summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-05-07baytrail: gpio: Fix NCORE gpio-to-pad LUTShawn Nematbakhsh
NCORE pad addresses were wildly wrong due to documentation bugs. BUG=chrome-os-partner:24179 TEST=Manual on Rambi. Verify display isn't always on. Verify brightness control now works in Chrome OS. BRANCH=None. Change-Id: I464436a58baa4957329c11231c5a866dafd97ce8 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/177597 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4980 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07rambi: use SERIRQ pad as keyboard irq in gpio modeAaron Durbin
The level shifting between 3.3V and 1.8V for the SERIRQ signal is not working. Instead use the SERIRQ pad as a gpio which is used as a direct IRQ signal for the keyboard interupt. BUG=chrome-os-partner:23965 BRANCH=None TEST=Built and booted rambi. Keyboard works with associated EC change. CQ-DEPEND=CL:177189 Change-Id: Ifc270ca38207828a6d4711551d4bde9121559cca Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/177223 Tested-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-on: http://review.coreboot.org/4979 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07rambi: make ramids non-legacy gpio inputsAaron Durbin
The romstage code for rambi uses the mmio way of reading inputs. However, this is a problem is the GPIOs are set up as legacy mode. Subsequent warm resets mean the ram_id is read incorrectly. Ensure the ram_id is read consistently by keeping the GPIOs for ram_id in mmio mode. BUG=chrome-os-partner:24085 BRANCH=None TEST=Built and booted. And rebooted. Now seeing consistent ram_id values on warm resets. Change-Id: Ieff98c000be80998854f325754f1e819975d2be5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/177230 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4977 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: enable caching and prefetching in spi controllerAaron Durbin
The default mode of the SPI controller has prefetching disabled. That obviously has a performance impact. Enable both caching and prefetching to make booting faster. This has a significant impact on streaming data out of SPI. BUG=chrome-os-partner:24085 BRANCH=None TEST=Built and booted rambi. Payload loading step went from ~285ms to ~54ms. Change-Id: I065cf44e1de7dcefc49aa9ea9ad0204929ab26f4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/177220 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4976 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: fix direct irq pad configurationAaron Durbin
When a pad is configured for direct IRQ it needs to be in non-legacy. Additionally, the signal is passed directly to the APIC by setting the LEVEL and TPE bits in the pad config register. The APIC can then be configured for level, edge, and rising/falling. BUG=chrome-os-partner:24037 BUG=chrome-os-partner:22863 BRANCH=None TEST=Built and booted with this config. Trackpad is firing interrupts more than it should, but it appears to be a trackpad firmware and/or configuration issue. Change-Id: I00042b2ddba67d6bf23f0e7468d0719196e6f865 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176793 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4975 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: ensure init_chromeos() is called in romstageAaron Durbin
The TPM needs to have the TPM_Startup command sent to it on all boot paths. The call init_chromeos() in romstage_common() fulfills this requirement. BUG=chrome-os-partner:24057 BRANCH=None TEST=Built and booted. Was able to suspend to ram multiple times in a row. Change-Id: Id0339a9d82897249d20ff5f62d2dcb8b535310fa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176803 Reviewed-by: Todd Broch <tbroch@chromium.org> Tested-by: Todd Broch <tbroch@chromium.org> Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4974 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-07rambi: distribute IRQs away from PIRQA on pci devicesAaron Durbin
Some of the drivers in the kernel were not so happy about having shared IRQs. Also, sharing IRQs means more code needs to be run in interrupt context to determine if the IRQ was meant for a particular device. Fix this. No more 'mmc1: got irq while runtime suspended' messages. BUG=chrome-os-partner:24056 BRANCH=None TEST=Built and booted. Looked at /proc/interrupts and noted no more sharing between pci devices. Change-Id: Ie5da102204ffe3156dd55ab17af77df245a57c97 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176792 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4973 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07superio/common/conf_mode: Provide another common pnp entry/exitEdward O'Callaghan
ITE Super I/O's make use of this method to enter and exit in and out of their PNP configuration. Provide functions for use in ram stage component. Change-Id: I2b546c2b17eefc89aaab4982192f5e9a15a16c2f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5666 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-05-07baytrail: don't allow PCIE wake upsAaron Durbin
The PCIe subsystem was constantly waking up boards from S3 and S5. Completely disable PCIe wake ups. It can be made mainboard-configurable later if needed. BUG=chrome-os-partner:24004 BRANCH=None TEST=Both S3 and EC RW->RW update (trip through S5) don't cause wakeups. Change-Id: I922e2947c4b6e29277d913f06192601a2954f8fe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176791 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4972 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: gpio: Make pad input/output state mutually exclusiveShawn Nematbakhsh
