summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2015-04-15veyron: Turn off SD card power in romstageJulius Werner
The only way to reliably reset an SD card in an unknown state is by power-cycling. Since a kernel may crash and reboot at any point, SD cards may be left in one of them fancy high-throughput modes that depthcharge (or, in fact, a newly booting kernel without prior knowledge) doesn't support, so we need to reset the card on every boot. This patch adds support to turn off an RK808 regulator completely and uses that to turn off SD card power rails in early romstage. The time until configure_sdmmc() in ramstage turns them back on should be more than enough to drain the power rail for an effective power-cycle. BRANCH=None BUG=chrome-os-partner:34289 TEST=Booted a Pinky from SD card, noticed that it works before and after this patch. Change-Id: Iaa5f7adaa59da69a964785c5e369ad73c6620224 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 95fba21907f1f3f686cb5a95b993736247db8f96 Original-Change-Id: I904b2d23ca35f765c000f9bee7637044f674eff9 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/233713 Original-Reviewed-by: Alexandru Stan <amstan@chromium.org> Original-Tested-by: Alexandru Stan <amstan@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9626 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15rk3288: implement spi_crop_chunk()Patrick Georgi
This function was added in upstream but was missing in Chromium OS Change-Id: I35debf65153e5f280343eebfe91438ecf665ba22 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9677 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-15Kconfig: Fix incorrect CONFIG_STACK_SIZE values for X86 and ARM64Julius Werner
Commit 54229a7 (arm: Fix checkstack() to use correct stack size) didn't quite hit the mark. Due to the crazy way our Kconfig includes work, It accidentally set CONFIG_STACK_SIZE to 0 even on architectures that need it. This patch fixes the issue by moving everything back to a single entry in src/Kconfig, making sure we end up with the intended numbers on all architectures. BRANCH=None BUG=chrome-os-partner:34750 TEST=Built for Pinky, Urara, Falco and Ryu. Confirmed that the generated .config contained CONFIG_STACK_SIZE=0x0 for the former two, and CONFIG_STACK_SIZE=0x1000 for the latter. Original-Change-Id: Ib18561925aafe7c74e6c4f0b10b55000a785e144 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/236753 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit c64b127e163f98162f3f7195b6ed09bd5a4b77c4) Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I2c747b04760bc97f43523596640bfb15317e5730 Reviewed-on: http://review.coreboot.org/9696 Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-04-14Add console wrapper for UART driverVadim Bendebury
Coreboot is designed to have a single serial console at most, on top of that it may have a CBMEM (virtual) console. Matters are complicated by the fact that console interface is different between bootblock and later stages. A linker list of console driver descriptors is used to allow to determine the set and type of console drivers at compile time. Even though the upstream seems to have done away with this approach, which does not seem the best idea. As an alternative this patch introduces a common wrapper which different UART drivers can plug in into. The driver exports a single API which can be used both directly (in bootblock) and through the wrapper (in later stages). The existing drivers can be adjusted to fit this scheme one by one. The common UART driver API also aligns fine with the upstream approach. BUG=chrome-os-partner:27784 TEST=none yet Original-Change-Id: Id1fe73d29f2a3c722bd77180beebaedb9bf7d6a1 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196660 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 94a36ad79a96f83d283c0fd073b05f98ae48820c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id1fe73d29f2a3c722bd77180beebaedb9bf7d6a1 Reviewed-on: http://review.coreboot.org/7872 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14storm: do not enable the ethernet switch by defaultVadim Bendebury
The ethernet switch, as soon as it is taken out of reset comes up in default (bridging) mode, which allows traffic to flow freely across the ports. Let's keep it in reset such that there is no cross port traffic happening while the device boots up. BRANCH=storm BUG=chrome-os-partner:32646 TEST=verified that the switch is held in reset during boot. Change-Id: Ia1dbb47d892d564145da17425a596bf9bad40d29 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 50551d8c9a44d1b63e0948070f6573adf7729d37 Original-Change-Id: I6bf698beddc98ce18fee6b3b39622e356c8cfbad Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/224989 Original-Reviewed-by: Toshi Kikuchi <toshik@chromium.org> Reviewed-on: http://review.coreboot.org/9465 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14samus: Declare TPM in devicetree.cb and include ACPI deviceDuncan Laurie
This adds the TPM device to the devicetree and configures an active high edge triggered interrupt at IRQ10 and adds the ACPI Device for the TPM into the DSDT. It also cleans up the EC PNP ID to use the EISAID for an EC since there are now two PNP devices declared, and removes the unused ENABLE_TPM define at the top of the DSDT. BUG=chrome-os-partner:33385 BRANCH=samus TEST=build and boot on samus, ensure TPM is functional at IRQ10 CQ-DEPEND=CL:226661 Change-Id: I4b9b016014d136fbf9a37003003632821ae93a53 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 0420e27b05d0f1568efa9beb849e0e8ff5995c86 Original-Change-Id: I2660cb30ac535da0b255603a619b9c09681ca947 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/226663 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9471 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14broadwell: Remove TPM device from lpc.aslDuncan Laurie
