faae44bde523abca7ba250a34 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15489 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-29soc/intel/skylake: refactor nhlt supportAaron Durbin
Utilize the new NHLT helper functions by driving the NHLT endpoints through data descriptors. Change-Id: I80838214d3615b83d4939ec2d96a4fd7050d5920 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15488 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-29soc/intel/skylake: fix nhlt/ssm4567.c indentionAaron Durbin
Whitespace fix for improper space usage for indention. Change-Id: Ia6470bf152c57786d2d7f3d35bbf0609a2ee3ba2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15487 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-29lib/nhlt: add helper functions for adding endpointsAaron Durbin
In order to ease the porting of supporting NHLT endpoints introduce a nhlt_endpoint_descriptor structure as well as corresponding helper functions. Change-Id: I68edaf681b4e60502f6ddbbd04de21d8aa072296 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15486 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-06-29soc/intel/apollolake: Change PCI macros to match SkylakeAndrey Petrov
Change PCI macros in such a way they can be transparently used across romstage and ramstage. Change-Id: Idc708c1990f2fc1d941bb82efcb0a697524f2eca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15483 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-29soc/intel/apollolake: Update Upd header files for FSP Label 143_10Brandon Breitenstein
New UPDs added to header files as well as many comment fixes. Memory infor is now defined in FspmUpd.h and added ability to skip CSE RBP for coreboot. Removes some UPDs that are no longer available from source. BUG=chrome-os-partner:54677 BRANCH=none TEST=built and tested with FSP 143_10 version Change-Id: I7e1f531ebbe343b45151a265ac715ae74aeffcad Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/15459 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-29vbnv: Do not silently reset cache in read_vbnvFurquan Shaikh
Currently, read_vbnv performs a reset of the vbnv cache if it is not valid. However, this information is not passed up to the vboot layer, thus resulting in missed write-back of vbnv cache to storage if vboot does not update the cache itself. Update read_vbnv to return a value depending upon whether it wants a write-back to be performed when save is called. Return value: 0 = No write-back required 1 = Write-back of VBNV cache is required. Change-Id: I239939d5f9731d89a9d53fe662321b93fc1ab113 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15457 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-29AMD k8 fam10: Refactor S3 recoveryKyösti Mälkki
Change-Id: I09c218ca05391e8d80880be0aa5bdfd5079acf85 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15465 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-29intel/haswell: No need for ACPI S3 resume backupKyösti Mälkki
Platform is with RELOCATABLE_RAMSTAGE so nothing to backup. Change-Id: I2397db8affb084e34ca89dac4840f966b994e636 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15462 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-29intel romstage: Use run_ramstage()Kyösti Mälkki
Change-Id: I22a33e6027a4e807f7157a0dfafbd6377bc1285d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15461 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-29google/reef: set 20K PULLUP on SDCARD DATA/CLK/CMDFreddy Paul
SD card need 20K PULLUP on D0-D3/CLOCK/COMMAND lines. Without this SDCARD will throw data read/write errors. BUG=chrome-os-partner:54676 TEST=Build and boot to OS. Verify SD card is detected and data read/write works well. Change-Id: I90da5b84dc2e488eb38f805322bd7b4dee394e5b Signed-off-by: Freddy Paul <freddy.paul@intel.com> Reviewed-on: https://review.coreboot.org/15345 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-28soc/intel/apollolake: Add NHLT table region to ACPI global nvsSaurabh Satija
Add address and length of NHLT table in ACPI. Change-Id: Ic0959a8aae18d54e10e3fcd95bfc98a6b6e0385a Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Reviewed-on: https://review.coreboot.org/15025 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-28apollolake: Add ACPI device for audio controllerSaurabh Satija
Add the audio controller device to ACPI and define the _DSM handler to return the address of the NHLT table, if set in NVS. Change-Id: I619dbfb562b94255e42a3e5d5a3926c28b14db3e Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Reviewed-on: https://review.coreboot.org/15026 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2016-06-28intel/amenia: Configure unused PadsJagadish Krishnamoorthy
Configure unused Pads as NC and sort the pads according to the gpio community. Move the pad configurations from mainboard to gpio.h BUG=none TEST=Boot to OS and check all functionalities. Change-Id: I8e9eeebf5d75c71c521649c72612c06f3fa43701 Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/15327 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-28riscv/bootblock.S: Register machine-mode, not supervisor-mode trap handlerJonathan Neuschäfer
Change-Id: Ic42d8490cc02a3907e2989435aab786f7c0f39c9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15287 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-06-28arch/riscv: Show fault PC and load address on load access faultsJonathan Neuschäfer
