summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2018-02-07security/vboot: overwrite existing spaces during factory init for tpm2Andrey Pronin
In TPM 2.0 case, if the factory initialization is interrupted after defining, say, the kernel tpm nvram space but before writing to this space, the following will happen upon reboot when the factory initialization will be re-attempted. Writing to this space will be skipped, and coreboot will finish the factory initialization with this space remained unwritten. At a later stage, when the rollback logic will attempt to check the version in the kernel space, it will fail (TPM2.0 returns an error when reading from unwritten spaces), and the system will go into recovery with no way out (since the kernel space will never be written). This change fixes that by always writing to the kernel, MRC hash and firmware spaces during factory initialization, even if the space already existed by that time. BUG=b:71884828 TEST=delete, define, but not write to the kernel space; trigger factory initialization; coreboot should fill the kernel space and continue booting. Change-Id: I48d8bb4f9fc0e5276e6ec81247b3b6768ec9fa3b Signed-off-by: Andrey Pronin <apronin@google.com> Reviewed-on: https://review.coreboot.org/23456 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2018-02-07storage: Fix CMD13 failure issueBarnali Sarkar
This patch stores the correct capabilities for EMMC media which in turn sets the correct timing data for HS400 mode. Without this code change, EMMC CMD13 is failing at the end of HS400 mode switching. BUG=none BRANCH=none TEST=Build and boot Soraka Change-Id: I3f00c9eace7cc136d86a1e07f040fbfc09e0e02e Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23541 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-07intel/common/block/cpu: Change post_cpus_init after BS_DEV RESOURCESBarnali Sarkar
This patch changes the sequence of post_cpus_init() function of mp_init to very last of the stages, i.e., ON_EXIT of BS_WRITE_TABLES for normal boot path, and to ON_ENTRY of BS_OS_RESUME for S3 Resume path. Also, the fast_spi_cache_bios_region() call inside post_cpus_init() function is left out, since caching the SPI Bios region is not required now at this stage. BUG=none BRANCH=none TEST=Build and boot in Soraka (KBL), executed stability tests on multiple systems. Change-Id: I97c4a4096a3529a21bae6f2cf5aac654523a5b22 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/23540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-07soc/intel/skylake: Add Kabylake PCH H device ID'sV Sowmya
Add PCH,MCH,IGD,I2C,PMC,SMBUS,XCHI and UART IDs for PCH H. Change-Id: I52b38457bc727735ceb5003cbccda6d7ba3340a2 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/23382 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-06nb/intel/sandybridge: Always use the same MMCONF_BASE_ADDRESSArthur Heymans
'Optimizing' MMCONF_BASE_ADDRESS for the native codepath prevents the use of fallback/normal with both the native raminit and the mrc.bin. Using the same MMCONF_BASE_ADDRESS as the mrc.bin codepath means that 128MB less is available to devices using the native raminit. Most devices reserve 2048M for non memory resources below 4G, which in most cases is more than adequate. Devices with only 1024M (and that don't already use the mrc.bin) are: * lenovo/x220 * lenovo/x230 * lenovo/x131e * lenovo/x1_carbon_gen1 Those could fail to allocate PCI resources, but on at least x220 with a somewhat default configuration (USB3 expresscard, Wireless PCIe card) it still boots fine, so one should not expect many problems from this change. Change-Id: I1d0648fe36c88bd9279ac19e5c710055327599fd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-02-06google/gru: Add another 512KB to the COREBOOT FMAP regionJulius Werner
With the new extra detachable UI elements, we're running out of space in Scarlet's RO CBFS. Thankfully, the GBB is still massively overdimensioned, so we can steal another half MB from there. This patch changes the FMAP for some boards that have already had production firmware releases. However, all the new changes are to the RO parts of the FMAP, so there shouldn't be a way this could cause a problem for updates. Change-Id: Iec182de3e894e56fec2a64b034c0ca65d78a5522 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/23595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06soc/intel/skylake: sort CPU_SPECIFIC_OPTIONS and drop duplicateVadim Bendebury