This is not a standard feature so it should be included by the mainboard if it is actually present in a system. BUG=chrome-os-partner:33385 BRANCH=samus,auron TEST=build and boot on samus CQ-DEPEND=CL:226663, CL:226664 Change-Id: Id4d0e5ed243dcb95e64fb8c848667f651b75aa4e Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 8909913f5c11c5805c77a3373859634b02a301e2 Original-Change-Id: Ib7c171a5a007a2dddfb3d80341c6dc488e383e99 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/226662 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9470 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14wtm2/samus: fix coreboot compilation error with tpmp removedHarry Pan
Since CL:226662, all TPMP accessing should be removed as well, else it will cause wtm2 coreboot failed on build. BUG=none BRANCH=none TEST=./setup_board --board=fox_wtm2 && emerge-fox_wtm2 coreboot CQ-DEPEND=CL:226662 Change-Id: Ib25f2d32997ef82b0ebf049803f2c5002a0a3abf Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: c99456bf42544518e2a36b6e0bbfe7f4ee1b4aff Original-Change-Id: Ia0eebb1924bbb23979c880f7d05600a0cf1e4ca3 Original-Signed-off-by: Harry Pan <harry.pan@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/232165 Original-Reviewed-by: Wei Shun Chang <wei.shun.chang@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/9477 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: increase drive strength for SPIM1 MFIOsIonela Voinescu
This change is made only to make sure there is a good signal strength on the SPIM lines. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works properly BRANCH=none Change-Id: I5b9427b14a407746fb5b707fa3b07a1a6774bfb1 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: e9d953283a5b43bf967128ca73db0e90c2df32df Original-Change-Id: Ia589134cf0557613697d49fb0bdb1848af66f0e8 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/249732 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9675 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: setup I2C0 clock and MFIOsIonela Voinescu
BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works properly BRANCH=none Change-Id: Ic805311d3aaf40da601c88cd05a73254088374bd Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: ad9427c069ed34ab91e93df59ec3361499b54982 Original-Change-Id: If8e142273afd2d591a975f4e7e34aa73e8d71b0c Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/250451 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9674 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: implement clock setup for I2C0Ionela Voinescu
BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; I2C0 clock is set up properly. BRANCH=none Change-Id: I15ffc5f7d8e8aadfc3cd249284bc492d0d13d9a1 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 6404ab6ad12ea1579eaf5ae55a9eddd9bd9f96e2 Original-Change-Id: Iafdf492291b47f0088f3b5e621d630b8d21ab106 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/250450 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9673 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: Reduce MIPS PLL jitterIonela Voinescu
The current MIPS PLL is configured in such a way that there is excessive jitter. Correct this by applying new PLL settings. The resultant frequency is 546MHz instead of 550MHz. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board as part of the JTAG loading script; BRANCH=none Change-Id: Ica1bfff29e01819b86cd2bb8b18d8adc9dfa3260 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 0c04354b49b73d234492521d81b6600d487175b0 Original-Change-Id: I28b41b1e82dbdf9da21bf0ab74f9722cdad923f1 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/245620 Original-Reviewed-by: James Hartley <james.hartley@imgtec.com> Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-on: http://review.coreboot.org/9671 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: Fix ROM clock base addressIonela Voinescu
The base address used was TOP CLOCK control address instead of the PERIPH CLOCK CONTROL. That was incorrect and is fixed with the current patch. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; now the hash accelerator, fed by this clock, is correctly clocked at 200MHz. BRANCH=none Change-Id: I0ead3951dc1dfc872881b8d1ae9b63f8104af50d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 871cb50ca43a6c760f346eb447e8ff102d8ca0b6 Original-Change-Id: I198d64f97a85a6fcf00c3853bf23d2d767e0e631 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/245313 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9670 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: add clock setup for MIPS CPU, ROM and EthernetIonela Voinescu
BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works properly BRANCH=none Change-Id: Ie386d6af9eeba7a72b1b88d515e6cb1821569c6b Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: d4b8d8b6f965296f9ecf62da8e5f383c3667b077 Original-Change-Id: I9eb464340b0475ae735ba5573ab0841dac0d74eb Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/243215 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9669 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: remove call to printk before UART is initializedIonela Voinescu
