summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2018-04-13drivers/uart/pl011.c Add read supportMarcello Sylvester Bauer
Implement uart_rx_byte Change-Id: I5a33b3cd4b333fb244bc55747014a301021e25e0 Signed-off-by: Marcello Sylvester Bauer <info@marcellobauer.com> Reviewed-on: https://review.coreboot.org/25623 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-13siemens/mc_apl1: Fix accuracy issue with IDT PMICMario Scheithauer
Due to an accuracy issue on IMON in the IDT PMIC, the reported system power consumption was higher than the actual consumption. To prevent this problem, a logic must be implemented in mainboard_init(). This logic consists of slope and offset as constants for Vcc and Vnn, which need to be programmed by coreboot. This fix compensates for the accuracy issue. Change-Id: I77faf95951d03ac6ce97a6721dba6e8466122a25 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/25585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-04-13Revert "mb/google/reef: Override USB2 phy settings"Tim Chen
This reverts commit 70ba1b7e78930acca578114cdadcbcec367730e8. This commit can only pass far-end USB eye diagram but will fail on near-end. Confirmed with Intel we should revert it. Change-Id: I6de44d5240393409d9ec5835a9de0c23453300f7 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25630 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-13mb/google/kahlee: Fix IRQ routingRichard Spiegel
ACPI interrupt routing file routing.asl is not reflecting AGESA settings to the NB Interrupt Routing Registers. The AGESA settings are: Device self INTA INTB INTC INTD GPP 0 23 0 1 2 3 GPP 1 24 8 9 10 11 GPP 2 25 16 17 18 19 GPP 3 26 24 25 26 27 GPP 4 23 3 0 1 2 HDA none 22 23 20 21 GBIF none 6 7 4 5 Fix the routing table, considering that NB IOAPIC starts at interrupt 24. BUG=b:74104946 TEST=Build and boot to a modified grunt board to enable the emmc. Then used "cat /proc/interrupts" to get active interrupts. Also checked IOAPIC redirection registers, which are now being programmed. Change-Id: I60847c46f3f938f9e97d7b323b27d20e36aa2d02 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-133rdparty/libgfxinit: Update submodule pointerNico Huber
Update libgfxinit to current master. Changes include: * a fix to decode the size stolen memory correctly on pre-SandyBridge hardware, * a PCI id based generation check, obsoleting the old check based on PCH audio ids, * some minor improvements around rarely used DDI ports (D and E), and * added support for tiled and rotated framebuffers on Skylake+ hardware (less interesting for coreboot, I guess?). TEST=Booted kontron/ktqm77 (Ivy Bridge) and pending kontron/bsl6 (Skylake) both with text and linear framebuffers and observed FILO's prompt showing up. Change-Id: I9a3c35c60b9edf8775f3a489df7577092910e127 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/25453 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-13Revert "mb/google/coral: add usb2 phy setting override for some variants"Tim Chen
This reverts commit 06e3e1f055593bd2e2906f43040a703bc471cde4. This commit can only pass far-end USB eye diagram but will fail on near-end. Confirmed with Intel we should revert it. Change-Id: Ie987061e27996b0acc8345bf9aadb42d2c940808 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25629 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-13mb/scaleway/tagada: Document what the selected SMBIOS enclosure type meansJonathan Neuschäfer
This makes the Kconfig file more informative to read. Change-Id: Icdf4184c8db9cfed4863d9e9f3b714d67f44a4bd Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-04-12include/memory_info.h: Change serial number field from 5 bytes to 4Raul E Rangel
dimm_info.serial had a strange contract. The SPD spec defines a 4 byte serial number. dimm_info.serial required a 4 character ascii string with a null terminator. This change makes the serial field so it matches the SPD spec. smbios.c will then translate the byte array into hex and set it on the smbios table. There were only two callers that set the serial number: * haswell/raminit.c: already does a memcpy(serial, spd->serial, 4), so it already matches the new contract. * amd_late_init.c: Previously copied the last 4 characters. Requires decoding the serial number into a byte array. google/cyan/spd/spd.c: This could be updated to pass the serial number, but it uses a hard coded spd.bin. Testing this on grunt, dmidecode now shows the full serial number: Serial Number: 00000000 BUG=b:65403853 TEST=tested on grunt Change-Id: Ifc58ad9ea4cdd2abe06a170a39b1f32680e7b299 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/25343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-12mb/google/octopus: Configure SMI for ESPIShaunak Saha