ACPI_NHLT happens to be selected twice. BRANCH=none BUG=none TEST=generated fizz .config does not change Change-Id: Ic525ee07015deb88fff4c15cad9dbbeada8a4479 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/23601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-06nb/intel/haswell: Use the common MRC cache driverArthur Heymans
This driver uses an fmap region for the MRC cache instead of a CBFS file which makes it easier to manage if one wants to write protect it. Change-Id: Iaa6b9f87c752088d70882fd05cb792e61a091391 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-06mb/google/kahlee: Fix grunt I2C rise/fall timesJustin TerAvest
I2C bus rise/fall times were measured as follows. Signals were generated with: - bus 0: manual i2c driver in depthcharge - bus 2,3: i2cdetect -r <bus_number> and then measured manually with an oscilloscope. BUG=b:72442912 Change-Id: I291e144249271ec34a93417398e54e68b8e21e23 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06soc/intel/appololake: Remove dead MPINIT code selectionArthur Heymans
This not hooked up anywhere. Change-Id: I95a2d14aea6f1a6013edf1bcb88bb35de88cba4f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23458 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06cpu/intel/haswell: Don't select PARALLEL_CPU_INITArthur Heymans
PARALLEL_CPU_INIT pertains to initialize_cpus() in src/cpu/x86/lapic/lapic_cpu_init.c which haswell does not use as it uses PARALLEL_MP init. Change-Id: I46b6f72e8e372b8c8564243ece7aed3a9371c621 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-06soc/amd/stoneyridge/acpi/sleepstates.asl: Fix guarded codeRichard Spiegel
Remove #if statement and replace it with if(IS_ENABLED(...)) per coreboot recommendations. BUG=b:62200858 TEST=Build kahlee. Change-Id: I268b228706a625e1415c4f24e808261c279ba41e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-06mb/google/kahlee: Remove cmos.layoutRichard Spiegel
CMOS layout is not used and can be removed. A change to Kconfig is needed in order not to break the build. BUG=b:64207749 TEST=Build kahlee. Change-Id: Ib5d18e80a56111d96c730420db865194c71de1b3 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-06soc/intel/cannonlake: Increase heap sizeJohn Zhao
After adding NHLT and max98373 amp support, cnlrvp fails to boot with error: out of memory (free_mem_ptr >= free_mem_end_ptr). Increase HEAP_SIZE from 0x4000 to 0x8000. BUG=None TEST= emerge-cnlrvp coreboot nhlt-blobs chromeos-bootimage coreboot-private-files-cnlrvp and verify cnlrvp boots to kernel. Change-Id: Icb0f3c626b784d73e417e5722b3b4da29ab5acce Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06mainboard/broadcom/blast: Remove unnecessary braces {}Elyes HAOUAS
Fix coding style Change-Id: I1b6913f9fe97e42836a6698645d0d380ceecec0d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23523 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06mb/asus/m2v-mx_se: Add `cmos.default`Paul Menzel
Add `cmos.default` to get rid of four seconds in romstage. Choose 8 MB for size for video RAM. Order the entries like in `cmos.layout`. Change-Id: If2dcc266f6f061807401b62647124ce96e9a3802 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/23468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-02-06mb/google/eve: Enable HotPlug on PCIe root port for WiFiDuncan Laurie
Enable HotPlug for the PCIe root port that the WiFi device is on so the OS can re-train the link without needing a reboot if it goes down unexpectedly at runtime. BUG=b:72417777 TEST=enable HotPlug on Eve Root Port 0 (WiFi) and check in linux that it is identified as a HotPlug capable root port. Change-Id: Id2b7fc92c8c9128f0e28102eb5991bda7fbf6799 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23512 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-06soc/intel/skylake: Add devicetree variable for PCIe HotPlugDuncan Laurie
Add a variable to fill out the FSP UPD variable for PCIe HotPlug, which allows a mainboard to enable HotPlug on individual root ports. BUG=b:72417777 TEST=enable HotPlug on Eve Root Port 0 (WiFi) and check in linux that it is identified as a HotPlug capable root port. Change-Id: I6b1f525e41909a3f81984806c4ef20239032c8d6 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23511 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-06google/kahlee: Initialize non-early i2c buses in mainboard_initDaniel Kurtz
Initialize non-early i2c buses in ramstage. BUG=b:69407112 TEST=Boot depthcharge w/ CLI enabled on grunt. devbeep => plays beep BRANCH=None Change-Id: I634a7a823cc393243841dbd55e52abe3f0e72c5a Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23554 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06soc/amd/stoneyridge: Add API to initialize non-early_init i2c busesDaniel Kurtz