BUG=chrome-os-partner:31438 TEST=tested in Pistachio bring up board; previous delay at the beginning of bootblock is fixed. BRANCH=none Change-Id: I30335677c96bfd651bc49e36b562c48588009d67 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 3d1eb117644af1323dd940e0a82a2ef44025d5b9 Original-Change-Id: I122df1f985163836bb2ddd027ef6ab2ce265d5dd Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/243223 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9668 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: fix clocks setup codeIonela Voinescu
Some of the asserts were not done properly: the value has to be shifted before is matched with the mask. Added condition to exit while loop for USB clock setup. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; after this patch is applied none of the asserts fail and the code is executed properly. BRANCH=none Change-Id: Ib3aae9f7751a9f077bc95b6e0f9d63e3e16d8e4b Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 96999a4322ba98e87bc6746ad05b30cc56704e2e Original-Change-Id: I8d2d468d618ca1ffcb1421409122482444e6d420 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/243214 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9667 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: Use 1.8433179 MHz for UART refclkDavid Hendricks
BUG=chrome-os-partner:31438 BRANCH=none TEST=built and booted on urara w/ follow-up patches Change-Id: I3b03ce937e68539343e58b01e3bb714dd1f8c2dd Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 9493c57a14c8ab074baac1c065c6f39050dd9b2f Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I8e50c99913ea155ba0d5699f4789c1fe38b46808 Original-Reviewed-on: https://chromium-review.googlesource.com/243210 Original-Reviewed-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: http://review.coreboot.org/9666 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: increase size of bootblock to 18 KBIonela Voinescu
With the added code for clock and MFIOs setup, bootblock now exceeds 16KB. This patch increases the allowed limit to 18KB. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; works as expected BRANCH=none Change-Id: I166f882bd3db446bcd6f9e1f828cab22266c6ac7 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: da95db5ed348419b7905dc1ab68fd64d7b2eb5e0 Original-Change-Id: I0cacc6163f21ae3673c2716b12dde66bd48290f9 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/243213 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9665 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: change memory layout as to allow bigger CBFS cacheIonela Voinescu
As the payload increases in size, a bigger CBFS cache is required. Therfore, bootblock, romstage and the cbfs cache were placed in GRAM (128 K) and the stack and cbmem console were moved to SRAM (64 K). With the exception of CBFS cache, the sizes of all the other regions remains the same. BUG=chrome-os-partner:31438 TEST=tested on Pistachio FPGA and bring up board; behavior was as expected. BRANCH=none Change-Id: I19857f785ca1514f7483d582c7ad6ee470a8fefc Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: c895660dbdcd113bdc9d832beab30886313c28d6 Original-Change-Id: I004f8f081d04f83e3f5cee969e50803685cfdf67 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/236551 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9664 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14pistachio: spi: use same clock edge for RX and TXIonela Voinescu
When using this mode data is received and transmitted on the same edge of the SPFI clock, which allows for higher frequencies of operation. In this mode the maximum supported frequency is 50Mhz. If this mode is not enabled the maximum supported frequency is 25Mhz. BUG=chrome-os-partner:31438 TEST=tested on Pistachio bring up board; the SPFI hardware block is fed by the system clock (with a fixed freqency of 400 MHz). To achieve the SPFI frequency of 50MHz the internal divider of SPFI must be set to 64. To achieve a frequency of 25 Mhz the internal divider must be set to 32. A value of 64 = division by 8 A value of 32 = division by 16 BRANCH=none Change-Id: Ifd5f739b6157b99e4c1f92b5bb72615ee610ae6c Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 8b6cce616ec7926682d4eff096563acf1dfd6c65 Original-Change-Id: I337b6fcf462bcf6021ca77a8b1133cf49140ba76 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/241425 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9663 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14urara: Configure clocks and MFIOsIonela Voinescu
Set elements: - UART1 clock dividers and MFIOs - SPIM1 clock dividers and MFIOs - USB clock dividers - System clock divider - System PLL - MIPS CPU PLL BUG=chrome-os-partner:31438 TEST=tested on Pisachio bring up board; UART, SPI NOR, SPI NAND, and USB have proper functionality. BRANCH=none Change-Id: Ib01186a652fd59295a4cafc3ca99b94aa9564f74 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 65e68d82f34bb40ef3cfb397ecf5df0c83201151 Original-Change-Id: Ia2c31bbbfc020dc4fd71c72b877414adfdfc42a8 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/241423 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9662 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14tegra132: lock down VPRAaron Durbin