This patch enables EC SMI when ESPI is enabled. BUG=b:77857802 TEST= SMI is working in depthcharge. Change-Id: I52726194b8346488e5ad781e78e33c5d286d132f Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/25569 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-11soc/amd: Fix generating SMBIOS Type 17Raul E Rangel
The converter was setting SMBIOS values when dimm_info expects SPD values. dmidecode now shows the following: Memory Device Array Handle: 0x0000 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 8192 MB Form Factor: SODIMM Set: None Locator: Channel-0-DIMM-0 Bank Locator: BANK 0 Type: DDR4 Type Detail: Synchronous Speed: 933 MT/s Manufacturer: Hynix/Hyundai Serial Number: 00000000 Asset Tag: Not Specified Part Number: HMAA51S6AMR6N-UH Rank: 1 Configured Clock Speed: 933 MT/s Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown Example debug output: AGESA TYPE 17 DMI INFO: Handle: 1 TotalWidth: 64 DataWidth: 64 MemorySize: 8192 DeviceSet: 0 Speed: 1200 ManufacturerIdCode: 44416 Attributes: 1 ExtSize: 0 ConfigSpeed: 933 MemoryType: 0x1a FormFactor: 0xd DeviceLocator: DIMM 0 BankLocator: CHANNEL A SerialNumber(8): ' 00000000' PartNumber(20): 'HMAA51S6AMR6N-UH ' CBMEM_ID_MEMINFO: dimm_size: 8192 ddr_type: 0x1a ddr_frequency: 933 rank_per_dimm: 1 channel_num: 0 dimm_num: 0 bank_locator: 0 mod_id: 44416 mod_type: 0x4 bus_width: 3 serial: 0x00000000 module_part_number(18): 'HMAA51S6AMR6N-UH ' The serial number we get from AGESA (at least on my board) is always 00000000. I'm assuming this is because the SPD info is compiled in. `mosys memory spd print all` is still failing though. I will look into that next. BUG=b:65403853 BRANCH=dimm-info TEST=Test output above Change-Id: I076bc3f965f81a9374c8976da48c7fdce014dc0c Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/25304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-11lib/memrange: Introduce method to clone memrangePatrick Rudolph
Add a new method to clone an existing memrange with all of its entries. Required for new bootmem type LB_MEM_RAM_DONT_OVERLAP. Change-Id: I64b27bf2611ca310385ef680f030a3e4aa0c2680 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25582 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-11mb/google/octopus: enable MRC recovery cacheAaron Durbin
Enable the recovery cache to speed up recovery flows. Also enable clearing of the normal mrc cache on recovery forced retrains. BUG=b:77871444 TEST=went into recovery twice. 2nd time it boots faster. Change-Id: Idfce42ac835637fa521545fadfedecd65df91d4c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-11mb/google/octopus: Select DRIVERS_SPI_ACPIFurquan Shaikh
This change selects DRIVERS_SPI_ACPI which is required to add SSDT node for SPI TPM. BUG=b:75306520 BRANCH=None TEST=None Change-Id: I0728062dae017522ba91a4b5cb16acf9f6bf4f28 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25611 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-11src/lib/dimm_info_util.c: Add methods to convert from SMBIOS to SPDRaul E Rangel
AMD AGESA returns DIMM info in SMBIOS format. dimm_info expects the data in SPD format. These methods will be used to update amd_late_init.c so it sets the correct values. BUG=b:65403853 TEST=Built and booted grunt. Methods are not called in this commit. So they were tested with the later commit by verifying the output of dmidecode. Change-Id: Id9fa98e9aad83dfd0a86f45e18b3c312665dce9b Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/25412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-11src/amd/stoneyridge: Fix a typo (EDGEL_TRIG -> EDGE_TRIG)Jonathan Neuschäfer
Fixes: 2269a3c328 ("soc/amd/stoneyridge: Add functions for GPIO interrupts") Change-Id: I5730259bc6819defc482d31644e1f476679257b2 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25588 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Chris Ching <chingcodes@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-11mainboard/intel/cannonlake_rvp: include correct SND related DT entriesSathyanarayana Nujella
For cannonlake_rvp, want to support two sound configurations based on relevant daughter board connected (either of these configurations: SND_MAX98373_NHLT and SND_MAX98357_DA7219_NHLT). By default SSDT included all codec entries. This patch corrects and includes relevant codec entries in SSDT BUG=None BRANCH=master TEST=Verify 'emerge-cnlrvp coreboot' compiles successfully. Change-Id: I4f9487f3a81ef2d24315f75ec1d34bfab8560224 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/24918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-11siemens/mc_apl1: Make DRAM configuration more flexibleMario Scheithauer
