summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2018-07-11skylake: Remove "IshEnable"li feng
Remove "IshEnable" from soc_intel_skylake_config since it's not used anymore. Enable/disable ISH by checking if ISH device is turned on or not. Refer to https://review.coreboot.org/#/c/coreboot/+/26485/. BUG=b:79244403 BRANCH=none TEST=Built. Change-Id: I4d2889af118659852431c87cb516fd19b577efc5 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-11mainboard/google/poppy/variants/atlas: config ISH in mainboard sideli feng
To enable ISH device on atlas board, change "device pci 13.0 off end" to "device pci 13.0 on end" in file mainboard/google/poppy/variants/atlas/devicetree.cb. "IshEnable" is not needed. Config atlas board specific ISH setting in devicetree.cb. Dynamically load gpio setting for ISH enabled/disabled cases. BUG=b:79244403 BRANCH=none TEST=Verified on Atlas board with ISH rework. ISH log showed on console. Change-Id: I8269a85cd2ab7917bfc0e7d63d988e0e678d0bf2 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-11mediatek/mt8183: add PLL and clock init supportWeiyi Lu
Add PLL and clock init code. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui. Checked with frequency meter in SOC. Change-Id: I1f561f66bcf12de6a95c2f64eecd9508bd9bb26c Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-on: https://review.coreboot.org/27031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-11mediatek: Share PLL code among similar SOCsTristan Shieh
Refactor PLL code which will be reused among similar SOCs. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Elm Change-Id: I11f044fbef93d4f5f4388368c510958d2b0ae66c Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27305 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-11google/kukui: Update MMU table in romstage and ramstageTristan Shieh
In order to get better performance, map dram as cached after dram ready in romstage. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui. Need a futher check after dram calibration code ready. Change-Id: Ie541fe08ee1d5b260abbabc0a5c18fb04e602b9c Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27304 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-11mediatek/mt8183: Add MMU operation supportTristan Shieh
Enable MMU in bootblock for performance, link common code to provide mtk_mmu_after_dram() to update MMU table in romstage after dram ready, implement mtk_soc_disable_l2c_sram(), and call mtk_mmu_disable_l2c_sram() to turn off L2C sram in ramstage. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui. Change-Id: I4e35f8276ca23de7fd13da3515b9f48d944ead32 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-11mediatek: Share MMU operation code among similar SOCsTristan Shieh
Refactor MMU operation code which will be reused among similar SOCs. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Elm Change-Id: Id8173da0a02e57e863263fcd89c91a9c089e8a0f Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-11mainboard/google/kahlee: Update existing SPD filesMartin Roth
Add an extra space after 8th value on each line to make it easier to count the values. Update the empty spd to remove two random 0x80 values. BUG=None TEST=None Change-Id: If330dbf0c133f65aedddc58ecb351a80b0e45a05 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/27423 Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-11mainboard/google/kahlee: Add additional SPDs for variantsMartin Roth
BUG=b:111079089, b:80375243 TEST=Build grunt, verify that SPDs are included. Change-Id: Idb03a3fa0842f7f89bb8c66dedbb8a0b293569be Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/27422 Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-11riscv: add support to check ISA extensionXiang Wang
Add support to check ISA extension for RISC-V. Change-Id: I5982fb32ed1dd435059edc6aa0373bffa899e160 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-07-10src/sb/amd/pi/hudson/sd.c: disable SDR50 tuning and set correct clock freq ↵Michał Żygowski
in SD2.0 mode According to BKDG for AMD Family 16h Models 30h-3Fh Processors SDR50 tuning should be disabled in 0xA8 register. Also fix clock frequency setting in 0xA4 for stepping >= A1 which caused reduced performance of SD cards transfer speed even by half. Change-Id: I80ca754b0c89e08aa90ff885467c7486a3efb999 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/27359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-10soc/cavium: Add secondary CPU supportPatrick Rudolph