The GPU MMU won't function properly until it sees the VPR is locked down. Therefore, do the appropriate work. BUG=None BRANCH=None TEST=Built. Change-Id: I6011c75c1e6c231f2fa416e0057cb5805a88a2bb Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: ca9cc9917b98a148442468d1d1541a0408ab6c2c Original-Change-Id: I3601f419b561cee392391577ef8db66b9fbd8c1b Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/242910 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Reviewed-on: http://review.coreboot.org/9660 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-14rush: Enable dp displayJimmy Zhang
Add dp/sor supporting functions to enable dp panel. BUG=chrome-os-partner:34336 BRANCH=none TEST=build rush and ryu Change-Id: I1cc5a95ef5e3ea7cc701c1cb124a7eb5a5dbd872 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 795a7cddd36bd783cfdd6f1d3f7092bf48ebd8e7 Original-Change-Id: I336336dbbc5a772eec19ba96db8e7b50f6ea1497 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/238945 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9616 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14ryu: display: Add function to pass mode info to payloadJimmy Zhang
This change is intended for code sharing. BUG=chrome-os-partner:34336 BRANCH=none TEST=build ryu and rush Change-Id: Ib83106f1c2d83c1d98b38567626f3169f2aec626 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9f7414132aaaa6a98663852219e17acbe919d704 Original-Change-Id: Idedb0c16e33a630c954c04767592c3a75c49944b Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/238944 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9615 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14ryu: display: Set display shift clock dividerJimmy Zhang
Add and call display shift clock divider function to set shift clock divider. This change is also intended for code sharing on dc settings. BUG=chrome-os-partner:34336 BRANCH=none TEST=build ryu and rush Change-Id: I9ad1b32de50395720355bb2d00f5800c7f6c4b73 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 24a72fa3411652d54ae1f7d69db0a7293aad7877 Original-Change-Id: I01582c6863d31627ac93db9fddda93f4f78249cd Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/238943 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9614 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14rush: Configure display related clock, pad, and powerJimmy Zhang
BUG=chrome-os-partner:34336 BRANCH=none TEST=build rush Change-Id: I9c2235ccc5571f1919dc013c62488390fe31dcbc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7468c14842c680be81620ad3fd2ea9ae056d525f Original-Change-Id: Iaf7f70727fc914b9bb2d063c9a30ece4451d40da Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/238942 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9613 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14rush: devicetree: Define default dp panel parametersJimmy Zhang
DP panel parameters generally can be retrieved thru edid. The parameters specified here will be used when edid fetching failed. BUG=chrome-os-partner:34336 BRANCH=none TEST=build rush and ryu Change-Id: I39e25c873561f75394408f6635aaa2e88b67d846 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c02facb9753de08f66f3ae40d7dca1eba50febc5 Original-Change-Id: I4785eca3ec03b48e8780ebf02389e9b46317e96d Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/238941 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9612 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14rush: Add dp related parametersJimmy Zhang
Add these parameters so that they can be specified in devicetree. BUG=chrome-os-partner:34336 BRANCH=none TEST=build ryu and rush Change-Id: I77ee16263e1ce6a8c32b3cd203c1b8a499514a8e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c3b254936e696f81ca7eeeb7f6968a5350352b59 Original-Change-Id: Iba47afe95c3889047a82582730be7a253fae76e7 Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/238940 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9611 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14arm: Fix checkstack() to use correct stack sizeJulius Werner
checkstack() runs at the end of ramstage to warn about stack overflows, and it assumes that CONFIG_STACK_SIZE is always the size of the stack to check. This is only true for systems that bring up multiprocessing in ramstage and assign a separate stack for each core, like x86 and ARM64. Other architectures like ARM and MIPS (for now) don't touch secondary CPUs at all and currently don't look like they'll ever need to, so they generally stay on the same (SRAM-based) stack they have been on since their bootblock. This patch tries to model that difference by making these architectures explicitly set CONFIG_STACK_SIZE to zero, and using that as a cue to assume the whole (_estack - _stack) area in checkstack() instead. Also adds a BUG() to the stack overflow check, since that is currently just as non-fatal as the BIOS_ERR message (despite the incorrect "SYSTEM HALTED" output) but a little more easy to spot. Such a serious failure should not drown out in all the normal random pieces of lower case boot spam (also, I was intending to eventually have a look at assert() and BUG() to hopefully make them a little more useful/noticeable if I ever find the time for it). BRANCH=None BUG=None TEST=Booted Pinky, noticed it no longer complains about stack overflows. Built Falco, Ryu and Urara. Change-Id: I6826e0ec24201d4d83c5929b281828917bc9abf4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 54229a725e8907b84a105c04ecea33b8f9b91dd4 Original-Change-Id: I49f70bb7ad192bd1c48e077802085dc5ecbfd58b Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/235894 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9610 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14rk3288: Fix memlayout to allow a little more bootblock spaceJulius Werner
