summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2013-04-11Snow: Set up the ChromeOS GPIOs as inputs during the ROM stage.Gabe Black
We need these to be inputs so they can be read when populating the coreboot tables. It seems like a good idea to do this early to ensure that the input gate capacitance has had a chance to charge, and if we decide to use actually use that information during the ROM stage to do earlier RW firmware selection. It is not guarded by a ChromeOS config variable because those lines are always intended to be input GPIOs, regardless of whether we're running ChromeOS or not. Change-Id: Id76008931b5081253737c6676980a1bdb476ac09 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3067 Tested-by: build bot (Jenkins)
2013-04-11Snow: Fix the recovery GPIO polarity, and lid GPIO polarity and number.Gabe Black
Change-Id: I34097f878291367b28962048190e11ccaacfc514 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3066 Tested-by: build bot (Jenkins)
2013-04-11ARM: Unmask aborts very early in the bootblock.Gabe Black
It's better to recognize aborts when they occur than to mask them to discover them later without knowing where they actually came from. Change-Id: Ic8f5321415f411afac94b5ef9dd440790df6d82c Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3065 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-04-11ASRock DSDT: Split the ASRock DSDTMike Loptien
This is the same split as was done on the Persimmon. Change-Id: I25bd63f23417b7926232f07eaaa7917170af9d60 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/3050 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-11Exynos5250: Use new chip settings for the cpuRonald G. Minnich
Properly use the chip settings when configuring the CPU, at this point being purely graphics. Change-Id: I9bc2d32c1037653837937b314e4041abc0024835 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3054 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-04-10siemens/sitemp_g1p1: Make ACPI report the right mmconf regionPatrick Georgi
ACPI reported the entire space between top-of-memory and some (relatively) arbitrary limit as useful for MMIO. Unfortunately the HyperTransport configuration disagreed. Make them match up. Other boards are not affected since they don't report any region for that purpose at all (it seems). Change-Id: I432a679481fd1c271f14ecd6fe74f0b7a15a698e Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3047 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-10GOOGLE/SNOW: add edp support to ramstageRonald G. Minnich
Add basic edp support to the ramstage. Not working. Change-Id: I15086e03417edca7426c214e67b51719d8ed9341 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3055 Tested-by: build bot (Jenkins)
2013-04-10[2/2] tps65090: re-factor for corebootDavid Hendricks
This does basic re-factoring to fit the driver into coreboot. Change-Id: Id5f8c12a73ec37ddd545d50b3e8e9b3012657db1 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3061 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-10[1/2] initial import of TI TPS65090David Hendricks
This imports TPS65090 PMIC from u-boot and adds/updates Makefiles and Kconfig files. The follow-up patch will re-factor the code. Change-Id: Ic9e43b9665ddf7f55feae8fa17fbf3d2d5f4756d Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3060 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-10GOOGLE/SNOW: clean up the device treeRonald G. Minnich
This is a simpler device tree that is also more correct, and has graphics settings as well. Change-Id: I342d8be7dddb76e6992876c73f5c625c926977d3 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3053 Tested-by: build bot (Jenkins)
2013-04-10exynos5-common: Enable fimd_bypass and minor cleanupRonald G. Minnich
Basic cleanup, this code still does not work. Change-Id: I84ed9f08fd04cd8eb74cd860e0775d8c602f42d6 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3049 Tested-by: build bot (Jenkins)
2013-04-10armv7: replace read/write macros with inlinesDavid Hendricks
This enables type checking for safety as to help prevent errors like http://review.coreboot.org/#/c/3038/ . Now compilation fails if the wrong type is passed into readb/readw/readl/writeb/writew/writel or other macros in io.h. This also deprecates readw/writew. The previous definition was 16-bits which is incorrect since wordsize on ARMv7 is 32-bits and there was only 1 instance of writew (#if 0'd anyway). Going forward we should always use read{8,16,32} and write{8,16,32} where N specifies the exact length rather than relying on ambiguous definition of wordsize. Since many macros relied on __raw_*, which were basically the same (minus data memory barrier instructions), this patch also gets rid of __raw_*. There were parts of the code which ended up using these macros consecutively, for example: setbits_le32(&regs->ch_cfg, SPI_CH_RST); clrbits_le32(&regs->ch_cfg, SPI_CH_RST); In such cases the safe versions of readl() and writel() should be used anyway. Note: This also fixes two dubious casts as to avoid breaking compilation. Change-Id: I8850933f68ea3a9b615d00ebd422f7c242268f1c Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3045 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-10exynos5: Re-factor I2C codeDavid Hendricks
