summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2013-08-15AMD Kabini: Split DSDT into common sectionsMike Loptien
Split the Family16 (Kabini) DSDT file into logical regions. Olive Hill is the only mainboard and Kabini is the only NB/CPU currently using Family16 AGESA code. Change-Id: I9ef9a7245d14c59f664fc768d0ffa92ef5db7484 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/3821 Tested-by: build bot (Jenkins)
2013-08-13dmp/vortex86ex: Initialize Reatek ALC262 audio codecAndrew Wu
Hook this up into the DMP Vortex86EX. Before under Windows XP the microphone did not work. With the new logic it does. Now line-in,line-out and microphone all work. The verb data table is generated by Realtek. Change-Id: I1bcef898a15547c86c12c4b52ce0069d13e23c84 Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3855 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-08-13Add a generic Intel HD audio (Azalia) module azalia_device.cAndrew Wu
This module uses cim_verb_data to detect and initialize HD audio codecs. The module source code is based on southbridge/intel/sch/audio.c and southbridge/nvidia/mcp55/azalia.c. Change-Id: I810fef6fdcf55d66f62da58c3d7d99f006559d6e Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3844 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-08-13Fix some wait_for_valid functions return value from 1 to -1.Andrew Wu
codec_init expects wait_for_valid returns -1 for timeout, not 1. Change-Id: I0f2a3ebb1934d0adaf13765434526bbc9efca9a3 Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3843 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-08-10usbdebug: Add option for verbose logging of connectionKyösti Mälkki
Add option to log changes in USB 2.0 EHCI debug port connection. For romstage move usbdebug as the last initialised console so one actually can see these messages. Init order of consoles in ramstage is undetermined and unchanged. Change-Id: I3aceec8a93064bd952886839569e9f5beb6c5720 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3387 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-10usbdebug: Fix AMD cimx/sb700 cimx/sb800Kyösti Mälkki
These Kconfig entries were forgotten from the commit that re-enabled usbdebug for these southbridges. Change-Id: Ia17f1dd3340408da7c033c2c949404d2636bed44 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3849 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-08-09intel/sandybridge intel/bd82x6x: remove explicit pcie config accessesKyösti Mälkki
Now that MMCONF_SUPPORT_DEFAULT is enabled by default remove the pcie explicit accesses. The default config accesses use MMIO. Change-Id: I58c4b021ac87a035ac2ec2b6b110b75e6d263ab4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3810 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-08ASUS F2A85-M: Split DSDT into common sections (as per Parmer)Kimarie Hoot
Rearranged the F2A85-M DSDT file to match the functionality found on Parmer. As with the Parmer implementation, the F2A85-M dsdt.asl file in the mainboard directory contains only #include references to the appropriate files. As with Parmer, some include files have no content but are left as a template for other platforms and as placeholders for completing the ACPI implementation for F2A85-M. Change-Id: Ic72cb6004538ca9d9f79826b9b3c8d6aeb25017c Signed-off-by: Kimarie Hoot <kimarie.hoot@se-eng.com> Reviewed-on: http://review.coreboot.org/3805 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin@se-eng.com>
2013-08-08AMD Thatcher: Split DSDT into common sections (as per Parmer)Kimarie Hoot
Rearranged the Thatcher DSDT file to match the functionality found on Parmer. As with the Parmer implementation, the Thatcher dsdt.asl file in the mainboard directory contains only #include references to the appropriate files. As with Parmer, some include files have no content but are left as a template for other platforms and as placeholders for completing the ACPI implementation for Thatcher. Change-Id: Ie44a32959cc547840914365e872416d4624d33df Signed-off-by: Kimarie Hoot <kimarie.hoot@se-eng.com> Reviewed-on: http://review.coreboot.org/3804 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin@se-eng.com>
2013-08-07usbdebug: Support AMD cimx/sb700 cimx/sb800 once againKyösti Mälkki
Support code for sb700 and sb800 existed already, but Kconfig and compile-time issues prevented from enabling USBDEBUG for boards with the affected AMD southbridges. Change-Id: I49e955fcc6e54927320b9dc7f62ea00c55c3cedf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3439 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-08-07usbdebug: Use __SIMPLE_DEVICE__ on early enableKyösti Mälkki
With USBDEBUG selected, the file is built for both romstage and ramstage. For the ramstage build, we need to explicitly use the simple PCI config operations without devicetree. Change-Id: I2de8d9c77bb458ba797c3aac9e2cd0d653e06684 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3437 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-07Make EARLY_CONSOLE optionalKyösti Mälkki
This change brings back the possibility to disable console output while in romstage, like before commit d2f45c65. For some platforms (AMD multi-socket) USBDEBUG and/or CBMEM CONSOLE do not work correctly for romstage due the way cache-as-ram is set up, but might already work for ramstage. Change-Id: Id8d830e02a18129af419d3b5860866acf315d531 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3846 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-06AMD AGESA: Fix comment for `PCIE_DDI_DATA_INITIALIZER`Paul Menzel