Freeing up memory on rk3288 is like squeezing water out of a stone right now, but I still managed to get a few drops here and there. Let's hope this will be enough. BRANCH=None BUG=None TEST=Pinky builds and boots again. memsz is ~15K in bootblock and ~39K in verstage. Change-Id: Icf7ff3369bf367426a34f1490e0a041ae9bd6367 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9a3737ab535cdef228a1607433860f881db04412 Original-Change-Id: I90d9eab5b5d3af7a2e4b836a9c7b735b7c1c48e6 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/235870 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9609 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14timestamps: You can never have enough of them!Julius Werner
Now that we have timestamps in pre-RAM stages, let's actually make use of them. This patch adds several timestamps to both the bootblock and especially the verstage to allow more fine-grained boot time tracking. Some of the introduced timestamps can appear more than once per boot. This doesn't seem to be a problem for both coreboot and the cbmem utility, and the context makes it clear which operation was timestamped at what point. Also simplifies cbmem's timestamp printing routine a bit, fixing a display bug when a timestamp had a section of exactly ",000," in it (e.g. 1,000,185). BRANCH=None BUG=None TEST=Booted Pinky, Blaze and Falco, confirmed that all timestamps show up and contained sane values. Booted Storm (no timestamps here since it doesn't support pre-RAM timestamps yet). Change-Id: I7f4d6aba3ebe3db0d003c7bcb2954431b74961b3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7a2ce81722aba85beefcc6c81f9908422b8da8fa Original-Change-Id: I5979bfa9445a9e0aba98ffdf8006c21096743456 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234063 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9608 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14rk3288: Add CBMEM console support and fix RETURN_FROM_VERSTAGEJulius Werner
Since we can now reduce our vboot2 work buffer by 4K, we can use all that hard-earned space for the CBMEM console instead (and 4K are unfortunately barely enough for all the stuff we dump with vboot2). Also add console_init() and exception_init() to the verstage for CONFIG_RETURN_FROM_VERSTAGE, which was overlooked before (our model requires those functions to be called again at the beginning of every stage... even though some consoles like UARTs might not need it, others like the CBMEM console do). In the !RETURN_FROM_VERSTAGE case, this is expected to be done by the platform-specific verstage entry wrapper, and already in place for the only implementation we have for now (tegra124). (Technically, there is still a bug in the case where EARLY_CONSOLE is set but BOOTBLOCK_CONSOLE isn't, since both verstage and romstage would run init_console_ptr() as if they were there first, so the romstage overwrites the verstage's output. I don't think it's worth fixing that now, since EARLY_CONSOLE && !BOOTBLOCK_CONSOLE is a pretty pointless use-case and I think we should probably just get rid of the CONFIG_BOOTBLOCK_CONSOLE option eventually.) BRANCH=None BUG=None TEST=Booted Pinky. Change-Id: I87914df3c72f0262eb89f337454009377a985497 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 85486928abf364c5d5d1cf69f7668005ddac023c Original-Change-Id: Id666cb7a194d32cfe688861ab17c5e908bc7760d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/232614 Reviewed-on: http://review.coreboot.org/9607 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14timer: Reestablish init_timer(), consolidate timer initialization callsJulius Werner
We have known for a while that the old x86 model of calling init_timer() in ramstage doesn't make sense on other archs (and is questionable in general), and finally removed it with CL:219719. However, now timer initialization is completely buried in the platform code, and it's hard to ensure it is done in time to set up timestamps. For three out of four non-x86 SoC vendors we have brought up for now, the timers need some kind of SoC-specific initialization. This patch reintroduces init_timer() as a weak function that can be overridden by platform code. The call in ramstage is restricted to x86 (and should probably eventually be removed from there as well), and other archs should call them at the earliest reasonable point in their bootblock. (Only changing arm for now since arm64 and mips bootblocks are still in very early state and should sync up to features in arm once their requirements are better understood.) This allows us to move timestamp_init() into arch code, so that we can rely on timestamps being available at a well-defined point and initialize our base value as early as possible. (Platforms who know that their timers start at zero can still safely call timestamp_init(0) again from platform code.) BRANCH=None BUG=None TEST=Booted Pinky, Blaze and Storm, compiled Daisy and Pit. Change-Id: I1b064ba3831c0c5b7965b1d88a6f4a590789c891 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ffaebcd3785c4ce998ac1536e9fdd46ce3f52bfa Original-Change-Id: Iece1614b7442d4fa9ca981010e1c8497bdea308d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234062 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9606 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14CBFS: Automate ROM image layout and remove hardcoded offsetsJulius Werner