Previously pads were being configured as both input and output simultaneously due to the config bits being active low. Create new defines that only enable either input or output, and use them in our GPIO configs. BUG=chrome-os-partner:22863 TEST=Manual on Rambi. Verify system boots and peripherals still function. BRANCH=None. Change-Id: If386682a3d810864b7b9f5d2aecdb2e6cfceea86 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176725 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4971 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07rambi: fixup settings so trackpad can be found in kernelAaron Durbin
The kernel chromeos_laptop driver nomenclature expects the board name to not be in all caps. Fix this as well as the i2c address for the trackpad. BUG=chrome-os-partner:24307 BRANCH=None TEST=Built and booted. trackpad device is found. IRQs still not working yet. Change-Id: Id6be8ee4bce2835e303ea4fe63944be80d2d7ec2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176680 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4970 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: first pass at lpss device initializationAaron Durbin
This commit does the common parts for all LPSS devices that are enabled: enable snoop in IOSF and enable power management. Additionally, the i2c devices are taken out of reset. BUG=chrome-os-partner:23790 BRANCH=None TEST=Built and booted with modified kernel-next. I2C bus devices show up and I see 0x10 on one of the buses. Change-Id: I540caea6a8666f5684dc5cee683a6b085dfac6de Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176424 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4969 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07reg_script: add iosf lpss port accessAaron Durbin
Add the LPSS IOSF port access to reg_script. This is going to be used by baytrail. BUG=chrome-os-partner:23790 BRANCH=None TEST=Buit. Change-Id: I0367acdb584f2de0bb871b136042b57fe6b7ec90 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176423 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4968 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: initialize eMMC deviceAaron Durbin
The eMMC device is initialized as version 4.5 with HS200 speeds. BUG=chrome-os-partner:23966 BRANCH=None TEST=Built and booted rambi to login screen off of eMMC device. Change-Id: I686c6136005fcb2587b939ddea293f4398df9868 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176536 Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4967 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: initialize common SSC functionalityAaron Durbin
The SSC (storage control cluster) houses the SD, SDIO, and eMMC interfaces. The scc cofniguration function, baytrail_init_scc(), is ran in the pre device stage to initialize the SCC. The eMMC is expected to be configured for version 4.5. BUG=chrome-os-partner:23966 BRANCH=None TEST=Built and booted with some other eMMC changes into login screen off of eMMC device. Change-Id: I81cc755a790b7e43ad234a8201dae480277202c8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176535 Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4966 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07reg_script: add iosf paths for score, ccu, and sscAaron Durbin
Handle SCORE, CCU, and SSC IOSF accesses. BUG=chrome-os-partner:23966 BRANCH=None TEST=Built. Change-Id: I6e678eb79bd1451f156bdd14cf46d3378dc527c9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176534 Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4965 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: add score and ssc iosf access functionsAaron Durbin
The SCORE allows controlling the pad configuration while the SSC handles the configuration for the storage control cluster. BUG=chrome-os-partner:23966 BRANCH=None TEST=Built. Change-Id: Ifd9f67a4e88d5bb99faec6ceeb3e263001a87c41 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176533 Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4964 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07rambi: Add DIRQs for trackpad and touchscreenShawn Nematbakhsh
Also add the relevant info about these pins to the ASL tables + add SMBIOS type 41 data for these parts. BUG=chrome-os-partner:22863 TEST=Manual on Rambi. Set some pins to GPIO_DIRQ, and then verify DIRQ regwrites w/ GPIO_DEBUG look correct. Change-Id: Id40655f9fb2ea7b10e1ff58d0b2a8b4cc6f05ff8 Reviewed-on: https://chromium-review.googlesource.com/176299 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4963 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-06Introduce stage-specific architecture for corebootFurquan Shaikh
Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-05-06baytrail: gpio: Add support for direct / dedicated IRQsShawn Nematbakhsh
Add support for DirectIRQ / dedicated IRQs. This consists of up to 16 IRQs for both SCORE and SSUS banks. BUG=chrome-os-partner:22863 TEST=Manual on Rambi. Set some pins to GPIO_DIRQ, and then verify DIRQ regwrites w/ GPIO_DEBUG look correct. Change-Id: I4b0dc6e7ae86c9f554b6e78792239234f702764c Reviewed-on: https://chromium-review.googlesource.com/176165 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4962 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: disable HDA deviceAaron Durbin