By storing the FSP-M DRAM configuration parameter in the hwinfo block, one becomes more flexible in case of a change of the DRAM type. The configuration data from hwinfo block is a one-to-one representation of the FSPM_UPD data starting with parameter 'Package' (offset 0x4d) and ending before parameter 'Ch0_Bit_swizzling' (offset 0x88). Change-Id: I58c1df0954a436710ecb59487ece07a0832b0de6 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/25586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-04-11amd/stoneyridge: Reorder temp mtrr for flashMarshall Dawson
Relocate setting the temp range MTRR, for the SPI flash device, to after completion of mp_init. The mp_init functionality mirrors the BSP's exact MTRR settings into the AP cores. The ranges need to be the correct calculated values and not some temporary setting. This solves an MTRR sync issue on APUs with more than two cores, i.e. more than a single compute-unit. MTRRs within a CU are shared so the AP always stays in sync. BUG=b:77457944 TEST=run on Kahlee Change-Id: Idc4cccdf721e252bc87d6cba62a3406a9f19b940 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/25575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-11soc/intel/common/block/cpu: Fix cpu_get_power_maxMario Scheithauer
To avoid rounding errors with the current data types, the formula in this function must be converted. Change-Id: I75d05165fd9e5a0992330df00f8665a05d2daeb3 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/25584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-11mainboard/google/kahlee: Enable Keyboard backlight for GruntMartin Roth
Grunt supports a keyboard backlight, so enable the ASL code. BUG=b:77455525 Test=Boot Grunt, verify that the string 'KBLT' is in the DSDT. Change-Id: Idf0f23581bcba0b035c126c68fb167274d7c698a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/25470 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-11Revert "model_206ax: Use parallel MP init"Arthur Heymans
This reverts commit 5fbe788bae15f0d24d56011e8eb8b48c107b7b05. This commit was submitted without its parent being submitted, resulting in coreboot not building. Change-Id: I87497093ccf6909b88e3a40d5f472afeb7f2c552 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/25616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-04-11model_206ax: Use parallel MP initArthur Heymans
This patch adds a few southbridge calls needed for parallel MP init. Moves the smm_relocate() function to smm/gen1/smi.h, since that is where this function is defined now. Tested on Thinkpad X220, shaves of ~30ms on a 2 core, 4 threads CPU. Change-Id: Iacd7bfedfccbc09057e1b7ca3bd03d44a888871d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23432 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-11soc/intel/common/block/gspi: Set Clock Update Bit for clock updates.Shamile Khan
This is required for clock parameter settings to take effect. BUG=b:75306520 BRANCH=None TEST=On Octopus, used a scope to check that spi_clk fed to tpm is 1 MHz Change-Id: Icdb617aa4aa944d46b3a56dab88d2008b01dea0d Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/25573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-11Correct "MTTR" to "MTRR"Jonathan Neuschäfer
The term MTRR has been misspelled in a few places. Change-Id: I3e3c11f80de331fa45ae89779f2b8a74a0097c74 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-11cpu/x86/mtrr: Fix broken output ("indexis")Jonathan Neuschäfer
The missing space resulted in the following broken output: > ERROR: Not enough MTRRs available! MTRR indexis 10 with 10 MTTRs in total. Put the string on one line to make it obvious where the spaces should be and to help users of grep. Change-Id: Ib9e8109d88c1bf38e7dda3dbf1c8d47fb0d23265 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25567 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-11arch/riscv: Remove I/O space access functions (outb, etc.)Jonathan Neuschäfer
RISC-V does not have the kind of I/O space that x86 has. Other architectures tend to leave out these definitions as well. Change-Id: I7328dae1f1fa4ef8772750244a0b11a3fa5aa88f Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-04-11drivers/aspeed/Kconfig: Select HAVE_VGA_TEXT_FRAMEBUFFERDaniel Gröber
This allows VGA output in SeaBIOS to be enabled using the SEABIOS_VGA_COREBOOT Kconfig option. Currently, it’s impossible to select the VGA text frame buffer in the Kconfig menu. I'm not sure why this wasn't enabled in the first place, but SeaVGABIOS seems to work just fine with this patch. Tested on KCMA-D8. Change-Id: Ic924a12fbe89940b5f26d211eb8de6cab0be767a Signed-off-by: Daniel Gröber <dxld@darkboxed.org> Reviewed-on: https://review.coreboot.org/25554 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-11mb/intel/dg43gt/devicetree.cb: Use tabs over spacesElyes HAOUAS
