summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2015-08-19AMD ROMSIG: Only check location if ROMSIG is usedMartin Roth
The location of the AMD ROMSIG binary was being checked and warnings were being printed even when the ROMSIG file wasn't being used. These false warnings are avoided by moving the warnings into the block where the CBFS file for the ROMSIG is generated. Change-Id: Ie44a2ad97ff3b15df6dc9b8166992de6ed837997 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11161 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-18northbridge/amd/amdfam10: Redirect legacy VGA memory access to MMIOTimothy Pearson
Commit 27baa32 (cpu/amd/model_10xxx: Do not initialize SMM memory if SMM is disabled) deactivated TSeg SMRAM, which had the side effect of routing legacy VGA memory access to DRAM. Restore the correct MMIO mapping via the MMIO configuration registers. TEST: Booted KGPE-D16 with nVidia 7300LE card and verified proper VGA functionality. Change-Id: Ie4b7c0b2d6f9a02af9a022565fe514119513190a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11240 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-17Fix Kconfig: ALWAYS_LOAD_OPROM has unmet dependency VGA_ROM_RUNMartin Roth
Broadwell and Skylake chipsets, along with a few mainboards were selecting ALWAYS_LOAD_OPROM without making sure that the dependency for that symbol was met as well. Looking at the dependencies for VGA_RUN_ROM, we see: PCI && !PAYLOAD_SEABIOS && !MAINBOARD_DO_NATIVE_VGA_INIT Since ARCH_X86 selects PCI, that's always met here. Since Broadwell and Skylake don't have native VGA init yet, that's not needed. - Make sure that VGA_RUN_ROM is selected as well. - Add dependency on !PAYLOAD_SEABIOS for both ALWAYS_LOAD_OPROM and VGA_RUN_ROM symbols where they're selected. Fixes Kconfig warning for these boards and chipsets: warning: (BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS) selects ALWAYS_LOAD_OPROM which has unmet direct dependencies (VGA_ROM_RUN) Change-Id: I787a87e9467e1fc7afe8b04864b2a89b54824b9f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11246 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-17soc/intel/skylake/Kconfig: Fix recursive Kconfig dependencyMartin Roth
Change the dependency on CONSOLE_SERIAL to select CONSOLE_SERIAL based on this question. The dependency was causing multiple warnings on every platform tested. src/console/Kconfig:21:error: recursive dependency detected! src/console/Kconfig:21: symbol CONSOLE_SERIAL depends on DRIVERS_UART_8250MEM src/drivers/uart/Kconfig:16: symbol DRIVERS_UART_8250MEM is selected by UART_DEBUG src/soc/intel/skylake/Kconfig:198: symbol UART_DEBUG depends on CONSOLE_SERIAL Change-Id: Ia0426cd150561694081b5ea7c6797d36022c1f57 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11243 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-08-17AMD Binary PI: Fix the build when the user's group has a spaceDan Christensen
When the user's primary group contains a space ls -l and awk get the wrong value for the file size. This results in padding the coreboot_psp_directory_combine_pubkey.bin file too much which ultimately means RtmPubSigned.key can not be placed at the necessary offset. Changing from ls -l to ls -ln seemed like the most minimal, POSIX-friendly way to effect this change. Change-Id: Icbeaad476753924626adb6de53dc9a30052d91a6 Signed-off-by: Dan Christensen <opello@opello.org> Reviewed-on: http://review.coreboot.org/11242 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-08-14acpi: 64bit fixesStefan Reinauer
Change-Id: I5d0c95af7d35115b5ac4141489caceef4ee1c8bb Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11088 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14emulation/qemu: Serialize IQCR methodPaul Menzel
Fix the remark below for the mainboards qemu-i440x and qemu-q35. Intel ACPI Component Architecture ASL+ Optimizing Compiler version 20150717-32 Copyright (c) 2000 - 2015 Intel Corporation dsdt.aml 336: Method(IQCR, 1, NotSerialized) { Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within) ASL Input: dsdt.aml - 399 lines, 16756 bytes, 245 keywords AML Output: dsdt.aml - 4000 bytes, 146 named objects, 99 executable opcodes Compilation complete. 0 Errors, 0 Warnings, 1 Remarks, 233 Optimizations Change-Id: Ibe48f872768ab8295d6fed3359d9eef04b736a05 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11162 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-14glados: make EC_SCI_L workAaron Durbin
In order for the EC_SCI_L to work the GPE0 route needs to be set along w/ the GPE event for the EC. As the GPE0 route is dynamic the EC_SCI_GPI needs to be set along with the route so everything lines up. In this case, the GPE0 route is set to the defaults such that GPP_C, GPP_D, and GPP_E are routed to GPE0 block 0, 1, and 2, respectively. This works out for glados because the EC_SCI_L is connected to GPP_E16. BUG=chrome-os-partner:43778 BRANCH=None TEST=Built and booted glados. The 'acpi' interrupt in /proc/interrupts is incrementing as well as /sys/firmware/acpi/interrupts/gpe50. Original-Change-Id: I71fc4bec124f3ac87453a099412154e67aba6280 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/292011 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Idbb6d29364655537abc9ae6f012b3abb38edf138 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11210 Tested-by: build bot (Jenkins)
