summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2018-05-14grunt: use stage cache when waking from S3Raul E Rangel
BUG=b:79154155 TEST=built and tested on grunt 31 entries total: 0:1st timestamp 20,917 900:calling AmdInitReset 87,525 (66,608) 901:back from AmdInitReset 98,318 (10,793) 902:calling AmdInitEarly 99,165 (847) 903:back from AmdInitEarly 139,619 (40,454) 5:start of verified boot 156,301 (16,682) 503:starting to initialize TPM 156,697 (396) 504:finished TPM initialization 186,107 (29,410) 505:starting to verify keyblock/preamble (RSA) 187,316 (1,209) 506:finished verifying keyblock/preamble (RSA) 208,000 (20,684) 507:starting to verify body (load+SHA2+RSA) 208,108 (108) 508:finished loading body (ignore for x86) 273,238 (65,130) 509:finished calculating body hash (SHA2) 290,364 (17,126) 510:finished verifying body signature (RSA) 294,236 (3,872) 511:starting TPM PCR extend 295,071 (835) 512:finished TPM PCR extend 320,512 (25,441) 513:starting locking TPM 320,514 (2) 514:finished locking TPM 332,081 (11,567) 6:end of verified boot 332,083 (2) 13:starting to load romstage 332,187 (104) 4:end of romstage 395,559 (63,372) 10:start of ramstage 395,999 (440) 916:calling AmdS3LateRestore 396,135 (136) 917:back from AmdS3LateRestore 428,066 (31,931) 30:device enumeration 428,087 (21) 40:device configuration 434,640 (6,553) 50:device enable 438,185 (3,545) 60:device initialization 439,565 (1,380) 70:device setup done 453,326 (13,761) 918:calling AmdS3FinalRestore 454,363 (1,037) 919:back from AmdS3FinalRestore 455,520 (1,157) 98:ACPI wake jump 467,541 (12,021) Total Time: 446,624 Change-Id: I326e81d3c987130e258c616c7c66dd82ddc0d942 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/26219 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-14program_loading: make types a mask, make unknown type a non-zeroRonald G. Minnich
This will allow loading of programs that are more than one type, e.g. ramstage type might now be a stage or payload. Further, unknown types of 0 are dangerous, make it a real value. Change-Id: Ieb4eeb7c5934bddd9046ece8326342db0d76363c Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/26242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-05-13drivers/pc80/tpm: get ioport from pnp recordsKevin Cody-Little
Had 0x2e hardcoded, which is often the SuperIO chip. Instead, pull the port from the PNP tree generated from devicetree.cb, where either 0x4e or 0x2e will be specified. Change-Id: I4a92693f8acd3a1618cefcdf6b25eb22a727e20f Signed-off-by: Kevin Cody-Little <kcodyjr@gmail.com> Reviewed-on: https://review.coreboot.org/26203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-05-13mainboard/asus: Add license headersNoah Glovsky
Change-Id: I71e461b91f981368d4bd13631b868430d1fc5774 Signed-off-by: Noah Glovsky <noah.glovsky@watershedschool.org> Reviewed-on: https://review.coreboot.org/14530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-05-13mainboard/hp: Add HP Elitebook 8770wxiinc37
This is based on the code from the 8470p port. Tested on the quad core/quad SODIMM version. This laptop uses discrete MXM 3.0b graphics cards. Tested working with both Quadro K3000M and GTX 980M 8GB. The laptop must be completely disassembled down to the motherboard to perform the initial flash, subsequent flashes can be done internally via flashrom. There is a simple mod that can be performed to make subsequent external flashes easier in case of a brick, I'll put more information on this on the wiki later. The lack of an MXM structure built in to the firmware causes the GPU to enter a mode with nerfed performance, there is a workaround though, I'll add this to the wiki as well. I have no info on EHCI debugging. Tested and working: - memory: 4G+4G, 4G+4G+4G+4G - Linux (Debian Stretch with kernel 4.9.0) booted from SeaBIOS payload with graphics init disabled in coreboot. I allowed SeaBIOS to load the VBIOS from the MXM. - WLAN - keyboard, trackpoint and touchpad - USB - serial port on dock - fan control - VGA - DisplayPort - Audio - Both HDD SATA ports, ODD SATA, eSATA - S3 with SeaBIOS 1.11, SERCON must be disabled - Brightness and volume FN keys - Mute and calculator hotkeys - Status LEDs - Bluetooth Not working: - GRUB2 as payload will freeze. Has something to do with at_keyboard module. The built in keyboard requires this module to function though. - Sleep FN key - WiFi toggle and internet browser hotkeys - S3 fails to resume (restarts) if the laptop is removed from AC power, or gets unplugged and then plugged back in while suspended. Sleep status LEDs remain normal during this process. Change-Id: Ic4ff64e9cf0c7a51ac48ca2fe6fe8beab02e9f9a Signed-off-by: Robert Reeves <xiinc37@gmail.com> Reviewed-on: https://review.coreboot.org/23651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-05-13timestamp: Add timestamps for TPM communicationRaul E Rangel