Provide a method for initializing i2c buses that are not marked as early_init in the device tree. These i2c buses can be enabled in a mainboard's ramstage, for example. BUG=b:69407112 TEST=Boot depthcharge w/ CLI enabled on grunt. devbeep => plays beep BRANCH=None Change-Id: I6e49b0de9116138ba102377d283e22d7b50d7dca Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06soc/intel/skylake: Set PsysPmax valueGaggery Tsai
According to doc #543977 Power Architecture Guide, PsysPmax is the maximum platform power. It maps to the full-scale of Psys signal. This patch adds a "psys_pmax" member in chip information which allows boards to set up maximum platform power. BUG=b:71594855 BRANCH=None TEST=Set "psys_pmax" in device tree & "USE=fw_debug emerge-fizz chromeos-mrc coreboot chromeos-bootimage" & ensure correct PsysPmax value is passed to FSP-S through UPD. Verfied on KBL-R and KBL-U SKUs. Change-Id: I44f2e2917a8eb9ce3bb69d9c15899d4c7c5b2883 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/23268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-06mb/google/fizz: Determine PsysPl3 and Pl4 valuesShelley Chen
Pass in fizz-specific adapter-based PsysPl3 and Pl4 values to avoid brownouts. According to Intel doc #560604, page 74, the max time window is 64ms (code=6) and the min duty cycle we can set is 4%. BUG=b:71594855 BRANCH=None TEST=Boot to OS and check MSRs using iotools for expected values Change-Id: I06a4c5bc25f6ec036b79f6941f80e26058d64930 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/23528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-06mb/google/nautilus: Work around the power issue of MIPI and USB camerasAndy Yeh
On EVT, the USB and MIPI cameras share the same power source. As a result, when the MIPI camera driver turns off the camera once probed, USB camera will be disconnected. To make USB camera work on EVT devices, we will need a hack in coreboot to leave the camera power always-on. BUG=b:72839352 TEST: Verified the MIPI and USB camera function on DUT board TODO: This power issue will be fixed on DVT build. Will revert this patch once confirmed power sources for MIPI and USB camera could be supplied individually. Change-Id: Icaaf7e17447492f2e2f2d03eb9a35bcc53667f28 Signed-off-by: Andy Yeh <andy.yeh@intel.com> Reviewed-on: https://review.coreboot.org/23546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andy Yeh
2018-02-05mb/google/fizz: Get OEM ID and SKU ID from ECDaisuke Nojiri
This patch makes coreboot fetch OEM ID and SKU ID from EC. If it fails, it falls back to GPIO pins. BUG=b:70294260 BRANCH=none TEST=Verify AP log shows expected OEM ID and SKU ID on Fizz. Change-Id: I06d3a205275b46660b3974bc3673d4be8e13f6d1 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23548 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-05ec/google: Get OEM ID and SKU ID from ECDaisuke Nojiri
This patch adds EC_CMD_GET_CROS_BOARD_INFO and two APIs to fetch OEM ID and SKU ID from cros EC. CBI abbreviates Cros Board Info. BUG=b:70294260 BRANCH=none TEST=Verify AP log shows expected OEM ID and SKU ID on Fizz. Change-Id: Iff69a2dc0e562d87dd287f79c407f23aeb09fb9e Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05mb/intel/glkrvp: Set S0ix lazy wake maskShamile Khan
Enable S0ix wake mask programming from coreboot using unified host event programming interface. BRANCH=none BUG=none TEST=Verify masks with ec hostevent command on S0, S3, S5 and S0ix. Also check that lidclose/lidopen command from EC console wakes system up from S3 or S0ix. Change-Id: I60343aaa9e0ddfd38d42b6d0aa2820e2fd880fb7 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/23453 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-05soc/amd/stoneyridge/acpi/sb_pci0_fch.asl: Fix instabilityRichard Spiegel
A file that has several methods cannot be included inside a method. It has to be included inside a scope, but not inside a method or it'll cause problems (instability). There is an ugly construction in method _INI. It's needed because if AmdImc is not included then the call to ITZE would break the build. BUG=b:62200858 TEST=Build kahlee. Change-Id: If6c877df5a87df1b348de92868b91eed4a76de55 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-05google/lars: Turn on keyboard backlight in romstageJenny TC
Cherry-pick from Chromium: a60ac10 [Lars: Turn on keyboard backlight in romstage] Use the keyboard backlight to provide indication that the system is booting. This is useful for determining that a system is in S0 and is running BIOS code. TEST=boot on Lars and see keyboard backlight come on early Original-Change-Id: I4fede6cff85f4487cedfbccf6cc24c6380d905e0 Original-Signed-off-by: Jenny TC <jenny.tc@intel.com> Original-Tested-by: Divagar Mohandass <divagar.mohandass@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I4b1fed10d9bd1ae1b265e848417836f816f252f3 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05google/lars,lili: Update GPIO mappingdavid