Change-Id: I07428161615bcd3d03a3eea0df2dd813e08c8f66 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-07-10soc/cavium/cn81xx: Set cntfrq_el0Patrick Rudolph
Set cntfrq_el0 to provide correct timer frequency. Change-Id: I4b6d0b0cf646a066fc5a51552a1891eccbd91e5e Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25450 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-10mb/cavium/cn8100_sff_evb: Be verbosePatrick Rudolph
Print some useful information about the board. Change-Id: I0acac7a29290bc2eb9f4283317165fa0cf1b24e1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25449 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-10soc/cavium: Clean uart codePatrick Rudolph
* Only init UART_FOR_CONSOLE * Allow UART init with zero baudrate. * Init UART0..3 on Cavium's cn8100_sff_evb to fix kernel panic. Tested on CN8100_SFF_EVB. Change-Id: I1043b30318ec6210e2dd6b7ac313a41171d37f55 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-07-10soc/cavium: Enable MMUPatrick Rudolph
* Configure and enable MMU. * Cover the whole I/O space. * A minimum of 512KB TTB space is required. * Use secure mem attribute as firmware is running in ARM TZ region. Tested on Cavium SoC. Change-Id: I969446da62b4cc7adf9393fab69ff84ebf49220d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-07-10cavium: Add CN81xx SoC and eval board supportDavid Hendricks
This adds Cavium CN81xx SoC and SFF EVB files. Code is based off of Cavium's Octeon-TX SDK: https://github.com/Cavium-Open-Source-Distributions/OCTEON-TX-SDK BDK coreboot differences: bootblock: - Get rid of BDK header - Add Kconfig for link address - Move CAR setup code into assembly - Move unaligned memory access enable into assembly - Implement custom bootblock entry function - Add CLIB and CSIB blobs romstage: - Use minimal DRAM init only devicetree: - Convert FTD to static C file containing key value pairs Tested on CN81xx: - Boots to payload - Tested with GNU/Linux 4.16.3 - All hardware is usable (after applying additional commits) Implemented in future commits: - Vboot integration - MMU suuport - L2 Cache handling - ATF from external repo - Devicetree patching - Extended DRAM testing - UART init Not working: - Booting a payload - Booting upstream ATF TODO: - Configuration straps Change-Id: I47b4412d29203b45aee49bfa026c1d86ef7ce688 Signed-off-by: David Hendricks <dhendricks@fb.com> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/23037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-07-09src/southbridge: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: I72d50615d77b91529810e8f590fa56f3c6f7546c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-09src/soc: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: I21680354f33916b7b4d913f51a842b5d6c2ecef3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-09src/northbridge: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Iaf86a0c91da089b486bd39518e5c8216163bf8ec Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-09src/mb: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Iedc2e48349e40e94863c8080d11e11dbe6084c9d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-09src/{ec,include,lib}: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: I447aaa1850b7e8b514a8c4c04bf5b426d3d1cd0a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-09src/{device,drivers}: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Ic1c9b1edd8d3206a68854107ddcbc5c51cb487c3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-09src/{arch,commonlib,cpu}: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: I8e4118c5c5d70719ad7dc5f9ff9f86d93fa498ac Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26942 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-09soc/intel/skylake: config ISH in SOC sideli feng
Config ISH in SOC side by checking if ISH device is turned on. "IshEnable" is not needed anymore since ISH device on/off will tell if ISH should be enabled or not. "IshEnable" will be removed from chip.h in separate CL. Atlas board specific ISH setting is needed, which is committed in separate CL. BUG=b:79244403 BRANCH=none TEST=Verified on Atlas board with ISH rework. ISH log showed on console. Change-Id: I3fc8648b3e6551497617ef1ebd2889245cdd31c3 Signed-off-by: li feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/26485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-09ec/lenovo/h8/acpi: Add BDC interfacePatrick Rudolph
