Age | Commit message (Collapse) | Author |
|
Apply commit d7b88dcb (mb/google/x86-boards: Get rid of power button
device in coreboot) to AMD Brazos boards [1]:
> As per the ACPI specification, there are two types of power button
> devices:
> 1. Fixed hardware power button
> 2. Generic hardware power button
>
> Fixed hardware power button is added by the OSPM if POWER_BUTTON flag
> is not set in FADT by the BIOS. This device has its programming model
> in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this
> power button device by default if the power button FADT flag is not
> set.
>
> On the other hand, generic hardware power button can be used by
> platforms if fixed register space cannot be used for the power button
> device. In order to support this, power button device object with HID
> PNP0C0C is expected to be added to ACPI tables. Additionally,
> POWER_BUTTON flag should be set to indicate the presence of control
> method for power button.
[..]
> This change gets rid of the generic hardware power button from all
> google mainboards and relies completely on the fixed hardware power
> button.
The same problem exists with the AMD Hudson devices in coreboot.
For AMD Hudson (2) and Yangtze based devices this was removed in commit
44f2fab8 (AMD hudson and yangtze boards: Let mainboard declare power
button) [2].
Two devices are detected.
$ dmesg | grep Button
[ 0.209213] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.209254] ACPI: Power Button [PWRB]
[ 0.209332] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.209349] ACPI: Power Button [PWRF]
$ sudo evtest
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0: Power Button
/dev/input/event1: Power Button
[..]
[1]: https://review.coreboot.org/5546
[2]: https://review.coreboot.org/27272
Change-Id: I0cbecb72f7e1bf3d051d3b7656c6af4d6f43b497
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/27496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The system should boot fine to OS on pressing power button before the
system enters G3. However, on hatch, we observe that the system waits
for few seconds at "Starting kernel" and then resets, with SD card tray
inserted and SD_CD# pad reset config set to DEEP. Hence configuring SD_CD#
pad reset config to PLTRST.
BUG=b:129933011
TEST=Built and verified on hatch.
Change-Id: Ic4466b96332f095ff39b28d98607e95fc3d12d6a
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
cbmem_find is not available in every stage.
Remove usage of cbmem_find() and use GEN_PMCON1 always.
BUG=NA
TEST=Booting Embedded Linux on Facebook FBG-1701
Change-Id: Id97d57864b3e241e8f046d9b1caebdce199a46b1
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
New emmc DLL values for Casta
BUG=b:122307918
TEST=Boot to OS on 12 systems
Change-Id: Ie51885fb9628fa093ecc38f4a3f3157f751ca9ab
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
vboot_measure_cbfs_hook() is included when CONFIG_VBOOT_MEASURED_BOOT
is enabled, but this function is defined as 0 in vboot_crtm.h using ENV_
Remove ENV_ for vboot_measure_cbfs_hook() function definition.
This function is added to bootblock stage also.
BUG=NA
TEST=Build Google Banon and Google Cyan
Change-Id: Ic62c18db09c119dfb85340a6b7f36bfd148aaa45
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32532
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Save whether or not vboot has selected developer mode as a flag
in vboot_working_data. Other coreboot code may access this flag
without needing to consult vboot_handoff (which is in the process
of being deprecated).
BUG=b:124141368, b:124192753
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Ieb6ac4937c943aea78ddc762595a05387d2b8114
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
These Kconfigs are mostly used in src/lib/.
Change-Id: I7aa5436c6ff5fef53fde2081e902d793f3581c1e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32882
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With CB:32726 ("lib/timestamp: Make timestamp_sync_cache_to_cbmem() in
postcar") timestamps are synced from cache to cbmem in postcar as
well. For postcar, the cache lives in BSS just like ramstage. This
change updates TIMESTAMP_CACHE_IN_BSS to include both ramstage and
postcar and uses this instead of ENV_RAMSTAGE to check for cache
location.
Ideally, it would be good to get rid of timestamp cache in postcar and
ramstage completely since early cbmem init is enabled by default in
coreboot and it is guaranteed that cbmem is recovered before
timestamps are added in ramstage or postcar. This change is being
pushed in as a temporary fix while I make the changes to remove
timestamp cache from romstage and postcar completely.