This re-factors the Exynos5 I2C code to be simpler and use the new API, and updates users accordingly. - i2c_read() and i2c_write() functions updated to take bus number as an argument. - Get rid of the EEPROM_ADDR_OVERFLOW stuff in i2c_read() and i2c_write(). If a chip needs special handling we should take care of it elsewhere, not in every low-level i2c driver. - All the confusing bus config functions eliminated. No more i2c_set_early_config() or i2c_set_bus() or i2c_get_bus(). All this is handled automatically when the caller does a transaction and specifies the desired bus number. - i2c_probe() eliminated. We're not a command-line utility. - Let the compiler place static variables automatically. We don't need any of this fancy manual data placement. - Remove dead code while we're at it. This stuff was ported early on and much of it was left commented out in case we needed it. Some also includes nested macros which caused gcc to complain. - Clean up #includes (no more common.h, woohoo!), replace debug() with printk(). Change-Id: I8e1f974ea4c6c7db9f33b77bbc4fb16008ed0d2a Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3044 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-09replace device/i2c.h with simpler versionDavid Hendricks
The existing header was imported along with the Exynos code and left mostly unchanged. This is the first patch in a series intended to replace the imported u-boot I2C API with a much simpler and cleaner interface: - We only need to expose i2c_read() and i2c_write() in our public API. Everything else is board/chip-dependent and should remain hidden away. - i2c_read and i2c_write functions will take bus number as an arg and we'll eliminate i2c_get_bus and i2c_set_bus. Those are prone to error and end up cluttering the code since the user needs to save the old bus number, set the new one, do the read/write, and restore the old value (3 added steps to do a simple transaction). - Stop setting default values for board-specific things like SPD and RTC bus numbers (as if we always have an SPD or RTC on I2C). - Death to all the trivial inline wrappers. And in case there was any doubt, we really don't care about the MPC8xx. Though if we did then we would not pollute the public API with its idiosyncrasies. Change-Id: I4410a3c82ed5a6b2e80e3d8c0163464a9ca7c3b0 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3043 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-09FrontRunner/Toucan-AF: boards will be renamed to fit ADLINK schemeJens Rottmann
Originally developed by LiPPERT and after the acquisition marketed as 'LiPPERT by ADLINK', the plan is now to streamline both boards into the ADLINK naming scheme. But AFAIK a few have already been sold and as of this writing the website still advertises the old names. And in any case the veteran LX products will continue to be sold by ADLINK under their original names. So create CONFIG_VENDOR_ADLINK, currently only telling users to look under LiPPERT (however any future boards will be added here). Further add an explanation to CONFIG_VENDOR_LIPPERT, and in the Mainboard model selection show both names. Change-Id: Iaafa88533ef4cce33243293c3d55754e7e93d003 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/3046 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08Fix read_option invocation in uart8250mem.cStefan Reinauer
read_option was unified between ramstage and romstage a while ago. However, it seems some invocations were not fixed accordingly. This patch switches uart8250mem.c to use the new scheme. Change-Id: I03cef4f6ee9188a6412c61d7ed34fbaff808a32b Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3033 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08Fix compilation when coverage debugging is enabledStefan Reinauer
With CONFIG_DEBUG_COVERAGE enabled, the build currently fails with src/lib/gcov-glue.c: In function 'fseek': src/lib/gcov-glue.c:87:2: error: format '%d' expects argument of type 'int', but argument 4 has type 'long int' [-Werror=format] src/lib/gcov-glue.c:87:2: error: format '%d' expects argument of type 'int', but argument 4 has type 'long int' [-Werror=format] Change-Id: Iddaa601748c210d9dad06ae9dab2a3deaa635b2c Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3032 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08armv7: specify condition code for msr instructionDavid Hendricks