2015-08-14glados: make EC_SMI_L functionalAaron Durbin
Set the EC_SMI_GPI define to be GPP_E15 and route that GPIO for SMI generation. Also, the mainboard_smi_gpi_handler() was introduced on skylake in order to process any GPI that could generate an SMI. Switch to this handler so one can process the appropriate events. BUG=chrome-os-partner:43778 BRANCH=None TEST=Used 'lidclose' on EC command line during depthcharge to confirm EC_SMI_L generates SMI and shutdown happens. Original-Change-Id: Ia365b86161670a809e3fa99dde38fccc612d5e77 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291934 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ic16ea8e8d6ff564977ed2081d2353c82af71adea Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11209 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: fix SMI GPI status handlingAaron Durbin
The current construction for processing SMI GPI events didn't allow for the mainboard to query the state of a particular GPI for the snapshotted SMI event. The skylake part can route GPIs from any (there are design limitations) GPIO group. Those status and enable registers are within the GPIO community so one needs to gather all the possibilities in order to query the state. The call chain did this: southbridge_smi_gpi( clear_alt_smi_status() -> reset_alt_smi_status() -> print_all_smi_status() -> return 0) As a replacement the following functions and types are introduced: struct gpi_status - represent gpi status. gpi_status_get() - per gpi query on struct gpi_status gpi_clear_get_smi_status() - clear and retrieve SMI GPI status mainboard_smi_gpi_handler() - mainboard handler using gpi_status Also remove gpio_enable_all_smi() as that construct was never used, but it also is quite heavy handed in that it would enable SMI generation for all GPIs. BUG=chrome-os-partner:43778 BRANCH=None TEST=Built. Original-Change-Id: Ief977e60de65d9964b8ee58f2433cae5c93872ca Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291933 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ida009393c6af88ffe910195dc79a4c0d2a4c029e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11208 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: enable SMI routed GPIsAaron Durbin
The first pass of the GPIO configuration patch didn't enable the SMI# generation for GPIs marked as SMI routed. Now when a pad is configured as SMI routed the bit for the SMI enablement is set accordingly. BUG=chrome-os-partner:43778 BRANCH=None TEST=Built and booted glados. Confirmed SMI_EN being set for SMI routed GPIOs. Original-Change-Id: I796b68accb7a49b03ef18539861e72fa9d169c26 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/292010 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I3be770234d3f605ae630ecd5cd4cfe4867243999 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11207 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: clarify and fix gpio macrosAaron Durbin
The gpio pad configuration currently defaults to ACPI owned GPIs. A '0' was used which wasn't so clear. Add a comment and explicitly set it to ACPI. Also, PAD_CFG_GPI_ACPI_SMI wasn't using the _PAD_CFG_ATTRS macro which causes compliation errors if attempted to be instantiated. No piece of code tried to use it so the error was overlooked. Lastly, allow for soc/gpio.h to be included during ASL compilation. That allows for gpio_defs.h to be included and those macros utilized without needing to know the file name and where it lives; just use the generic gpio.h. BUG=chrome-os-partner:43778 BRANCH=None TEST=Built and booted glados. Original-Change-Id: I9dbadb0b494683ab38babfc1ac5e13093ee37730 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291935 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Id4fa8b65ec1e1537dbf09824c2155119a768807e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11206 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: provide clarification for FADT gpe0_blk_lenAaron Durbin
Instead of using a hard-coded value leverage the existing definitions to perform GPE0 block length calculations. There are 4 pairs of 32-bit status/enable registers. BUG=chrome-os-partner:43522 BRANCH=None TEST=Built and booted glados. Original-Change-Id: I14d08298b5750c91ce0ac3fa33569813396f7089 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291932 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I127f026f15180fa79625d4cad96d5e35f85e5090 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11205 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: remove ec_smi_gpio and alt_gp_smi_enAaron Durbin
