summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2019-05-21binaryPI/00670F000: Remove AGESA.c fileKyösti Mälkki
Change-Id: Id48de8b2f6feb6c29d745140c872215faa32eb37 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31487 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-21soc/amd/common: Refactor AmdCreateStruct() useKyösti Mälkki
AmdCreateStruct() and AmdReleaseStruct() are equally bad when it comes to lack of correct function declarations for definitions found in vendorcode binaryPI/AGESA.c. Replace these with calls that go through the common module_dispatch() functions. Change-Id: I611bcbe2a71fb65c8eb759a9dc74cbd9cb74136e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31486 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-21mb/lenovo/r500: Add mainboardArthur Heymans
Tested: - Ethernet NIC - Wifi RFKill - USB - LVDS, VGA with libgfxinit - Booting with dock attached (COM1) - Keyboard, trackpoint - SeaBIOS 1.12 - S3 resume - Tested in descriptor mode, with vendor FD and ME - Add VBT to ACPI OPregion Untested: - SATA (likely works) - Trackpad (my cable is broken, likely works) - Displayport (likely works) - Descriptorless mode - DVD drive - Extra battery - model with ATI GPU Does not work: - Dock hotplug - Quad core CPU (hangs during AP init, probably needs hardware mod) - Hotplugging the expresscard slot (works with 'echo 1 | sudo tee /sys/bus/pci/rescan') TODO: - proper dock support - documentation note: This board was hard to flash, I had to desolder the flash. TESTED: on a R500 with an Intel iGPU, SeaBIOS 1.12, Debian 9, Linux 4.9 from USB Change-Id: I9e129b2e916acdf2b8534fa9d8d2cfc8f64f5815 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/28644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-21mb/lenovo/t400: Add VBT fileArthur Heymans
All variants (t400, r400, t500, w500) use the same OPROM for the IGD. Change-Id: I1b9db7b29b22809542f80f60a5e2eb3283fe1c02 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-21src/drivers/intel/fsp2_0: Fix logical 'and' of equal expressionsElyes HAOUAS
Probably a copy/paste issue. Change-Id: I0334bc1f5d145df5af0a307cf8e7c23cc0605f76 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20soc/intel/cannonlake: Configure SPI CS parameters in FSP UPD.Tim Wawrzynczak
When FSP UPD parameters are configured, also configure the GSPI CS lines appropriately. GSPI driver assumes CS0 is the CS signal to use. BUG=b:130329260 BRANCH=None TEST=Boot Kohaku, TPM communcation still functional. Change-Id: Ic816395b7d198a52c704e6cabcb56889150b741c Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32791 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-20src/vendorcode/amd/agesa/f15tn: Update microcode to version 0x600111F 2018-03-05Mike Banon
This microcode update for CPU IDs 0x610F01/0x610F31 improves system stability: in particular, fixes Xen hardware virtualization freezes. Also it attempts to patch some Spectre-related security vulnerabilities. This new microcode has been tested by multiple coreboot community members and found working perfectly. Old version: 0x600110F [2012-01-11] replaced by New version: 0x600111F [2018-03-05] Change-Id: Ied5da0ff85abb63c2db2eeafd051b8e00916d961 Signed-off-by: Mike Banon <mikebdp2@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/28273 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: <awokd@danwin1210.me> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-20src/vendorcode/amd/agesa/f16kb: Update microcode to version 0x7000110 2018-02-09Mike Banon
This microcode update for CPU ID 0x700F01 improves system stability: in particular, fixes Xen hardware virtualization freezes. Also it attempts to patch some Spectre-related security vulnerabilities. This new microcode has been tested by multiple coreboot community members and found working perfectly. Old version: 0x700010B [2013-07-09] replaced by New version: 0x7000110 [2018-02-09] Change-Id: Iebe6e54d922378a8a1feb97f37b08ac50c8234b2 Signed-off-by: Mike Banon <mikebdp2@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/28370 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-20mb/google/{arcada, hatch, sarien}: Override FSP default GPIO PM configurationSubrata Banik
sarien/arcada: GPIO_COMM_0/2/3/4: Enable gpio community all PM configuration GPIO_COMM_1: Disable RCOMP clock gating due to GPP_D18 IRQ mapped for H1 TPM. hatch: GPIO_COMM_0/1/2/3: Enable gpio community all PM configuration GPIO_COMM_4: Disable RCOMP clock gating due to GPP_C21 IRQ mapped for H1 TPM. BUG=b:130764684 TEST=H1 TPM interrupt working find and able to boot from fixed boot media Change-Id: Ia4d5483847a4d243b9038119d4bb5990591cc754 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20mb/google/dragonegg: Override FSP default GPIO PM configurationSubrata Banik
