summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2018-12-04soc/intel/common: Limit BIOS region cache to 16MBLijian Zhao
Cache BIOS region can boost boot performance, however it can't be over 16MB, according to processor EDS vol1(Apollolake/Skylake/WhiskeyLake), FLASH+APIC LT will be less than 20MB under 4G. Set the maxiam to 16GB to save numbers of mtrr entries. BUG=b:119267832 TEST=Build and boot up fine on whiskeylake rvp platform. Change-Id: I46a47c8bf66b14fb2fcb7b6b1d30d02886c450a4 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/29944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04mb/google/poppy/variant/nocturne: adjust RcompTarget to fix DRAM corruptionNick Vaccaro
BUG=b:111812662 TEST=flash to nocturne, boot nocturne, run "memtester 1g" and verify it passes. Change-Id: Iefc3957f915a39a47ad6018459e65b70d1b34091 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/29361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-04mb/google/sarien: Define USB devices for ACPIDuncan Laurie
Add the USB device information for the sarien/arcada variants. This includes the ACPI _PLD group definitions for the external ports that indicate which USB2 and USB3 ports share the same physical interface. Change-Id: I0b936127954ba09c61ccb871bfc62ee7d99da263 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04mb/google/eve: Define USB port peersDuncan Laurie
Add ACPI _PLD group definitions for the external ports that indicate which USB2 and USB3 ports share the same physical interface. Change-Id: I7f85720a878a3774d453a9adb82518722f7ba23d Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04acpi_pld: Make it easier to define the ACPI USB device groupsDuncan Laurie
The Linux kernel can use the ACPI _PLD group information to determine peer ports. Currently to define the group information the devicetree must provide a complete _PLD structure. This change pulls the group information into a separate structure that can be defined in devicetree. This makes it easier to set for USB devices in devicetree that do not need a full custom PLD. This was tested on a sarien board with the USB devices defined by verifying that the USB 2/3 ports are correctly identified with their peer in sysfs. Change-Id: Ifd4cadf0f6c901eb3832ad4e1395904f99c2f5a0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04soc/intel/cannonlake: Add USB device namesDuncan Laurie
Add the ACPI device names for the USB ports to match what is in the DSDT so USB ports can be defined in the SSDT. Change-Id: Ibb323bbd324811fa3178b0cba3d7f0a315169486 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04soc/intel/cannonlake: Increase bootblock sizeDuncan Laurie
Increase the bootblock size to 48K to match skylake. With UART enabled we are very near the 32K limit, and with upcoming changes to add USB devices in devicetree for a cannonlake board it is over the current 32K limit. Change-Id: I155cb0a6af1746af6833fa9f35c2ea6fe0bc709f Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04ec/google/wilco: Turn camera power onDuncan Laurie
Send the EC command required to turn the camera power on and verify that it shows up on the USB bus. Change-Id: I9e9ba712a11cef85cde91ac21a4b6b5090ef58dc Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04mb/google/sarien: Enable DPTFDuncan Laurie
Enable DPTF support for sarien/arcada boards. This is currently using placeholder values that are identical that will be updated after thermal tuning is done. Change-Id: I7d51c3b38068fc25927c8dafc0bd9069b29d77f5 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29762 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04ec/google/wilco: Guard DTPF with ifdefDuncan Laurie
There is a dependency issue with the EC DPTF code accessing methods that are external, but once the mainboard includes the relevant code they become internal and the current version of IASL used by jenkins will fail to compile it. Until the new IASL is deployed everywhere wrap the EC DPTF code and expect that the mainboard will explicitly enable it. Change-Id: I612ad8f86d424060ca0303d267d7c2915c760173 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04ec/google/wilco/acpi: Add DPTF supportDuncan Laurie
Add the support needed for DPTF. This includes the methods to write trip point values, read temperatures, and handle events. This was tested on a sarien board by inspecting AML debug output with the kernel while monitoring temperatures and trip points in sysfs and controlling temperatures with a fan to ensure that when a trip point is crossed an SCI is generated and the event is handled properly. Change-Id: I8d8570d176c0896fa709a6c782b319f58d3c1e52 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29761 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco/acpi: Fix issues and clean upDuncan Laurie
- Disable debug output from read/write methods by default - Use argument to _REG to disable SCI when EC is unregistered - Change read/write macros to sync level 2 so they can be called when a mutex is already held - Define some missing events Change-Id: Ic65ebbb6a6151444c47b4aeff7429e186856c49a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29760 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04soc/intel/cannonlake: Add DPTF ACPI codeDuncan Laurie
