summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2015-12-30x86 chipsets: Link non-code flow CHIPSET_BOOTBLOCK_INCLUDE filesAlexandru Gagniuc
Non-code flow assembly stubs do not have to be included in bootblock.S, now that we have more freedom in bootblock linking. Rather than bringing these stubs to the config system, just link them in the bootblock. Note that we cannot fully remove CHIPSET_BOOTBLOCK_INCLUDE at this point, as some intel SOCs use this stub for code flow. objdump -h build/cbfs/fallback/bootblock.debug on a few random boards confirms that the appropriate sections are still included in the final binary. Change-Id: Id3f9ece14e399c1cc83090f407780c4a05a076f0 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: https://review.coreboot.org/11856 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-29x86: Align CBFS on top of ROMNico Huber
Since the introduction of the new (interim?) master header, coreboot searches the whole ROM for CBFS entries. Fix that by aligning it on top of the ROM. Change-Id: I080cd4b746169a36462a49baff5e114b1f6f224a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/12810 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-29device/pnp: Ability to set vendor specific logical device configDamien Zammit
According to the PNP ISA v1.0a spec, config registers in the range of 0xf0 up to 0xfe are vendor defined and may be used for any purpose. Config register 0xff is reserved and is defined as such. Currently, only vendor specific registers 0xf0, 0xf1, 0xf4, and 0xfa are able to be set using the PNP_MSCx bit flag masks. This patch adds support for all 15 vendor specific config registers, and updates the existing superio pnp_info to use them where appropriate. Change-Id: Id43b85f74e3192b17dbd7e54c4c6136a2e59ad55 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/12808 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-29northbridge/intel/x4x: Intel 4-series northbridge supportDamien Zammit
Boots to console on Gigabyte GA-G41M-ES2L Ram initialization *not* included in this patch VGA native init works on analog connector Change-Id: I5262f73fd03d5e5c12e9f11d027bdfbbf0ddde82 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/11305 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-29mips: add coherency argument to identity mappingIonela Voinescu
In order for a U-boot payload to work properly the soc_registers region (device registers) needs to be mapped as uncached. Therefore, add a coherency argument to the identity mapping funcion which will establish the type of mapping. Change-Id: I26fc546378acda4f4f8f4757fbc0adb03ac7db9f Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12769 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-27mainboard/google/urara: change SYS PLL to 700MHzIonela Voinescu
This requires changes the interface that sets up the system PLL to support a given reference devider value and given feedback value. Also, this requires a change in the dividers used for UART, USB, I2C setup. Change-Id: I98cf7c655dbb3e95b8fcee3c7f468122021c70b5 Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12765 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-27soc/intel/broadwell: Add back support for EHCI debug setupDuncan Laurie
The EHCI debug device setup code was removed from broadwell in commit 49ee5ef: http://review.coreboot.org/11874 However the generic device setup code is in the southbridge/common/intel directory while broadwell is in the soc directory so this is not used. Add it back to the broadwell soc to fix undefined reference compile errors with 'pci_ehci_dbg_dev' and 'pci_ehci_dbg_enable'. This was tested to compile and produce romstage and ramstage output on a google/samus board. Change-Id: Ia93825a1e21a770f6c82d0989cb97980a5c700d6 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/12794 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-12-27broadwell: Fix SATA Gen3 DTLE configuration registersDuncan Laurie
The port0 and port1 registers were swapped, which meant it did not work to apply the DTLE settings to the correct SATA port. This was tested on an unreleased mainboard but is verified with the documentation to be the correct register addresses now. Change-Id: Ifb8890a563a741129ec8ddf72e73ab021c7d33da Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/12793 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-12-27broadwell: Fix CONFIG_SPI_CONSOLE usageDuncan Laurie
Locking down the SPI controller with a specific opcode menu kills the SPI console. Skip this when the SPI console config option is enabled. This was tested using an em100 and google/samus board to ensure the console output does not stop at the finalize step. Change-Id: Ie460f583214b47544e92d4afa8ef862563a11e36 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/12792 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-12-26ACPI: Add hack to avoid IASL warning when reading back registersMartin Roth