GPIO_COMM_0/2/3/4: Enable gpio community all PM configuration. GPIO_COMM_1: Disable RCOMP clock gating due to GPP_D16 IRQ mapped for H1 TPM. BUG=b:130764684 TEST=H1 TPM interrupt working find and able to boot from fixed boot media Change-Id: I1f83f938f201c6574367960b1027555767cf6f3d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20soc/intel/cannonlake: Make use of gpio_pm_configure()Subrata Banik
Provide option in chip.h to set dynamic local clock gating setting. BUG=b:130764684 TEST=Able to build and boot CML. Change-Id: Iec60076398b745e11d5025e4d7a5c35374d918a4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20soc/intel/icelake: Make use of gpio_pm_configure()Subrata Banik
Provide option in chip.h to set dynamic local clock gating setting. BUG=b:130764684 TEST=Able to build and boot ICL. Change-Id: Ic30a490aadb8cc9c05a19a05533ab0196c69b7f1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20soc/intel/common/block/gpio: Add gpio_pm_configure() functionSubrata Banik
This patch adds new function to perform gpio power management programming as per EDS. BUG=b:130764684 TEST=Able to build and boot from fixed media on ICL and CML. Change-Id: I816a70ad92595f013740a235a9799912ad51665e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20ec/google/wilco: Add support for KB_ERR_CODE to Wilco ECKeith Short
Adds support for the KB_ERR_CODE command on the Wilco EC. This command is used to drive diagnostic LEDs on the platform after a failed boot. This change also adds the Wilco EC mailbox command support to bootblock and verstage so that those stages can use the KB_ERR_CODE command. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: I96d17baf57694e4e01c676d80c606f67054cd0c3 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32776 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-20i945: Add device identification D2:F1Elyes HAOUAS
Add device identification D2:F1 for desktop version. (see Intel 945G/945GZ/945GC/945P/945PL Express Chipset Family datasheet page 192) Change-Id: Ie060644d635a7031ee6f55420d63751192481091 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-20console: Add new function die_with_post_code()Keith Short
Add a new helper function die_with_post_code() that generates a post code and an error string prior to halting the CPU. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: I87551d60b253dc13ff76f7898c1f112f573a00a2 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32838 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-20sb/amd/cimx/sb800: Get rid of power button device in corebootPaul Menzel
Apply commit d7b88dcb (mb/google/x86-boards: Get rid of power button device in coreboot) to AMD Brazos boards [1]: > As per the ACPI specification, there are two types of power button > devices: > 1. Fixed hardware power button > 2. Generic hardware power button > > Fixed hardware power button is added by the OSPM if POWER_BUTTON flag > is not set in FADT by the BIOS. This device has its programming model > in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this > power button device by default if the power button FADT flag is not > set. > > On the other hand, generic hardware power button can be used by > platforms if fixed register space cannot be used for the power button > device. In order to support this, power button device object with HID > PNP0C0C is expected to be added to ACPI tables. Additionally, > POWER_BUTTON flag should be set to indicate the presence of control > method for power button. [..] > This change gets rid of the generic hardware power button from all > google mainboards and relies completely on the fixed hardware power > button. The same problem exists with the AMD Hudson devices in coreboot. For AMD Hudson (2) and Yangtze based devices this was removed in commit 44f2fab8 (AMD hudson and yangtze boards: Let mainboard declare power button) [2]. Two devices are detected. $ dmesg | grep Button [ 0.209213] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.209254] ACPI: Power Button [PWRB] [ 0.209332] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.209349] ACPI: Power Button [PWRF] $ sudo evtest No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: Power Button /dev/input/event1: Power Button [..] [1]: https://review.coreboot.org/5546 [2]: https://review.coreboot.org/27272 Change-Id: I0cbecb72f7e1bf3d051d3b7656c6af4d6f43b497 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/27496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-05-20mb/google/hatch: Change SD_CD# reset config to PLTRSTKrishna Prasad Bhat