Combination of several commits from Chromium tree: 949037c [Lars: coreboot GPIO changes for EVT] c286789 [Lars: Set USB Type A current limit to 2A] 0f1b26d [lars: set BOOT BEEP GPIO GPP_F_23 to output and Low] 4a0650d [Lili: Support touchscreen] Disable unused GPIOs based on schematic and adds GPIO mappings for HSJ_MIC_DET, PCH_BUZZER and AUDIO_INT_WAK. Set GPIOs USB_A0_ILIM_SEL & USB_A1_ILIM_SEL low to enable 2A charging from the USB Type-A port. GPP_F_23 is set to NC currently and is floating, causing the on-board speaker to have no audio or the audio has noise; set to output/low. These commits bring lars' GPIO mapping in line with the Chromium tree. Original-Change-Id: I3bf4aa8599255e5382d99810b4c83b4c97c648b6 Original-Change-Id: I328a8be22dc59492477cbe362a5d5b94aa80a397 Original-Change-Id: I253e55bf2b423363a00347778cabaa4184d85aec Original-Change-Id: I761f7c5ea5fc7a173c07a8c37da1338a1b2cd269 Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-by: Shobhit Srivastava <shobhit.srivastava@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: David Wu <david_wu@quantatw.com> Original-Tested-by: Balaji Manigandan <balaji.manigandan@intel.com> Original-Tested-by: Kuen Liu <kuen.liu@quantatw.com> Change-Id: Ic2d188fbf913a11fbf6ad1f0eb3a5e72ba4cb1cf Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05google/lars: Update the MAINBOARD_FAMILY string in KconfigDuncan Laurie
Cherry-pick from Chromium: 99cd8f8 [lars: Update the MAINBOARD_FAMILY string in Kconfig] This string was left at the default for kunimitsu and should be updated to indicate the proper mainboard. Original-Change-Id: Icc0e162d57242e7b0610fb570ef1a8a45ee16e4f Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ia4b70227c8cfdfe939e40ea6258d494337a2907b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05google/lars,lili: Update SPD DataMatt DeVillier
Combination of several commits from Chromium tree: 3b875a2 [Lars: Update Memory ID for DVT board] b6d7c63 [Lili: Update Memory IDs] f203f99 [Lili: Add new SPD for Hynix H9CCNNN8GTALAR-NUD] a6571bf [Lili: Update Memory IDs] 80e1841 [Lili: Update Memory IDs] 58d4487 [Lili: Fix memory string show error in spd data] These commits bring lars' SPD data in line with the Chromium tree. Original-Change-Id: I54d0e6d2bbe86d5dc2ee5825f332d36abfa99084 Original-Change-Id: I9431393f369a1d2870bdabba1fc55d9cefae5c39 Original-Change-Id: I3b325a1801f49109429eb647d8d98a5537ce1b7b Original-Change-Id: Ie8a32d8a26ea1054e2df8432084a95d1cb03f991 Original-Change-Id: I64c73950e3bea57b6c5a90257211b3d6d7f1baab Original-Change-Id: I0e425fa4f0bae544680d5522c2e05a4f7a3be95a Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Signed-off-by: Ren Kuo <Ren.Kuo@quantatw.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Tested-by: David Wu <david_wu@quantatw.com> Original-Tested-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I7cc9b01012b0b9ed72804192bb5953243fc859b4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05google/lars: Add sdmode-delay property for max98357aMatt DeVillier
Adapted from Chromium commit: af3ec09 [Lars: Add sdmode-delay device property for maxim98357a] Add "sdmode-delay" as a device property for the maxim98357a codec. This speaker amp requires both SFRM & BCLK to active and stable before it is unmuted. If there is a BCLK and no SFRM, that results in a pop noise. Adding a configurable delay parameter for all Skylake platforms to allow sufficient time for the BCLK & SFRM on I2S to be stable before the amp unmutes itself to avoid a pop noise at the start of playback. Setting the delay to 5ms since the observed delay between SFRM and unmuting of the amp is around 2ms. Adaptation needed to account for parameters having moved from mainboard.asl to devicetree in upstream tree. Original-Change-Id: I1fff4f86ff816e907553e7a6f1d05713f9d85084 Original-Signed-off-by: Rohit Ainapure <rohit.m.ainapure@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I8a1c52ccdb08df9a4ab293e12bb266309e08737b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05google/lars: update device properties for Nuvoton codecMatt DeVillier