For some reason HDA can now be disabled. It's unclear what changes in the baytrail code allowed this to happen, sadly. BUG=chrome-os-partner:22871 BRANCH=None TEST=Noted hda is not in lspci. Change-Id: I64e2560533be6f701fa66cd53c906b62b09012ed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176394 Reviewed-on: http://review.coreboot.org/4961 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: enable SCI and SMI gpiosAaron Durbin
Rambi has 3 pins that need to be configured for SCI and SMI: 1. GPIO_CORE[0] - runtime SCI pin 2. GPIO_SUS[7] - SMI for firmware lid events 3. GPIO_SUS[0] - wake pin for S3 wakes from EC. Configure these pins now that the rest of the infrastructure is in place. The one thing that is yet to work is runtime SCI for lid events once booted. BUG=chrome-os-partner:23505 BRANCH=None TEST=built and booted. lid close at rec screen works. And wake from S3 with a keyboard press works. Change-Id: I5f8e38ec5f4cf1a8ef7aa7fcee9abc344d9b184f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176393 Reviewed-on: http://review.coreboot.org/4960 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: mainboard EC - SCI and SMI fixesAaron Durbin
As rambi is a baytrail board it doesn't have a dedicated wake pin. Therefore, one needs to enable the proper GPIO to wake up the sytem before going into S3. BUG=chrome-os-partner:23505 BRANCH=None TEST=Put system into S3. Keyboard press created wake event. Also, typed 'lidclose' on EC console while at recovery screen. Machine properly shutdown. Change-Id: Ic67b6bce93d57c620f498505d83197e4ae34a07d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176392 Reviewed-on: http://review.coreboot.org/4959 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: add GPIO SMI supportAaron Durbin
GPIOs which trigger SMIs only set the status bits in the ALT_GPIO_SMI regier. No bits in the SMI_STS register are set. Therefore, the ALT_GPIO_SMI register needs to be read and cleared on every SMI. Additionally, the mainboard_gpi_smi() handler needs to be called as well on every SMI because of this property. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted to recovery screen. Typed 'lidclose' on EC console. SMI occurred which caused the board to be shutdown. Change-Id: Ic204d8b928a0cb4f51f108a649f374d9f94e4f47 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176391 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4958 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: add support for routing gpio pins to smi/sciAaron Durbin
In order for gpio pins to trigger an smi/sci the GPIO_ROUT register needs to be set accordingly. For SMI, the ALT_GPIO_SMI register needs to be enabled for each gpio as well. The first 8 gpios from the suspend and core well are the only gpios that can trigger an SMI or SCI. The settings for the GPIO_ROUT and ALT_GPIO_SMI register are not commited until the SMM settings are enabled in the southcluster. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted. Manually triggered SCI by changing GPE0a_EN and toggling PCH_WAKE_L on the EC console. Change-Id: Id79b70084edc39fc047475e984494c224bd75d6d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176390 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4957 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: fix fadt structure for gpe0 blockAaron Durbin
The gpe0 block's size was being misreported. Correct the gpe0 size and use make the FADT fields be more robust instead instead of hand calculating fields that are the based on the same size. This change correctly enables GPE events in the kernel. Confirmed this by using iotools read the gpe_cnt register. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted. Confirmed EC's GPE event is enabled (but still not working). Change-Id: I415710f7fec2e95cecee3bf679ee673dacc27480 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176271 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4956 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: Add microcode/punit release 31aDuncan Laurie
BUG=chrome-os-partner:23505 BRANCH=none TEST=build and boot on rambi Change-Id: I89c25142245cd268f755210784fd9d0c60dc5661 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176305 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Tested-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4955 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: Add ACPI CPU entriesDuncan Laurie
- C-state table based on static config MWAIT values are from ref code for non-S0ix config C6 substate 8 is ignored by the kernel as it violates the CPUID but it is left in as the other substate may not work. - P-state table generated with proper ratio and VID values relies on having the package power msr set to magic value as the power-on default is wrong - T-state table uses static table BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: I7c997e58cb3a71d0ec413b17f0c5467bef4bf62c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175742 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4954 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: Add BCLK and IACORE to pattrsDuncan Laurie
The bus clock speed is needed when building ACPI P-state tables so extract that function and have the value be saved in pattrs. The various IACORE values are also needed, but rather than have the ACPI code to the bit manipulation have the pattrs store an array of the possible values for it to use directly. BUG=chrome-os-partner:23505 BRANCH=none TEST=build and boot on rambi Change-Id: I5ac06ccf66e9109186dd01342dbb6ccdd334ca69 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176140 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4953 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: Enable Turbo/Burst and set some magic MSRsDuncan Laurie