* Add SSDT generator to add dynamic ACPI code. * Implement GBDC and SBDC for thinkpad_acpi kernel module. Required for BDC power control from userspace. Tested on Lenovo T430: The bluetooth module is detected and can be powercycled using network manager. Change-Id: Ida825196650966194a883945896a038b0790fe45 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-06superio: move files to match the common naming schemeFelix Held
Change-Id: I1a8fc34aaaf42514c8af97ab155ff2712e7a5448 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/23009 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-06src: Add missing license headersMartin Roth
These two files were added before I was able to get the updated linter committed. Updated/Add the headers so the stable header lint check can be updated. Change-Id: I464ddecb5eebe8c5b907f3dcfeab1b06501af6ab Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/27362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-06riscv: use __riscv_atomic to check support A extensionXiang Wang
GCC pre-defined some macros for detecting ISA extensions. We should use these macros to detect ISA features. Change-Id: I5782cdd1bf64b0161c58d789f46389dccfe44475 Signed-off-by: XiangWang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-07-06google/grunt: Update Raydium TS device ACPI nodesKevin Chiu
change I2C irq to EDGE trigger BUG=b:110962003 BRANCH=master TEST=emerge-grunt coreboot Raydium TS is working. Change-Id: Iff3acf4199d23b29dff209ec1c03a731679c6cbe Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/27327 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-06mb/google/octopus: Enable tablet modeJustin TerAvest
This change configures ACPI to properly route notifications from the EC for tablet mode events to userspace. Relevant EC config changes are at: https://chromium-review.googlesource.com/c/chromiumos/platform/ec/+/1125261 BUG=b:111078678 TEST=With EC change, tablet mode detected by evtest and powerd Change-Id: Ifbc318186b195534f647f062544de4968aa87401 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/27346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-06ec/lenovo/h8/acpi: Move ACPI HKEY device to new filePatrick Rudolph
Move the APCI HKEY device to a new file and include it. The follow-up commits will extend it and this way it remains readable. Change-Id: Ie59b59e5a4148807125c71a362161026f685a97e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/22463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2018-07-06mb/google/poppy/variants/nocturne: fix FPMCU IRQ sensitivityVincent Palatin
the FPMCU_INT_L on GPP_C11 is active low but the kernel irq handler is defined as IRQF_TRIGGER_LOW, so do not invert it twice. BRANCH=poppy BUG=b:78613978 TEST=On Nocturne, the 'cros_ec' IRQ count in /proc/interrupts does not increment wildly. Change-Id: I56c13c797b133dd22669a2299bcd16ef14eed335 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/27221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-06mb/intel/d945gclf/romstage.c: Remove unneeded includesElyes HAOUAS
Change-Id: I3bdb93e51cabbfc14fe992ccdb6556e344e03c2f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-07-06mb/ibase/mb899: Remove unneeded includesElyes HAOUAS
Change-Id: Iee237206f309409be64307d2daee044da52a05e1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-07-06google: Use proper ACPI ID for Semtech chips: STHGwendal Grignou
Change-Id: I85cd567a923cccd2504f351aae276b5f0d9db4de Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt Delco <delco@google.com> Reviewed-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-03soc/cavium: Integrate BDK files into corebootDavid Hendricks
* Make it compile. * Fix whitespace errors. * Fix printf formats. * Add missing headers includes * Guard headers with ifdefs Compile DRAM init code in romstage. Compile QLM, PCIe, RNG, PHY, GPIO, MDIO init code in ramstage. Change-Id: I0a93219a14bfb6ebe41103a825d5032b11e7f2c6 Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/25089 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-03soc/amd/stoneyridge: correct GPIO emission error in ACPIKevin Chiu