Adapted from Chromium commit: 848ee3a [Lars: Add device properties for Nuvoton codec] Update sar-threshold, sar-compare-time, sar-sampling-time properties to match values in lars' Chromium branch. Adaptation needed to account for parameters having moved from mainboard.asl to devicetree in upstream tree. Original-Change-Id: Id0c28e50406a29e6f33d04ca78fd2a3e3974fa90 Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Benson Leung <bleung@chromium.org> Original-Tested-by: David Wu <david_wu@quantatw.com> Change-Id: I2748a315d27eb947197109808b4d5fa8a82c8cf3 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05google/lars,lili: Set new thermal parametersdavid
Cherry-pick from Chromium: 55c0eb3 [Lili: Set new thermal parameters] Set new parameters of DPTF for both Lars and Lili. The acoustic will have higher 1.6dB in transition mode, when using Lili fan table on Lars. Original-Change-Id: I730ac483e2a6d43c8dcfe94da6761194c14f3163 Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Tested-by: David Wu <david_wu@quantatw.com> Change-Id: I3bf16db43bb90a542c6526f3bc891f820da00ca0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05google/lars: Update DPTF settingdavid
Cherry-pick from Chromium: dff141b [Lars: Update DPTF setting] Original-Change-Id: I1f2686eced07c7fb1bde3c660df6d6efac607695 Original-Signed-off-by: David Wu <david_wu@quantatw.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ifd3e844688588b6d1c69459f75c0d7da93ba3688 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05soc/intel/skylake: Set PsysPl3 and Pl4Shelley Chen
If given a value for PsysPl3 and/or Pl4, set the appropriate MSR. BUG=b:71594855 BRANCH=None TEST=boot up and check MSRs in OS to make sure values are set as expected. Test on Fizz, which will set these values in mainboard. Change-Id: Idbe04f48079b4fa3302d21acd065f2e4c53dd1ed Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/23527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Gaggery Tsai <gaggery.tsai@intel.com>
2018-02-05soc/intel/common/block/pmc: Fix ACPI BAR and PCI_COMMAND in PMC config spaceHannah Williams
read_resources in common/block/pmc/pmc.c is corrupting the BAR at offset 0x20. pch_pmc_read_resources | pci_dev_read_resources | pci_get_resource Within pci_get_resource, the BAR is read and written back. Since read of ACPI BAR does not return the correct value, the subsequent write corrupts the BAR. Hence re-programming the BAR. Also, reading PMC STATUSCOMMAND register does not return bit 0 correctly in pci_dev_enable_resources. This causes IO SPACE ACCESS to get disabled. Hence making sure IO ACCESS gets enabled by setting dev->command TEST=Can boot to OS Without this change coreboot will be stuck at "Disabling ACPI via APMC:" Change-Id: I27062419d06127951ecbbb641835d06ca39ff435 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/23230 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-05mb/google/kahlee: Enable wlan card so it can be detectedMartin Roth
The wifi card was not being powered, and was being held in reset during PCI enumeration, so it was not being brought up. BUG=b:72738963 TEST=Verify wlan card shows up in lspci Change-Id: I5a1e83298af35aa80c67c75cd6ec0a2c3213891e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23552 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-05coreboot_tables: Document coreboot framebufferNico Huber
A discussion around the `bytes_per_line` field (it was ignored in CorebootPayloadPkg for some reason) made the lack of documentation obvious. Change-Id: I5e1343b5fe37ac106e61e6907fbcc1737ac56f8b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/23466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-02-05soc/intel/apollolake: Clear RTC failure bit after reading itFurquan Shaikh
This change ensures that the RTC failure bit is cleared in PMCON1 after cmos_init checks for it. Before this change, RPS was cleared in dev init phase. If any reboot occurred before dev init stage (e.g. FSP reset) then RPS won't be cleared and cmos_init will re-initialize CMOS data. This resulted in any information like VBNV flags stored in CMOS after first cmos_init to be lost. BUG=b:72879807 BRANCH=coral TEST=Verified that recovery request is preserved when recovery is requested without battery on coral. Change-Id: Ib23b1fcd5c3624bad6ab83dce17a469b2f5b5ba8 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/23578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-02arm64: Pass COREBOOT flag to ARM TF, always enable loggingJulius Werner