This adds condition codes when using the msr instruction. Although described as "optional" in the Cortex-A series programmer's guide, our experience with using the msr instruction in the payload suggests that the condition code is not optional and that this only worked in coreboot (and u-boot) because the processor comes up in SVC32 mode. (credit to Gabe Black for finding this, I'm only uploading the patch) Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I0aa4715ae415e1ccc5719b7b55adcd527cc1597b Reviewed-on: http://review.coreboot.org/3037 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08exynos5250: add missing address-of operator in UART driverDavid Hendricks
This adds a missing address-of operator. This was a subtle bug that didn't seem to cause problems at first since the serial console appeared to work. However it caused an imprecise external abort which became apparent later on when aborts were unmasked in the kernel via the CPSR_A bit. (credit goes to Gabe Black for finding this) Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I80a33b147d92d559fa8fefbe7d5642235deb9aea Reviewed-on: http://review.coreboot.org/3038 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08snow/exynos5250: move board-specific power stuff to mainboard dirDavid Hendricks
This moves highly board-specific code out from the Exynos5250 power_init() into Snow's romstage.c. There's no reason the CPU- specific code should care about which PMIC we are using and which bus it is on. Change-Id: I52313177395519cddcab11225fc23d5e50c4c4e3 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3034 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-06exynos5250: add a chip.h file for the display register settingsRonald G. Minnich
Display hardware is part of this SOC, and we need to be able to set certain variables in devicetree.cb. This chip file contains the initial things we think we need to set. Change-Id: I16f2d4228c87116dbeb53a3c9f3f359a6444f552 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3031 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-04-05mtrr: add rom caching comment about hyperthreadsAaron Durbin
Explicitly call out the effects of hyperthreads running the MTRR code and its impact on the enablement of ROM caching. Change-Id: I14b8f3fdc112340b8f483f2e554c5680576a8a7c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3018 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-05exynos5-common: get rid of displayport trial codeRonald G. Minnich
This was a first pass at display port support, we have realized that it was ultimately a bad path. The display hardware is intimately tied into a specific cpu and mainboard combination, and the code has to be elsewhere. The devicetree formatting is ugly, but it matters not: it's changing soon. Change-Id: Iddce54f9e7219a7569315565fac65afbbe0edd29 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3029 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-04AMD: Drop six copies of wrmsr_amd and rdmsr_amdKyösti Mälkki
Based on comments in cpu/x86/msr.h for wrmsr/rdmsr, and for symmetry, I have added __attribute__((always_inline)) for these. Change-Id: Ia0a34c15241f9fbc8c78763386028ddcbe6690b1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/2898 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-04-04AMD GX1: Remove useless copied header file `northbridge.h`Paul Menzel
This was there since the beginning commit d24d6993b6d7bcf7977d74d081e718e1b076d1b0 Author: arch import user (historical) <svn@openbios.org> Date: Wed Jul 6 17:06:46 2005 +0000 Revision: linuxbios@linuxbios.org--devel/freebios--devel--2.0--patch-26 Creator: Hamish Guthrie <hamish@prodigi.ch> Added AMD GX1 northbridge and cs5530 Southbridge but blindly copied from Intel 440 BX and is not used anywhere. Thanks to Idwer Vollering for spotting this. Change-Id: I38b3d3feb25966c3aa382994d323e59c3f3c9e6c Reported-by: Idwer Vollering Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3020 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2013-04-03lynxpoint: Cosmetic cleanupStefan Reinauer
src/southbridge/intel/lynxpoint/pmutil.c was committed with two things that needed fixing. Change-Id: Ib83343a75840aa29847b607b0275971eb8140f12 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3003 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-04-03Partially revert "AMD Inagua: broadcom.c: Add missing prototype for ↵Jens Rottmann
`broadcom_init()`" Commit 5d741567 added a prototype to broadcom.c to fix a warning. This part is fine. It also changed mainboard.c to #include broadcom.c. But broadcom.c is already in Makefile.inc, now building will fail because the linker gets broadcom_init() twice. Undo the change to mainboard.c but keep the change to broadcom.c. Change-Id: Ieccc098f477ffacccf4174056998034a220a9744 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/3012 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-04-03sandybridge: enable ROM cachingAaron Durbin
If ROM caching is selected the sandybridge chipset code will will enable ROM caching after all other CPU threads are brought up. Change-Id: I3a57ba8753678146527ebf9547f5fbbd4f441f43 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3017 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-03haswell: enable ROM cachingAaron Durbin
