summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-06-11amd/southbridge/lpc: SPI BAR has fixed size/locationDave Frodin
The CIMX sb700/sb800/sb900 and agesa/hudson code was treating the LPC SPI BAR as a normal PCI BAR. This will set the resources for a fixed size at a fixed address. This was tested on hp/abm, amd/persimmon, and gizmosphere/gizmo boards. Change-Id: I1367efe0bbb53b7727258585963f61f4bd02ea1d Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/5947 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11ibexpeak: Set number of USB ports.Vladimir Serbinenko
Change-Id: Ife3febcc88967386dfae624cd237562a34a68471 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5956 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11ibexpeak: Remove some dead code.Vladimir Serbinenko
Change-Id: I68ae49d20a2524f03c4503f2b3be93f07b9cb6e3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5955 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11AMD/CIMx: Add functions for AMD PCI IRQ routingMike Loptien
The PCI_INTR table is an Index/Data pair of I/O ports 0xC00 and 0xC01. This table is responsible for physically routing IRQs to the PIC and IOAPIC. The settings given in this table are chipset and mainboard dependent, so the table values will reside in the mainboard.c file. This allows for a system to uniquely set its IRQ routing. The function to write the PCI_INTR table resides in cimx_util.c because the indices into the table have the same definitions for all SBx00 FCH chipsets. The next piece is a function that will read the PCI_INTR table and program the INT_LINE and INT_PIN registers in PCI config space appropriately. This function will read a devices' INT_PIN register, which is always hardcoded to a value if it uses hardware interrupts. It then uses this value, along with the device and function numbers to determine an index into the PCI_INTR table. It will read the table and program the corresponding value into the PCI config space register 0x3C, INT_LINE. Finally, it will set this IRQ number to LEVEL_TRIGGERED on the PIC because it is a PCI device interrupt and the must be level triggered. For example, the SB800 USB EHCI device 0:18.2 has an INT_PIN value hardcoded to 2. This corresponds to PIN B. On the Persimmon mainboard, I want the USB device to use IRQ 11. I will program the PCI_INTR table at index 0x31 (this USB device index) to 11. This function will then read the INT_PIN register, read the PCI_INTR table, and then program the INT_LINE register with the value it read. It will then set the IRQ on the PIC to LEVEL_TRIGGERED by writing a 1 to I/O port 0x4D1 at bit position 4. Also, the SB700 has slightly different register definitions than the newer SB800 and SB900 so it needs its own set of #defines for the pci_intr registers. Only the Persimmon mainboard is adapted to this change as an example for other mainboards. Change-Id: I6de858289a17fa1e1abacf6328ea5099be74b1d6 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/5877 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-11PIC i8259: Move #defines and functions to i8259.hMike Loptien
The PIC i8259.c file has a lot of #defines and function definitions in it. I am moving these to the i8259.h file and also adding a few functions to update the PIC IRQ mask register. The PIC default configuration has all of its interrupts masked off except for IRQ2. IRQ2 is where the Slave PIC is cascaded from the Master PIC. Change-Id: I78d505358c29fadbc184137a09120863ea1d5c13 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/5950 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-11lippert/toucan-af: Fix comment on HAVE_ACPI_RESUMEKyösti Mälkki
S3 resume is expected to work now, however the 3s delay and flash wear is still there. Change-Id: I7edbce7bcf9c2160099fd5e371562b1ec63d45d8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5971 Tested-by: build bot (Jenkins) Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-06-11lippert/frontrunner-af: Fix comment on HAVE_ACPI_RESUMEKyösti Mälkki
S3 resume now works, however the 3s delay and flash wear is still there. Change-Id: I9d2eda5454baf7704807cf67f3aca94a67de3406 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5970 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
2014-06-11amd/hudson: Add the IOAPIC space to the fixed resources tableDave Frodin
Without this change the IOAPIC memory window would collide with PCI config space. This was tested on the hp/abm board. Change-Id: I5dd53463961f75bab80a41dc7beff8d0434b24ae Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/5946 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11amd/family16kb: Move and resize the MMIO regionDave Frodin
The Kabini MMIO region was assigned a 256MB region at 0xA0000000. That location is below TOP_MEM and is getting carved out of useable system memory which is not being reclaimed above 4GB. This changes its size to 64MB and moves it to 0xF8000000. This was tested on the hp/abm and asrock/imb-a180 boards. Change-Id: Ib226bc954311a3a2a15f182ab4618f4924e95a5b Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/5945 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-09nuvoton/nct5104d: Update the #defined LDNsDave Frodin
Change-Id: I4e4bc09a8f8fabe68519a29dc421af82c76c9873 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/5944 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-06superio/nuvoton: factor out generic romstage componentsFelix Held