On grunt these operations combined take a little over 37ms. BUG=b:64549506 TEST=built on grunt 511:starting TPM PCR extend 301,268 (598) 512:finished TPM PCR extend 326,710 (25,442) 513:starting locking TPM 326,716 (6) 514:finished locking TPM 339,517 (12,801) Change-Id: I05cfb3d0f8463f073e329a035484a340546649e1 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/26218 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-12superio/ite/it8623e: initialize the PWM fan controllerKevin Cody-Little
Copies the common/env_ctrl support code from the it8728f driver. Tested on an ASUS AM1I-A using Linux 4.16.7-gentoo as payload, and booting userspace without a kexec call. Prior to this change, an error was given during boot: it87 it87.656: Detected broken BIOS defaults, disabling PWM interface After this change, the message is gone, and PWM fan control works through the /sys/class/hwmon interface. Change-Id: Id97c4ec19562e7c78308c5afe6ff7c938922c9e7 Signed-off-by: Kevin Cody-Little <kcodyjr@gmail.com> Reviewed-on: https://review.coreboot.org/26224 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-12mb/google/poppy/variants/nami: Provide implementation of mainboard_vbt_filenameFurquan Shaikh
This change adds board-specific implementation of mainboard_vbt_filename which returns "vbt.bin" by default. This is in preparation to allow multiple vbt binaries to be added to single image. More sku_id specific names will be added in follow-up CLs. BUG=b:79396300 Change-Id: I3821d55bfbe9e5773bd2eb0b0003045a80158d8c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-11purism/librem_bdw: Rename Broadwell baseboard from BDL to BDWYouness Alaoui
My bad, it seems the acronym for Broadwell is BDW, and not BDL, so I'm renaming librem_bdl into librem_bdw and changing the KConfig options accordingly. Change-Id: I8e992aa3474863236adf8893fcbe37c1b801fa25 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/26237 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-11drivers/intel/gma: honor vbt_size parameter to locate_vbt()Aaron Durbin
In 4a3956d7 (drivers/intel/gma, soc/intel/common: improve cooperation) the vbt_size parameter was not honored leading to the use of unitialized variables from the caller. Instead, keep track of if the vbt is already loaded by using the size returned from the load. If it's non-zero the vbt has been loaded. BUG=b:79562868 Change-Id: Ia1c47f0d982fae74e0223922f83943c68a846aa9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/26236 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-11mainboard/google/coral: Override VBT selection for epauletteren kuo
Current VBT setting for T8 is only 1ms which is under Innolux N116BCA-EA1 panel's spec. Modify T8 to 100ms. (Innolux's panel's spec requires T8 needs to be greater than 80ms BUG=b:78541692 BRANCH=master TEST=emerge-coral depthcharge coreboot chromeos-bootimage Run on DUT and check panel sequence meets spec. Change-Id: I5f9103aca7871095a828a74cd6a97e1951adb81f Signed-off-by: Ren Kuo <Ren.Kuo@quantatw.com> Reviewed-on: https://review.coreboot.org/26214 Reviewed-by: Ren Kuo <ren.kuo@quantatw.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-11mb/google/reef/variants/: Add new memory IDren kuo
Add a new RAM ID of memrory PN:MT53E512M32D2NP BUG=b:78491470 TEST= emerge-coral coreboot chromeos-bootimage. Signed-off-by: Ren Kuo <Ren.Kuo@quantatw.com> Change-Id: I855702c2850887df74941e00da69322124557498 Reviewed-on: https://review.coreboot.org/26213 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Ren Kuo <ren.kuo@quantatw.com>
2018-05-11asrock/b75pro3-m: Add superio ACPI declarationsIru Cai
Without it the PS/2 keyboard doesn't work after booting into the OS. Change-Id: Idcb0ea0779fcd5dfd6e0fbf33a532ecf0caec420 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/26131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-11purism/librem_bdl: Add support for Librem 15 v2Youness Alaoui
Adding new librem_bdl variant for the Librem 15 v2, which is very similar to Librem 13 v1, with the following differences: - SATA ports 0 and 1 instead of 0 and 3 - SATA DTLE IOBP value is 7 instead of 9 for port 0 - There is no LAN device - There are two SODIMM slots, and DQs are interleaved - USB ports are different Change-Id: Ifaca382a540d085e6c919daa992a0fbd52643a5b Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/26184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-11purism/librem_bdl: Convert to variant setupYouness Alaoui