If ROM caching is selected the haswell CPU initialization code will enable ROM caching after all other CPU threads are brought up. Change-Id: I75424bb75174bfeca001468c3272e6375e925122 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3016 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-03haswell: keep ROM cache enabledAaron Durbin
The MP code on haswell was mirroring the BSPs MTRRs. In addition it was cleaning up the ROM cache so that the MTRR register values were the same once the OS was booted. Since the hyperthread sibling of the BSP was going through this path the ROM cache was getting torn down once the hyperthread was brought up. That said, there was no differnce in observed boot time keeping the ROM cache enabled. Change-Id: I2a59988fcfeea9291202c961636ea761c2538837 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3008 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-03haswell: use new interface to disable rom cachingAaron Durbin
The haswell code was using the old assumption of which MTRR was used for the ROM cache. Now that there is an API for doing this use it as the old assumption is no longer valid. Change-Id: I59ef897becfc9834d36d28840da6dc4f1145b0c7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3007 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-03intel/microcode.h: Fix typo in comment: micr*o*codePaul Menzel
Introduced in commit »intel microcode: split up microcode loading stages« (98ffb426) [1]. [1] http://review.coreboot.org/2778 Change-Id: I626508b10f3998b43aaabd49853090b36f5d3eb0 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2992 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-04-03Add PXE ROM selection to Kconfig menuSiyuan Wang
Adding a pxe rom manually is inconvenient. With this patch, PXE ROM can be added automatically by selecting PXE_ROM in Kconfig. I have tested this patch on AMD Parmer and Thatcher with iPXE. iPXE would be a boot device in Seabios when pressing F12. iPXE works well with coreboot and Seabios. Change-Id: I2c4fc73fd9ae6c979f0af2290d410935f600e2c8 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3013 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-03ASRock E350M1: Kconfig: Remove `WARNINGS_ARE_ERRORS` to treat warnings as errorsPaul Menzel
Now that the ASRock E350M1 builds without any warnings, remove the config option `WARNINGS_ARE_ERRORS` set to no by default from the file `Kconfig` so warnings are treated as errors to prevent code from being added in the future introducing warnings. Change-Id: Idfecfb1434158969334a4b37972b5fc6fd76e72a Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3014 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-04-02ASRock E350M1: buildOpts.c: Add missing memory related definesPaul Menzel
When building the ASRock E350M1, the following warnings are shown. $ make # on Jenkins (build server) […] CC mainboard/asrock/e350m1/buildOpts.romstage.o In file included from src/mainboard/asrock/e350m1/buildOpts.c:294:0: src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h:2071:6: warning: "DDR1333_FREQUENCY" is not defined [-Wundef] src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h:2071:40: warning: "DDR1866_FREQUENCY" is not defined [-Wundef] src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h:2089:5: warning: "TIMING_MODE_AUTO" is not defined [-Wundef] src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h:2089:31: warning: "TIMING_MODE_SPECIFIC" is not defined [-Wundef] src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h:2113:5: warning: "QUADRANK_UNBUFFERED" is not defined [-Wundef] src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h:2113:33: warning: "QUADRANK_UNBUFFERED" is not defined [-Wundef] src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h:2127:5: warning: "POWER_DOWN_BY_CHIP_SELECT" is not defined [-Wundef] src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h:2127:28: warning: "POWER_DOWN_BY_CHIP_SELECT" is not defined [-Wundef] […] Adding the corresponding defines as done for AMD Persimmon in commit d7a696d0f229abccc95ff411f28d91b9b796ab74 Author: efdesign98 <efdesign98@gmail.com> Date: Thu Sep 15 15:24:26 2011 -0600 Persimmon updates for AMD F14 rev C0 Reviewed-on: http://review.coreboot.org/137 addresses the warnings. Change-Id: Id311b2dacdba5f2e6b4d834e43db0310213a35f9 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2962 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-04-01lynxpoint: Move ACPI NVS into separate CBMEM tableDuncan Laurie
The ACPI NVS region was setup in place and there was a CBMEM table that pointed to it. In order to be able to use NVS earlier the CBMEM region is allocated for NVS itself during the LPC device init and the ACPI tables point to it in CBMEM. The current cbmem region is renamed to ACPI_GNVS_PTR to indicate that it is really a pointer to the GNVS and does not actually contain the GNVS. Change-Id: I31ace432411c7f825d86ca75c63dd79cd658e891 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2970 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01boot: add disable_cache_rom() functionAaron Durbin
