summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-08-25lenovo/x230: Add subsystem ids.Vladimir Serbinenko
Change-Id: I917a89da50d8efe998c368ba46206f2a1c580fd0 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6756 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-25lenovo/t530: Be safe by disabling blink gpio hw with a writeoutEdward O'Callaghan
This disables the blink hardware as it seems to be in the dump. This is safer as it does not rely on 0 as the reset value when '0x00040000' is the default according to the util/inteltool. As seen: gpiobase+0x0018: 0x00040000 (GPO_BLINK) DIFF Change-Id: Ia1fde108bf3752484f5e991600c435f776af0ced Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6436 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-08-25sandybridge: Native gfx init.Vladimir Serbinenko
Change-Id: I07590086ffe3b1d068fa6ae6b156039cc2e55893 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6755 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-24lenovo/t530: Use GPIO defines specified in bd82x6x/pch.h headerEdward O'Callaghan
Use defines of offsets rather than hard coded values. Change-Id: Id2471cd22aa402d74163473e48f86af9789cdaa7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6435 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-08-24lenovo/t530/romstage.c: Trivial - move include to topEdward O'Callaghan
Change-Id: I6b80ad0da39e93072e28b48c40e1c71602133e7b Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6750 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-08-24lenovo/t520: replace dumped GPIO values with gpio.hNicolas Reinecke
GPIO pin wireing information from schematic Change-Id: I2d8dca151b6fbc15e0184ea07596039570843cda Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/6740 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-23lenovo/t520: fix devicetreeNicolas Reinecke
SATA Port documentation PCIe unused ports and documentation T520 have no keyboard backlight Change-Id: I517ff8519ea22a9a7a9b6e3136efd15d4a0f8fc4 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/6743 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-23lenovo/t520: fix usb config & documentationNicolas Reinecke
Change-Id: I71398ab2d7ef5b9256795861dd2bebbb0cf32d5f Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/6742 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-23ec/lenovo/h8/acpi/systemstatus.asl: Fix typo in o*n* in commentPaul Menzel
Change-Id: I655536f64faaa7e1600d4fec62ba80730e2cc45a Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/6674 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-23lenovo/t520: Remove empty smi.hNicolas Reinecke
Change-Id: I60fa19b72f91f16db5f354aeec631f661e3494d3 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/6736 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-23lenovo/t520: Fix ExpressCard hotplugNicolas Reinecke
Thinkpad T520 ExpressCard Slot PCIe lanes are connected to port 4. Tested with Serial Port Card. Information read from schematic / lspci Change-Id: I459943d427578d135f9aed1aa66da269ddfeee87 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/6735 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-23superio/smsc/sch4037: Cleanup and fix .c inclusionEdward O'Callaghan
Clean up both ram and rom stage support and fix board to match. Change-Id: I55e3e7338c0551f0fb663eb9707f16ecdc1aca35 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6509 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-08-23superio/smsc/sio1036: Fix hardcoded TTY0 base addr and .c includeEdward O'Callaghan
Compile romstage component as link-time symbols. Pass CONFIG_TTY0_BASE as argument instead of hard coding and playing funny business with the pre-processor. Fix board to match. Change-Id: If6d0d5389bd4e7765bb6056cf488c94fd45915c2 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6463 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-08-22ARM: Overhaul the ARM Makefile.Gabe Black
The ARM Makefile was copied from x86 and then modified, and as a result it was carrying a lot of baggage. On top of that, the extra complication made it inflexible, and we need a lot of flexiblity in order to support the fact that the Tegra124 starts on an ARMv4 coprocessor instead of one of the ARMv7 main CPUs. Change-Id: Ia6ddc27619bdb51e152ad0c628ad6f3037c103ce Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171017 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 512d942788336c8d52470135b43ee4e6a1c95f6c) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6709 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-08-22Remove dead video.aslVladimir Serbinenko
Change-Id: Iadaa6172347ebb7d367d1faa6ed9462fff07d7e6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6730 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-22lenovo/{x230,t530}: Remove empty smi.hVladimir Serbinenko
Change-Id: I26fa6508f50faff7f1c1724884b5ffa30463b896 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6728 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-22lenovo/x230: Remove empty mainboard.aslVladimir Serbinenko
Change-Id: Ic877d6285ce3983268b16ddb5b4e15743f5adf86 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6727 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-22lenovo/x200: Remove empty mainboard.aslVladimir Serbinenko
Change-Id: I560d693d0d72ca8dcd099eff6b0c40716fb0c0b0 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6726 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-22lenovo/x200: Move video ASL code to northbridge.Vladimir Serbinenko
Change-Id: I58760500252e78da947685c18201b6d446368333 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6729 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-22lenovo/x201: Remove empty mainboard.aslVladimir Serbinenko