Copied from a similar commit for Family 10h AGESA [1] Remove the fourth argument in the comments. Luckily the compiler, at least gcc, warns about a wrong number of arguments, and therefore no incorrect code resulted from the wrong documentation. [1] 07e0f1b AMD AGESA: Fix argument list for `PCIE_DDI_DATA_INITIALIZER` in comments [2] fc47bfa Revert "AMD f14 vendorcode: Fix warning" Change-Id: I3806e368a823e4a40d22e99b91bf3598d9ed2f15 Signed-off-by: Bruce Griffith <bruce.griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3840 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin@se-eng.com>
2013-08-06AMD AGESA: Add missing breaks to switch statement in one fileBruce Griffith
This is the same patch as an earlier one applied to family 15 [1]. Static analysis often flags case statements that do not include a terminating "break;" statement. Eclipse's CODAN is an example of this. This changelist modifies amdlib.c to terminate case statements with "break;". [1] e44a89f amd/agesa/f15/Lib/amdlib.c: Add missing breaks ... Change-Id: Ibd1ae6f2b52fde07de3d978d174975f4d93647ab Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3839 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin@se-eng.com>
2013-08-06AMD Olive Hill: Enable WARNINGS_ARE_ERRORS (remove override)Bruce Griffith
Change-Id: Idf26eb3fb541355bd9553c1897f647738c347eb5 Signed-off-by: Bruce Griffith <bruce.griffith@se-eng.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3819 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-08-06AMD Olive Hill: Change SB800 references to YangtzeBruce Griffith
Change-Id: I7f6f6ff444fda4bdf233db1383919772afe6b635 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3815 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin@se-eng.com>
2013-08-06AMD Olive Hill: Add HUDSON_LEGACY_FREE flagBruce Griffith
Olive Hill does not have a Super I/O or keyboard controller. Change-Id: I8c1e5d8c20c4a964fe8d98df920b416382a26d9d Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3848 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin@se-eng.com>
2013-08-06AMD Olive Hill: Remove default VBIOS vendor/device IDBruce Griffith
The VBIOS device ID is set by processor family using the map_oprom_vendev() function in the northbridge code. There is rarely a reason why this should be overridden by the mainboard. Since Kabini includes a default VBIOS vendor/device ID in the northbridge Kconfig code, remove the setting from the Olive Hill mainboard settings. Change-Id: Icd69155f5b51105d564dd82c89e4bb54a6118a82 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: Bruce Griffith <bruce.griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3816 Tested-by: build bot (Jenkins)
2013-08-06AMD Kabini: Add "const" modifier to AGESA function parametersBruce Griffith
Add CONST modifiers to read-only pass-by-reference function parameters in AGESA. This allows the use of "const" modifiers on the declaration of lookup tables that are pass-by-reference. These will be used to identify tables that are copied onto the HEAP but don't need to be. This same change was made for AMD Trinity APUs (Family15tn) [1]. [1] 283ba78 AGESA: Add "const" modifier to function parameters Change-Id: I2bdd9fc5e027e938de9df0f923b95da934bb48dc Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: Bruce Griffith <bruce.griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3837 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-08-05AMD SATA: Correct "them implement" to "then implement" in commentsPaul Menzel
This changelist was cherry-picked from merged community code for Parmer [1] and the paths modified so that the Parmer modification is applied against Olive Hill. [1] 0086162 AMD SATA: Correct _them implement_ ... in comments Change-Id: I9849e9a75dacfde15331c4200d72343a59036f14 Signed-off-by: Bruce Griffith <bruce.griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3841 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-08-05AMD Kabini: Add map_oprom() function for Vendor/Device IDsBruce Griffith
Change-Id: I14285f0677003fbf8b9b112207af202658807894 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Bruce Griffith <bruce.griffith@se-eng.com> Tested-by: Bruce Griffith <bruce.griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3806 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-08-05AMD Olive Hill: Enable HDMI audio setting in build optionsBruce Griffith
Change-Id: Ifc180e6fcd594dbedc2512ea5bef283a3ad689d3 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: Bruce Griffith <bruce.griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3814 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-08-05AMD Olive Hill: Eliminate unnecessary memory copyBruce Griffith
Eliminate an unnecessary copy of the DDI descriptor list and the PCIe port descriptor list. As descriptor tables, these tables do not need dynamic updating and should be used from ROM without runtime copying. There will be a corresponding patch for AGESA that adds CONST modifiers to function parameters that are pass-by-reference "IN" values (read-only pointers). Change-Id: I7ab78e58041e9247db22d0f97a6f76d45f338db0 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: Bruce Griffith <bruce.griffith@se-eng.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3818 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-08-05AMD Olive Hill: Add new AMD mainboard using Kabini processorSiyuan Wang