It can not emit byte data without BytePrefix. design to: Or (Local5, GPIO_PIN_OUT, Local5) error due to GPIO_PIN_OUT is 0x40 but 0x40 encoding means nothing in AML spec. so it will include next emitted string in Or: Or (Local5, Local5, \_SB.GPW2) fix: Store (0x40, Local0) Or (Local5, Local0, Local5) BUG=b:110962003 BRANCH=master TEST=emerge-grunt coreboot extract SSDT then check ACPI syntax is correct Change-Id: I7a0704112b77105826de87b14a38ed2f665224d5 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/27306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-03mb/pcengines/apu1: use generic SPDMichał Żygowski
Clean up leftovers of old SPD generation and utilize common procedure to produce SPD binary. Change-Id: I4e48817c03b4372887bc0ea14209736ae2b4e48f Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/27301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-03drivers/pc80/vga: Fix coding styleElyes HAOUAS
Change-Id: I0452407d1346ca8ead2638e2a31269931ea5d12e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-03mb/intel/dg43gt: Expose some SIO devices via ACPIArthur Heymans
Change-Id: I0df578b98c5b346caa6f6df5fdabda28788e6b66 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-03mb/intel/dg41wv: Expose some SIO devices via ACPIArthur Heymans
Change-Id: Ia658c117434c3fae45bbbe6c472ca58ba4f1a117 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-03ec/google/chromeec: Remove keyboard initializationFurquan Shaikh
Since none of the boards using chromeec select DRIVERS_PS2_KEYBOARD now, there is no need to call pc_keyboard_init anymore. This change gets rid of the call and adds an error message in case any mainboard using chromeec tries to select this config. BUG=b:110024487 Change-Id: Ia0b56abe0a5990e527277eaf3397e00dccda3e50 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-03mb/intel/glkrvp: Get rid of DRIVERS_PS2_KEYBOARD selectionFurquan Shaikh
Until now, chromeec was doing keyboard initialization for the boards that have DRIVERS_PS2_KEYBOARD selected. However, coreboot does not leave the keyboard controller in a default reset state. This could result in payloads or OS failing to probe the controller as there could be stale data buffered in the controller during the handoff. Since the boards using chromeec already perform keyboard initialization in payload, there is no need to initialize the keyboard in coreboot too. This change gets rid of DRIVERS_PS2_KEYBOARD selection from all google mainboards using chromeec. BUG=b:110024487 Change-Id: I9af48e648231c18f98d0cc1ddd178b8d00082b0a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-03mb/google/*: Remove selection of DRIVERS_PS2_KEYBOARDFurquan Shaikh
Until now, chromeec was doing keyboard initialization for the boards that have DRIVERS_PS2_KEYBOARD selected. However, coreboot does not leave the keyboard controller in a default reset state. This could result in payloads or OS failing to probe the controller as there could be stale data buffered in the controller during the handoff. Since the boards using chromeec already perform keyboard initialization in payload, there is no need to initialize the keyboard in coreboot too. This change gets rid of DRIVERS_PS2_KEYBOARD selection from all google mainboards using chromeec. BUG=b:110024487 TEST=Keyboard works fine after booting to OS even if user hits keys during BIOS to OS handoff. Change-Id: I1f49b060eb005c0f2b86f9d68d6758954eeb3cf0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27291 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02arch/x86: add SMM callerPatrick Georgi
Useful for debugging or for cases where we need to enter SMM. Probably should be moved to commonlib or libpayload. Change-Id: I7a9cc626dae9a7751034615ef409eebc6035f5c3 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/25193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-02src: Get rid of unneeded whitespaceElyes HAOUAS
Change-Id: I3873cc8ff82cb043e4867a6fe8c1f253ab18714a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-02src/nb: Fix non-local header treated as localElyes HAOUAS
Change-Id: I8174d7b40008cfe4fba10fde4670682aac0ad078 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-02src/sb: Fix non-local header treated as localElyes HAOUAS
Remove some unneeded includes. Change-Id: I4b9bcb74b6441db9e44fe471b9cd789e42e7093a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-02src/mb: Fix non-local header treated as localElyes HAOUAS
Also remove some unnedded includes. Change-Id: I036208a111d009620d8354fa9c97688eb4e872ad Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 17:40:58 +0000