Age | Commit message (Collapse) | Author |
|
BIOS needs to set the bit mask which ports are iplemented on the
board. Without setting this option, seabios fails to boot from
SATA.
Change-Id: I21de3fde3a9cff7c590226f70fa549274f36e2a8
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/601
Tested-by: build bot (Jenkins)
|
|
i3100 misses the magic SATA init sequence, which makes all
requests fail. Captured from the vendor BIOS, which writes
those bits on all configurations.
Change-Id: I293b7d9cd681181311ecaced6d7df9b2706c711f
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/600
Tested-by: build bot (Jenkins)
|
|
CPUs with CPUID level >= 0x80000008 can return
the number of physical address bits.
Change-Id: I1c0523b6a091c476af838d173ed9030280360d7f
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/599
Tested-by: build bot (Jenkins)
|
|
Change-Id: I9761a8a9a7cc708fe95169cb8b79b413b97ee523
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/598
Tested-by: build bot (Jenkins)
|
|
Fix ordering of power/reset/undock procedure to prevent
crashes seen with the old code. Also call dlpc_init()
only once.
Change-Id: I27d1f42e845fcccde40e6ca5af4a7762edab5d36
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/597
Tested-by: build bot (Jenkins)
|
|
This makes resume from S3 work.
Change-Id: I472baf2fbde46bfac223ce39fc81b8e09849fb7f
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://review.coreboot.org/591
Tested-by: build bot (Jenkins)
Reviewed-by: Sven Schnelle <svens@stackframe.org>
|
|
Originally brought up by Sven Schnelle in March 2011
http://patchwork.coreboot.org/patch/2801/
http://www.coreboot.org/pipermail/coreboot/2011-March/064277.html
On some mainboards it may be neccessary to reset early during resume
from S3 if the SLFRCS register indicates that a memory channel is not
guaranteed to be in self-refresh.
On other mainboards, such as Lenovo X60 and T60, the check always
creates false positives, effectively making it impossible to resume.
The SLFRCS register is documented on page 197 of
Mobile Intel® 945 Express Chipset Family Datasheet
Document Number: 309219-006
which is publically available, and the register indicates if a memory
channel is guaranteed to be in self-refresh mode (if bit = 1), or that
a memory channel *may or may not be* in self-refresh mode (if bit = 0).
The register can thus only be used to positively learn that memory is
in self-refresh. It is not known for sure that memory is *not* in
self-refresh. The register is reset by the PWROK signal, which *should*
go low during S3, and go high again when resuming, so it is unsurprising
that SLFRCS has already been cleared when we read the register.
Sven's measurements of the CKE signal on a ThinkPad shows that memory
remains in self-refresh indefinitely, until coreboot re-initializes the
memory controller, even when SLFRCS bits were = 0.
Boards which require a warm reset when SLFRCS bits are cleared must now
explicitly enable the check in the mainboard Kconfig file.
This commit selects the new option in all existing i945 mainboards.
A follow-up commit will remove the option for ThinkPads.
Change-Id: I02320675efb8fde05c371ef243ba5093a4da6d11
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://review.coreboot.org/590
Tested-by: build bot (Jenkins)
Reviewed-by: Sven Schnelle <svens@stackframe.org>
|
|
Value required to get 115200 is actually 0, not 5.
Change-Id: Id1385822bf2213c035c4f378a72168ed6676ad03
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/592
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: build bot (Jenkins)
|
|
Coming changes to abuild require that VENDOR_ and BOARD_ names have
common suffixes.
Change-Id: I44cf759dd3b2d02c525eb325dc9c5c989f172ac5
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Reviewed-on: http://review.coreboot.org/548
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Add local vga.h for prototypes.
Change-Id: I5ff627c6420d4b7fd1bc9a537f406ef6d9597522
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/588
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add MSR register write for VGA memory setup
Add missing license
Add bit explanation
Change-Id: I1cb36eeccd84f0056c829f50d9864047654ce906
Signed-off-by: Nils Jacobs <njacobs8@adsltotaal.nl>
Reviewed-on: http://review.coreboot.org/580
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Moved the conditional compilation out of the source file
Change-Id: Ic4045006f39d70f4a0bc37d1bd5e073ed8477c68
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/578
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
AMD AGESA code to support Orochi platform family15 model 00-0fh processores,
AMD C32, G34, and AM3r2 Sockets are supported.
Change-Id: If79392c104ace25f7e01db794fa205f47746bcad
Signed-off-by: Kerry Sheh <kerry.she@amd.com>
Signed-off-by: Kerry Sheh <shekairui@gmail.com>
Reviewed-on: http://review.coreboot.org/554
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Make changes MPtable to match ACPI tables.