Upcoming versions of IASL give a warning about unused methods. This adds an operation after the read to use the local variable and avoid the warning. The warning can be completely disabled on the command line, but as it can find real issues, my preference is to not do that. Fixes warnings: dsdt.aml 640: Store (CTMP, Local0) Warning 3144 - Method Local is set but never used ^ (Local0) Change-Id: If55bb8e03abb8861e1f2f08a8bcb1be8c9783afe Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12704 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-26IT8772F: Clean up it8772f includes and add a LED APIdavid
- Remove it8772f c includes - Add a new LED API, it8772f_gpio_led - Stumpy: using it8772f_gpio_led BUG=chrome-os-partner:28232 BRANCH=Guado TEST=emerge-guado coreboot chromeos-bootimage Change-Id: I08de52515d3c1e7e85d1761c09a0cebffda7dda3 Signed-off-by: David Wu <David_Wu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/241813 Tested-by: David Wu <david_wu@quantatw.com> Reviewed-by: Shawn N <shawnn@chromium.org> Commit-Queue: David Wu <david_wu@quantatw.com> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/12797 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-12-25cpu/allwinner/a10: Fix I2c speed calculationMartin Roth
Looking at the A10 datasheet, N should go in bits 2:0, but was being cleared by shifting it left by three bits, then anding it with 7. Fixes coverity warning: CID 1241888 (#1 of 1): Wrong operator used (CONSTANT_EXPRESSION_RESULT) operator_confusion: (n << 3) & (7U /* 7 << 0 */) is always 0 regardless of the values of its operands. This occurs as the bitwise second operand of '|'. Change-Id: I17e71a73adf37a62607e8e5865b1da749d7278aa Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12779 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-12-22soc/intel/fsp_baytrail: Make sure i2c bus is < 7Martin Roth
Baytrail has I2c Busses 0 to 6, so is supposed to error out if the I2c driver is called with 7 or greater. Due to an off-by-one error it could be called with bus 7. Fixes coverity warning: CID 1287074 (#1 of 1): Out-of-bounds read (OVERRUN) 3. overrun-local: Overrunning array base_adr of 7 4-byte elements at element index 7 (byte offset 28) using index bus (which evaluates to 7). Change-Id: I7caec60298cf27bd669796e0e05e4a896f92befd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12781 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2015-12-22drivers/intel/fsp1_0/fsp_util.c: Fix indentationMartin Roth
- Also update post code comment to keep under 80 characters. Change-Id: Id0fd0ee5660f2628fe33188855bebb6e3eea8d2e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12780 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2015-12-21imgtec/pistachio: DDR2, DDR3: DLL reset setIonela Voinescu
Bit 8 of the MR register is automatically set by the PHY during memory initilization but having it set in the register leads to a more clear understanding. Tested on Pistachio bring up board; DDR2 and DDR3 are initialized properly. Change-Id: Ie6953e2a96ba2961521b372d280f362ee1c52b94 Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12764 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-21imgtec/pistachio: DDR2, DDR3: DQS gate earlyIonela Voinescu
Switching on DQS Gate Early and DQS Gate Extension with 500R DQS/DSQN Resistors. This setup was recommended by Synopsys. Tested on Pistachio bring up board; DDR2 and DDR3 are initialized properly. Change-Id: I6cd3888d506effe71f5d535367525af2e51f6ba3 Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12763 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-21imgtec/pistachio: increase CBFS cacheIonela Voinescu
Increase CBFS cache size to allow for a bigger payload. Change-Id: I47404ba9bbe95f6610189b971504019c0a1a81f0 Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12762 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-20soc/intel/broadwell: Init var before use, only use when neededMartin Roth
root_port_init_config() pcie.c wasn't initializing a variable before passing its pointer to pch_iobp_exec(). pch_iobp_exec() wrote the uninitialized value into a register. In theory, the register would only be used if data was being written, and pch_iobp_exec() was being used to read the data, not write it, so this change shouldn't have any practical effect. Fixes coverity error: CID 1293134 (#1 of 1): Uninitialized scalar variable (UNINIT) Change-Id: I5d17863d904c6b1ceb30d72b94cd7a40c8fbb437 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12778 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@google.com>
2015-12-18southbridge/amd/sr5650: Add MCFG ACPI table supportTimothy Pearson
As the southbridge largely controls the PCI[e] configuration space this patch moves the resource allocation from the northbridge to the southbridge when the extended configuration space region is enabled. Change-Id: I0c4ba74ddcc727cd92b848d5d3240e6f9f392101 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12050 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-12-18mainboard/asus/kgpe-d16: Enable CBFS spinlocksTimothy Pearson