Change-Id: I1f252b67c039d28df96e8dfd458a1ca6a7dbc816 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-by: Bruce Griffith <bruce.griffith@se-eng.com> Tested-by: Bruce Griffith <bruce.griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3784 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-08-05AMD Hudson/Yangtze: Enable support for SATA port multipliersBruce Griffith
This patch sets a bit in the Yangtze southbridge to enable the extra protocol necessary to handle port multiplier chips. This has been turned on during most of Kabini development without any notable impact. Olive Hill has an optional daughter board that incorporates Silicon Image Steel Vines chips. This change has been tested with and without the daughter board. This change can be regression tested using any Hudson-based motherboard, although it has no impact on boards with discreet Hudson/Bolton southbridges. This was tested for impact on SATA performance in the absence of a port multiplier using the IOZone benchmarks within the Phoronix Test Suite. A SATA 3 hard drive (6.0 Gbps) and an SSD were connected to the ports on Olive Hill without using the port multiplier card. The test results contained more run-to-run variation within the same configuration than was seen in the aggregate results comparing the interface with and without the port multiplier protocol additions. In other words, the test had less accuracy than the impact caused by turning on port multiplier support. Change-Id: Ie87873b093f3e2a6a5c83b96ccb6c898d3e25f72 Signed-off-by: Bruce Griffith <bruce.griffith@se-eng.com> Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3808 Tested-by: build bot (Jenkins)
2013-08-05AMD Kabini: Modify Hudson southbridge to support new AMD processorSiyuan Wang
Yangtze uses Hudson AGESA wrapper code but has some changes. The changes are necessary and have no effects on Hudson. Change-Id: Iada90d34fdc2025bd14f566488ee12810a28ac0d Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: Bruce Griffith <bruce.griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3783 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-08-05AMD Kabini: Add northbridge AGESA wrapper (new AMD processor)Siyuan Wang
src/arch/x86/boot/tables.c and src/include/device/pci_ids.h are also changed because these two files depend on F16kb northbridge macros Change-Id: Iedc842f0b230826675703fc78ed8001a978319c5 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Bruce Griffith <bruce.griffith@se-eng.com> Tested-by: Bruce Griffith <bruce.griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3782 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-08-05AMD Kabini: Add CPU AGESA wrapper for new AMD processor familySiyuan Wang
Change-Id: I4a1d2118aeb2895f3c2acea5e792fbd69c855156 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Mike Loptien <mike.loptien@se-eng.com> Tested-by: Bruce Griffith <bruce.griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3781 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-08-04AMD Kabini: Add AGESA/PI code for new processor familySiyuan Wang
Change-Id: Icb6f64e2e3cfd678fb4fb4f13f0e4b678d5acc4a Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-by: Nick Dill <nick.dill@se-eng.com> Tested-by: Bruce Griffith <bruce.griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3836 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-08-02Remove unnecessary space characters.Andrew Wu
Change-Id: I4ed9329126b216eb4ae58355672603ce79a6d4ef Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3847 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-08-01intel/lynxpoint: remove explicit pcie config accessesKyösti Mälkki
Now that MMCONF_SUPPORT_DEFAULT is enabled by default remove the pcie explicit accesses. The default config accesses use MMIO. Change-Id: I71923790aa03e51db01ae3a4745e1c44556d281f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3812 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-01Add directive __SIMPLE_DEVICE__Kyösti Mälkki
The tests for __PRE_RAM__ or __SMM__ were repeatedly used for detection if dev->ops in the devicetree are not available and simple device model functions need be used. If a source file build for ramstage had __PRE_RAM__ inserted at the beginning, the struct device would no longer match the allocation the object had taken. This problem is fixed by replacing such cases with explicit __SIMPLE_DEVICE__. Change-Id: Ib74c9b2d8753e6e37e1a23fcfaa2f3657790d4c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3555 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-31Drop unused EXTERNAL_MRC_BLOBStefan Reinauer
The Kconfig variable EXTERNAL_MRC_BLOB is not used. Drop it. Change-Id: I3caa5c2b6bcf5d2c13b6987da8ab3987bad0e506 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3829 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2013-07-30Makefile: Fix adding intel/commonKyösti Mälkki
Directory intel/common must be conditionally added in the list of source directories, as the parent directory southbridge/intel is unconditionally added even for boards without such device. Change-Id: I7088bc6db9f56909ffa996aa7eff76cd72e177eb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3827 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-30usbdebug: Fix missing includeKyösti Mälkki