On certain architectures such as x86 the bootstrap processor does most of the work. When CACHE_ROM is employed it's appropriate to ensure that the caching enablement of the ROM is disabled so that the caching settings are symmetric before booting the payload or OS. Tested this on an x86 machine that turned on ROM caching. Linux did not complain about asymmetric MTRR settings nor did the ROM show up as cached in the MTRR settings. Change-Id: Ia32ff9fdb1608667a0e9a5f23b9c8af27d589047 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2980 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01lynxpoint: Basic configuration of SerialIO devicesDuncan Laurie
This adds configuration of SerialIO devices in the Lynxpoint-LP chipset. This includes DMA, I2C, SPI, UART, and SDIO controllers. There is assorted magic setup necessary for the devices and while it is similar for each device there are subtle differences in some register settings. These devices must be put into "ACPI Mode" in order to take advantage of S0ix. When in ACPI mode the allocated PCI BARs must be passed to ACPI so it can be relayed to the OS. When the devices are in ACPI mode BAR0+BAR1 is saved into ACPI NVS and then updated and returned when the OS calls _CRS. Note that is is not entirely complete yet. We need to update the IASL compiler in our build environment to support ACPI 5.0 in order to be able to pass the FixedDMA entries to the kernel. There are also no ACPI methods defined yet to do D0->D3->D0 transitions for actually entering/exiting S0ix states. This is hard to test right now because our kernel does not support any of these devices in ACPI mode. I was able to build and test the upstream bleeding-edge branch of the linux-pm git tree. With that tree I was able to enumerate and load the driver for the DesignWare I2C driver and attempt to probe the I2C bus -- although there are no devices attatched. I am also able to see the resources from ACPI in /proc/iomem get reserved properly in the kernel. Change-Id: Ie311addd6a25f3b7edf3388fe68c1cd691a0a500 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2971 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01wtm2: Enable SerialIO devices in ACPI modeDuncan Laurie
This enables all of the SerialIO devices and sets the flag to put them in ACPI mode. Change-Id: I7436c47d26028e95bbefafc320854c7cc34a4d44 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2972 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01lynxpoint: Fix LP clock gating setup for LPCDuncan Laurie
This bit offset is incorrect and should only be set based on another bit in a different register. Change-Id: I6037534236e3a4a5d15e15011ed9b5040b435eaf Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2973 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01Minor Kconfig help text fixStefan Tauner
I did not check what was once after the 'and'. Change-Id: I9f3f725bec281a94abdb2eeb692a96fecdebcc0c Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/2999 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01chromeos: honor MOCK_TPM=1Aaron Durbin
The TPM code wasn't previously honoring MOCK_TPM=1. Because of this, boards with TPMs that didn't handle S3 resume properly would cause a hard reset. Allow one to build with MOCK_TPM=1 on the command line so that S3 can still work. Change-Id: I9adf06647de285c0b0a3203d8897be90d7783a1e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2976 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01lynxpoint: fix enable_pm1() functionAaron Durbin
The new enable_pm1() function was doing 2 things wrong: 1. It was doing a RMW of the pm1 register. This means we were keeping around the enables from the OS during S3 resume. This is bad in the face of the RTC alarm waking us up because it would cause an infinite stream of SMIs. 2. The register size of PM1_EN is 16-bits. However, the previous implementation was accessing it as a 32-bit register. The PM1 enables should only be set to what we expect to handle in the firmware before the OS changes to ACPI mode. Change-Id: Ib1d3caf6c84a1670d9456ed159420c6cb64f555e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2978 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01lynxpoint: split clearing and enabling of smmAaron Durbin