Non-x86 boards currently need to hardcode the position of their CBFS master header in a Kconfig. This is very brittle because it is usually put in between the bootblock and the first CBFS entry, without any checks to guarantee that it won't overlap either of those. It is not fun to debug random failures that move and disappear with tiny alignment changes because someone decided to write "ORBC1112" over some part of your data section (in a way that is not visible in the symbolized .elf binaries, only in the final image). This patch seeks to prevent those issues and reduce the need for manual configuration by making the image layout a completely automated part of cbfstool. Since automated placement of the CBFS header means we can no longer hardcode its position into coreboot, this patch takes the existing x86 solution of placing a pointer to the header at the very end of the CBFS-managed section of the ROM and generalizes it to all architectures. This is now even possible with the read-only/read-write split in ChromeOS, since coreboot knows how large that section is from the CBFS_SIZE Kconfig (which is by default equal to ROM_SIZE, but can be changed on systems that place other data next to coreboot/CBFS in ROM). Also adds a feature to cbfstool that makes the -B (bootblock file name) argument on image creation optional, since we have recently found valid use cases for CBFS images that are not the first boot medium of the device (instead opened by an earlier bootloader that can already interpret CBFS) and therefore don't really need a bootblock. BRANCH=None BUG=None TEST=Built and booted on Veyron_Pinky, Nyan_Blaze and Falco. Change-Id: Ib715bb8db258e602991b34f994750a2d3e2d5adf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e9879c0fbd57f105254c54bacb3e592acdcad35c Original-Change-Id: Ifcc755326832755cfbccd6f0a12104cba28a20af Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229975 Reviewed-on: http://review.coreboot.org/9620 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14CBFS: Correct ROM_SIZE for ARM boards, use CBFS_SIZE for cbfstoolJulius Werner
Some projects (like ChromeOS) put more content than described by CBFS onto their image. For top-aligned images (read: x86), this has traditionally been achieved with a CBFS_SIZE Kconfig (which denotes the area actually managed by CBFS, as opposed to ROM_SIZE) that is used to calculate the CBFS entry start offset. On bottom-aligned boards, many define a fake (smaller) ROM_SIZE for only the CBFS part, which is not consistently done and can be an issue because ROM_SIZE is expected to be a power of two. This patch changes all non-x86 boards to describe their actual (physical) ROM size via one of the BOARD_ROMSIZE_KB_xxx options as a mainboard Kconfig select (which is the correct place to declare unchangeable physical properties of the board). It also changes the cbfstool create invocation to use CBFS_SIZE as the -s parameter for those architectures, which defaults to ROM_SIZE but gets overridden for special use cases like ChromeOS. This has the advantage that cbfstool has a consistent idea of where the area it is responsible for ends, which offers better bounds-checking and is needed for a subsequent fix. Also change the FMAP offset to default to right behind the (now consistently known) CBFS region for non-x86 boards, which has emerged as a de-facto standard on those architectures and allows us to reduce the amount of custom configuration. In the future, the nightmare that is ChromeOS's image build system could be redesigned to enforce this automatically, and also confirm that it doesn't overwrite any space used by CBFS (which is now consistently defined as the file size of coreboot.rom on non-x86). CQ-DEPEND=CL:231576,CL:231475 BRANCH=None BUG=chromium:422501 TEST=Built and booted on Veyron_Pinky. Change-Id: I89aa5b30e25679e074d4cb5eee4c08178892ada6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e707c67c69599274b890d0686522880aa2e16d71 Original-Change-Id: I4fce5a56a8d72f4c4dd3a08c129025f1565351cc Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229974 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9619 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14chromeec: Fix printf formatting warningAnatol Pomozov
src/ec/google/chromeec/ec_lpc.c: In function ‘google_chromeec_command_v3’: src/ec/google/chromeec/ec_lpc.c:88:3: error: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘unsigned int’ [-Werror=format=] printk(BIOS_ERR, "EC cannot send %ld bytes\n", ^ cc1: all warnings being treated as errors Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Change-Id: I0d47350f00102a959d54a64b8f932099fc13f886 Reviewed-on: http://review.coreboot.org/9558 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14storm: add ipq8064 blobs to the CBFSVadim Bendebury