Change-Id: I8f6226d3e74ac5c7f29f708128a7502ced1287bf Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12062 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-18drivers/pc80: Add optional spinlock for nvram CBFS accessTimothy Pearson
When enabling the IOMMU on certain systems dmesg is spammed with I/O page faults like the following: AMD-Vi: Event logged [IO_PAGE_FAULT device=00:14.0 domain=0x000a address=0x000000fdf9103300 flags=0x0030] Decoding the faulting address: 0x000000fdf9103300 fdf91x Hypertransport system management region 33 SysMgtCmd (System Management Command) = 0x33 3 Base Command Type = 0x3: STPCLK (Stop Clock request) 3 SMAF (System Management Action Field) = [3:1] = 0x1 1 Signal State Bit Map = [0] = 0x1 Therefore, the error appears to be triggered by an upstream C1E request. This was eventually traced to concurrent access to the SP5100's SPI Flash controller by multiple APs during startup. Calls to the nvram read functions get_option and read_option call CBFS functions, which in turn make near-simultaneous requests to the SPI Flash controller, thus placing the SP5100 in an invalid state. This limitation is not documented in any public AMD errata, and was only discovered through considerable debugging effort. Change-Id: I4e61b1ab767b1b7958ac7c1cf20eee41d2261bef Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12061 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-18cpu/samsung/exynos5250: Move update-bl1.sh to 3rdparty/blobs/Stefan Reinauer
The binary is taken from blobs, so the script should live over there, too. Change-Id: I3cc0aabc846c352ccf5cb348132b320a37f273a6 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/12725 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2015-12-18siemens/mc_tcu3: Set GPIO_S0_SC[75] to outputWerner Zeh
The usage of the pin has changed and therefore this pin needs to be set up as output and drive low initially. Change-Id: Ie3eb9cc703f7f73d59fad52ea9e514997d84606a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/12754 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-12-17google/veyron: Add commercial board names in Kconfig.nameDenis 'GNUtoo' Carikli
The correspondence between engineering code names and commercial names can be found on chromium.org website at: https://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices This it to make the names more relevant: towiki (in util/board_status/to-wiki/towiki.sh) will pick such names, which end up in the supported board list at: http://www.coreboot.org/Supported_Motherboards Change-Id: I2d705672d7202964fea3f62a5bd61a231d3f14c0 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/12652 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-12-17Kconfig: Fix CONFIG_GDB_STUB dependenciesDenis 'GNUtoo' Carikli
If we select CONFIG_GDB_STUB without CONFIG_SERIAL: build/console/console.romstage.o: In function `__gdb_hw_init': [...]src/include/console/uart.h:74: undefined reference to `uart_init' build/console/console.romstage.o: In function `__gdb_tx_byte': [...]/src/include/console/uart.h:75: undefined reference to `uart_tx_byte' build/console/console.romstage.o: In function `__gdb_tx_flush': [...]/src/include/console/uart.h:76: undefined reference to `uart_tx_flush' build/console/console.romstage.o: In function `__gdb_rx_byte': [...]/src/include/console/uart.h:77: undefined reference to `uart_rx_byte' Note that CONFIG_GDB_STUB should also work trough usbdebug, But due to the lack of testing, it has been disabled when added. This commit gives more information on the issue: f2f7f03 console: Add console for GDB Change-Id: I9accf8189dfd2c4ae379c03649d2e5863183457b Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/12708 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-17google/veyron: Indicate which boards are laptops.Denis 'GNUtoo' Carikli
This is to make towiki pick that information, to make these boards end up in the laptop list at: http://www.coreboot.org/Supported_Motherboards Change-Id: Ibf8bf4bf6566080a34687e36675d4c4c8b89f334 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/12716 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-17Drop src/cpu/ indirection for MIPSStefan Reinauer
Change-Id: I406166e650e07851ab1b293450fa29da8af075d9 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/12724 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2015-12-17soc/imgtec/pistachio: add implementation for system resetIonela Voinescu
Implement system reset by calling the watchdog soft reset. Following the soft reset, the SoC will reset to the same logic state and therefore have the same effect as a hard (power-on) reset except for: - watchdog scratch registers will be unaffected (hard reset will clear them) - the real time clock will be unaffected BUG=none TEST=tested on Pistachio bring up board Change-Id: I1332c2249c756f6d8574fc5c407de52f88e60f08 Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12755 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2015-12-17soc/imgtec/pistachio: Implement hard_reset()Stefan Reinauer