Change-Id: I74d28c13e6597c56e3b85ccd2b83386b86c200f0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3828 Tested-by: build bot (Jenkins)
2013-07-30cpu/intel/model_67x: Add missing includeKyösti Mälkki
The added device.h file was indirectly picked from cpu.h, which will have this include removed in a follow-up patch. Change-Id: Ifc0a4800de3b1ef220ab1034934f583be8c527b0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3826 Tested-by: build bot (Jenkins)
2013-07-29kontron/ktqm77: Update cmos checksum rangeNico Huber
Change-Id: I08e56b4a1c56128c6d4beb751979c5b99cdae829 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3790 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-29ec/kontron/it8516e: Add sanity checks for values from nvramNico Huber
Change-Id: Ie52d80fc8657064efdcec51c31dc9309fcc28121 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3787 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-29ec/kontron/it8516e: Comment low-level EC functionsNico Huber
Change-Id: I5f75998356554e08f8c9920e7612494e4710ab15 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3786 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-29ec/kontron/it8516e: Remove some unsafe bit shiftingNico Huber
The EC expects the temperature in 64ths degree C. Alter it8516e_set_fan_temperature() to just export this interface and make the calculation more obvious. Change-Id: Ibe241b7909f4c02b30b1e1200a1850d47695a765 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3785 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-29kontron/ktqm77: Squeeze more fan options into cmos.layoutNico Huber
Change-Id: Ic660efec519a9a970ec5a8832fd1dd8c9516318f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3775 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-29ec/kontron/it8516e: Add PWM limits optionNico Huber
Add an option to set minimal and maximal PWM percentages when the fan is in temperature controlled mode. Also fix a non-ascii flaw. Change-Id: I85ae244bee2145bf17d6c29e93dd4871540985c8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3774 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-29ec/kontron/it8516e: Correct fan setting for PWM modeNico Huber
The EC firmware expects a 255th while we provide a percentage. Change-Id: Ib06a061b431ac728329043179800729e39e6166b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3773 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-29ec/kontron/it8516e: Add option for external temperature sensorNico Huber
The IT8516E firmware of Kontron supports some selected external sensors attached to the EC via SMBUS or GPIO16. Change-Id: I4c451c360a393e916430e3bea04a95847455cef7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3772 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-26AMD Parmer: Fix file permissions on asl files in mainboardKimarie Hoot
Removed the execute bit on all files in mainboard/amd/parmer/acpi Change-Id: I85ffa66e0beb9c4bfe826b72968f7f633c224487 Signed-off-by: Kimarie Hoot <kimarie.hoot@se-eng.com> Reviewed-on: http://review.coreboot.org/3807 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-07-26emulation/qemu-q35: Use MMCONF_SUPPORT_DEFAULTKyösti Mälkki
Change all PCI configuration accesses to MMIO in qemu-q35 emulation To enable MMIO style access, add (move) explicit PCI IO config write in the bootblock. As there is no northbridge/x/x/bootblock.c file, a mainboard/x/x/bootblock.c file is added for this purpose. Change-Id: I979efb3d9b2f359a9ccbd1b4f6c05f83bab43007 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3599 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-25Redefine pci_bus_default_ops as functionKyösti Mälkki
Taking device_t as a parameter, this allows to alter the PCI config access handlers. This is useful to add tracing of PCI config writes for devices having problems to initialise correctly. On older AMD platform PCI MMIO may not be able to fully configure all PCI devices/nodes, while MMIO_SUPPORT_DEFAULT would be preferred due to its atomic nature. So those can be forced to IO config instead. Change-Id: I2162884185bbfe461b036caf737980b45a51e522 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3608 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-24usbdebug: Split endpoint buffersKyösti Mälkki
Refactor the structure to better support receive and another set of endpoints over usbdebug. Change-Id: Ib0f76afdf4e638363ff30c67010920142c58f250 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3726 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-22X86: make the SIPI num_starts a config variableRonald G. Minnich
The code to figure out how to set num_starts was starting to get kludgy. It's a constant for a given CPU; constants should be constant; make it a config variable. This change includes an example of how to override it. Build but not boot tested; drivers welcome. Change-Id: Iddd906a707bb16251615c7b42f2bfb5a044379b4 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3796 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-07-20it8728f: Add ITE IT8728F superio early serial support.Damien Zammit
This is the first of a series of patches to provide support for a new mainboard, Gigabyte GA-B75M-D3V. This patch provides early serial for the superio and has been tested on this mainboard. The code is based on IT8718F superio. Change-Id: I5636199b49314166ed3b81e60b41131964dd44ff Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/3794 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 10:02:36 +0000