The romstage of Nuvoton Super I/O chips (but not Nuvoton BMC chips) is identical, so the early_serial.c file can be moved under nuvoton/common. The Nuvoton BMC chip WPCM450 is however left untouched. Change-Id: I4663176c1003b24a49a9fe5f9ebd27a1963b5565 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/5909 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2014-06-06AGESA: Use common heap allocatorKyösti Mälkki
Change-Id: I5df1f0efdef2592b762fe391edaadbca4593e85a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5689 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06AGESA: Use common GetBiosCallout()Kyösti Mälkki
Change-Id: I9c8f7cc98c65102486e17ec49fa2246211dffc4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5688 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06AGESA fam15tn fam16kb: Use shared default calloutsKyösti Mälkki
Change-Id: Ibbb07ef308c7e92a8a8dfe066f5e3866d5f8aee2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5687 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06AGESA fam15tn fam16kb: Use common handler for GNB_GFX_GET_VBIOS_IMAGEKyösti Mälkki
Change-Id: I158993bcb654ef27a9fc6b7e9dc3fc955fb740fa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5686 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06Drop unused change_i2c_mux()Kyösti Mälkki
Change-Id: I3ac39441746d739ac19e831bb67c76405c24ba27 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5925 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-06superio/smsc/kbc1100: Virtually rewrite support and fix mainboardsEdward O'Callaghan
1. Remove #include .c in romstage. 2. Make romstage component symbols linker-time. 3. Provide header guards and prototypes in superio romstage support. 4. Correct function type-signatures to be static/non-static where appropriate, avoid 'pretend optimisations' by unnecessarily inlining functions. 5. Separate out UART enable from various other PNP hard coding Change-Id: I9b8dad7c02d802e97db73ddf2913d5c6bb33a419 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5916 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-06build: Drop libgcc runtime wrapper in Clang buildsEdward O'Callaghan
This GCC specific workaround of wrapping of libgcc runtime symbols with gcc.c is not nessary with libcompiler-rt linkage. Change-Id: I50a2bc99d97f68a2ad2b51a92ea0e7086bab35fe Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5812 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03superio/smsc/smscsuperio: Make romstage linkable with headerEdward O'Callaghan
Rewrite smsc/smscsuperio romstage component to be more consistent and provide header there-by removing #include's of early_serial.c's in mainboard's. Change-Id: I572e0c76422f09d4de88935a36c0a59e5350e6e0 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5915 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03superio/ite/it8661f: Make early_serial into romstage symEdward O'Callaghan
Following similar reasoning as commit: d304331 superio/fintek/f81865f: Avoid .c includes Avoid any mistaken future inclusion of early_serial.c in mainboard.c code by providing symbols in romstage. Change-Id: I9e763a7ad9de090e35acdcf4d6a280d8227c6015 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5508 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03mainboard: Remove #include early_serial.c from w83977tf boardsEdward O'Callaghan
These non-ROMCC boards #include the model specific w83977tf Super I/O romstage component. The generic winbond_early_serial() function serves well here to further tighten integration into the new Super I/O framework and drop dependence on #include'ing .c files, leaving only ROMCC boards. Change-Id: Ib63c0f29f994c54e6112702506f288535799706c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5898 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03superio/ite/it8772f: Depreciate early wdt functionsEdward O'Callaghan
We have better written generic implementations of these functions introduced in commit: a7d14a1 ite/common: Introduce common watchdog and 3.3V VSB helpers Change-Id: Ic93d78fce18c68d1d1bf3b537e8985a2532a8fcf Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5901 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03superio/ite/it8772f: Move towards removing #include .cEdward O'Callaghan
Move samsung/stumpy board towards generic romstage component and away from poorly written hard-coded model specific Super I/O component. This is an incremental step towards getting obj-level abstraction between board and Super I/O. Change-Id: I358c5abef85c2ffa1b7178025cde8834a35b0a51 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5899 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03northbridge/intel/i945/gma.c: Add and use defines for `GMADR` and `GTTADR`Paul Menzel
Change-Id: I0f39b35fbf8e053ba21454a2847d6bb3ac5d2e1c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5923 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03northbridge/intel/i945/i945.h: Move define `BSM` to section D2F0Paul Menzel
The Base of Stolen Memory (BSM) register belongs to device 2, function 0. Change-Id: I2381f87ffaccb2f8034c160fc30c1d92f8b19402 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5922 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-02sandybridge: Pass chip info to i915lightup.Vladimir Serbinenko
Change-Id: I280441aadb0575dc0b99584cdcd48cc76a0289a2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5284 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-02i945: Fix TSEG size allocation for get_top_of_ram()Kyösti Mälkki