Convert the purism/librem13v1 to a variant setup, in preparation for adding the librem15v2 board as a new variant. The Librem 13 v1 and Librem 15 v2 are nearly identical, so this minimizes new code to add support for the latter. Also update the URL in board_info to an archive.org link. Change-Id: I00bb82b9e895e2464ddaa92915c01ce0e35933a2 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/26183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-11nb/intel/i945/bootblock.c: Correct commentElyes HAOUAS
Change-Id: Ic28ff80eb1dae6d0a307e2a1b73e8129fffbac13 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-11nb/intel/i440bx: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I69c8b95ff1937c0b08147d9e26a3118c58129cf5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-11acpi: Add support for writing ACPI _PLD structuresDuncan Laurie
This commit adds support for writing ACPI _PLD structures that describe the physical location of a device to the OS. This can be used by any device with a physical connector, but is required when defining USB ports for the OS. A simple function is provided that generates a generic _PLD structure for USB ports based on the USB port type. Change-Id: Ic9cf1fd158eca80ead21b4725b37ab3c36b000f3 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/26171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-05-11acpi: Add support for generating ACPI _UPCDuncan Laurie
This commit adds support for writing ACPI _UPC structures that help describe USB ports for the OS. This is a simple structure format which indicates what type of port it is and whether it is connectable. It should be paired with an ACPI _PLD structure to define USB ports for the OS. Change-Id: Ide3768f60f96e9ad7f919ad3fb11d91045dc174a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/26170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-11devicetree: Add USB device typeDuncan Laurie
This commit adds support for describing USB ports in devicetree.cb. It allows a USB port location to be described in the tree with configuration information, and ACPI code to be generated that provides this information to the OS. A new scan_usb_bus() is added that will scan bridges for devices so a tree of ports and hubs can be created. The device address is computed with a 'port type' and a 'port id' which is flexible for SOC to handle depending on their specific USB setup and allows USB2 and USB3 ports to be described separately. For example a board may have devices on two ports, one with a USB2 device and one with a USB3 device, both of which are connected to an xHCI controller with a root hub: xHCI | RootHub | | USB2[0] USB3[2] device pci 14.0 on chip drivers/usb/acpi register "name" = ""Root Hub"" device usb 0.0 on chip drivers/usb/acpi register "name" = ""USB 2.0 Port 0"" device usb 2.0 on end end chip drivers/usb/acpi register "name" = ""USB 3.0 Port 2"" device usb 3.2 on end end end end end Change-Id: I64e6eba503cdab49be393465b535e139a8c90ef4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/26169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-11mb/google/poppy/variants/atlas: add SPD for new samsung 4GB memoryCaveh Jalali
This adds a new SPD entry for samsung's new 4GB memory and updates atlas to use it instead of the previous gen memory. BUG=b:79444337 TEST=booted on atlas Change-Id: I19567736c45a1321586378c3d964c2cbebe24755 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/26185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-11mb/google/octopus: Ignore standby state for DMIC pinsShamile Khan
This keeps Audio clock and data pins ON in S0ix to support Wake on Voice. BUG=b:77605180 BRANCH=none TEST=Checked that S0ix suspend/resume works. Validation of WoV was done on glkrvp previously. For Yorp, audio topology firmware updates are required for testing WoV. Change-Id: Idafe4e7d24fe16f8e8ff3dd86e299776ea860d03 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/26202 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-11mb/google/poppy/variants/nami: add 2-channel LPDDR3 memoryT.H. Lin
hynix/H9CCNNNCLGALAR-NUD nayna/NT6CL256T32CM-H1 BUG=b:79443146 BRANCH=Nami TEST=emerge-nami coreboot chromeos-bootimage Change-Id: I3a362080b9e60adecbac14d5cfe193da44bf87c8 Signed-off-by: T.H. Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/26187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-10AGESA f14: Remove OPTION_DDR2Kyösti Mälkki