Define the constants that DPTF expects from the SOC in order to use the common DPTF ACPI code. For cannonlake this indicates the CPU device is called B0D4 and is at PCI address 00:04.0. Change-Id: I43c2f8dd7281d3e9f791ab01478ee7823fd6b128 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29759 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04soc/intel/common/dptf: Add method for temp conversionDuncan Laurie
Add a method to convert from 1/10 Kelvin to Celsius. This is useful for EC devices where the sensor temperature are stored in Celsius instead of Kelvin. Change-Id: I6b1154f5ba13416131a029966d6d5c1598904881 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29758 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04soc/intel/common/dptf: Make CPU address a defineDuncan Laurie
In order to support using the common ACPI code on more platforms than just Apollo Lake the DPTF code needs to be told what the PCI address is for the CPU thermal device. Change-Id: I638f2387330bbc42f64eb0fb676ee32c5df6572e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29757 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco: Fix extended event handlingDuncan Laurie
Extended events will be handled by the OS kernel driver, but that driver needs a method exposed by ACPI to read the event data from the EC and into a buffer. Tested by generating a hotkey event and reading the buffer from the Linux kernel driver with acpi_evaluate_object(). Change-Id: Ic8510e38d777a5dd31a5237867313efefeb2b48e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29674 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco: Enable WiFi radioDuncan Laurie
Add EC command to enable WiFi radio and send that command at startup. Tested to ensure WiFi is functional on a sarien board. Change-Id: Iac46895c7118567e1eb55ea33051a1662103b563 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29673 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco: Enable COM1 ACPI deviceDuncan Laurie
Enable the COM1 ACPI device based on the existing Kconfig option CONFIG_DRIVERS_UART_8250IO instead of expecting the mainboard to also define another value for ACPI. Change-Id: I69361cc2c245cfcad3e4f57567bf56d5a26f0b06 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29672 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04mb/google/sarien: Enable WWAN detectionAmanda Huang
Set WWAN_GPIO_PERST#(GPP_D22) to low at bootblock stage to meet the logic output for WWAN_PERST#_R to high. BUG=120004153 TEST=Boot up Sarien board, check WWAN get detected as USB devices through lsusb. Change-Id: I16f1101c64dfd4dcb5e8342fdb925951f6f2f90b Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-04soc/sifive/fu540: Load PLL settings from a structJonathan Neuschäfer
The different PLLs in the fu540 use the same register layout, so use one function (configure_pll) to program a PLL and wait for it to lock. This also makes it possible to dynamically calculate the PLL settings later. TEST=Boot until "Payload not loaded" on HiFive Unleashed Change-Id: I5c0cee886bad5758c70f967d2bb998c1e1a736ab Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/29356 Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04drivers/intel/fsp1_1/romstage.c: Fix typoFrans Hendriks
Correct typo of 'Initialize' BUG=N/A TEST=N/A Change-Id: I94cfd9c41bb5f9751ef4a18beaeba05108220bc8 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/30016 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04mb/opencellular/elgon: Enable write protectionPatrick Rudolph
* Verify the flash write protection on each boot * Program non-volatile write protection on first boot Tested using I715791b8ae5d1db1ef587321ae5c9daa10eb7dbc. The bootblock is write-protected as long as the #WP pin is asserted low: * Reprogramming of the status register fails. * Trying to write to WP_RO region fails. Programming the WP_RO is only possible if #WP pin is high. Change-Id: I6a940c69ecb1dfd9704b2101c263570bebc5540e Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/29532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-12-04drivers/spi/winbond: Fix TB bitPatrick Rudolph
The TB has to be inverted to actually protected the correct region. Tested on elgon using I67eb4ee8e0ad297a8d1984d55102146688c291fc. Change-Id: I715791b8ae5d1db1ef587321ae5c9daa10eb7dbc Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-12-04mb/google/poppy/variants/nami: update bard/ekko sku idsRen Kuo
update the new sku ids of bard/ekko BUG=b:120257865 BRANCH=Nami TEST=emerge-nami coreboot chromeos-bootimage write the new sku id in cbi and verify the fw to check it can get the correct settings by the sku id Change-Id: I3579d3d8042a270d8ea8e2f7b5612ff8e2cdfa7b Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30031 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03mb/google/octopus: Enable mode change as wake source from S3/S0ixFurquan Shaikh
This change enables mode change as a wake source from S3 and S0ix. Thus, any time the device switches between clamshell and tablet mode while it is suspended, it will be treated as a valid user event and hence wake source. BUG=b:120349473 BRANCH=octopus TEST=Verified that octopus wakes up on mode transitions. Change-Id: Ib224df434730f873ce5514303e5d043cbc85a9a4 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/30001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2018-12-03soc/intel/apl: Enable graphics with libgfxinitNico Huber
