Age | Commit message (Collapse) | Author |
|
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and
DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal Shutdown
when S0ix is enabled.
BUG=None
BRANCH=None
TEST=Verified Thermal Device (B0: D20: F2) TSPM offset 0x1c [LTT (8:0)]
value is 0xFE on Sarien.
Change-Id: Ibc336be0523ff4e65a818474907faf20fc417ff4
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33131
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and
DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal shutdown
when S0ix is enabled.
BUG=None
BRANCH=None
TEST=Verified Thermal Device(B0: D18: F0) TSPM offset 0x1c [LTT (8:0)]
value is 0xFE on Arcada.
Change-Id: I1915b974b10638b0f6ab97c6fb9b7a58d2cabc59
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Recent Coverity scan indicated potential NULL deference; if either
spi->dma_in or spi->dma_out are NULL, the fifo_error() check could
dereference a NULL pointer.
Also fixed what appears to be a logic bug for the spi->dma_out case,
where it was using the todo (count) from spi->dma_in.
Found-by: Coverity CID 1241838, 1241854
Change-Id: Icd1412f0956c0a4a75266d1873d5e9848aceee32
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34787
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The common code adheres to the Intel requirement of bringing up the
cores with INIT SIPI SIPI. This sequence is tolerated on some AMD
AMD CPUs but fails on others. Add a way to skip the second SIPI.
TEST=Mock up on grunt and verify no errors
BUG=b:138919564
Change-Id: I201869003ddc7d04d332cd5734ac6d63979d89e0
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34759
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There was the potential for misuse of the override early GPIO table,
because if the override early GPIO table did not have a corresponding
entry in the base table, it would not get overridden, and there was
no way to know except manual inspection (this has already happened
here), so now all hatch mainboards are required to explicitly list out
all of their required early GPIOs.
TEST=booted several hatch boards, verified that they can communicate
with TPM and successfully train memory
Change-Id: I0552b08a284fd6fb41a09fef431a0d006b0cf0bd
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
Currently SPI bus id is used to map to the controller in order to set
the controller state. In certain platforms SPI bus id might not be
exactly the same as GSPI bus id. For example, in Intel platforms SPI bus
id 0 maps to fast spi i.e. SPI going to the flash and SPI bus id 1 .. n
map to GSPI bus id 0 .. n-1. Hence using SPI bus id leads to mapping to the
GSPI controller that is not enabled. Use the GSPI id bus so that the right
controller is set to active state. This fixes the regression introduced
by CB:34449
BUG=b:135941367
TEST=Boot to ChromeOS.
Change-Id: I792ab1fa6529f5317218896ad05321f8f17cedcd
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Tested on qemu-riscv.
Depends on OpenSBI integration and proper memory detection in qemu.
Boots into Linux until initrd should be loaded.
Tested on SiFive/unleashed:
Boots into Linux until earlycon terminates.
Change-Id: I5ebc6cc2cc9e328f36d70fba13555386bb8c29d6
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30292
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
vboot_setup_tpm returns (TPM_SUCCESS == 0) on success.
In this case, call antirollback_read_space_firmware.
This regression was introduced in CB:34510.
BUG=b:139101213
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Ifdea1d85167a50a1ada5afe9b107408e3a2e0d6f
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34790
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: caveh jalali <caveh@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes CONFIG_CPU_ADDR_BITS kconfig from
soc/intel/<soc>/Kconfig as not getting used anymore.
Change-Id: Ie7fa386c9c0aae19da1fbd09407494d9812247a4
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34768
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch helps to generate correct MTRR mask value while
using set_var_mtrr().
example:
set_var_mtrr(1, 0x99000000, 16*MiB, WP)
without CL :
0x0000000099000005: PHYBASE2: Address = 0x0000000099000000, WP
0x0000000fff000800: PHYMASK2: Length = 0x0000007001000000, Valid
with CL :
0x0000000099000005: PHYBASE1: Address = 0x0000000099000000, WP
0x0000007fff000800: PHYMASK1: Length = 0x0000000001000000, Valid
Change-Id: Ie3185dd8d4af73ec0605e19e9aa4223f2c2ad462
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34753
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Previous setting was correct but assumed SMI handler is
always located at the beginning of TSEG. Break the assumption.
Change-Id: I5da1a36fc95f76fa3225498bbac41b2dd4d1dfec
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34730
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The callers don't necessarily check return value of
function. Make sure the parameters are not left
uninitialised in that case.
Change-Id: Ic02db2d35b2ec88506320e7df609940de4aef005
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34708
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Do this to avoid some amount of explicit typecasting
that would be required otherwise.
Change-Id: I5bc2c3c1dd579f7c6c3d3354c0691e4ba3c778e1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This is declared weak so that platforms that do not
have smm_subregion() can provide their own implementation.
Change-Id: Ide815b45cbc21a295b8e58434644e82920e84e31
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add explicit CBMEM_STAGE_CACHE option. Rename
CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM to TSEG_STAGE_CACHE.