Seems boards with i945 had TSEG disabled so this had gone unnoticed. Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Change-Id: I6a00ea9121847ce2fede22538e1b53a870d761f1 Reviewed-on: http://review.coreboot.org/5892 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-06-02i945: Fix resource bases for UMA and TSEGKyösti Mälkki
TSEG appears in memory below graphics UMA region. Seems boards with i945 had TSEG disabled, so the incorrect order did not make a difference. Change-Id: Ie293aab17b60b5f06a871a773cd42577c7dc7c7b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5891 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-06-01mainboard/ibase/mb899: Trivial, Non-local header treated as localEdward O'Callaghan
Change-Id: I5cb496d0d582d3dc5c0c0635f632561f8a3dd853 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5897 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-06-01northbridge/intel/i945/i945.h: Trivial, fixup header guardsEdward O'Callaghan
Change-Id: Iff15ab436e5b7b4e189c7341e7c508faaef07a3a Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5896 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-06-01lenovo/x201: Fix order of SPI init.Vladimir Serbinenko
The lock bit for UVSVC/LVSVC was set before both registers were programmed. Change-Id: I000440db5c8dd2f260ebc1b69108b75621faf7b3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5167 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-01lenovo/t60: Implement intel VGA callbacks.Vladimir Serbinenko
Without it option ROM run results in just a black screen. Change-Id: Id203f55ca0f02c290a3f40ac1ec7c5f23c5580bf Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5344 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-01lenovo: Make version look like something thinkpad_acpi would acceptVladimir Serbinenko
thinkpad_acpi checks that BIOS version matches some pattern. Report version in this form. Not cleaned up as the idea of this patch seems to be met with resistance. Can make it Thinkpad-specific if the idea is accepted. Change-Id: I15e33e87e7a7f42d6a06f12fb39b5172153af8a1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4650 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-01i915_reg: Declare LVDS register values.Vladimir Serbinenko
Change-Id: If8b3578c4fa31bf9f09c0053a5cac7ebc993b634 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5319 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-01acpigen: Add acpigen_emit_eisaid.Vladimir Serbinenko
Change-Id: Ib92142a133445018cd152dabe299792ba5f36548 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5240 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-31superio/nsc/pc87309: Avoid .c includes in mainboardEdward O'Callaghan
Make superio romstage component link-time symbols. Change-Id: Icde27465a05946498ff7b8f1aaa7a9e8ba074272 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5880 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-31superio/winbond/w83627hf: Avoid .c includes in mainboardsEdward O'Callaghan
Move towards the removal of the superio model specific xxx_serial_enable implementation. Make remaining superio romstage parts link-time symbols and fix corresponding mainboards to match. The following mainboards remain unconverted as they are ROMCC: - mainboard/supermicro/x6dai_g - mainboard/supermicro/x6dhe_g - mainboard/supermicro/x6dhr_ig - mainboard/supermicro/x6dhr_ig2 and so block the final removal of w83627hf_serial_enable(). Special cases: - mainboard/supermicro/h8qme_fam10: Provide local pnp_ sio func Provide local superio pnp_ programming entry/exit functions as to avoid making superio implementation global symbols. Although this is not the proper/final solution, it does mitigate possible symbol collisions and allow for continued superio refactorisation. Change-Id: Iaefb25d77512503050cb38313ca90855ebb538ad Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5601 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-31superio/winbond/w83627ehg: Depreciate romstage componentEdward O'Callaghan
Part 1/2: These are actually not necessary if Super I/O support is properly utilized. Change-Id: I39b621e582f8d0762276d29492c91dce500f0665 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5870 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-31i945: Use defines for DEVENKyösti Mälkki
Change-Id: I32461449354155510c0e14e9d0ce396068ea50d4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5890 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-05-31northbridge/intel/i945/northbridge.c: Use define `TOLUD` instead of ↵Paul Menzel
hardcoded value Change-Id: I4739c5544aade105399347d239ba64f5115db397 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5869 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-31northbridge/intel/i945: Add define for register `BSM` and use itPaul Menzel
Add a define for the register Base of Stolen Memory (BSM) and use it. Change-Id: I5b1df4e088d88344fac8cd8d218e76b08a885f58 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5884 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-30cpu/intel/fsp_model_206ax: change realpath to readlinkMartin Roth