Backlight control of internal panels likely won't work as configuration for that seems absent in coreboot. Also, libgfxinit doesn't support any MIPI/DSI connections, yet, and neither Gemini Lake. TEST=Booted work-in-progress port kontron/mal10 with VGA text and linear framebuffer modes. DP display came up. Change-Id: I7b111f1cdac4d18f2fc3089f57aebf3ad1739e5d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29903 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03cpu/intel/fsp_model_406dx: Drop dead microcode referenceNico Huber
The referenced Kconfig symbols don't exist (anymore?). Change-Id: Ia724262a526fe960c17ae4b248acfa42fc342331 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Guckian Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-03sb/intel/i82801jx: Fix the x_pm2_cnt_blk addrlArthur Heymans
Removes a warning in Linux about FACP. Change-Id: Ia12302a4dcd34eacdcc8ae16bd39e951e616c6ea Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-03soc/intel/apollolake: Add support to print ME versionFurquan Shaikh
This change adds support to print ME version if UART_DEBUG is enabled. Check for UART_DEBUG is necessary because talking to ME to get the firmware version adds ~0.6 seconds to boot time. TEST=Verified on octopus that ME version printed is correct. Change-Id: I41217371558da1af694a2705e005429155d62838 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/29989 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03smmstore: update smm store filename to use an underscoreJoel Kitching
Rename "smm store" to "smm_store". BUG=b:120060878 TEST=None Signed-off-by: Joel Kitching <kitching@google.com> Change-Id: If70772e17cc1668a28b376eeccfde0424e637b1a Reviewed-on: https://review.coreboot.org/c/29854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-03soc/amd/stoneyridge: Use new ACPI MMIO functionsRichard Spiegel
Replace IO access to ACPI registers with the new MMIO access functions. BUG=b:118049037 TEST=Build and boot grunt. Test ACPI related functionality. Change-Id: I7544169bb21982fcf7b1c07ab7c19c6f5e65ad56 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/29296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-12-03soc/amd/stoneyridge: Create MMIO offsets for ACPIRichard Spiegel
ACPI registers can be accessed through IO or through MMIO. However, the offset relationship is not one to one. Therefore, definitions with the correct offset for MMIO access are needed. BUG=b:118049037 TEST=Use Chrome OS IOTOOLS io_readxx and mem_readxx to find the correct relationship between ACPI IO and ACPI MMIO. Change-Id: Id20754c0fc0af35bc9eb1a4b40c62fbf9ed6304d Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/29294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-12-03mb/asus/am1i-a: add missing GPIO IO portsKevin Cody-Little
This makes the mainboard able to boot again. Change-Id: Id96fbfd5c815431dba2f030fca62a5ea16b97393 Signed-off-by: Kevin Cody-Little <kcodyjr@gmail.com> Reviewed-on: https://review.coreboot.org/c/29994 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03mb/sifive/hifive-unleashed: Use if (IS_ENABLED(...))Jonathan Neuschäfer
"if" is preferable over "#if", because it lets the compiler perform syntax and type checks even if CONFIG_CONSOLE_SERIAL is disabled. Change-Id: I45a763f2d854fbe9082795bc74de7a9d0fded3c9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/29336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-03soc/sifive/fu540: Simplify UART refclk calculationJonathan Neuschäfer
clock_get_coreclk_khz() already detects whether the PLL or the input clock (hfclk) is used. Tested on HiFive Unleashed. Change-Id: I264977b0de0b81ef74a014984b6d33638ab33f4b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/29334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-03sb/intel/lynxpoint: Move `HAVE_SMI_HANDLER` to southbridge KconfigTristan Corrick
All Lynx Point board select this, and none build without it. Change-Id: I4b59b10ee985cff5a8e1442677d36b0be88cf437 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/29992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-03sb/intel/common: Create a common PCH finalise implementationTristan Corrick
The common finalise code is used by bd82x6x, Lynx Point, and Ibex Peak. Lynx Point now benefits from being able to write-protect the flash chip. For Lynx Point, writing the SPI OPMENU now happens in ramstage, as done in bd82x6x. Tested on an ASRock H81M-HDS (Lynx Point). When write-protection is configured, flashrom reports all flash regions as read-only, and does not manage to alter the contents of the flash chip. Also tested on an ASUS P8H61-M LX (Cougar Point). Everything seems to work as before. Change-Id: I781082b1ed507b00815d1e85aec3e56ae5a4bef2 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/29977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-03sb/intel/lynxpoint: Ensure the finalise handler is calledTristan Corrick