The ec_smi_gpio and alt_gp_smi_en devicetree options are goign to be removed. The plan for skylake is to set the settings by the mainboard through either gpio pad configuration or through helper functions. Moreover, these values only allow *1* SMI GPIO configuration in that the following has to be true: alt_gp_smi_en = 1 << (ec_smi_gpio % 24) If not, then another gpio(s) from the same group has the SMI_EN bit set for it. Lastly, remove all the subsequent dependencies as they are no longer used: enable_alt_smi() and gpio_enable_group(). BUG=chrome-os-partner:43778 BRANCH=None TEST=None Original-Change-Id: I749a499c810d83de522a2ccce1dd9efb0ad2e20a Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291931 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I2e1cd6879b76923157268a1449c617ef2aada9c4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: provide GPE0 routing devicetree configurationAaron Durbin
On skylake the GPE0 routing can be dynamically changed to a particular GPIO group. Provide the ability for the mainboard to set the route accordingly. If any of the values in the devicetree are the same the current setting in the PMC register is used. The GPIO communities need to have matching configuration for the plumbing to work properly. BUG=chrome-os-partner:43778 BRANCH=None TEST=Built and booted glados w/ and w/o devicetree changes. Fields are set accordingly. Original-Change-Id: I263d648c8ea8a70b21570f01b333d05a5fa2a4e3 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291930 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I966d38bc197dbb52a2ba50927c06e243e169afbe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11203 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: remove IedSize from chip.hAaron Durbin
IedSize is not used in replace of IED_REGION_SIZE. Drop it from chip.h. BUG=chrome-os-partner:43636 BRANCH=None TEST=Built, booted, suspended, resumed on glados. Original-Change-Id: I38f6518701306c0ffc6d2b2e3fe01624a5eadf54 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290933 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Trybot-Ready: David James <davidjames@chromium.org> Change-Id: I9dd9e689d4d4f7b4770369dcd042d3325990ae32 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11201 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14kunimitsu sklrvp: remove unused IedSizeAaron Durbin
The skylake code is using IED_REGION_SIZE instead of devicetree.cb. Drop the the option from the device trees. BUG=chrome-os-partner:43636 BRANCH=None TEST=None Original-Change-Id: Ib252266060fbc6ed0eeaac19a6b79c173c6c9a13 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290932 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Trybot-Ready: David James <davidjames@chromium.org> Change-Id: Ib08628e163ac27d4c49eddcbec6cab3252abd4aa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11200 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: pass IED_REGION_SIZE Kconfig to FSPAaron Durbin
Ignore the devicetree.cb setting and use the already existing IED_REGION_SIZE Kconfig option. BUG=chrome-os-partner:43636 BRANCH=None TEST=Built, booted, suspended, resumed on glados. Original-Change-Id: Ic1e760493635218faddeee4003303949305bc529 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290931 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Trybot-Ready: David James <davidjames@chromium.org> Change-Id: I416d4eb186a42d3258682e02a0a2e1db5bb668ac Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11199 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14intel/common: fix stage_cache_external_region()Aaron Durbin
The stage_cache_external_region() calculation is actually dependennt on the properties of the chipset. The reason is that certain regions within the SMRAM are used for chipset-specific features. Therefore, provide an API for abstracting the querying of subregions within the SMRAM. The 3 subregions introduced are: SMM_SUBREGION_HANDLER - SMM handler area SMM_SUBREGION_CACHE - SMM cache region SMM_SUBREGION_CHIPSET - Chipset specific area. The subregions can be queried using the newly added smm_subregion() function. Now stage_cache_external_region() uses smm_subregion() to query the external stage cache in SMRAM, and this patch also eliminates 2 separate implementations of stage_cache_external_region() between romstage and ramstage. BUG=chrome-os-partner:43636 BRANCH=None TEST=Built, booted, suspended, resumed on glados. Original-Change-Id: Id669326ba9647117193aa604038b38b364ff0f82 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290833 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Idb1a75d93c9b87053a7dedb82e85afc7df6334e0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11197 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: use smm_subregion() during SMM relocationAaron Durbin