Was never used for the boards in our tree. Change-Id: Ib9e9ab25ccb8d1d556fdeb8bb4c6558f25bb81b6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-10AGESA f14 vendorcode: Only have f14 Ontario configKyösti Mälkki
Change-Id: I8cf2f23d785e934371dfa687483491cd22b9863d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-10bootmem: Keep OS memory map separate from the startJulius Werner
The patch series ending in 64049be (lib/bootmem: Add method to walk OS POV memory tables) expanded the bootmem framework to also keep track of memory regions that are only relevant while coreboot is still executing, such as the ramstage code and data. Mixing this into the exsting bootmem ranges has already caused an issue on CONFIG_RELOCATEABLE_RAMSTAGE boards, because the ramstage code in CBMEM is marked as BM_RAMSTAGE which ends up getting translated back to LB_RAM in the OS tables. This was fixed in 1ecec5f (lib/bootmem: ensure ramstage memory isn't given to OS) for this specific case, but unfortunately Arm boards can have a similar problem where their stack space is sometimes located in an SRAM region that should not be made available as RAM to the OS. Since both the resources made available to the OS and the regions reserved for coreboot can be different for each platform, we should find a generic solution to this rather than trying to deal with each issue individually. This patch solves the problem by keeping the OS point of view and the coreboot-specific ranges separate from the start, rather than cloning it out later. Ranges only relevant to the coreboot view will never touch the OS-specific layout, to avoid the problem of losing information about the original memory type of the underlying region that needs to be restored for the OS view. This both supersedes the RELOCATABLE_RAMSTAGE fix and resolves the problems on Arm boards. Change-Id: I7bb018456b58ad9b0cfb0b8da8c26b791b487fbb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26182 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-09mainboard/google/.../terra: Fix ACPI external definition errorsMartin Roth
According to ACPI 6.1 spec 19.6.44, External informs compiler that object is external to this TABLE, no necessary for object in same DSDT tables. A name cannot be defined and declared external in the same table (GPID) A name cannot be defined and declared external in the same table (CTOK) Change-Id: Ica80b59ad6a8af865bf1551ac4e014ec5f4e7d08 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26122 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-09mb/google/poppy/variants/nocturne: update Audio configurationSathyanarayana Nujella
This patch updates the below: 1) Nocturne board has only Max98373 speaker amp. Update both NHLT and DT entries to include only Max98373 and not include DA7219. 2) I2S2 is used for Boot Beep. So, update GPP_F0 ~ F2 pins accordingly. 3) Include DMIC-4ch configuration. BUG=b:79362472 TEST=None [Waiting for HW to verify] Change-Id: I0e9b3a564c22de6e84e96e5e937a3aca4ae73d75 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/26143 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-09lenovo: Add various data.vbtPatrick Rudolph
Add the Video Bios Table to improve user experience when running coreboot's blob free graphics init. As it's not a binary blob it should not be added to the blobs repo. This is taken from vendor BIOS and contains purely documented configuration data, so it should not be subjected to copyright. Extracted using intelvbttool with applied patch I8cbde042c7f5632f36648419becd23e248ba6f76 "util/intelvbttool: Rewrite tool" Change-Id: I15573ddd37ee9738df1f7178f967131687a50f48 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/25926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-09drivers/intel/gma, soc/intel/common: improve cooperationPatrick Georgi
Instead of both featuring their own VBT loaders, use a single one. It's the compression-enabled one from soc/intel/common, but moved to drivers/intel/gma. The rationale (besides making all the Kconfig fluff easier) is that drivers/intel/gma is used in some capacity on all platforms that load a VBT, while soc/intel/common's VBT code is for use with FSP. BUG=b:79365806 TEST=GOOGLE_FALCO and GOOGLE_CHELL both build, exercising both affected code paths. Change-Id: I8d149c8b480e457a4f3e947f46d49ab45c65ccdc Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/26039 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-09mainboard/asus/am1i-a: fix interrupt routing definitions in DSDTGergely Kiss