The finalise handler is not called during S3 resume when using the `BS_PAYLOAD_BOOT` approach. So, adopt the `lpc_final` approach used by bd82x6x and others. Tested on an ASRock H81M-HDS. The finalise handler is now called on the normal boot path, and during S3 resume. Change-Id: I9766a8dcbcb38420e937c810d252fef071851e92 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/29976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-03sb/intel/lynxpoint: Make the finalise handler commonTristan Corrick
The ASRock H81M-HDS doesn't implement a finalise handler. To fix this, and reduce code duplication in the process, make a common implementation. There should be no functional change to boards with existing finalise handlers, since the code is identical among them and the new, common implementation. Tested on an ASRock H81M-HDS. The finalise handler works. Change-Id: I13b581a2219288019a4e0c9e618db3ac7c3c15ab Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/29975 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-03mb/google/poppy/variant/nocturne: increase touch panel power-on delayNick Vaccaro
The WACOM 5C01 touch panel power-up delay of 10mS is too aggressive and causes "failed to change power setting" errors in the kernel, so this change increases the power-up delay to 20mS which allows enough time for the WACOM device's i2c controller to wake up. BUG=b:120090384 BRANCH=none TEST=flash and boot nocturne, log into kernel, execute the following command and make sure the string is not found : dmesg | grep "failed to change power setting" Change-Id: I1db0b3f5ce666b79d8ada2939ec865233ce52a56 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/29988 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03mb/poppy/variant/nami: Move FPMCU_INT_L gpios to B groupShelley Chen
We discovered that the gpios previously used for FPMCU_INT_L were in two different groups with two different voltages (C group was at 3.3V and D group was at 1.8V). Moving both to B group which is at 3.3V. BUG=b:119447525 BRANCH=Nami TEST=unlock OS with fingerprint register fingerprint run powerd_dbus_suspend and see if it goes int s0ix Change-Id: I2332b0eb7a2f74e8178b95a23c8ac2091027a071 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/29872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-03mb/google/fizz/variants/karma: Update USB port infoDavid Wu
Update USB port info according to the schematic file. BUG=none BRANCH=master TEST=Compiles successfully and boot on DUT. Change-Id: I7383b3d676fd7c775a6d749c70af65b28cf941eb Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-03mb/google/fizz/variants/karma: Disable native SD card controllerDavid Wu
This change selects Kconfig option to disable native SD card controller in ACPI tables. BUG=b:119798840 BRANCH=master TEST=Compiles successfully and boot on DUT. Change-Id: I68dc9be511a370d882e4656c165efbe5dc6ee52e Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-03soc/intel/cannonlake: Load FSP teardown optionallyLijian Zhao
Make build still pass in case of no FsptUpd.h available. BUG=N/A TEST=Delete FsptUpd.h and build pass wihtout FSP_CAR set. Change-Id: I3936d3deb8b079bd4db11e444f6bb7f9605520dc Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/29907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-03soc/amd/stoneyridge: Create MMIO ACPI access functionsRichard Spiegel
Now that the relationship between IO access and MMIO access has been established, create read/write functions to access ACPI standard registers through MMIO. BUG=b:118049037 TEST=Build grunt Change-Id: I32c26f342885c0d99b082be98730edcf16ab5dfc Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/29295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-12-03src/mb/pcengines/apu2/mainboard.c: Fix retrieving serial numberMichał Żygowski
Handle situation when first NIC is not BDF 1:0.0. The PCI enumeration is different when a external PCIe device is connected to mPCIe2 slot which is routed to first PCIe bridge. The first NIC is then assigned BDF 2:0.0, because it is connected to the second PCIe bridge. Read the secondary bus number from the NIC PCIe bridge before attempting to read MAC adress and calculating serial number. Change-Id: I9f89a6f3cd0c23a2d2924e587338f69c260b12f8 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/29842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-03nb/intel/gm45: Make fetching the blc_pwm freq globalArthur Heymans
This can be used to select the proper VBT. Change-Id: Id3f6ba3ae31a5ab47f44d207678c1c4a6a43b7ec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-03nb/intel/gm45: Make fetching the blc_pwm freq its own functionArthur Heymans
Also check the EDID string using strcmp instead of strncmp. Change-Id: I9ad364f84f3658be98ce7ad3a6f0f0fe3247fc41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-03sb/intel/lynxpoint/usb_{e,x}hci.c: Don't use device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: Ie75450c844e2317ded157465eb0fc6a9ec1b3ab0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29932 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03mb/google/dragonegg: Don't use device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: Ief858f6612d1c7b4b0c286cf5938f8c29055f1b5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-05 00:48:11 +0000