The smm_subregion() support allows the SMM relocation to not use duplicated math by calling out the specific regions it wants. IED base is now correct and not pointing outside from SMRAM. BUG=chrome-os-partner:43636 BRANCH=None TEST=Built, booted, suspended, resumed on glados. Original-Change-Id: Ief8940c2ab6320449500ced2121d0cd7ed73af4b Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290930 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Trybot-Ready: David James <davidjames@chromium.org> Change-Id: I00c3284cfacb2a73942640ccfa7912b7d65efb9d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11198 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14intel/common: use external stage cache for fsp_ramstageAaron Durbin
The fsp_ramstage.c code was not taking advantage of the stage cache which does all the accounting and calculation work for the caller. Remove the open coded logic and use the provided infrastructure. Using said infrastructure means there's no need for the FSP_CACHE_SIZE Kconfig variable. Therefore, remove it. BUG=chrome-os-partner:43636 BRANCH=None TEST=Built, booted, suspended, and resumed on glados. Original-Change-Id: I4363823c825b4a700205769f109ff9cf0d78b897 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290831 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ifd3cc4a538daac687949c5f4cab2c687368d6787 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11196 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: clean up SMM region calculationsAaron Durbin
The TSEG is defined to be from TSEG->BGSM in the host bridge registers. Use those registers at runtime to calculate the correct TSEG size. Lastly, use a few helper macros to make constants more readable. BUG=chrome-os-partner:43522 BRANCH=None TEST=Built, booted, suspended, resumed on glados. Original-Change-Id: I6db424a0057ecfc040a3cd5d99476c2fb8f5d29b Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290832 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I6890fa450ce8dc10080321aa1a7580e0adc48ad5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11195 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14fsp1_1: fsp_relocate: use struct region_device and struct progAaron Durbin
Using struct prog and struct region_device allows for the caller to be none-the-wiser about where FSP gets placed. It also allows for the source location to be abstracted away such that it doesn't require a large mapping up front to do the relocation. Lastly, it allows for simplifying the intel/commmon FSP support in that it can pass around a struct prog. BUG=chrome-os-partner:43636 BRANCH=None TEST=Built, booted, suspended, and resumed on glados. Original-Change-Id: I034b04ab2b7e9e01f5ee14fcc190f04b90517d30 Original-Signed-off-by: Aaron Durbin <adurbin@chroumium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290830 Original-Tested-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org> Change-Id: Ibe1f206a9541902103551afaf212418fcc90e73c Signed-off-by: Aaron Durbin <adurbin@chroumium.org> Reviewed-on: http://review.coreboot.org/11193 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14stage_cache: make prog const in stage_cache_add()Aaron Durbin
The stage_cache_add() function should not be manipulating the struct prog argument in anyway. Therefore, mark it as const. BUG=chrome-os-partner:43636 BRANCH=None TEST=Built, booted, suspended, and resumed on glados. Original-Change-Id: I4509e478d3c98247b9d776f6534b949d9ba6282c Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290721 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ibadc00a9e1cbbf12119def92d77a79077625fb85 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11192 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14Skylake: Add ASL code to enable GPIO controllerArchana Patni
This patch enables GPIO controller for skylake. It adds community base addresses and offset for Community0, Community1, and Community3. Community2 is not exposed in BIOS or enabled in the kernel driver. Also, clean up the carry over GWAK implementation from BDW. BRANCH=None BUG=chrome-os-partner:42393 TEST=cat /sys/kernel/debug/gpio should list of GPIOs TEST=export a GPIO pin using /sys/class/gpio/export Original-Change-Id: I891c40589d3dbd796cf593626472c7b5674a1ae0 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/291230 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org> Change-Id: I7481ce682ccae872fddf81b3188c3415d5d3f7d9 Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Reviewed-on: http://review.coreboot.org/11191 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14intel/common: use acpi_is_wakeup_s3() in fsp_ramstage.cAaron Durbin
acpi_is_wakeup_s3() was introduced in upstream coreboot while the FSP support code was written. Move to using that instead of using the romstage_handoff structure directly. BUG=chrome-os-partner:43636 BRANCH=None TEST=Built, booted, suspended, and resumed on glados. Original-Change-Id: I71601a4be3c981672e25e189c98abb6a676462bf Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290720 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I2ae4d9906e0891080481fb58b941921922a989d3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11190 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: clear write-1-to-clear fields in power regsAaron Durbin