realpath and readlink can be used to do the same thing - in this case we're turning path1/path2/../path3/path4 into path1/path3/path4 so that the makefile's wildcard routine can evaluate it. Debian derivatives don't seem to include realpath. (and even when it's installed, it's not the gnu coreutils version.) Change-Id: I0a80a1d9b563810bdf96aea9d5de79ce1cea457a Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/5793 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2014-05-30intel/bayleybay: Add Intel's Bayley Bay mainboardMartin Roth
Bay Trail-I Platform – Bayley Bay-I Customer Reference Board The Bayley Bay CRB-I is a dual-channel DDR3L SO-DIMM non-ECC platform. It is designed to support the Bay Trail-I SoC. This implementation uses the Intel FSP (Vist the Intel FSP website for details on FSP architecture and support). This code does not currently support S3. All other features and IO ports are functional. Booted on Ubuntu 14.04, Mint 16, Fedora 20 with SeaBIOS payload. Memtest86, FWTS, and other tests pass. Notes: - Generates a 2MB binary to be flashed to the upper 2MB of the ROM, to preserve the existing Intel Flash Descriptor & TXE binary. - Tested with B0 & B3 Baytrail I parts Board support page will be updated on acceptance. Change-Id: I80c836c7590f2dc25ec854e7a0bb939024cea600 Signed-off-by: Martin Roth <gaumless@gmail.com> Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5792 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-05-29PCI IRQs: Swizzle PCI IRQs for PCI bridgesMike Loptien
The PCI Specification states that devices that implement a bridge and a secondary bus must swizzle (rotate) the interrupt pins according to the table below: Child Dev # Child PIN Parent PIN 0,4,8,12... A/B/C/D A/B/C/D 1,5,9,13... A/B/C/D B/C/D/A 2,6,10,14.. A/B/C/D C/D/A/B 3,7,11,15.. A/B/C/D D/A/B/C Which is also described by this equation: PIN_parent = (Pin_child + Dev_child) % 4 When a device is found and its bus number is greater than 0, it is on a bridge and needs to be swizzled. Following the string of parents up to the root bus and swizzling as we go gives us the desired swizzling result. When BIOS_SPEW is defined, it will print out each step of the swizzling process. Change-Id: Icafeadd01983282c86e25f560c831c9482c74e68 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/5734 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Mike Loptien <mike.loptien@se-eng.com>
2014-05-29fsp_baytrail: Add the FSP version of Intel's Bay Trail-I chipMartin Roth
While similar to the Bay Trail-M/D code based on the MRC, there are many differences as well: - Obviously, uses the FSP instead of the MRC binaries. - FSP does additional hardware setup, so coreboot doesn't need to. - Different microcode & microcode loading method - Uses the cache_as_ram.inc from the FSP Driver - Various other changes in support of the FSP Additional changes that don't have to to with the FSP vs MRC: - Updated IRQ Routing - Different FADT implementation. This was validated with FSP: BAYTRAIL_FSP_GOLD_002_10-JANUARY-2014.fd SHA256: d29eefbb33454bd5314bfaa38fb055d592a757de7b348ed7096cd8c2d65908a5 MD5: 9360cd915f0d3e4116bbc782233d7b91 Change-Id: Iadadf8cd6cf444ba840e0f76d3aed7825cd7aee4 Signed-off-by: Martin Roth <gaumless@gmail.com> Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5791 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-05-29drivers/intel/fsp: update enable_mrc_cache with fast bootMartin Roth
When going from a configuration with fast boot disabled to one with it enabled, ENABLE_MRC_CACHE was not being enabled properly. This forces it on with ENABLE_FSP_FAST_BOOT. Change-Id: If7b6374e0c0a1d5403a50a1b0a958cea6f96cc88 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/5794 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-05-29add rtc_init() to romstageMartin Roth
The FSP clears the bit that tells us whether or not the RTC has lost power when it sets up memory. Because of this, we need to initialize the RTC in romstage instead of ramstage. Change-Id: I158e4339fc539d32cfb2428042df6156d312a5f4 Signed-off-by: Martin Roth <gaumless@gmail.com> Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5735 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-28superio/winbond/w83627thg: Depreciate romstage componentEdward O'Callaghan
Depreciate the model specific early_serial.c romstage component for this Super I/O in favor of the recent generic winbond romstage framework. Change-Id: I22775dc9b6341c8994d21591b7176abe4dd99911 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5724 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-05-28superio/winbond/w83627uhg: Depreciate romstage componentEdward O'Callaghan
Depreciate the model specific early_serial.c romstage component for this Super I/O in favor of the recent generic winbond romstage framework. Convert dependent board to generic winbond serial init. Note the clock function is actually invalid since it never enters into PNP config mode to twiddle the register. Further, 48MHz is the default (page 9 of data-sheet) and so romstage.c need not do anything to the clock rate hence why it presumably works with this invalid function. Change-Id: I4706a1446c1b391b8390ac0361700ce6f15b9206 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5725 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-05-28superio/ite/it8712f: Depreciate model specific early_serial.cEdward O'Callaghan
We now have common ite_*_*() functions for romstage and hence no longer require the model specific portion of this superio support. Change-Id: I30400abf27008a88072673075bba445f100d9ad3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5838 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 14:07:32 +0000