Change-Id: I387f301370582fcb5e0d348d793333a919d2f373
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: http://review.coreboot.org/575
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
RD890 CIMX support AMD RD890TV, RX780, RD780, SR56x0, RD890 and 990FX
chipsets, add their pci device id respectively.
Change-Id: I30c62c5802279ff2ee8da1cae41395e6899339bb
Signed-off-by: Kerry Sheh <kerry.she@amd.com>
Signed-off-by: Kerry Sheh <shekairui@gmail.com>
Reviewed-on: http://review.coreboot.org/558
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Fix the ACPI IRQ routing. Also. fix the SSDT generations and TOM2 fixup.
Change-Id: I03e6de7bb58440058306c9c9888eb2961748c385
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: http://review.coreboot.org/574
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Indentation fixes in src/arch/x86/lib/pci_ops_conf{1,2}.c
Change-Id: I56e8ff6d2ee3a0b871b40577e10c99dea4b3b1bd
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/576
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Indentation fixes in src/arch/x86/lib/pci_ops_mmconf.c
Change-Id: If8337bae06295db16ed1c129ab76dea37eb465ae
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/577
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Added a macro in the post code list, which replaces hard coded
value in cpu/x86/cache/cache.c
Change-Id: I27cb27827272584a8a17a41c111e2dc155196a97
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/572
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Few spelling fixes in entry16.inc
Change-Id: Iad3d18eee3f498171cb766589aaebefdcf0e9767
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/571
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Removed the prototype and restructured the code
Change-Id: I13a648acf7bae30635e0469e301ce5635d9d7a8c
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/570
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to use SSE+MMX optimized payloads we don't want to disable SSE+MMX
instructions in the CPU after romstage.
Change-Id: I51aeb01f04492ad7bc8b1fe181a4ae17fe0ca61e
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/553
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This cleans up the strings in romstage.c, removing the ugly "got past".
Also, cleaned up comments and some spacing.
Change-Id: I0124df76eb442f8a0009a31a8632e4fd67ed7782
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: http://review.coreboot.org/539
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Id34615f0c229d276d72cdf984cf82ea8cc1a85bb
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/523
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This line was unnecessary and was duplicated on several mainboards.
Change-Id: I438da05c770ded0bd32256f1c157cabcc383667a
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: http://review.coreboot.org/541
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The #define REQUIRED_CALLOUTS is no longer used on these platforms.
Change-Id: I536eb94119f1bc8f81e59ebefacdd4e04d0ed3ef
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: http://review.coreboot.org/540
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I1713f1a3b548cb8e8ea5cf57eef95486ceb05ab9
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: http://review.coreboot.org/538
Tested-by: build bot (Jenkins)
Reviewed-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There was no good way to extract the build version from an image.
This change will be mostly backward compatible: The only assumption
that could break is that the board name string ends directly before
the 3 dwords that represent .id's "header".
Change-Id: I325491a0c42911d9d6ecd59e21ee1b756c987693
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/537
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: build bot (Jenkins)
|
|
We used to put the id section at -0x10, with some boards overriding
this to avoid collisions with romstraps.
Hardcode the location at -0x80, at the possible expense of some space
(0x70 bytes).
This also makes the section easier to find in a binary image.
At some point, CONFIG_ID_SECTION_OFFSET can be removed, so this option
is moved to src/Kconfig.deprecated_options.
Change-Id: I6ce2d6e94e57717939bda070bfe0c9df80ca2a89
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/549
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
|
|
The current implementation calls die() if memory checking fails.
This isn't always what we want: one might want to print error registers,
or do some other error handling. Introduce ram_check_nodie() for that
reason. It returns 0 if ram check succeeded, otherwise 1.
Change-Id: Ib9a9279120755cf63b5b3ba5e0646492c3c29ac2
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/532
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
When CONFIG_EXPERT is set, compilation fails with:
src/superio/winbond/w83627hf/superio.c:61:13: error: ‘w83627hf_16_bit_addr_qual’ defined but not used [-Werror=unused-function]
cc1: all warnings being treated as errors
This function isn't used in the code, so just remove it.
Change-Id: I117e221fb3c3a20a7d7e7e2e86d7dbfdffc2cbff
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/533
Tested-by: build bot (Jenkins)
|
|
The current code uses static values for the physical address size
supported by a CPU. This isn't always the right value: I.e. on
model_6[ef]x Core (2) Duo CPUs physical address size is 36, while
Xeons from the same family have 38 bits, which results in invalid
MTRR setup. Fix this by getting the right number from CPUID.