Verified boot needs hard_reset() now, so offer a dummy implementation for the Imagination chip. Sorry, I don't have the specs for this chip anymore to make a real implementation, but I would like to keep this code from bit rotting. Change-Id: I15aa47f7d248b99901a2ac0e65a46b43d7718717 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/12723 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2015-12-17vendorcode: google: chromeos: Remove old fmap.c fileJulius Werner
This file became obsolete when FMAP code moved to src/lib/ and is no longer built by any Makefile. Let's remove it to avoid confusing people. Change-Id: I55639af28f9f3d4c4cb0429b805e3f120ecc374e Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/12753 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-12-17soc/intel/fsp_baytrail: Adjust root port INT routingMartin Roth
Adjust the root port INT routing based on Bay Trail spec: Document Number: 538136, Rev. 3.9 Table 241. Interrupt Generated for INT[A-D] Interrupts INTA INTB INTC INTD Root Port 1 INTA# INTB# INTC# INTD# Root Port 2 INTD# INTA# INTB# INTC# Root Port 3 INTC# INTD# INTA# INTB# Root Port 4 INTB# INTC# INTD# INTA# Change-Id: I22a8c0bc6ad731dfb79385d6e165f1ec0a07507d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12684 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
2015-12-16intel/fsp_baytrail: change indent to use tabsBen Gardner
Change-Id: If0d0a15442738bab0e34f1b05513e7f8e8fa9afc Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12698 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-16northbridge/intel ACPI: Remove unused Local methodMartin Roth
The remainder of the divide operation was being placed into a Local, but was never being used, causing an IASL warning. Since this field is optional, just remove the Local. Fixes IASL warning: dsdt.aml 640:Divide (Multiply (CTDN, 125), 100, Local0, PL2V) Warning 3144 - Method Local is set but never used ^ (Local0) Change-Id: I0b43ef638b1bc3e1163c45f31f8da57aa0d39e22 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12706 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2015-12-16x86/smbios: Return index 0 for empty stringsBen Gardner
Section 6.1.3 (Text Strings) of the SMBIOS specification states: If a string field references no string, a null (0) is placed in that string field. Change smbios_add_string() to do that. Change-Id: I9c28cb89dcfe2c8ef2366c23ee6203e15b7c2513 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12697 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-16lib: Fix strncmpHannah Williams
strncmp continues to compare the characters in the input strings past any null termination it may encounter. Null termination check is added. Reviewed-on: https://chromium-review.googlesource.com/314815 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Hannah Williams <hannah.williams@intel.com> Tested-by: Hannah Williams <hannah.williams@intel.com> (cherry picked from commit ca7022752115eddbcb776f0c0d778249555ddf32) Reviewed-on: https://chromium-review.googlesource.com/315130 Change-Id: Ifc378966dcf6023efe3d32b026cc89d69b0bb990 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/12721 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-12-16intel/fsp_baytrail: rename include folder baytrail to include/socBen Gardner
This is to match the layout of the non-fsp baytrail to make comparisons easier and possibly remove duplicate files. Change-Id: I9a94842d724ab3826de711d398227e7bdc1045ff Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12686 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-16southbridge/amd/sb600: Update HPET base address with #defineMartin Roth
The SB600 code had the base address of the HPET hardcoded throughout. It looks like the plan was to have it be updated in ACPI if needed, but this wasn't ever implemented. The variable names being used to do this update were the same, causing an IASL warning. Because of this, the operation to update the HPET address actually did nothing. This was fine, because it didn't actually need to be updated. - Replace all that code with a #define. - Add and update some comments in the same area. Fixes IASL warning: dsdt.aml 1505: Store(HPBA, HPBA) Warning 3023 - ^ Duplicate value in list (Source is the same as Target) Change-Id: I9ba5fe226a4a464e0045ce7d3406898760df5e5a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12705 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-12-16intel/fsp_baytrail: Fix PCI_DEV_PIRQ_ROUTE macro endingBen Gardner
The macro PCI_DEV_PIRQ_ROUTE ends with a comma and escaped newline. Ending a macro with an escaped newline is always wrong. The final comma is not necessary, as all uses of PCI_DEV_PIRQ_ROUTE() properly separate calls with a comma. I haven't investigated whether this is causing a real issue, but it should be leaving gaps in struct baytrail_irq_route.pcidev. The non-FSP baytrail does not have this issue. Change-Id: If6782176068b07cb3bc819c00d1cdb1b618bcea8 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12696 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2015-12-16build system/x86: depend on directories before touch /empty targetsAlexander Couzens