Change-Id: I37d48279b1b022c4573bd09d3db6bf536d5dab9a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6724 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-22apple/macbook21: Remove useless seabios configVladimir Serbinenko
Change-Id: If771a84f25710e1fb2228816e3ca0139e2f95aa7 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6732 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-22lenovo/t530/mainboard.c: Add EC info to SMBIOSEdward O'Callaghan
As is in: 91175bb lenovo/x201 & x230: Add EC info to SMBIOS This is needed for the Linux driver for the Lenovo's to properly attach. Change-Id: Ib910b25f392d9d3d6362b6909ce9fd4eeae9a096 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6399 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-21Merge LCD on nehalemVladimir Serbinenko
Change-Id: I09852ea56495da17e7607064d74d98f2296f34b1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6721 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-21Merge LCD on sandy/ivyVladimir Serbinenko
Change-Id: Ibf66d46f47fe465cc805f85de818a77327cd7258 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6722 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-21i945: Support text mode gfx initVladimir Serbinenko
Change-Id: I952fdb113e2696785695b416d9292b7107099994 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6723 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-21i945/gma: don't map the page tableVladimir Serbinenko
Change-Id: I20fb5323cde1f83a3d3adc98251b2f31de25ed24 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6718 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-21i945: Remove GTT avoidance offset.Vladimir Serbinenko
Not needed anymore with GTT at the end of range. Change-Id: I57b02c7d605d3c43ac92bd744bb6472e3c3471e2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6717 Tested-by: build bot (Jenkins) Reviewed-by: Francis Rowe <info@gluglug.org.uk> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-21arm: Get rid of the INTERMEDIATE variable used on exynos.Gabe Black
The INTERMEDIATE variable was used to hook dd-ing the BL1 into the image for Exynos SOCs, but we can do that directly without having a special hook. Change-Id: I434506b52ca4ea1d01e25a785cbfe66dfdea21c4 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/170921 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 8db03c387ad654227d064e2a7fa5ecf09d07e3c5) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6714 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-08-20intel/i945/gma: Place GTT below top of memoryPaul Menzel
Since commit 17fec8a0 [1] drm/i915: Use Graphics Base of Stolen Memory on all gen3+ present in the Linux kernel since version 3.12, 3D does not work anymore [2]. Comparing the graphics registers, in this case that means output of `intel_reg_dumper`, the vendor Video BIOS is setting the register PGTBL_CTL/PGETBL_CTL, only documented in the i965 datasheet [3], to `0x3ffc0001` on a system with 1 GB of RAM, while native graphics init sets it to `0x3f800001`. Currently native graphis init sets the GTT right above the base address of stolen memory. The Video BIOS sets it below the top of memory. The Linux Intel driver expects it to be below top of memory, so do it this way, by setting the address to TOM minus the size of the GTT, which is hardcoded to 256 KiB. As `PGETBL_CTL` is zero by default, reading its value in the beginning is not necessary and is only confusing. Make it clear that the code calculates the value. There is still a PTE error reported during boot, but 3D works with Linux 3.12+ and no user visible problems are shown. [1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=17fec8a08698bcab98788e1e89f5b8e7502ababd [2] https://bugs.freedesktop.org/show_bug.cgi?id=79038 [3] https://01.org/linuxgraphics/sites/default/files/documentation/965_g35_vol_1_graphics_core_0.pdf Intel ® 965 Express Chipset Family and Intel ® G35 Express Chipset Graphics Controller Programmer’s Reference Manual Volume 1: Graphics Core Revision 1.0a Change-Id: I0a5b04c2c5300f5056cb48075aa5804984bc9948 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Francis Rowe <info@gluglug.org.uk> Reviewed-on: http://review.coreboot.org/5927 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-08-19tegra124: Implement the tegra i2c driver.Gabe Black
This uses the packet mode of the controller since that allows transfering more data at a time. Change-Id: I8329e5f915123cb55464fc28f7df9f9037b0446d Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/172402 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 4444cd626a55c8c2486cda6ac9cfece4e53dd0d3) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6703 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-19tegra124: Implement driver code for the pinmux, pingroup controls, and GPIOs.Gabe Black
The pins on tegra are controlled by three different units, the pinmux, the pin group controls, and the GPIO banks. Each of these units controls some aspect of the pins, and they layer together and interact in interesting ways. By default, the GPIOs are configured to pass through the special purpose IO that the pinmux is configured to and so can be ignored unless a GPIO is needed. The pinmux controls which special purpose signal passes through, along with pull ups, downs, and whether the output is tristated. The pingroup controls change the parameters of a group of pins which all have to do with a related function unit. The enum which holds constants related to the pinmux is relatively involved and may not be entirely complete or correct due to slightly inconsistent, incomplete, or missing documentation related to the pinmux. Considerable effort has been made to make it as accurate as possible. It includes a constant which is the index into the pinmux control registers for that pin, what