Explicitly clear all write-1-to-clear fields in the appropriate power state registers. That way stale state isn't left around from boot to boot. The MMIO PMC registers are always added such that the resource can be accessed from reg_script. It doesn't hurt to add the resource, and it's actually more informative by attaching the actual resources owned by the device. BUG=chrome-os-partner:43625 BRANCH=None TEST=Built and boot glados. Did global reset. Noticed bits set. Did normal reset and saw those same bits no longer set. Original-Change-Id: Idd412bd6bf2c6c57b46c74f9411bdf8413ddd83e Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290339 Change-Id: Ibef1aefedf6ba006f17f9f94998a10b39cc6bfec Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11186 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: fix invalid GNVS base addressAaron Durbin
Leaving a sentinel 0xC0DEBABE and fixing it up is is the old way of setting the correct base address for GNVS. One just needs to reference NVSA which is already filled in by the skylake ACPI code. BUG=chrome-os-partner:43611 BUG=chrome-os-partner:43522 BRANCH=None TEST=Built and booted glados. /sys/firmware/log shows up as well as ramoops using the correct address. Original-Change-Id: I1d4979b1bb65faa76316a4ec4c551a7b9b9eed32 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290338 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I25efea73a383215f9365ce91230f79516b0201a6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11185 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: enumerate the SMI status fieldsAaron Durbin
Provide #defines for the bit fields in the SMI status register. This allows for one to set the callback accordingly without hard coding the index. BUG=chrome-os-partner:43522 BRANCH=None TEST=Built and booted glados. Original-Change-Id: I3e61d431717c725748409ef5b543ad2eb82955c4 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289802 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I1a91f2c8b903de4297aaa66f5c6ff15f1b9c54f6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11184 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: set DISB in GEN_PMCON_A register properlyAaron Durbin
DISB (bit 23) in GEN_PMCON_A represents to MRC that DRAM training is complete. However, as a 8-bit write was being performed the bit was never being set. BUG=chrome-os-partner:43516 BRANCH=None TEST=Built and booted to kernel. Rebooted. Noted full memory training was not being peformed. Original-Change-Id: If2a9cc2f80bc38ea86fb0d7ff855ef95540b561b Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290337 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ic7973e0ec279304797e0b3d83d7378f620f2b548 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11183 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: fill out gen_pmcon_* bitfieldsAaron Durbin
Open coding bitfields is really annoying as no one knows what they are unless you have a doc in front of you. Fill in the bitfields for the GEN_PMCON_A and GEN_PMCON_B registers. BUG=chrome-os-partner:43522 BRANCH=None TEST=Built and booted glados. Original-Change-Id: Id48de68eaa3896c17d5da2ffb0bcf17062f73e5e Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290336 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I968be9736419e26a771e0a0c3c964d540fbb1efe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11182 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14glados: enable SMBus deviceAaron Durbin
In order to run with the debug FSP the SMBus device needs to be enabled. Additionally, the TCO block lives within the SMBus device so if TCO is to be employed then the SMBus device needs to be enabled as a prerequisite. BUG=chrome-os-partner:42407 BRANCH=None TEST=Buit and booted into kernel. Original-Change-Id: I269650fa5222b4741ef495188dff1f4b8176fe89 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290364 Original-Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com> Change-Id: Ia1f72ea7bd70728de83cdff07df9810a326266c2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11181 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: do not overlap resourcesAaron Durbin
FSP was setting up the TCO registers to be mapped at 0x400. However, the SMBus initialization in romstage was mapping its I/O BAR to 0x400 as well. The result seemed to cause the TCO register to be hidden. However, the board was rebooting in depthcharge when the SMBus device was enabled from a TCO timeout. As the TCO timer was halted before the double resource assignment it's not clear how the TCO was getting re-enabled. In either case, the current behavior is wrong. BUG=chrome-os-partner:42407 BRANCH=None TEST=Built and booted glados w/ SMBus enabled. Original-Change-Id: I43c0d67a76abac51ccfd5105245792981fbcd04c Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290363 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I3839290768c27626c3fd2d67d5de94c291c1386e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11180 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: use native gpio configuration for uartAaron Durbin