This patch changes the way coreboot builds ARM TF to pass the new COREBOOT flag introduced with the following pull request: https://github.com/ARM-software/arm-trusted-firmware/pull/1193 Since the new coreboot support code supports the CBMEM console, we need to always enable LOG_LEVEL INFO. Supporting platforms will parse the coreboot table to conditionally enable the serial console only if it was enabled in coreboot as well. Also remove explicit cache flushes of some BL31 parameters. Turns out we never really needed these because we already flush the whole cache when disabling the MMU, and we were already not doing it for most parameters. Change-Id: I3c52a536dc6067da1378b3f15c4a4d6cf0be7ce7 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/23558 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-02-02rockchip/rk3399: Pass coreboot table pointer to ARM TFJulius Werner
This patch passes the coreboot table base address to ARM TF on RK3399 devices to be able to use the new coreboot table parsing support. Change-Id: I5cb2f13ce71e374207d0fa7a71c38852d680dc56 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/23557 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-02rockchip: Correct UART reference clock valueJulius Werner
The Rockchip UARTs are tied directly to the 24MHz oscillator and are thus clocked with exactly 24MHz. The reasons why our code instead uses some 23.xxMHz value have long been lost in time. For the current shared 8250 implementation, the baud rate divisor for 115200 would be the same. Correcting this does make the information in the coreboot table more accurate and help payloads chose a better divisor, though. Change-Id: Ieceb07760178f8ddbb5936f8742b78f8def4072d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/23556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-02rockchip/rk3288: Fix includes for <soc/clock.h>Julius Werner
This header uses common types and macros so it needs to include the headers that provide those itself. Change-Id: Ieceb0deadbeef8ddbbb00b13542b78f8def4072d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/23559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-02-02rockchip/rk3399: extend delay between saradc power up and start commandLin Huang
We found when ambient temperature low, with now saradc frequency and delay between saradc power up and start command, there may get wrong adc value, then get the wrong ramid or boardid, so lower the saradc frequency and add the delay time between power up and start command. BUG=b:70692504 BRANCH=gru TEST=test on Dru in 0C temperature, always get right adc value Change-Id: I42e49ca63299479912fa05e2a62cba6f2de4b337 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/23515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-02google/gru: Use newer version of Innolux P097PFG panel init codeLin Huang
There is a line artifact in the lower third of the display with the current initialization code. So update it with code provided by Innolux to fix this issue. BUG=b:69689064, b:72191820 TEST=boot on dru with an Innolux panel and artifact line disappear. Change-Id: I9679c4f7f706fd6cd2e1dba7ec79e772fe3f227a Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/23561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-02ec/google/chromeec: Remove wake flag from keyboard IRQDuncan Laurie
The keyboard IRQ was changed to ExclusiveAndWake in order to support waking from suspend-to-idle (S0ix) with commit f611fcfacac5be14a51e04ae4d0b1e25cd5439c0 http://review.coreboot.org/11712 However this is triggering a kernel panic on Windows 10 because it apparently does not like legacy device interrupts to to be set as wake capable. This change is no longer necessary because the linux kernel was changed to always treat the keyboard as wake capable: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/input/serio/i8042.c?id=f13b2065de8147a1652b830ea5db961cf80c09df Change-Id: I26e27de68095f8d176108f39312338522d7cfba0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/23563 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-02-02mb/google/kahlee/mainboard.c: Create mainboard_pirq_dataRichard Spiegel
When booting kahlee, there's an error message: "Warning: Can't write PCI IRQ assignments because 'mainboard_pirq_data' structure does not exist". This is generated by write_pci_cfg_irqs due to missing mainboard_pirq_data. BUG=b:70788755 TEST=Build and boot kahlee. Warning message must be gone. Change-Id: If07d2f54f06f6cf77566c43eddc8ee8a314e7a3a Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-02nb/intel/sandybridge: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: I6dfef118dc2fecf2a8f2f3401c779a3becfb71a9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-02-02arch/x86/acpi/statdef.asl: Remove unnecessary whitespaceElyes HAOUAS
Change-Id: I8c49853a54fc301d39dc7c362f2085c25fad7fbd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 22:10:58 +0000