Change-Id: Ib0535bf25ce25550cc17f64177f804a70aa13fb3 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15286 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-06-28arch/riscv: Move _start to the beginning of the bootblockJonathan Neuschäfer
The different entry points (0x100, 0x140, ...), which were defined in the RISC-V Privileged Specification 1.7, aren't used anymore. Instead the Spike bootrom jumps at the start of our image, and traps are handled through mtvec. Change-Id: I865adec5e7a752a25bac93a45654ac06e27d5a8e Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15283 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-06-28tegra124: Actually align the framebuffer's bytes-per-line to 32Paul Kocialkowski
The previous change with that intent aligned the framebuffer's bytes-per-line to 64 instead of 32: commit 8957dd6b52919ed634aa502dfd5b6316a6e6e055 Author: Paul Kocialkowski <contact@paulk.fr> Date: Sun May 1 18:38:04 2016 +0200 tegra124: Align the framebuffer's bytes-per-line to 32 Change-Id: I88bba2ff355a51d42cab6a869ec1e9c534160b9c Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/14816 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-06-28google/reef: disable unused devicesJagadish Krishnamoorthy
BRANCH=none BUG=chrome-os-partner:54325, chrome-os-partner:54581 TEST=device off in devicetree should disable the device. Change-Id: I5dada06cba0eea8a30f297e3a6940a36b2ff40ee Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/15339 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-28soc/apollolake: Populate fields in FADT to enable\disable SCIHannah Williams
This will allow kernel to trigger a APM SMI to enable\disable SCI Change-Id: I1be79b7a3082c23fbaf204eff55360c46458e325 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/15347 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-27intel/amenia: disable unused devicesJagadish Krishnamoorthy
BRANCH=none BUG=chrome-os-partner:54325 TEST=device off in devicetree should disable the device. Change-Id: I486a4c5e8970047477068e22b799d06caea03330 Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/15338 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-27soc/intel/apollolake: add code to disable unused deviceJagadish Krishnamoorthy
Parse the devicetree and pass the unused device to fsp for disabling the device function. BRANCH=none BUG=chrome-os-partner:54325 TEST=device off in devicetree should disable the device. Change-Id: I784b72a43fda13aa17634bf680205ab2d36e8d09 Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/15337 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-27intel/apollolake: Set sleep type to S5 on vboot reboot requestFurquan Shaikh
Add support for vboot_platform_prepare_reboot which is called whenever vboot requests reboot of the platform. SLP_TYPE needs to be set to S5 in such conditions since the platform would no longer be in a resuming state after reset. Change-Id: I01392bfda90c9274cd52c1004555d250b1d539b7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15340 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-26intel/nehalem: Use common ACPI S3 recoveryKyösti Mälkki
Change-Id: Ic82a732ba28ba24e42a635539cca3d76128b40b5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15247 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-06-26intel/gm45: Use common ACPI S3 recoveryKyösti Mälkki
Change-Id: I3148dbbcb06676f48b6bc357124403b70b9bcb6a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15246 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-06-26intel/i945: Use common ACPI S3 recoveryKyösti Mälkki
Change-Id: I6f0cdc80870fddeaada3191e493bd85fdefee07f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15245 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-06-24rockchip/rk3399: provide multiple SDRAM configurationsLin Huang
We want to be able to easily change SDRAM clock rate for debugging purposes. This patch adds configurations for 4 different clock rates. Same configs are used for all rk3399 boards at 200, 666 and 800 MHz. Kevin board does not run reliably at 666 MHz, an option for it is added to run at 300 MHz, this option is available to Kevin only. There is not much room left in the coreboot romstage section, this is why the config file for 928 MHz is being added with this patch but is not included in the code, one of the lower frequency options will have to be dropped for the higher frequency option to be added. BRANCH=none BUG=chrome-os-partner:54144 TEST=run "stressapptest -M 1024 -s 3600" and pass on both kevin and gru. Verified that on Kevin the firmware reports starting up SDRAM at 300 MHz and on Gru at 800 MHz. Change-Id: Ie24c1813d5a0e9f0f9bfc781cade9e28fb6eb2f1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ef5e4551b79c3f0531f9af35491f2c593f8482f1 Original-Change-Id: I08bccd40147ad89d851b995a8aab4d2b6da8258a Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353493 Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/15309 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24rk3399: clean up sdram controller initialization codeVadim Bendebury