Instead of open coding the UART2 gpio configuration use the support library. BUG=chrome-os-partner:42982 BRANCH=None TEST=Built and booted glados. Original-Change-Id: I9637cb995d51b67eb320650d92f8518de0280dca Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289801 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I7f0e6599df983323f773f1ec6600537c20c15b11 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11176 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14glados: move to native gpio configurationAaron Durbin
Instead of relying on FSP to do gpio configuration in one place use the native support in coreboot. This also removes the open coded configuration of the memory configuration ids. BUG=chrome-os-partner:42982 BRANCH=None TEST=Built and booted glados. Original-Change-Id: I4655221d821d91a2270d774305a02d6bd5c3959c Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289800 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I2e66242d050c3825f6bc65d3d2c7f51d2cdfbd73 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11175 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: provide native gpio functionalityAaron Durbin
It's important to be able to configure the gpio pads at various stages instead of a single place using FSP. Without this support there is a lot of duplicated open-coded pad configuration taking place both within the SoC code and mainboards. Current limitation is that all GPIOs are in ACPI mode. i.e. The HostSW ownership register sets the pad configuration to only update GPI_GPE_STS, GPI_NMI_STS and/or GPI_SMI_STS. The GPI_STS update is masked within the GPIO community registers. BUG=chrome-os-partner:42982 BRANCH=None TEST=Built and booted glados. Original-Change-Id: Id8a00e99c7a4c3912de2feaff9cea12b402f2c68 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289789 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I4c86b47ac5ab004f2bfd7cb07dd23c458f7dbb7c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11174 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14cpu/amd/model_10xxx: Do not initialize SMM memory if SMM is disabledTimothy Pearson
In the wake of the recent Intel "Memoy Sinkhole" exploit a code review of the AMD SMM code was undertaken. While native Family 10h support does not appear to be affected by the same SMM flaw, it also does not require SMM to function. Therefore, the SMM memory range initialization should only be executed if SMM will be used on the target platform. Change-Id: I6531908a7724933e4ba5a2bbefeb89356197e8fd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11211 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-08-13skylake: fix serial port with new code baseAaron Durbin
Many Kconfig options changed in coreboot.org since skylake was first started. Fix Kconfig option name changes, and also provide a common option, UART_DEBUG that can be selected to select all the necessary options. Note: It's still a requirement to manually unset the 8250IO option because that's unconditionally set. BUG=chrome-os-partner:43419 BUG=chrome-os-partner:43463 BRANCH=None TEST=Built glados. Booted into kernel. Kernel reboots somewhere. Original-Change-Id: I9e6549ea0f1d6b9ffe64a73856ec87b5bc7b7091 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289951 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I0e6b492d7279cc35d4fb3ac17fd727177adce39d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11172 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13glados: Enable wake from EC via LAN_WAKE#Duncan Laurie
Enable the Deep Sx pins to allow wake from the EC via LAN_WAKE#. Report the EC wake pin LAN_WAKE as GPE[112]. BUG=chrome-os-partner:43079 BRANCH=none TEST=suspend/resume on glados with wake from keyboard Original-Change-Id: I99664e1e406d15e7460046a6168cbd3a377aaca4 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/288921 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I19db144ed5db183f47af03340886a5e770af8bc8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/11171 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13skylake: Add Deep Sx configuration for wake pinsDuncan Laurie
Add support for enabling various pins in Deep Sx by setting a register in the mainboard devicetree. BUG=chrome-os-partner:43079 BRANCH=none TEST=build and boot on glados Original-Change-Id: I1b4fb51f72b88bdc49096268bdd781750dcd089d Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/288920 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I7555a92fecc6e78b579ec0bc18da202cb0c824e2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/11170 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13uart8250mem: provide uart_fill_lb()Aaron Durbin