each of the functions supported by that pin are, and which GPIO it corresponds to. The GPIO constant is named after the GPIO and is the pinmux register index for the pin for that GPIO. That way, when you need to turn on a GPIO, you can use that constant along with the pinmux manipulating functions to enable its tristate and pull up/down mode in addition to setting up the GPIO controls. Also, while in general I prefer not to use macros or the preprocessor when writing C code, in this case the set of constants in the enums was too large and cumbersome to manage without them. Since they're being used to construct a table in a straightforward way, hopefully their negative aspects will be minimized. In addition to the low level functions in each driver, the GPIO code also includes some high level functions to set up input or output GPIOs since that will probably be a very common thing to want to do. Old-Change-Id: I48efa58d1b5520c0367043cef76b6d3a7a18530d Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171806 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 5cd9f17fe0196d13c1e10b8cde0f2d3989b5ae1a) tegra124: Add base address for the pinmux and pingroup registers. There weren't any constants for the pinmux or pingroup registers in the address map header. Old-Change-Id: I52b9042c7506cab0bedd7a734f346cc9fe4ac3fe Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/172081 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 79b61016bfd702b0ea5221658305d8bd359f4f62) Squashed two related commits. Change-Id: Ifeb6085128bd53f0ef5f82c930eda66a2b59499b Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6702 Tested-by: build bot (Jenkins)
2014-08-19tegra124: Pick addresses to load the rom and ram stages.Gabe Black
If these aren't set, the rom and ram stages will attempt to load at address zero which doesn't work. Change-Id: I0b9b37d6363e6b208248d8a1af6ebee4db602486 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/173540 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Tested-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Ronald Minnich <rminnich@chromium.org> (cherry picked from commit 6ac5cea39d423bfcf5bbd53c2cc6228ab89f08b2) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6704 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-19asrock/imb-a180/board_info.txt: add flash fieldsStefan Tauner
Change-Id: Ie686d20811f33c620156c149315807343dde7784 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/6700 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-08-19macbook21: Support wake on LIDVladimir Serbinenko
Change-Id: Ifa1045abc761bef05977a8020cf6f18db042ad58 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6699 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Francis Rowe <info@gluglug.org.uk> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-19lenovo/x20[01]: Don't undock on disconnecting of power from dock stationVladimir Serbinenko
Change-Id: Id55bf259d5af187ba718de7e367395adcfc567b4 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6707 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-19lenovo/x201: Fix dock recognitionVladimir Serbinenko
Change-Id: I8b210786f660e2b2bae0d9ddd594386fd107cbe4 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6706 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-19lenovo/x201: Unpower USB on undockingVladimir Serbinenko
Change-Id: I9b496e8ff92ee575d0b780eab0cb45ea05506d30 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6708 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-19lenovo/x200: Dock supportVladimir Serbinenko
Change-Id: I4e25630ae82e8030a9d6bfccb60844c301b1d635 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6705 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-18trustzone: Pull trustzone init out of cpu.c and do it in romstage.Gabe Black
Trustzone needs to be initialized/disabled both on boot and on wake, so it needs to be done before ramstage which doesn't run on wake. cpu.c isn't compiled into romstage and fixing that causes other problems, so the trustzone functions were split out. Change-Id: I8fc630237ebec1f02a91600f8baf3d4e9ea66d0e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/169817 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 055ed0e28476123b0bd666109af90baf40aadcee) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6666 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-18tegra: Change how tegra124 and tegra include files from each other.Gabe Black
A problem with including the tegra124 directory directly in the include path is that it makes all headers in that directory first level headers available everywhere including places that have nothing to do with the SOC, even headers which were only intended for local use by tegra124 code. This change modifies things a bit to be more like the way the arch headers are chosen. In the tegra124 directory, there's an include directory which has an soc subdirectory in it. That include directory is added to the include path, making it possible to have headers private to the tegra124. When files specific to whatever tegra is being built for are needed, you can include <soc/foo.h> and get the version specific to that particular soc. Also, the soc.h header file was overhauled to use enums instead of defines, to consistently name things as far as their prefix (the less cryptic TEGRA instead of NV_PA) and suffixes like "BASE", and to get rid of values which were specific to U-Boot which we don't need. Since the only thing in the file were address constants, I also renamed the file addressmap.h. It would be included as: <soc/addressmap.h> which I think is easy to remember, does what you'd think it does from the name, and won't conflict with other header files just minding their own business in some other directory. Change-Id: I6a1be1ba28417b7103ad8584e6ec5024a7ff4e55 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/172080 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Ronald Minnich <rminnich@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 2c554f58f9ee18e151e824f01c03eb3f0e907858) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6659 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-18exynos5420: Don't map low addresses that lead nowhereJulius Werner