The system should boot fine to OS on pressing power button before the system enters G3. However, on hatch, we observe that the system waits for few seconds at "Starting kernel" and then resets, with SD card tray inserted and SD_CD# pad reset config set to DEEP. Hence configuring SD_CD# pad reset config to PLTRST. BUG=b:129933011 TEST=Built and verified on hatch. Change-Id: Ic4466b96332f095ff39b28d98607e95fc3d12d6a Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20soc/intel/braswell/pmutil.c: Use GEN_PMCON1 for RTC statusFrans Hendriks
cbmem_find is not available in every stage. Remove usage of cbmem_find() and use GEN_PMCON1 always. BUG=NA TEST=Booting Embedded Linux on Facebook FBG-1701 Change-Id: Id97d57864b3e241e8f046d9b1caebdce199a46b1 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-20mb/google/octopus: Override emmc DLL values for CastaJamie Chen
New emmc DLL values for Casta BUG=b:122307918 TEST=Boot to OS on 12 systems Change-Id: Ie51885fb9628fa093ecc38f4a3f3157f751ca9ab Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-05-20security/vboot/vboot_crtm.h: Remove ENV_ for vboot_measure_cbfs_hook()Frans Hendriks
vboot_measure_cbfs_hook() is included when CONFIG_VBOOT_MEASURED_BOOT is enabled, but this function is defined as 0 in vboot_crtm.h using ENV_ Remove ENV_ for vboot_measure_cbfs_hook() function definition. This function is added to bootblock stage also. BUG=NA TEST=Build Google Banon and Google Cyan Change-Id: Ic62c18db09c119dfb85340a6b7f36bfd148aaa45 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-20vboot: save whether developer mode is enabledJoel Kitching
Save whether or not vboot has selected developer mode as a flag in vboot_working_data. Other coreboot code may access this flag without needing to consult vboot_handoff (which is in the process of being deprecated). BUG=b:124141368, b:124192753 TEST=make clean && make test-abuild BRANCH=none Change-Id: Ieb6ac4937c943aea78ddc762595a05387d2b8114 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-20src/Kconfig: Move DRAM section to src/lib/KconfigElyes HAOUAS
These Kconfigs are mostly used in src/lib/. Change-Id: I7aa5436c6ff5fef53fde2081e902d793f3581c1e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32882 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-19timestamp: Update TIMESTAMP_CACHE_IN_BSS to include ENV_POSTCARFurquan Shaikh
With CB:32726 ("lib/timestamp: Make timestamp_sync_cache_to_cbmem() in postcar") timestamps are synced from cache to cbmem in postcar as well. For postcar, the cache lives in BSS just like ramstage. This change updates TIMESTAMP_CACHE_IN_BSS to include both ramstage and postcar and uses this instead of ENV_RAMSTAGE to check for cache location. Ideally, it would be good to get rid of timestamp cache in postcar and ramstage completely since early cbmem init is enabled by default in coreboot and it is guaranteed that cbmem is recovered before timestamps are added in ramstage or postcar. This change is being pushed in as a temporary fix while I make the changes to remove timestamp cache from romstage and postcar completely. BUG=b:132939309 Change-Id: I2d82a96aba954df77c9386b7bd2e2ec0973881be Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-05-18vendorcode/google/chromeos: Correct VPD field for MAC passthroughSimon Glass
The VPD field name is dock_passthrough, not dock_passthru. Fix it. (I assume there is no length limit) BUG=b:132689337 TEST=check that the feature can now be controlled by the associated enterprise policy Change-Id: Icc2b070313fde74447279cd6ccaa4e3eb6d119ee Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32839 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-18SMBIOS: Fix SPD manufacture ID decoderLijian Zhao
According to JEP106 from JEDEC, fix manufacture ID of Crucial, Super Talnet and Micron. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I10a268a7f3bde405b95bd3a16d5d121be623c7ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/32837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-18soc/intel: Fill DIMM serial number from SPDDuncan Laurie
Fill the DIMM serial number field for SMBIOS from the saved SPD data that is returned by FSP. BUG=b:132970635 TEST=This was tested on sarien to ensure that SMBIOS type 17 filled the serial number from the DIMM: Handle 0x000B, DMI type 17, 40 bytes Memory Device Locator: DIMM-A Serial Number: 41164beb Change-Id: I85438bd1d581095ea3482dcf077a7f3389f1cd47 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-18mb/google/sarien: Set serial number in SMBIOSDuncan Laurie