Platforms with SMM_TSEG=y always need to implement
stage_cache_external_region(). It is allowed to return with a
region of size 0 to effectively disable the cache.
There are no provisions in Kconfig to degrade from
TSEG_STAGE_CACHE to CBMEM_STAGE_CACHE.
As a security measure CBMEM_STAGE_CACHE default is changed to
disabled. AGESA platforms without TSEG will experience slower
S3 resume speed unless they explicitly select the option.
Change-Id: Ibbdc701ea85b5a3208ca4e98c428b05b6d4e5340
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
To avoid confusion use VENDORCODE_ELTAN_VBOOT and
VENDORCODE_ELTAN_MBOOT config values.
Include verfied_boot and mboot subdirectories as CPPFLAGS when
measured boot or verified boot is enabled. This allows to generate
binary with measured boot enabled only.
BUG=N/A
TEST=Boot Linux 4.20 and verify logging on Facebook FBG-1701
Change-Id: Iaaf3c8cacbc8d2be7387264ca9c973e583871f0a
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33442
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The BMC on Supermicro X11SSH takes 34 seconds to start the IPMI KCS, but
the default timeout of the IPMI KCS code is just 100 msec.
Add a configurable timeout option to wait for the BMC to become ready.
As it only should boot very long after power on reset, it's not a
problem on reset or warm boot.
Tested on Supermicro X11SSH.
The IPMI driver doesn't fail with a time-out any more.
Change-Id: I22c6885eae6fd7c778ac37b18f95b8775e9064e3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
BUG=b:124141368
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I2e04c16e309d765353f152203a44e90d997394d1
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Sometimes the display native orientation does not match the device
default orientation. We add a parameter to be passed to libpayload,
which can then do the rotation.
BUG=b:132049716
TEST=Boot krane, see that FW screen is orientation properly.
Change-Id: I5e1d94b973a3f615b73eebe0ca1202ba03731844
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I12e6ec4aec7dcadcbb886c3fc4c3b9126a0a835c
Signed-off-by: Sourabh Kashyap <sourabhka@hcl.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This CL adds a new board, QEMU/AArch64, for ARMv8. The machine supported
is virt which is a QEMU 2.8 ARM virtual machine. The default CPU of
qemu-system-aarch64 is Cortex-a15, so you need to specify a 64-bit cpu
via a flag.
To execute:
$ qemu-system-aarch64 -M virt,secure=on,virtualization=on \
-cpu cortex-a53 -bios build/coreboot.rom -m 8192M -nographic
Change-Id: Id7c0831b1ecf08785b4ec8139d809bad9b3e1eec
Signed-off-by: Asami Doi <d0iasm.pub@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: Iaf370e04adb04eb81555a57e81812ebe3339971d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The pinctrl driver in the linux kernel automatically turns off SCI
routing for all GPIOs exported via ACPI, so this patch sets up
dual-routing of the EMR_GARAGE_DET signal so that one can be used
for IRQs and one for the SCI wake.
Change-Id: Iadeb4502c5a98a72ba651bdcad626609656c196f
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34780
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The touchscreen controller was never added to the device tree, and the
next board rev will have this IC connected. Set it up in the device tree
with conservative power resource timings from the datasheet.
BUG=b:138869702
BRANCH=none
TEST=compiles; current board rev does not have touch IC
Change-Id: I759fb32f31c8eee0e6bd664c6a82308354ef5d08
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enabling stylus pen device and pen_eject event.
- Adding enable_gpio for power sequencing
- Configuring GPP_H4 and GPP_H5 as native function
- Adding PENH device node for pen ejection event
BUG=b:137326841
BRANCH=none
TEST=Verified pen input operation and pen_eject event (pop-up and wake
from s0ix on pen ejection)
Change-Id: Ic252a1f90c0fc6cb9b1e426d75a8b503824681f3
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
Platform does not set up IED.
Change-Id: Ied72888c6406b59332bc3d68eccb50bf1eab3419
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I361fb0e02fd0bd92bb1e13fe84c898a1ac85aa40
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34703
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implementation remains the same.
Change-Id: I8483bb8e5bba66b4854597f58ddcfe59aac17ae0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
No need to limit these declarations to FSP. Both
PARALLEL_MP_INIT smm_relocate() and TSEG_STAGE_CACHE
can be built on top of this.
Change-Id: I7b0b9b8c8bee03aabe251c50c47dc42f6596e169
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use a name consistent with the more recent soc/intel.
Change-Id: Ie69583f28f384eb49517203e1c3867f27e6272de
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use a name consistent with the more recent soc/intel.
Change-Id: I704d7cb637e4e12039ade99f57e10af794c8be97
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: David Guckian
|
|
Change-Id: I0900c3b893d72063cc8df5d8ac370cf9d54df17a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I471598d3ce61b70e35adba3bd983f5d823ba3816
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
FSP1.0 has low memory corruptions below CONFIG_RAMTOP
on S3 resume path, as romstage ram stack will be utilised
before there is a chance to make the necessary backup
to CBMEM.
Previously done for intel/minnowmax in commit b6fc727.