Change-Id: If019c3d9147c3b86357f0ef0d9fda94d49d811ca
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/529
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I6b612dbd3eb6e8cc45f1c7abca85732fb64de98c
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/531
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
The comparision is the wrong way round: as long as tsc
is below tsc1, the timeout is not reached
Change-Id: I75de74ef750b5a45be0156efaf10d7239a0b1136
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/530
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: If681a33deb7df752b37c6a8a20482d3c374af936
Signed-off-by: Nils Jacobs <njacobs8@adsltotaal.nl>
Reviewed-on: http://review.coreboot.org/528
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
|
|
This function prevents the linker from choosing the right
get_cst_entries(), preventing writing the _CST tables.
Change-Id: I4bc0168aee110171faeaa081f217dfd1536bb821
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/496
Tested-by: build bot (Jenkins)
|
|
Change-Id: I6417a92523eea7307d080669fbc4e16ee28c8a6c
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/524
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Adds a missing return statment which will stop misleading the users
Change-Id: I53741f1136b396e9493ce959b54efc00c9b09764
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/522
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I5b99c531e44ea09990b9da0b97213fb7945f34ee
Signed-off-by: Nils Jacobs <njacobs8@adsltotaal.nl>
Reviewed-on: http://review.coreboot.org/512
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: Ie3872c57990f9784aafda14f8c7fc842b3a65260
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/518
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Marc Jones <marcj303@gmail.com>
|
|
Fixed indentation using indent tool in the src/drivers/i2c tree
Change-Id: I5b396e5753544aff13ac5d16afc59e193a6b1da1
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/506
Tested-by: build bot (Jenkins)
Reviewed-by: Kerry Sheh <shekairui@gmail.com>
Reviewed-by: Marc Jones <marcj303@gmail.com>
|
|
The AGESA wrapper init late call generates the SSDT and other ACPI tables. The
call was failing without heap space allocated causing the ASSERT messages in
the output. I think are there may still be other issues in integrating the
SSDT table with the DSDT, but now it is there to debug.
The changes were made in Persimmon and copied to the other Fam14 mainboards.
Change-Id: I2cfd14e07cb46d2f46f5a8cd21c4c9aab44e4ffd
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: http://review.coreboot.org/517
Tested-by: build bot (Jenkins)
Reviewed-by: Kerry Sheh <shekairui@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The old SSDT ACPI code would only include the AGESA or the coreboot SSDT. Now
include both. AGESA generates the Pstate SSDT and the second coreboot SSDT is
for TOM and TOM2. Now, generate the coreboot SSDT instead of patching it. This
fixes some ACPI errors in Linux and Windows bluescreens.
The Persimmon acpi_tables.c is where the main changes were made and then
replicated in the other Fam14 boards. Please test the other mainbords if you
have one.
Change-Id: I808c863597e024e3e8aeec0821e8618d96cc96a6
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: http://review.coreboot.org/516
Tested-by: build bot (Jenkins)
Reviewed-by: Kerry Sheh <shekairui@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Fix whitespace and tab issues on fam14 mainbords in preperations for upcoming
changes
Change-Id: I6d63d428dde0a5d9748027e603b03de25d3be472
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: http://review.coreboot.org/515
Tested-by: build bot (Jenkins)
Reviewed-by: Kerry Sheh <shekairui@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I059d5b155cae051f31cc2495f8a47d53e01af808
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/519
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
|
|
Add GNB internal graphic interrupt,
correct southbridge hd audio device interrupt. and remove the
dead code already commented out.
south_station, union_station, inagua, persimmon and e350m1 mainboard
are included herein.
Change-Id: Ic7618d80e0432ed0e22d1c16e1adb8ba6cea2e59
Signed-off-by: Kerry Sheh <shekairui@gmail.com>
Signed-off-by: Kerry Sheh <kerry.she@amd.com>
Reviewed-on: http://review.coreboot.org/451
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
|
|
Add interrupt routing for APU GNB internal Graphic and HD audio device, and
other pcie bridge device in GNB.
south_station, union_station, inagua, persimmon and e350m1 mainboard
are included herein.
Change-Id: I4b6e0fce8d34637c03de8ebfdadea008c98e193b
Signed-off-by: Kerry Sheh <shekairui@gmail.com>
Signed-off-by: Kerry Sheh <kerry.she@amd.com>
Reviewed-on: http://review.coreboot.org/452
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
|
|
Change-Id: I14f39b5666fc18e8183723ec78a40a849d337736
Signed-off-by: Nils Jacobs <njacobs8@adsltotaal.nl>
Reviewed-on: http://review.coreboot.org/511
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
|
|
I misunderstood how kconfig select works. It needs to be selected with a config option. Moved the select to the correct location.
Change-Id: If9b1e21e6cbc5af4671efb76cf87dd18dbbe2234
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: http://review.coreboot.org/487
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
trivial change in src/console/Kconfig
Change-Id: Ib6bb4ccfabaa3af18b48a23a51a576b872d807a8
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/505
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|