As far as I can tell turbo enabling behaves like it did on haswell so use the standard code. There are also some magic values to set in some magic MSRs related to turbo and package power so they report correctly. The L2 cache shrink is enabled and a threshold is set that makes both dual and quad core happy. C1E is disabled to match the reference code. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: Ic6d4283d480a44d85a9b96571baf83928615665c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175743 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4952 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06regscript: Add support for MSR typeDuncan Laurie
This required changing value/mask types to uint64_t. Another option would be to use id field to select low or high 32 bits of the MSR and set them independently. BUG=chrome-os-partner:23505 BRANCH=none TEST=build and boot on rambi Change-Id: Ied9998058a8035bf3f003185236f3be3e0df7fc9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176304 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4951 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: include the EC devices normally on superioAaron Durbin
The superio.asl file allows for the mainboard to hang devices off of the LPC bus in ACPI. Include the keyboard controller, EC memory map, and host interface's resources. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted. Noted resource reservations in dmesg. Change-Id: Ida6481cd4c4725b5d3946bc64179ee99c93b0106 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176134 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4950 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: include mainboard's superio.aslAaron Durbin
The mainboard needs an opportunity to hang devices off of the LPC device. Therefore, provide this opportunity for the mainboard. BUG=chrome-os-partner:23505 BRANCH=None TEST=Buit and booted with keyboard. Keys work. Change-Id: Ie2b660ad43e86d9237b0b0bb0720b069670bc537 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176133 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4949 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: update EC supportAaron Durbin
Fix the SMI and SCI gpios for Rambi. Also, add in the EC callbacks for the SMI handler. Note that the handler for GPI SMIs has not been tested yet as baytrail chipset code doesn't yet support setting up those configurations yet. BUG=chrome-os-partner:23505 BRANCH=None TEST=Noted that SCI was enabled in /sys/firmware/acpi/interrupts for the EC's SCI GPI. Also was able to see Chrome EC messages with CONFIG_DEBUG_SMI and powering down at the dev screen. Change-Id: I67b278fd38e1c09271d2c1e16e42f6e8c49e3a70 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176077 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4948 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: add more irq defintionsAaron Durbin
The IRQs used for devices that are in acpi mode are added as well as the IRQ defitions for the dedicated GPIO IRQ routing. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built. Change-Id: I2eed5a4584e2d908c32617c9289a2abeaa30bd44 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176120 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4947 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: configure acpi SCI irqAaron Durbin
Baytrail has a configurable SCI irq. Add support for properly configuring SCI irq. Note that it is currently fixed to IRQ9, but the code supports setting it to the other supported values. The current mainboards using baytrail defer the madt IRQ override information to the chipset. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted. Noted 'SCI is IRQ9' message. Change-Id: I7b307bd58f9de944f0cb4c116107a15345499f2e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176075 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4946 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: mirror bayleybay's eMMC gpio setupAaron Durbin
These changes to the eMMC pads allows the kernel to see the eMMC device. One is able to install onto the eMMC device, and the kernel is loaded and booted from eMMC device. Note, that it may not fully boot because of other issues such as not-completely working ACPI support. BUG=chrome-os-partner:22580 BRANCH=None TEST=booted off of usb drive. can see eMMC device. Change-Id: I9c088398297a0b559383bdf4a389dd19a1110e0f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176073 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4945 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: Fix eDP panel functionalityDuncan Laurie
For some mysterious reason GPIO_S0_NC22 is making the eDP panel go entirely white when it is configured with internal pullup. Since these (supposedly XDP related) pins are unknown functionality lets set them to GPIO_DEFAULT instead of GPIO_NC. Additionally the VBIOS is being changed to issue int15 callback to determine the boot graphics device. If we list both LFP and EFP then the dev/rec screens will show on the panel when HDMI is not attached and otherwise will display on HDMI. BUG=chrome-os-partner:23507 BRANCH=rambi TEST=build and boot on rambi, see firmware/kernel screens on the panel when HDMI is not attached, and firmware screens on the panel and kernel screens on both when HDMI is attached. Change-Id: Ieb05a591d63c4f8e09fa154eeb76004d32579508 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175952 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4944 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: add support for S3 resumeAaron Durbin