Change-Id: I2e128079b180f9978e8519b190648d516aaee0dc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34673
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Let garbage-collection take care of stage_cache_external_region()
if it is no needed and move implementation to a suitable file already
building for needed stages.
Remove aliasing CONFIG_RESERVED_SMM_SIZE as RESERVED_SMM_SIZE and
(unused) aliasing of CONFIG_IED_REGION_SIZE as IED_SIZE.
Change-Id: Idf00ba3180d8c3bc974dd3c5ca5f98a6c08bf34d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34672
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Vortininja needs different SAR values than meep. Use sku-id to load SAR values.
BUG=b:138261454
BRANCH=octopus
TEST=build and verified SAR values by sku id
Change-Id: I7b3ab51e1d6cada4faaba1b9d72bd9eacf6b04dd
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
This patch implements i2c driver for MT8183.
BUG=b:80501386
BRANCH=none
TEST=Boot correctly on kukui.
Change-Id: I0a4d78b494819f45951f78e5a618021000cf3463
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30976
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It fails if you call extract() when ramdisk is present but initrd
size is 0. This CL adds if-statement to throw an error when initrd
size is 0.
Change-Id: I85aa33d2c2846b6b3a58df834dda18c47433257d
Signed-off-by: Asami Doi <d0iasm.pub@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add support for the integrated TPM in Kconfig and update device tree.
Change-Id: I3a51545c493674aeed9aef72db24f77315d033ce
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change the TPM2 ACPI Table to support CRB Interface when selected.
Change-Id: Ide3af348fd4676f2d04e1d0b9ad83f9124e09dcc
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
When we use Intel Platform Trust Technologies, we need to verify
that the enable bit is set before we use the integrated TPM.
Change-Id: I3b262a5d5253648fb96fb1fd9ba3995f92755bb1
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add support for Intel PTT. For supporting Intel PTT we need to disable
read and write access to the TPM NVRAM during the bootblock. TPM NVRAM
will only be available once the DRAM is initialized. To circumvent this,
we mock secdata if HAVE_INTEL_PTT is set. The underlying problem is,
that the iTPM only supports a stripped down instruction set while the
Intel ME is not fully booted up. Details can be found in Intel document
number 571993 - Paragraph 2.10.
Change-Id: I08c9a839f53f96506be5fb68f7c1ed5bf6692505
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
When imlpementing changes in VBOOT, within the build process, tegra210
overflows into the romstage. Reduce the size of romstage from 104 to
100 and increase the size from verstage from 66 to 70.
Change-Id: Ie00498838a644a6f92881db85833dd0a94b87f53
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34640
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
* Increase log level from ERR to CRITICAL in run_ap_work().
* Print or return errors if mp_run_on_all_cpus() failed.
Tested on Supermicro X11SSH-TF.
Change-Id: I740505e3b6a46ebb3311d0e6b9669e7f929f9ab9
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch makes SPKR_PA_EN PIN output and high for boot beep
to work in pre-os environment.
BUG=b:135104721
BRANCH=NONE
TEST=Boot Beep is working with required ALC1011 depthcharge code
changes.
Change-Id: I012462f93e9e2bcafe5f18ce7d04e3fcd1db9ffa
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
|
|
The device Vortininja uses the variant meep, and supports WACOM/EMRIGHT
digitizer.
BUG=b:138276179
BRANCH=octopus
TEST=verified that WACOM/EMRIGHT digitizer can works.
Change-Id: I2bed4edb0261953f122f1d9ccca1fe4fa9406b33
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Drallion is a new mainboard using Intel Comet Lake SOC. As a starting
point, I took mainboard/sarien as the reference code and modified WHL
to Comet Lake.
BUG=b:138098572
Test=compiles
Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com>
Change-Id: I541952a4ef337e7277a85f02d25979f12ec075c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34497
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This implementation adds support to provide list of LPSS controllers
for a canonlake and icelake platforms. It implements strong function
of get_soc_lpss_controllers defined under intel common block lpss
driver.
Change-Id: I36c87e2324caf8ed3e4bb3e3dc6f5d4edf3e8d46
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add an API to check if device is a LPSS controller. This API can be
used for IRQ assignments for LPSS PCI controllers, since the LPSS
controllers have a requirement of unique IRQ assignments and do not
share same IRQ# with other LPSS controllers.
SOC code is reponsible to provide list of the LPSS controllers
supported and needs to implement soc_lpss_controllers_list API,
in case it needs to use this common implementation.
Change-Id: I3f5bb268fc581280bb1b87b6b175a0299a24a44a
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34137
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Increase reset delay to 120ms of touchscreen to meet wacom touchscreen
T4 specification and resolve re-bind hid over i2c driver failed after
touchscreen firmware auto update.
BUG=b:132211627
TEST=Stress touchscreen firmware auto update 200 times and not found
re-bind driver failed.
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: I488660aefdc6df27077efc7fec2f3b99adbaef9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mike Hsieh <mike_hsieh@wistron.corp-partner.google.com>
Reviewed-by: Nick Crews <ncrews@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|