BUG=b:132939309
Change-Id: I2d82a96aba954df77c9386b7bd2e2ec0973881be
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
The VPD field name is dock_passthrough, not dock_passthru. Fix it.
(I assume there is no length limit)
BUG=b:132689337
TEST=check that the feature can now be controlled by the associated
enterprise policy
Change-Id: Icc2b070313fde74447279cd6ccaa4e3eb6d119ee
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32839
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to JEP106 from JEDEC, fix manufacture ID of Crucial,
Super Talnet and Micron.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I10a268a7f3bde405b95bd3a16d5d121be623c7ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Fill the DIMM serial number field for SMBIOS from the saved SPD
data that is returned by FSP.
BUG=b:132970635
TEST=This was tested on sarien to ensure that SMBIOS type 17
filled the serial number from the DIMM:
Handle 0x000B, DMI type 17, 40 bytes
Memory Device
Locator: DIMM-A
Serial Number: 41164beb
Change-Id: I85438bd1d581095ea3482dcf077a7f3389f1cd47
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
Set the system serial number from the VPD key "serial_number" and
the mainboard serial number from the VPD key "mlb_serial_number".
BUG=b:132970635
TEST=check serial number is set in SMBIOS based on VPD, and if there
is no VPD key found then it is empty.
Change-Id: Ia8f1486dcb1edc968b8eb1e6d989b10c05913aca
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This fixes the following changes, which made qualcomm Kconfig
appear on all platforms:
bd0b51c0be1ec2c9a5f02de3c13108c13941e2c2
7a3e46d767890f502b09771e19decc5033e27079
Use proper Kconfig logic.
Change-Id: I0195fd186ac39dd4258fe0781dd6d3d1b1d1679f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32805
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clang does not recognize dead_code() as termination of execution. It
gives this message:
error: control reaches end of non-void function
[-Werror,-Wreturn-type]
This change adds an __attribute__((noreturn)) to ensure that clang
recognises that this function will terminate execution.
This change is more general solution to the problem that was addressed
in the specific at https://review.coreboot.org/c/coreboot/+/32798
Signed-off-by: Alan Green <avg@google.com>
Change-Id: I5ba7189559aa01545d5bbe893bced400a3aaabbb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Move the DMI initialization code to northbridge folder.
Leave southbridge specific settings in bd82x6x folder and call it from
northbridge code.
Tested on Lenovo T520 (Intel Sandy Bridge).
Still boots to OS, no errors visible in dmesg.
Change-Id: Ib0b47391f3309f9ab0c3a3a8d525f38f8cca73c0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Use RCBA and DMIBAR macros to get rid of DEFAULT_RCBA and DEFAULT_DMIBAR.
Tested on Lenovo T520 (Intel Sandy Bridge).
Still boots to OS, no errors visible in dmesg.
Change-Id: Ic9be2240ea10b17c8cc289007dccadbb9e3f69ab
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Add a few comments and use known register values.
Based on the "2nd Generation Intel® Core™ Processor Family Mobile"
datasheet and the existing serialice trace.
Tested on Lenovo T520 (Intel Sandy Bridge).
Still boots to GNU/Linux.
Change-Id: I404515b77a22324f55581f117d79630be4ba64dd
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32071
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Enable LPC TPM support in Kconfig and add pc80/tpm to devicetree
- Enable VBT support in Kconfig and add VBT files extracted from
vendor firmware
- Remove IGPU VBIOS entries from Kconfig
- Remove unused PS2 definitions in superio.asl
- Add PWRB ACPI device entry to mainboard.asl
- Remove duplicate chipset register initialization from mainboard.c
- Move ITE Super I/O configuration to mainboard_config_superio in
romstage.c
Signed-off-by: Alex James <theracermaster@gmail.com>
Change-Id: I2d11c55dc809b920bccf55f5f745d9f29b18bbb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
That's how we do it these days.
Change-Id: I1c088d23dff709bcdcb21310059e6a2aab84c0be
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
That's how we do it these days.
Change-Id: I6bf6460440d0f2e6973734ba8894a4be981d03c5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32812
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Previously cpu_index() always succeeded, but since commit 095c931
(src/arch/x86: Use core apic id to get cpu_index()) it is now possible
for it to indicate an error by returning -1. This commit adds error
handling for all calls to cpu_index(), and restores several checks that
were removed in commit 7c712bb (Fix code that would trip -Wtype-limits)
but are now needed.