This is a purely cosmetic change replacing some of the more prominent copy and paste sections of the code with compressed versions of the same. BRANCH=none BUG=none TEST=with the rest of the patches applied stressapptest still runs for an hour on both Kevin and Gru. Change-Id: I492e1898e312473d07d9e5eceb3e3e10b48ee35f Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: eb8043f96457d090dbbee57097bc1d685e7d32d2 Original-Change-Id: I362e0e261209ae4d4890ecb0e08bb1956c172ffd Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353774 Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/15308 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Add elog supportSimon Glass
Add code to start up elog. This uses the EC RTC to obtain the timestamp. BUG=chrome-os-partner:52220 BRANCH=none TEST=boot on gru with CONFIG_ELOG_DEBUG enabled and see elog messages Change-Id: I4971d661b267ae8b7e3befeff482ca703b741743 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e4e9823d8cecbf9873e78b048e389c7a737ff512 Original-Change-Id: I0fcf55b3feccf9a0ad915deb6d323b65bf2e9811 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353822 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15306 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Add get_developer_mode_switch()Simon Glass
Add this function and make it return 0, as there is no physical dev switch (at least I think this is what we are supposed to do). This is needed for elog to work, which is needed so we can test RTC properly. BUG=chrome-os-partner:52220 BRANCH=none TEST=boot on gru with CONFIG_ELOG_DEBUG enabled and see elog messages: elog_init() SF: Detected W25Q64 with sector size 0x1000, total 0x800000 elog_find_flash() FMAP: area RW_ELOG found @ 5d8000 (32768 bytes) elog_scan_flash() elog_is_buffer_clear(base=0x000000000031d668 size=4096) ELOG: flash area invalid elog_flash_erase(address=0x000000000031d668 offset=0x005d8000 size=4096) SF: Successfully erased 4096 bytes @ 0x5d8000 elog_prepare_empty() elog_flash_write(address=0x000000000031d668 offset=0x005d8000 size=8) elog_scan_flash() elog_is_buffer_clear(base=0x000000000031d668 size=4096) elog_is_header_valid() elog_update_event_buffer_state() elog_is_buffer_clear(base=0x000000000031d670 size=4088) elog_is_area_valid() ELOG: FLASH @0x000000000031d668 [SPI 0x005d8000] ELOG: area is 4096 bytes, full threshold 3834, shrink size 1024 elog_add_event_raw(type=16) out: cmd=0x44: 03 b9 44 00 00 00 00 00 in-header: 03 3f 00 00 04 00 00 00 in-data: 6e 4c 00 00 elog_flash_write(address=0x000000000031d670 offset=0x005d8008 size=11) ELOG: Event(16) added with size 11 elog_add_event_raw(type=17) out: cmd=0x44: 03 b9 44 00 00 00 00 00 in-header: 03 3f 00 00 04 00 00 00 in-data: 6e 4c 00 00 elog_flash_write(address=0x000000000031d67b offset=0x005d8013 size=13) ELOG: Event(17) added with size 13 elog_add_event_raw(type=A0) out: cmd=0x44: 03 b9 44 00 00 00 00 00 in-header: 03 3f 00 00 04 00 00 00 in-data: 6e 4c 00 00 elog_flash_write(address=0x000000000031d688 offset=0x005d8020 size=9) ELOG: Event(A0) added with size 9 elog_add_boot_reason: Logged dev mode boot I can't actually see the timestamp, but the EC traffic is visible. Change-Id: I82bcf296dce4f4d146edf90b23bfae955fbe9e3a Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ffc7a7e0e7b136144d2a0b2ed21a543eafee49fa Original-Change-Id: I1489c6b874cc49495635aec0bf303f7098455716 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/353821 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15305 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Show the current time on start-upSimon Glass
Display the current time from the EC. BUG=chrome-os-partner:52220 BRANCH=none TEST=(partial) boot on gru and see output: Date: 1970-01-17 (Saturday) Time: 1:42:44 Then reboot ~10 seconds later and see output: Date: 1970-01-17 (Saturday) Time: 1:42:53 Change-Id: I4288efc56f00e47f7575d0379a44871351da6200 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: d0361193e0ec135e21f0611d7fa6e5c02f2b2bfc Original-Change-Id: I04a072c788ba3fc915e6d73703f966955bbd3e7e Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/351783 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15304 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24gru: Enable EC-based RTCSimon Glass
Obtain the real-time clock value from the EC on start-up and show the current time. BUG=chrome-os-partner:52220 BRANCH=none TEST=(partial) with future commits and EC clock set, boot on gru into Linux shell and check the firmware log: localhost ~ # grep Date: /sys/firmware/log Date: 2016-06-20 (Monday) Time: 18:09:16 Change-Id: Id3ef791f546419c4881a891251cbb62d7596884b Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 348e9373b0e95a17f5c39ec28a480712e6e45caf Original-Change-Id: Iff43b16a86d9fee483420ee2eff5ff3d276716a3 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/351781 Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15303 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24region: Add writeat and eraseat supportAntonello Dettori
Implement writeat and eraseat support into the region_device_ops struct. Change-Id: Iac2cf32e523d2f19ee9e5feefe1fba8c68982f3d Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/15318 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-24soc/apollolake: Clear SLP_TYP in PM1_CNTHannah Williams
Change-Id: Id49319ec6b52648b03eaeddfdd1580dd82110fb9 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/15336 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 14:57:33 +0000