I just spent half a day (including the time to implement a stack dumper) to figure out that I am reading from a NULL pointer. A problem this simple should be more easy to catch. Let's mark the address range below SRAM as uncached so that the MMU can yell at you right away for being the bad programmer you are when you access a NULL pointer. Change-Id: I4a3a13f75bf21b25732be2ecb69d47503eff1b53 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170112 Reviewed-by: Ronald Minnich <rminnich@chromium.org> (cherry picked from commit 7316732ea0ccdc0d607bde81dbb38ca9abd29fa9) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6650 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-18arm/exynos: Allow releasing UART retention for resume.Hung-Te Lin
The UART / serial console is put in retention state by kernel during suspend / resume path, which caused Coreboot not able to print any messages during resume. Sending values to the padret_uart_opt inside PMU may release UART, but that may also cause unexpected output when kernel is back. However, it's still very helpful when we are debugging suspend/resume inside Coreboot. To get UART message on resume, call wakeup_enable_uart() in boot block or romstage (before console_init). Change-Id: Ib5759cb402c6e018d9dba14fad8b61f6a1b1a265 Reviewed-on: https://chromium-review.googlesource.com/170440 Tested-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 547fbbfe2eeb6da4e161f36be2caf8099f9eac9b) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6649 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-18exynos5: Implement support for USB 3.0 DRD PHYs/controllersJulius Werner
This patch adds support for the DesignWare3 USB 3.0 DRD controller and PHY to the Exynos5250 and Exynos5420 CPUs. It also adds code to the Google Snow and Pit boards to turn these controllers on where applicable. Change-Id: Idcca627363a69f1d65402e1acb9a62b439f077ff Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169452 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit e9809ae12ef8b8bd6cd61d3f604cb9e4718cf7eb) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6642 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-18console: conditionally include console in bootblockStefan Reinauer
Right now some console specific objects are included in the bootblock even if CONFIG_BOOTBLOCK_CONSOLE is disabled while others are not. Make all of them conditional and also fix a preprocessor misuse in bootblock_simple.c and a stray (useless) die() in the Exynos wakeup code that made inclusion of those files necessary. Change-Id: Ia7f9d17654466f199b0e13afbdc9e14c9706530f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/168772 Reviewed-by: David Hendrix <dhendrix@chromium.org> (cherry picked from commit 855da1f07b52898c7edcaffe5baabe9d485bbd83) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6637 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-08-18macbook11: New mainboard (macbook21 clone)Vladimir Serbinenko
Tested by marcus. Change-Id: Ifce2018ef49619b36fb07e5345d70c358a0397e4 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6698 Tested-by: build bot (Jenkins) Reviewed-by: Francis Rowe <info@gluglug.org.uk> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-18azalia: Move shared variable to separate fileVladimir Serbinenko
Change-Id: Icf46ad1397c67478887c80a627b8f4eb0a67e542 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6695 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-18mainboard/intel/mohonpeak: code cleanupMartin Roth
Code cleanup requested in commit 90957f88 - "mainboard/intel: Add Mohon Peak CRB for Intel's atom c2000" - Change com2 to COM2 in Kconfig text - clean up includes of headers - fix whitespace Change-Id: I828bc4781ee7de95be5546206c5d6033b75293d9 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6607 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-18southbridge/intel/fsp_rangeley: fix to include irqroute.h twiceMartin Roth
This matches what was done on baytrail in commit bfca984b - soc/intel/fsp_baytrail: set up for including irqroute.h twice irq_helper.h intentionally gets included into irqroute.asl twice - once for pic mode and once for apic mode. Since people are used to seeing guard statements on the .h files, add the guards to irqroute.h and add a comment to irq_helper.h explaining why they aren't there. Change-Id: I709f9370ce7db1b3ffac2297aeaba5cc670ec20c Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6606 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-18mainboard/XXX/YYY/dsdt.asl: Whitespace fixMartin Roth
Use tab between "COREBOOT", and comment. This fix was requested in 90957f88 - "mainboard/intel: Add Mohon Peak CRB for Intel's atom c2000" Change-Id: If9fb6158cca95341ab57db1125e85648b616b72c Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6601 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-18cpu/intel/fsp_model_406dx: code cleanupMartin Roth
Code cleanup requested in commit 09670265 - "cpu/intel: Add fsp version of model 406dx (Rangeley / Atom C2000)" - add guard statements to chip.h - remove excessive includes - whitespace cleanup - add an IS_ENABLED Change-Id: Iaa85bd66953df015f083b23f6fd32949bcfd17bc Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6599 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 05:24:33 +0000