Files necessary for the SOC bringup are added to the CBFS as raw blobs. Ipq8064 specific MBN header will allow to determine were the blobs should be loaded and what start address should be used. BRANCH=storm BUG=chrome-os-partner:34161 TEST=build storm firmware and verify that the right components are added: $ emerge-storm coreboot chromeos-bootimage $ cbfstool /build/storm/firmware/image.bin print image.bin: 8192 kB, bootblocksize 32488, romsize 2883584, offset 0x7f40 alignment: 64 bytes, architecture: arm Name Offset Type Size cdt.mbn 0x7f40 raw 376 ddr.mbn 0x8100 raw 25820 rpm.mbn 0xe640 raw 78512 tz.mbn 0x21940 raw 85360 fallback/verstage 0x36700 stage 39500 fallback/romstage 0x401c0 stage 15652 fallback/ramstage 0x43f40 stage 24328 config 0x49e80 raw 2701 fallback/payload 0x4a940 payload 65592 u-boot.dtb 0x5a9c0 (unknown) 2922 (empty) 0x5b580 null 2509336 $ Change-Id: I967cd20364c90a1ef7add959621992c2356f158d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 6b5238d47da417b8b1993ad3348f4c32381cd0e4 Original-Change-Id: Id642ae68ef07750624f85b31ad891752d8af99bf Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/233672 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9577 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-14ipq8064: use the new utility to build bootblockVadim Bendebury
The first blob in the Storm bootimage is a concatenation of the Uber-sbl produced by the qca-firmware ebuild and the coreboot bootblock. The new tool is used to add the bootblock to uber-sbl and update the size values in the combined header. BRANCH=storm BUG=chrome-os-partner:34161 TEST=no execution tests yet, the build succeeds. Change-Id: I4f1fe8a97ffab04eee4f82bc43e6f5406dd9bb42 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: a126a62f65a568d62fe35bdcf27eaec38fd1a997 Original-Change-Id: Iec3c1e943f1f9ee5ca20320a6365fc4aa5516e38 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/232310 Original-Reviewed-by: Manoj Juneja <mjuneja@qti.qualcomm.com> Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9573 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-13ti/am335x: switch to generic udelayPatrick Georgi
Change-Id: Iac1ddbb95768dea98917211aa995f4111bf82647 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9617 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-13arch/mips: provide proper cache primitivesIonela Voinescu
This provides the opportunity to remove the kludge of disabling caches altogether in the bootblock. [pg: originally, this commit also provided automatic cache management after loading stages, ie. flush dcache, so code ends up in icache. This is done differently in upstream, so it's left out here] BUG=chrome-os-partner:34127, chrome-os-partner:31438 TEST=with this fix romstage, ramstage and payload are executed properly BRANCH=none Change-Id: I568c68d02b2cd9c1c2c9c1495ba3343c82509ccc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 95ab0f159cabf21fc100f371d451211e7d113761 Original-Change-Id: Iaf90b052073dd355ab9114e8dba9f5ef76188c94 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/232410 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9618 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-13broadwell: Work around VBIOS framebuffer issueDuncan Laurie
The first 64 bytes of the framebuffer contain garbage after running the option rom and after calling the VBE mode set with the flag to clear the framebuffer. Work around this issue by clearing the first 64 bytes in the framebuffer in the broadwell graphics setup code after it executes the VBIOS. BUG=chrome-os-partner:32771 BRANCH=samus,auron TEST=build and boot on samus in dev mode, check for graphical corruption Change-Id: I0381e32a5ea17e13c4ed598835999c12136418cf Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: f29c1b0b7c100cf290f82de671042823032f71c9 Original-Change-Id: I072bc913f7daea16e4861a7549e1b4ec85cde4cd Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/222676 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9464 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-04-13rk3288/exynos5250/exynos5420: Consolidate timer filesJulius Werner
Some boards spread their timer implementation out in multiple files with one function each for no discernable reason. Let's clean that up to make things a little simpler to find. BRANCH=None BUG=None TEST=Booted Pinky, compiled Daisy and Pit. Change-Id: I8b543d1a0d9af37bde5433b0c9271d687b2404b2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 887765e1bd88d7aa49ad9a5e98b8831c10da6c10 Original-Change-Id: I43d29cd1b4a1d89cfd40f6cba5ca99ada3b00f82 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234061 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9601 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-13rk3288: Increase PD_BUS_ACLK (SRAM clock) to improve boot speedJulius Werner
This patch doubles the ACLK peripheral clock for the PD_BUS power domain to 297MHz, which is the closest to the maximum of 300MHz we can reach by dividing GPLL. This frequency directly translates into SRAM speed, so maximizing it has a huge impact on boot speed (especially with the lack of SRAM caching). BUG=chrome-os-partner:32987 TEST=Booted Veyron_Pinky. Hacked timestamps into vboot and confirmed that the (visibly) long signature verification times are nearly halved. Change-Id: Iafa3044854a4058a7f885c775119d964a6295de4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c230585f4344d0eab4f8eeaa761869965f2da08a Original-Change-Id: I3f19eaa3d97dcc6235d820c71eb5edf2ae87d647 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/224524 Original-Trybot-Ready: Doug Anderson <dianders@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/9600 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13storm: Fix timer init order problemJulius Werner