Incorrect interrupt routing configuration prevented handling interrupts for devices behind PCIe bridges 00:02.1 and 00:02.5. With the new configuration, devices work as expected. Tested with Linux 4.10 booted with the "pci=nomsi" parameter. Change-Id: I3c95be7ba6207697afc7983d4b5f9d9a28584723 Signed-off-by: Gergely Kiss <mail.gery@gmail.com> Reviewed-on: https://review.coreboot.org/23771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-09mb/technexion: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I6efd1675b1124b200b5ff16fdef91c10b77b69d1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-09mb/avalue: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I7f1276ee593928956913eaeecd62fd3018cc9ae2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-09mb/asrock: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I4b2b8593c98791dac7a5c016e75d2c05bcfbf890 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-09mb/a785e-i: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I15f160c1e30496461f7100e3bd3a2e2467c64c4a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-09cpu/amd/quadcore: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I6cb8f36dea4a22fdf05c57bb3e3dcaeb2da8020f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-09mb/asus: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I8fe817bb514c69a647c2208a0573a2c5fe98722d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-09mb/bap: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I6fc056acb8ff16a943352342b99a9ede6558d438 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-09mb/amd: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I01270248bddf07df4c959f0c632e722728d0cd03 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-09{device,drivers,lib,mb,nb}: Use only one space after 'if'Elyes HAOUAS
Change-Id: I390191fb58605d1bd6a2e5d19a9dfa7c8493e6b2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-09sdm845: Add DRAM resourcesT Michael Turney
TEST=build Change-Id: Icf934caf8b4584ef2633054a5cc7f5be7cc734ee Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/25212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-05-09src/southbridge: Serialize methods with named objects insideMartin Roth
Change-Id: Ia9d884d7247f0cc3a175de31649d0163c69f1299 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-09src/mainboard: Serialize methods with named objects insideMartin Roth
Change-Id: I90e1d8b9f8e37bec8fc2796637b4548ea17e076b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-09mainboard/bap/ode_e20xx: Remove commented out asl code.Martin Roth
Change-Id: I64229d12e9e7fd54eaae3425ae9546872c5bf8f3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-09vendorcode/amd/pi/00670F00: Control which procedure buildsRichard Spiegel
Vendor code is compiled as a library, thus the whole library is included into the final image. However, not all procedures are required, they are there because original AGESA code had them. We cannot remove them, in order to facilitate porting of fixed AGESA code. Therefor add #if throughout the code to allow the control if unneeded procedures will be build. BUG=b:78610011 TEST=Build and boot grunt; build kahlee and gardenia. Change-Id: I68f9e359b2331f715a3b85486c4181866985afdf Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/26135 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-09vendorcode/amd/pi/00670F00: Remove unneeded includesRichard Spiegel
Vendor code has several headers included into source code that are not needed in order to build them. Remove unneeded #include. This is part of controlling the build of unneeded procedures within vendor code. BUG=b:78610011 TEST=Build grunt. Change-Id: Id7d451b6be564632836fc64fd343131edb85183a Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/26134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-09mb/gizmosphere: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I75258ecc5f3881012c3f767c8b970a1f10c6abbd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-09mb/elmex: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: If4ec2e2e7cca8d8f3e5abfd9cd204f86e367b44a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-09mb/esd: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I5928e871b8e9ba5964c02fbabb7a9d8dc9ecc0a8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-09mainboard/google/eve: Add subsystem_idHarsha Priya
This patch adds subsystem_id for eve as 0x006B. The value is set in nhlt structure which will be used by endpoints as well. Change-Id: Id6910678c4d6e92ed45c776f174855efd26f9e27 Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Reviewed-on: https://review.coreboot.org/26139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-06 22:56:15 +0000