There was no implementation for uart_fill_lb() in the 8250mem driver. Rectify this so when 8250MEM and CONSOLE_SERIAL are employed then the build doesn't fail. BUG=chrome-os-partner:43419 BRANCH=None TEST=Built with glados using 8250MEM Original-Change-Id: I35d6b15e47989c1854ddcee9c6d46711edffaf3e Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289899 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Change-Id: I972b069a4def666f509268816de91ed6c0f655d9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11169 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13skylake: remove CBFS_SIZE option in SoC directoryAaron Durbin
CBFS_SIZE is living as a mainboard attribute. Because of the Kconfig include ordering the SoC *cannot* set the default. Remove from the soc Kconfig and add a default Kconfig for SOC_INTEL_SKYLAKE. BUG=chrome-os-partner:43419 BRANCH=None TEST=built glados Original-Change-Id: I8808177b573ce8e2158c9e598dbfea9ff84b97c7 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289833 Original-Reviewed-by: Martin Roth <martinroth@google.com> Change-Id: Icf52d7861eee016a35be899e5486deb0924a0f3c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11168 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13skylake: fix garbled patch from upstreamAaron Durbin
In the review process for http://review.coreboot.org/#/c/11052/ the code was mangled and the result was unbuildable code. Fix this. BUG=chrome-os-partner:43419 BRANCH=None TEST=Can actually build bootblock. Original-Change-Id: I5bc63b8c435dbf025f1c334e9a1bc4a9da2b4902 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289788 Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Change-Id: Id0f67d8b74fa9146bf01990f599d538222f7e0e2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11167 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13x86: parameterize asl_template for CBFS inclusionAaron Durbin
The asl_template previously unconditionally included dsdt.aml. However, COMPILE_IN_DSDT=y results in the dsdt.aml being linked directly into ramstage. Thus the information is duplicated. The inclusion of this file unconditionally throws some errors as certain assets need to be included in CBFS. However, as there isn't fine-grained ordering control in how files are added fixed resource requirements for other assets collide result in failure to build. To remedy both things, provide a 2nd argument to asl_template which defaults to 'y' for CBFS addition. In the COMPILE_IN_DSDT=y case pass 'n' so that dsdt.aml is no longer added. BUG=chrome-os-partner:43419 BRANCH=None TEST=For glados: Built with COMPILE_IN_DSDT=y. dsdt.aml not included. Built with COMPILE_IN_DSDT=n. dsdt.aml was included. Original-Change-Id: I4767e5be2915c1732251fe415017f30314c5efc9 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289840 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Id1828627ba0a034eb05b2fe23be76e19f3040444 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11166 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-08-13soc/common/intel: Reset is not dependend upon FSPLee Leahy
Remove dependency of common reset code on FSP BRANCH=none BUG=None TEST=Build and run on Braswell and Skylake Original-Change-Id: I00052f29326f691b6d56d2349f99815cafff5848 Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/286932 Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I7f59f0aad7dfae92df28cf20fff2d5a684795d22 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: http://review.coreboot.org/11165 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2015-08-13amd: raminit sysinfo offset fixAaron Durbin
The sysinfo object within the k8 ram init is used to communicate progess/status from all the nodes in the system. However, the code was assuming where the sysinfo object lived in cache-as-ram. The layout of cache-as-ram is dynamic so one needs to do the lookup of the correct address at runtime. The way the amd code is compiled by #include'ing .c files makes the solution a little more complex in that some cache-as-ram support code needed to be refactored. Change-Id: I6500fa7b005dc082c4c0b3382ee2c3a138d9ac31 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10961 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13getac/p470: enable early cbmem initPatrick Georgi
Change-Id: I4afec92c57c6af4c99858afae53fa7746f47bc7a Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11159 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-13getac/p470: Enable native VGA initPatrick Georgi
Change-Id: I6c5a2324d1a9e21f4e052678be8f0e0dbfed6494 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11136 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-13getac/p470: Add C-State valuesPatrick Georgi
Derived from what the vendor BIOS is doing. Change-Id: Ie2cba7b86b6bb3f1dcc4a5e1c189aa45d0aab109 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Found-by: fwts 15.08 Reviewed-on: http://review.coreboot.org/11142 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-11getac/p470: Clean up SIO access in ACPIPatrick Georgi
This adapts Ia5101d5a1 for the p470. Change-Id: Ib09a0bc58fddd6240834cc890f00df91a74f4161 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11160 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 01:57:49 +0000