$(objgenerated)/empty would touch files before the directory is created on parallel builds. Thanks to reproducible-builds.org for hitting this bug. Change-Id: I7565e9fe130b4e9deaf1c7b9d568ff90b00dda52 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/12717 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-16soc/samsung/exynos5250: Implement hard_reset()Stefan Reinauer
Implement hard_reset() as power_reset() to make vboot happy. Change-Id: I16831055bd6ba8a8c95836fcf31f29c068153fcc Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/12722 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2015-12-16intel/skylake: Work around ROMCC optimization bugStefan Reinauer
On Skylake systems, the bootblock fails to compile with the following error message: bootblock_simple.c:6.1: 0x13930e0 copy Internal compiler error: non dominated rhs use point 0x13a3f70? Aborted (core dumped) The option -fno-simplify-phi works around the issue, but will cause the code to use more registers, hence we also need to enable -mcpu=p4 (see intel/truxton mainboard for another example of where this has been done in the past) Change-Id: Iea1a1ba18d76c7323bb626c5f4b0032e4ee04a86 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/12719 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-15x86 acpi: remove ALIGN_CURRENT macroAaron Durbin
The ALIGN_CURRENT macro relied on a local variable name as well as being defined in numerous compilation units. Replace those instances with an acpi_align_current() inline function. Change-Id: Iab453f2eda1addefad8a1c37d265f917bd803202 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12707 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-15mainboard/asus/kgpe-d16: Enable romstage spinlocksTimothy Pearson
Change-Id: Iac1adbeacdcded7faff2443b78a491cbb8a90fe8 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12628 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-15src/console: Add x86 romstage spinlock option and printk spinlock supportTimothy Pearson
This paves the way for AP printk spinlock on AMD platforms Change-Id: Ice42a0d3177736bf6e1bc601092e413601866f20 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/11958 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-15google/oak: Move CHROMEOS specific Kconfig objects under CHROMEOSMartin Roth
The symbols CHROMEOS_VBNV_EC, EC_SOFTWARE_SYNC, and VIRTUAL_DEV_SWITCH should only be selected if CHROMEOS is selected. Change-Id: I07ef631d63be53cf99a6bf61d0e91b88728dbba3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12659 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-13amd/[nb/fam10|sb/sr5650]: Minor cosmetic changesTimothy Pearson
Change-Id: Ia9cb4fe4f46327e38648f89da0ffce647fb118d3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12712 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-11build system: Switch to fmap based firmware layoutPatrick Georgi
We still add a master header for compatibility purposes, and the default layouts don't cover anything non-coreboot (eg. IFD regions) yet. The default layouts can be overridden by specifying an fmd file, from which the fmap is generated. Future work: - map IFD regions to fmap regions - non-x86: build minimalistic trampolines that jump into the first cbfs file, so the bootblock can be part of CBFS instead of reserving a whole 64K for it. - teach coreboot's cbfs code to work without the master header - teach coreboot's cbfs code to work on different fmap regions Change-Id: Id1085dcd5107cf0e02e8dc1e77dc0dd9497a819c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/11692 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-12-11fsp1_1: supply fsp version to mrc_cache APIAaron Durbin
The memory init code needs to match the saved mrc data. To ensure that invariant holds supply the FSP version when using the mrc cache API. BUG=chrome-os-partner:46050 BRANCH=None TEST=Built and booted on glados. Verified version mismatch checking works. Change-Id: I3f6dd19cb15a18761d34509749adafc89a72ed2d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12701 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-11mrc_cache: add version fieldAaron Durbin
In order to allow for updateable memory init code on intel x86 platforms one needs to ensure the saved mrc data matches the code consuming the data. To that end add a version field to the saved data structure. BUG=chrome-os-partner:46050 BRANCH=None TEST=Built and booted on glados. Suspended and resumed. Also verified version mismatch path. Change-Id: Ie86db1750af5d9bff6446999b0d04b60612f8d29 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12700 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-10ati/ragexl: Change .h #defines named CONFIG_ to CFG_Martin Roth
The CONFIG_ prefix should be reserved for Kconfig symbols. Change-Id: I1d3141e0f5f9e1161bc7f88158af8a5d5780829c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12564 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 10:16:50 +0000