Set the system serial number from the VPD key "serial_number" and the mainboard serial number from the VPD key "mlb_serial_number". BUG=b:132970635 TEST=check serial number is set in SMBIOS based on VPD, and if there is no VPD key found then it is empty. Change-Id: Ia8f1486dcb1edc968b8eb1e6d989b10c05913aca Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-17soc/qualcomm/sdm845: Fix broken KconfigPatrick Rudolph
This fixes the following changes, which made qualcomm Kconfig appear on all platforms: bd0b51c0be1ec2c9a5f02de3c13108c13941e2c2 7a3e46d767890f502b09771e19decc5033e27079 Use proper Kconfig logic. Change-Id: I0195fd186ac39dd4258fe0781dd6d3d1b1d1679f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32805 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-17src/include/assert.h: add noreturn attribute to dead_code()Alan Green
Clang does not recognize dead_code() as termination of execution. It gives this message: error: control reaches end of non-void function [-Werror,-Wreturn-type] This change adds an __attribute__((noreturn)) to ensure that clang recognises that this function will terminate execution. This change is more general solution to the problem that was addressed in the specific at https://review.coreboot.org/c/coreboot/+/32798 Signed-off-by: Alan Green <avg@google.com> Change-Id: I5ba7189559aa01545d5bbe893bced400a3aaabbb Reviewed-on: https://review.coreboot.org/c/coreboot/+/32833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-16nb/intel/sandybridge: Move DMI init codePatrick Rudolph
Move the DMI initialization code to northbridge folder. Leave southbridge specific settings in bd82x6x folder and call it from northbridge code. Tested on Lenovo T520 (Intel Sandy Bridge). Still boots to OS, no errors visible in dmesg. Change-Id: Ib0b47391f3309f9ab0c3a3a8d525f38f8cca73c0 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-16sb/intel/bd82x6x/early_pch: Make use of RCBA and DMIBAR marcrosPatrick Rudolph
Use RCBA and DMIBAR macros to get rid of DEFAULT_RCBA and DEFAULT_DMIBAR. Tested on Lenovo T520 (Intel Sandy Bridge). Still boots to OS, no errors visible in dmesg. Change-Id: Ic9be2240ea10b17c8cc289007dccadbb9e3f69ab Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-05-16sb/intel/sandybridge/early_pch: Make DMI init more readablePatrick Rudolph
Add a few comments and use known register values. Based on the "2nd Generation Intel® Core™ Processor Family Mobile" datasheet and the existing serialice trace. Tested on Lenovo T520 (Intel Sandy Bridge). Still boots to GNU/Linux. Change-Id: I404515b77a22324f55581f117d79630be4ba64dd Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32071 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-16mb/gigabyte/ga-b75m-d3{h,v}: Various cleanupsAlex James
- Enable LPC TPM support in Kconfig and add pc80/tpm to devicetree - Enable VBT support in Kconfig and add VBT files extracted from vendor firmware - Remove IGPU VBIOS entries from Kconfig - Remove unused PS2 definitions in superio.asl - Add PWRB ACPI device entry to mainboard.asl - Remove duplicate chipset register initialization from mainboard.c - Move ITE Super I/O configuration to mainboard_config_superio in romstage.c Signed-off-by: Alex James <theracermaster@gmail.com> Change-Id: I2d11c55dc809b920bccf55f5f745d9f29b18bbb6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-16soc/qualcomm/common: replace IS_ENABLED(CONFIG_*) with CONFIG()Patrick Georgi
That's how we do it these days. Change-Id: I1c088d23dff709bcdcb21310059e6a2aab84c0be Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-16mb/ocp/monolake: replace IS_ENABLED(CONFIG_*) with CONFIG()Patrick Georgi
That's how we do it these days. Change-Id: I6bf6460440d0f2e6973734ba8894a4be981d03c5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32812 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-16{arch,cpu}/x86, drivers/intel: Restore cpu_index error handlingJacob Garber
Previously cpu_index() always succeeded, but since commit 095c931 (src/arch/x86: Use core apic id to get cpu_index()) it is now possible for it to indicate an error by returning -1. This commit adds error handling for all calls to cpu_index(), and restores several checks that were removed in commit 7c712bb (Fix code that would trip -Wtype-limits) but are now needed. Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I5436eed4cb5675f916924eb9670db04592a8b927 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-05-16mb/google/sarien: leave gpio pads unlocks during fspJett Rink