Previously southbridge_smm_init() was provided that did both the clearing of the SMM state and enabling SMIs. This is troublesome in how haswell machines bring up the APs. The BSP enters SMM once to determine if parallel SMM relocation is possible. If it is possible the BSP releases the APs to do SMM relocation. Normally, after the APs complete the SMM relocation, the BSP would then re-enter the relocation handler to relocate its own SMM space. However, because SMIs were previously enabled it is possible for an SMI event to occur before the APs are complete or have entered the relocation handler. This is bad because the BSP will turn off parallel SMM save state. Additionally, this is a problem because the relocation handler is not written to handle regular SMIs which can cause an SMI storm which effectively looks like a hung machine. Correct these issues by turning on SMIs after all the SMM relocation has occurred. Change-Id: Id4f07553b110b9664d51d2e670a14e6617591500 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2977 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01Winbond W83627HF: Rename and move ASL snippet to `acpi/superio.asl`Paul Menzel
Put the ASL snippet for inclusion in the DSDT under the `acpi/` folder as it is done for the other Super I/O devices. $ find src/superio/ -name *asl src/superio/ite/it8772f/acpi/superio.asl src/superio/smsc/mec1308/acpi/superio.asl src/superio/smsc/sio1007/acpi/superio.asl src/superio/winbond/w83627hf/devtree.asl As there are no users of this file yet, no other adaptations need to be made. Change-Id: Id10cd8897592b780c9fd3bd6b45ada4cf1fcf33e Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2937 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01ASRock E350M1: mptable.c: Remove unused variable `dev`Paul Menzel
When building the ASRock E350M1, the following warning is shown. $ make # on Jenkins (build server) […] CC mainboard/asrock/e350m1/mptable.ramstage.o src/mainboard/asrock/e350m1/mptable.c:64:12: warning: unused variable 'dev' [-Wunused-variable] […] Removing the variable `dev` addresses the warning. The same change was done in the following commit for the AMD Persimmon board. commit d7a696d0f229abccc95ff411f28d91b9b796ab74 Author: efdesign98 <efdesign98@gmail.com> Date: Thu Sep 15 15:24:26 2011 -0600 Persimmon updates for AMD F14 rev C0 Reviewed-on: http://review.coreboot.org/137 Change-Id: I83f4630cb6ab1e4c95d04b4e8423850ed1858e45 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2965 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01ASRock E350M1: mptable.c: Include `cpu/amd/amdfam14.h` for `get_bus_conf`Paul Menzel
When building the ASRock E350M1, the following warning is shown. $ make # on Jenkins (build server) […] CC mainboard/asrock/e350m1/mptable.ramstage.o src/mainboard/asrock/e350m1/mptable.c: In function 'smp_write_config_table': src/mainboard/asrock/e350m1/mptable.c:58:3: warning: implicit declaration of function 'get_bus_conf' [-Wimplicit-function-declaration] […] Including the header file `cpu/amd/amdfam14.h` declaring the function addresses this warning. The same change was done in the following commit for the AMD Persimmon board. commit d7a696d0f229abccc95ff411f28d91b9b796ab74 Author: efdesign98 <efdesign98@gmail.com> Date: Thu Sep 15 15:24:26 2011 -0600 Persimmon updates for AMD F14 rev C0 Reviewed-on: http://review.coreboot.org/137 Change-Id: I7912571fa57f6512b10fc9b5845427fcb6eb50c0 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2966 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01ASRock E350M1: mainboard.c: Include `cimx_util.h` for `pm_iowrite`Paul Menzel
When building the ASRock E350M1, the following warning is shown. $ make # on Jenkins (build server) […] CC mainboard/asrock/e350m1/mainboard.ramstage.o src/mainboard/asrock/e350m1/mainboard.c: In function 'mainboard_enable': src/mainboard/asrock/e350m1/mainboard.c:63:2: warning: implicit declaration of function 'pm_iowrite' [-Wimplicit-function-declaration] […] This warning was introduced by moving the initialization of the ASF registers using `pm_iowrite` to `mainboard.c` in commit db6c5bfd8bdef4489e7fec533cb2ca8ae6c24cf3 Author: Jens Rottmann <JRottmann@LiPPERTembedded.de> Date: Thu Mar 21 22:21:28 2013 +0100 Asrock E350M1: Use SPD read code from F14 wrapper Reviewed-on: http://review.coreboot.org/2875 and is fixed by including `southbridge/amd/cimx/cimx_util.h` declaring `pm_iowrite`. Note, that the other AMD SB800 based boards seem to use the header file `southbridge/amd/sb800/sb800.h`, so no warning is shown for those. But since the CIMx SB800 code is used, the routines from the CIMx directory are more appropriate to declare these functions. So delete the commented out include line for this header too. Change-Id: I179aad5157c5a91294339a3e7b6c4c1715c6f099 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2957 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01wtm2: select write-combining memory for graphicsAaron Durbin
Auto-select marking the graphics memory as write-combining. Change-Id: Icf61c5cbd129a97a106f0aaeca4e010d4799b4b8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2981 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01link: select write-combining memory for graphicsAaron Durbin
Auto-select marking the graphics memory as write-combining. Change-Id: I0b913f0b318bf57275643d3cfb5bc54ca8a005f5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2982 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 05:24:35 +0000