Change-Id: I5d18dfea0b0a33995de805219bda3a73892e5fde Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-04-11soc/intel: Remove superfluous pointers variablesArthur Heymans
Change-Id: I639be58df358129c1f420cf8d1540edd408859a7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/25572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-11soc/intel/common: Configure all possible GFX DSM memory reserve rangeSubrata Banik
Intel internal graphics preallocated memory size should be selected from below lists as per Intel FSP UPD header: 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0x05:160MB, 0xF0:4MB, 0xF1:8MB, 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB, 0xFA:44MB, 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB This patch ensures that coreboot can report the same preallocated memory range for intel grapics during memory layout calculation. Note: Today all existing SoCs(except Cannonlake) are supported under intel common code block design may not need to use any other values than 0x0-0x05 for GFX DSM range. DSM memory ranges between 0xF0-0xF6 are majorly for early SoC samples and validation requirement. This code block to justify all differnet possible ranges that FSP may support for a platform. TEST=Set IgdDvmt50PreAlloc UPD with different ranges between 4MB-60MB and coreboot could able to calculate GFX DSM range accordingly. Change-Id: I99735e9a2ee57626bd9d7258e700f7f39ef02e58 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/25562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-11drivers/intel/wifi: Add support for Harrison Peak (HrP)Subrata Banik
Move all Intel WIFI PCI ids into device/pci_ids.h file. TEST=HrP module is getting detected during PCI enumeration. Change-Id: Ia2d15f3f4a68887521ddbb1b99daf9d98cfa5c8b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/25561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-10mb/google/octopus: Capitalize MB part nameJustin TerAvest
This is for consistency with other platforms. BUG=b:77494826 BRANCH=None TEST=Sucessfully rebooted, saw updated name in SMBIOS Change-Id: I83d9075931d51b3aef8076e4567a85a808ee5047 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/25591 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-10soc/intel/apollolake: fix SPI input clock speedAaron Durbin
On APL and GLK the i2c blocks use 133MHz input clock, but the SPI blocks use a 100MHz input clock. Fix this so that the proper target frequencies can be hit on the SPI controllers. BUG=b:75306520 Change-Id: Iec36579894fa4633ac8d1035e6e7afec01af755f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-10soc/intel/cannonlake: Set Cannonlake I2C clockLijian Zhao
Correct Cannonlake I2C clock frequency to 133Mhz that will match the silicon, Cannonlake have I2C clock force to 133Mhz. BUG=b:75306520 Change-Id: Iaab8851bb00cf27876d4068167a283ed79a28b2d Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/25610 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-10soc/intel/common: prepare for lpss clock splitAaron Durbin
Apparently Intel had decided to use different clock speeds for some of its IP blocks in some of its designs. The i2c designware driver has already been moved into common code allowing for its own Kconfig value. That currently leaves SPI (UART isn't using the clock currently). Therefore, remove SOC_INTEL_COMMON_LPSS_CLOCK_MHZ and add SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ to allow for the different clock speeds present in the system for the various IP blocks. BUG=b:75306520 Change-Id: I6cb8c2de0ff446b6006bc37645fca64f2b70bf17 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25608 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-10soc/amd/stoneyridege: Create AP jump structureRichard Spiegel
As part of moving AGESA calls from bootblock to romstage, create infrastructure to pass a pointer to the AP cores, so they can jump directly to romstage. BUG=b:74236170 TEST=Build and boot grunt, actual test will be performed at a later patch. Change-Id: If716d1c1970746f2ad90ef71ae9062c99f219897 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-10soc/amd: Add "halt this AP" callback to romstageRichard Spiegel
As part of moving AGESA calls from bootblock to romstage, callback function AGESA_HALT_THIS_AP must be available at romstage. BUG=b:74236170 TEST=Build and boot grunt, actual test will be performed at a later patch. Change-Id: I0992b2de5856881c19191ec4f637168727686524 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25527 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-10mainboard: Make OemCustomize.c available at romstageRichard Spiegel