The FSP will lock down the configuration of GPP_A12, which makes the configuration of the GPIO pin on warm reset not work correctly. This is only needed for the Arcada variant since it is the only variant that uses ISH. BRANCH=sarien BUG=b:132719369 TEST=ISH_GP6 now works on warm resets on arcarda Change-Id: Icb3bae2c48eee053189f1a878f5975c6afe51c71 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32831 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-16soc/amd/stoneyridge: Move I2C bus clear out of gpio.cMarshall Dawson
Relocate the I2C bus reset code from gpio.c to i2c.c. When it first went in, gpio.c was a natural location due to the nature of the algorithm. This is preparation for moving most of gpio.c to common code. Change-Id: I3b2d8e1b54e7c5929220d763bd99fe01b0636aaa Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32650 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-16soc/amd/common: Create AcpiMmio functionality from stoneyridgeMarshall Dawson
Move the stoneyridge AcpiMmio code into soc/amd/common. The SB800 southbridge introduced the MMIO hardware blocks at 0xfed80000 commonly known as AcpiMmio. Implementations beginning with Mullins enable decode in PMx04. Older designs use PMx24 and allow for configuring the base address. Future work may support the older version. Comparing the documentation for AMD's RRGs and BKDGs, it is evident that the block locations have not been reassigned across products. In some cases, address locations are deprecated and new ones consumed, e.g. the early GPIO blocks were simpler at offset 0x100 and the newer GPIO banks are now at 0x1500, 0x1600, and 0x1700. Note: Do not infer the definitions within the hardware blocks are consistent across family/model products. BUG=b:131682806 Change-Id: I083b6339cd29e72289e63c9331a815c46d71600d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32649 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-16soc/intel/skylake: Correct GPIO pointer assignmentJacob Garber
We need to store the acpi_gpio struct, not save its address. Found-by: Clang Static Analyzer Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I41c8bf10ce72bec736da97ccc33f9ada49804dc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-16drivers/elog: Rename ramstage_elog_add_boot_count() to elog_add_boot_count()Subrata Banik
This patch removes ramstage_ prefix from ramstage_elog_add_boot_count() function. Change-Id: Ia75b2dc959ace7dc26dc974c5f4b5cb6c5a25617 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com>
2019-05-16Remove remaining unnecessary ENV_RAMSTAGE guardSubrata Banik
TEST=Able to build coreboot for CML. Change-Id: I8a6a97d59277ebfc498c83bb039436ed7c89d2cd Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com>
2019-05-15src/mainboard: Remove unneeded include <arch/io.h>Elyes HAOUAS
Change-Id: I73c557d6ef009fb2cac35fdea500dee76f525330 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-15src/northbridge: Remove unneeded include <arch/io.h>Elyes HAOUAS
Change-Id: I52ace93ae6f802723823955ac349ed54dc064aaa Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-15src/soc: Remove unneeded include <arch/io.h>Elyes HAOUAS
Change-Id: I5a7b53a07fe6fd6121067dcec004e81eb284edbb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-15src/southbridge: Remove unneeded include <arch/io.h>Elyes HAOUAS
Change-Id: If358e221021466f0058bfc84a322750b34a36d5f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-15soc/intel/broadwell/romstage: Clean up unused bist variableArthur Heymans
Checking BIST is done in the bootblock. Change-Id: I3ea2eb6a37c038f7348f0abd2056eee5c07bdb9d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32757 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-15soc/intel/broadwell: Enable LPC/SIO setup in bootblockArthur Heymans
This allows for serial console during the bootblock and enables bootblock console by default. Change-Id: I7746e4f819486d6142c96bc4c7480076fbfdfbde Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-05-15nb/intel/broadwell: Add an option for where verstage startsArthur Heymans
Previously broadwell used a romcc bootblock and starting verstage in romstage was madatory but with C_ENVIRONMENT_BOOTBLOCK it is also possible to have a separate verstage. This selects using a separate verstage by default but still keeps the option around to use verstage in romstage. With a separate verstage the romstage becomes an RW stage. The mrc.bin however is only added to the RO COREBOOT fmap region as it requires to be run at a specific offset. This means that coreboot will have to jump from a RW region to the RO region for that binary and back to that RW region after that binary is done initializing the memory. Change-Id: I900233cadb3c76da329fb98f93917570e633365f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30384 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 08:30:02 +0000