Commit 257aaee9e3a (arm: Add bootblock_mainboard_early_init() for pre-console initialization) inadvertently moved the timer initialization after console initialization for IPQ806x, which is apparently not a good idea for this platform. This patch solves the issue by moving init_timer() to bootblock_mainboard_early_init(), which is the new hook explicitly provided to perform pre-console tasks. BRANCH=None BUG=None TEST=Built and booted Storm with 257aaee9e reverted. Noticed that it was already broken. Bisected coreboot and tracked down breakage to commit a126a62f (ipq8064: use the new utility to build bootblock). Built and booted successfully with this patch and a revert of a126a62f to confirm that the bug in question here is fixed. Change-Id: I4a3faa2aec8ff1fbbe6c389f1d048475aa944418 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 752d1f879f9bd841f18bd84842491f747458cf52 Original-Change-Id: Ie4aa2d06cb6fda6d5ff8dd5ea052257fb7b8a24b Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/233290 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9574 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13ipq806x: copy i2c, qup, and gsbi drivers from depthchargeDaisuke Nojiri
this is a preparation for porting these drivers to coreboot. the code will be modified by the following patches. BUG=chrome-os-partner:33647 BRANCH=ToT TEST=None Change-Id: I2baeed5b6130ace2515d6e28115f8d1008004976 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 7c03a186a599be9d274c6fcdea1906529cc117d7 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: I9f3428ef02d2ba15ae63c99b10fe0605dd595313 Original-Reviewed-on: https://chromium-review.googlesource.com/231461 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9582 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13storm: add hard_reset templateDaisuke Nojiri
this is required to do early firmware selection using vboot2. actual implementation can be done later. BUG=chrome-os-partner:33755 BRANCH=ToT TEST=Booted storm. Change-Id: I8e9e168ea6fa3af149d5ad4ca51c5c9bba4d986d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 611c24773478c8c212d567bb4f2cb9a09898ddc8 Original-Change-Id: Idd1a1de4991a19902ffe45f01be89d47f4413779 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229425 Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9581 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13mips: disable caches in bootblock startup codeVadim Bendebury
Until proper MIPS cache management is available it is necessary to disable data and instruction caches, otherwise code placed in memory stays in data cache and is not available for instruction fetched. BRANCH=none BUG=chrome-os-partner:31438,chrome-os-partner:34127 TEST=coreboot loading rombase and rambase now succeeds. Change-Id: I4147e1325edc0b9bb951cd7ce18d5f104f3eaec0 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: 93d5bfa1d01fbbabbabef33a22287ceeea28b15b Original-Change-Id: Ib195ed6e5f08ccaa6bbe3325c2199171bfb63b88 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/232191 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9569 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-13tpm: Only expose base address Kconfig option when enabledPatrick Georgi
Change-Id: Ia8ddd689a3bf09ed68f94907ea19d4d2ee874542 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/9594 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-13rk3288: Move UART initialization to bootblock_mainboard_early_init()Julius Werner
This patch uses the new bootblock_mainboard_early_init() hook to run the UART pinmuxing on rk3288-based boards before initializing the console. This allows us to get rid of the hacky second console_init() call in bootblock_soc_init(). We can also simplify the pinmux selection a bit since we know that a given board always uses the same UART (still keep an assert around to be sure, though). BRANCH=None BUG=chrome-os-partner:32123 TEST=Booted on Pinky. Change-Id: I3da8b0e4bd609f33cedd934ce51cb20b1190024b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: caabda8fc1ddb4805d86fd9a0d5d2f3cf738bfaf Original-Change-Id: Ia56c0599a15f966d087ca39181bfe23abd262e72 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/231942 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9604 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-13arm: Add bootblock_mainboard_early_init() for pre-console initializationJulius Werner
On most platforms, enabling the console and exception handlers are amongst the very first things you want to do, as they help you see what's going on and debug errors in other early init code. However, most ARM boards require some small amount of board-specific initialization (pinmuxing, maybe clocks) to get the UART running, which is why bootblock_mainboard_init() (and with it almost all of the actual bootblock code) always had to run before console initialization for now. This patch introduces an explicit bootblock_mainboard_early_init() hook for only that part of initialization that absolutely needs to run before console output. The other two hooks for SoC and mainboard are moved below console_init(). This model has already proven its worth before in the tegra124 and tegra132 custom bootblocks. BRANCH=None BUG=chrome-os-partner:32123 TEST=Booted on Pinky. Compiled for Daisy, Storm and Ryu. Change-Id: I510c58189faf0c08c740bcc3b5a654f81f892464 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f58e84a2fc1c9951e9c4c65cdec1dbeb6a20d597 Original-Change-Id: I4257b5a8807595140e8c973ca04e68ea8630bf9a Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/231941 Reviewed-on: http://review.coreboot.org/9603 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 09:41:43 +0000