As part of moving AGESA calls from bootblock to romstage, OemCustomize.c of all boards using stoneyridge must be available at romstage. BUG=b:74236170 TEST=Build grunt and kahlee, actual test will be performed at a later patch. Change-Id: Ide9efdbff6a07c670034391c0d62e8b74fa5c02b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25528 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-10mb/google/poppy/atlas: Fix SPD index in commentJonathan Neuschäfer
Fixes: ba49c09b2f ("mb/google/poppy: Add variant for Atlas") Change-Id: I9c5c10abf8129ff61b97312a70ed4749606a3090 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25556 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-10cpu/amd/microcode/microcode.c: Remove unneeded whitespaceElyes HAOUAS
Change-Id: Ib6f73dc0b0d11f6b66b7dbdd33cd6785359191ab Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-04-10mb/google/poppy: Disable rear camera for all vayne skuAmanda Huang
Since there are two cameras on Nami and only one camera on Vayne. We need to disable rear camera on all Vayne sku. BUG=b:75073617 BRANCH=master TEST=Verify if only front camera shown on Vayne Change-Id: I6e7c1e8791462f00ad8336372954ee0a9465d9b8 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-10cpu/intel/sandybridge: Put stage cache into TSEGArthur Heymans
TSEG is not accessible in ring 0 after it is locked in ramstage, in contrast with cbmem which remains accessible. Assuming SMM does not touch the cache this is a good region to cache stages. The code is mostly copied from src/cpu/intel/haswell. TESTED on Thinkpad X220: on a cold boot the stage cache gets created and on S3 the cached ramstage gets properly used. Change-Id: Ifd8f939416b1712f6e5c74f544a5828745f8c2f2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-09cpu/x86/mtrr: Use single code path with/without holesNico Huber
Now that calc_var_mtrrs_with_hole() always chooses the optimal allocation, there is no need for calc_var_mtrrs_without_hole() any more. Drop it and all the logic to decide which one to call. Tests performed compared to "upstream" (before "cpu/x86/mtrr: Optimize hole carving strategy") on a Lenovo/X200s with 48MiB GFX stolen memory. 2GiB total RAM: 3 MTRRs saved MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x000000007ac00000 size 0x7ab40000 type 6 0x000000007ac00000 - 0x00000000d0000000 size 0x55400000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 upstream: MTRR: Removing WRCOMB type. WB/UC MTRR counts: 7/8 > 6. MTRR: default type WB/UC MTRR counts: 4/7. MTRR: WB selected as default type. MTRR: 0 base 0x000000007ac00000 mask 0x0000000fffc00000 type 0 MTRR: 1 base 0x000000007b000000 mask 0x0000000fff000000 type 0 MTRR: 2 base 0x000000007c000000 mask 0x0000000ffc000000 type 0 MTRR: 3 base 0x0000000080000000 mask 0x0000000f80000000 type 0 patched: MTRR: default type WB/UC MTRR counts: 7/5. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6 MTRR: 1 base 0x000000007ac00000 mask 0x0000000fffc00000 type 0 MTRR: 2 base 0x000000007b000000 mask 0x0000000fff000000 type 0 MTRR: 3 base 0x000000007c000000 mask 0x0000000ffc000000 type 0 MTRR: 4 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1 4GiB total RAM: no MTRRs saved but slightly more accurate alignment MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x000000007cc00000 size 0x7cb40000 type 6 0x000000007cc00000 - 0x00000000d0000000 size 0x53400000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 0x0000000100000000 - 0x000000017c000000 size 0x7c000000 type 6 upstream: MTRR: default type WB/UC MTRR counts: 7/6. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6 MTRR: 1 base 0x000000007cc00000 mask 0x0000000fffc00000 type 0 MTRR: 2 base 0x000000007d000000 mask 0x0000000fff000000 type 0 MTRR: 3 base 0x000000007e000000 mask 0x0000000ffe000000 type 0 MTRR: 4 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1 MTRR: 5 base 0x0000000100000000 mask 0x0000000f00000000 type 6 patched: MTRR: default type WB/UC MTRR counts: 7/6. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6 MTRR: 1 base 0x000000007cc00000 mask 0x0000000fffc00000 type 0 MTRR: 2 base 0x000000007d000000 mask 0x0000000fff000000 type 0 MTRR: 3 base 0x000000007e000000 mask 0x0000000ffe000000 type 0 MTRR: 4 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1 MTRR: 5 base 0x0000000100000000 mask 0x0000000f80000000 type 6 8GiB total RAM: possible savings but WB still beats UC MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x000000007cc00000 size 0x7cb40000 type 6 0x000000007cc00000 - 0x00000000d0000000 size 0x53400000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 0x0000000100000000 - 0x000000027c000000 size 0x17c000000 type 6 upstream: MTRR: Removing WRCOMB type. WB/UC MTRR counts: 7/11 > 6. MTRR: default type WB/UC MTRR counts: 4/10. MTRR: WB selected as default type. MTRR: 0 base 0x000000007cc00000 mask 0x0000000fffc00000 type 0 MTRR: 1 base 0x000000007d000000 mask 0x0000000fff000000 type 0 MTRR: 2 base 0x000000007e000000 mask 0x0000000ffe000000 type 0 MTRR: 3 base 0x0000000080000000 mask 0x0000000f80000000 type 0 patched: MTRR: Removing WRCOMB type. WB/UC MTRR counts: 7/7 > 6. MTRR: default type WB/UC MTRR counts: 4/6. MTRR: WB selected as default type. MTRR: 0 base 0x000000007cc00000 mask 0x0000000fffc00000 type 0 MTRR: 1 base 0x000000007d000000 mask 0x0000000fff000000 type 0 MTRR: 2 base 0x000000007e000000 mask 0x0000000ffe000000 type 0 MTRR: 3 base 0x0000000080000000 mask 0x0000000f80000000 type 0 Change-Id: Iedf7dfad61d6baac91973062e2688ad866f05afd Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/21916 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-09cpu/x86/mtrr: Optimize hole carving strategyNico Huber
For WB ranges with unaligned end, we try to align the range up and carve a hole out of it which might reduce MTRR usage. Instead of trying an arbitrary alignment, we try all and choose an optimal one. Also, restructure the cases when we try to find a hole. Which leads us to the following three: 1. WB range is last in address space: Aligning up, up to the next power of 2, may gain us something. 2. The next range is of type UC: We may align up, up to the _end_ of the next range. If there is a gap between the current and the next range, it would have been covered by the default type UC anyway. 3. The next range is not of type UC: We may align up, up to the _base_ of the next range. This is the end of the gap, if there is one. Change-Id: Iefb064ce8c4f293490a19dd46054b966c63bde44 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/21915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-09mb/google/octopus: Enable EC wakeShaunak Saha
This patch sets the wake for EC to proper gpios. BUG=77605178 TEST=Test that lidopen wakes up the system from S3. Change-Id: Icbf30007403191005396027e74b9b6fb7319e006 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/25539 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-09soc/intel/apollolake: Fix GPIO group to GPE mapping for GLKHannah Williams
BUG=b:77605178 TEST=Tested EC wake sources Change-Id: Id879b3e91d4c0794662cf3d8204bd077117db23c Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/25553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-04-09soc/intel/apollolake: enable MONITOR/MWAIT for GLKCole Nelson
MONITOR/MWAIT had an irremediable hardware bug for Apollolake. This has been fixed for GLK. Therefore, make MONITOR/MWAIT based C-states the default for GLK and disable IO-Redirection based C-states used for Apollolake. Tested on GLK w/kernel 4.14.27 using turbostat to observe C-state residencies with and without load. Tested for S0ix entry and exit using: "echo freeze > /sys/power/state" and "suspend_stress_test -c 500". BUG=b:77639897 Change-Id: If648c25a9b26c04b278dce4af241d439790288ca Signed-off-by: Cole Nelson <colex.nelson@intel.com> Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/19718 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-09soc/intel/common: Add funtion to modify PAT & NXE bitNaresh G Solanki
Add function to modify NXE bit & PAT. BUG=None BRANCH=None TEST=Make sure build for Glkrvp is successful. Change-Id: I265d6d5ca538496934a375eb8d99d52879522051 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/25480 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-09mb/google/octopus/variants/baseboard: Add DPTF parametersSumeet Pawnikar
This patch adds the DPTF parameters for Octopus baseboard. These parameters are copied from reef/coral as initial reference values. BUG=None BRANCH=None TEST=Build coreboot for Octopus board. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Change-Id: I069bae8c9ef43ebd1ee20945ef34a7f51991f621 Reviewed-on: https://review.coreboot.org/25339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-09ACPI S3: Drop too early resume backupKyösti Mälkki
No longer needed as low memory backup is implemented as part of the ramstage loader, when the actual requirement of the ramstage to load is known. Change-Id: I5f5ad94bae2afef915927b9737c79431b6f75f22 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15477 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 23:57:32 +0000