Previously the only path through memory init and coreboot was hardcoding S5. Therefore all S3 paths would not be taken. Allow for S3 resume to work by enabling the proper control paths in romstage. BUG=chrome-os-partner:22867 BRANCH=None TEST=While in kernel 'echo mem > /sys/power/state'. Board went into S3. Power button press resumed back into kernel. Change-Id: I3cbae73223f0d71c74eb3d6b7c25d1b32318ab3e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175940 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4943 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06lenovo/t60: Add "IBM ThinkPad Embedded Controller" SMBIOS OEM StringTrevor Mosey
linux/drivers/platform/x86/thinkpad_acpi.c looks for an EC version string before loading, this code copies the vendor BIOS by exposing this string. This was originally part of x60's mainboard.c Change-Id: I5e54ea2833252bc4dbba46ceb67d78c435b34845 Signed-off-by: Trevor Mosey <uberushaximus@gmail.com> Reviewed-on: http://review.coreboot.org/5638 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06northbridge/intel/sandybridge/pei_data.h: Fix typo in hig*h*est in commentPaul Menzel
Change-Id: I0daf5d1d446de1f09b695f177b0491301613e278 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5667 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-05baytrail: fix up FADTAaron Durbin
The FADT for baytrail had incorrect offsets leading to the kernel spewing a huge mess of ACPI errors. Fix these offsets to be initialized in the chipset code. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted into kernel on rambi. Login screen comes up. Change-Id: I89fc2a4fd800ff01cedf89b51cfb1369aceb9f03 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175663 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4941 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05baytrail: interrupt routing supportAaron Durbin
This provides the initial support for interrupt routing in bay trail. It includes both acpi changes and board changes to ensure the interdependencies are met with the current ASL code. The PIRQ routing is handled by the mainboard exporting an irqroute.h header that describes the per device and PIRQ PCI settings. There are still a lot of ACPI errors in the kernel with this change, though. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted rambi into kernel. Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Id8a865a24fc8d49743c0b54efdb64aaef52fcd8e Reviewed-on: https://chromium-review.googlesource.com/175700 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4940 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05haswell: move to mp_init libraryAaron Durbin
The mp_init library was based off of haswell code, but baytrail was the first chipset to take advantage of it. Move haswell over to using it so that the code duplication can be removed. Change-Id: Id6e9464df028aa6ec138051f925817c85b4c13e5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5413 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-05-05lib/hexdump: Use `size_t` for length parameter of `hexdump32()`Paul Menzel
In the signature of the function `hexdump32()` it does not make sense to represent a length, assumed to be positive, as a signed integer. With this change, it is no longer necessary to cast a pointer to unsigned long when passing it to `hexdump32()`. The same change for the function `hexdump()` was done in commit 3dd0e72d [1]. lib/hexdump: Take const void * and size_t as arguments [1] http://review.coreboot.org/4575 Change-Id: Id97f5daff95f94e862ee8b5be896a6629b125a13 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5646 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05lib/hexdump.c: Indent with tabs instead of spaces and remove empty linesPaul Menzel
The coding style requires to use tabs for indentation and not spaces. Use GNU indent 2.2.11 with the switch `-linux` to indent the file, which also removes the empty lines at the end of the file. Change-Id: I874f178e50d7558d3299026aec2771ad45f88d8e Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/4576 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA: Fix BiosCallouts table formattingKyösti Mälkki
Already done for fam15tn and fam16kb. Change-Id: I3da36bfe6fd1805867eee5aa1f017c4fda084349 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5660 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA: Implement EmptyHeap()Kyösti Mälkki
Heap allocation begins with BIOS_HEAP_MANAGER, no need to clear the fields individually. Change-Id: Ia1af84bd09d1edf8f72223752557d44a96dec6e1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5659 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam14: Use common calloutsKyösti Mälkki
Backported from fam15tn and fam16kb. This also implements GetHeapBase() to satisfy some requirements of HAVE_ACPI_RESUME for the following boards: amd/inagua amd/south_station amd/union_station asrock/e350m1 Change-Id: I488d063d4eabf4bf45bcbabd1e8f13b88b2ef401 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5658 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-05AGESA fam14: Add fam14_callouts headerKyösti Mälkki
Backported from fam15tn and fam16kb. Change-Id: I868352b32ff56a8386c615ab1a9f59e7e875292e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5657 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 13:12:00 +0000