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I5436eed4cb5675f916924eb9670db04592a8b927
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The FSP will lock down the configuration of GPP_A12, which
makes the configuration of the GPIO pin on warm reset not
work correctly.
This is only needed for the Arcada variant since it is the only variant
that uses ISH.
BRANCH=sarien
BUG=b:132719369
TEST=ISH_GP6 now works on warm resets on arcarda
Change-Id: Icb3bae2c48eee053189f1a878f5975c6afe51c71
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32831
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Relocate the I2C bus reset code from gpio.c to i2c.c. When it first
went in, gpio.c was a natural location due to the nature of the
algorithm. This is preparation for moving most of gpio.c to common
code.
Change-Id: I3b2d8e1b54e7c5929220d763bd99fe01b0636aaa
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32650
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the stoneyridge AcpiMmio code into soc/amd/common.
The SB800 southbridge introduced the MMIO hardware blocks at 0xfed80000
commonly known as AcpiMmio. Implementations beginning with Mullins
enable decode in PMx04. Older designs use PMx24 and allow for
configuring the base address. Future work may support the older version.
Comparing the documentation for AMD's RRGs and BKDGs, it is evident that
the block locations have not been reassigned across products. In some
cases, address locations are deprecated and new ones consumed, e.g. the
early GPIO blocks were simpler at offset 0x100 and the newer GPIO banks
are now at 0x1500, 0x1600, and 0x1700.
Note: Do not infer the definitions within the hardware blocks are
consistent across family/model products.
BUG=b:131682806
Change-Id: I083b6339cd29e72289e63c9331a815c46d71600d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32649
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We need to store the acpi_gpio struct, not save its address.
Found-by: Clang Static Analyzer
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I41c8bf10ce72bec736da97ccc33f9ada49804dc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch removes ramstage_ prefix from ramstage_elog_add_boot_count()
function.
Change-Id: Ia75b2dc959ace7dc26dc974c5f4b5cb6c5a25617
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
|
|
TEST=Able to build coreboot for CML.
Change-Id: I8a6a97d59277ebfc498c83bb039436ed7c89d2cd
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
|
|
Change-Id: I73c557d6ef009fb2cac35fdea500dee76f525330
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I52ace93ae6f802723823955ac349ed54dc064aaa
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I5a7b53a07fe6fd6121067dcec004e81eb284edbb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: If358e221021466f0058bfc84a322750b34a36d5f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Checking BIST is done in the bootblock.
Change-Id: I3ea2eb6a37c038f7348f0abd2056eee5c07bdb9d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32757
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This allows for serial console during the bootblock and enables
bootblock console by default.
Change-Id: I7746e4f819486d6142c96bc4c7480076fbfdfbde
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Previously broadwell used a romcc bootblock and starting verstage in
romstage was madatory but with C_ENVIRONMENT_BOOTBLOCK it is also
possible to have a separate verstage.
This selects using a separate verstage by default but still keeps the
option around to use verstage in romstage.
With a separate verstage the romstage becomes an RW stage.
The mrc.bin however is only added to the RO COREBOOT fmap region as it
requires to be run at a specific offset. This means that coreboot will
have to jump from a RW region to the RO region for that binary and
back to that RW region after that binary is done initializing the
memory.
Change-Id: I900233cadb3c76da329fb98f93917570e633365f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30384
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This puts the cache-as-ram init in the bootblock.
Before setting up cache as ram the microcode updates are applied.
This removes the possibility for a normal/fallback setup although
implementing this should be quite easy.
Setting up LPC in the bootblock to output console on SuperIOs is not
done in this patch, therefore BOOTBLOCK_CONSOLE is not yet selected.
Change-Id: I44eb6d380dea5b82e3f009a46381a0f611bb7935
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The only functional difference is the use of stack guards.
Change-Id: I95645271e0d93a97f544a1cc4e9a4320738e6a20
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
As of CL:1605641, vboot2 code should be used for setting and
checking display init state. Remove all vboot1 OPROM-related
code, and use the vboot2 display init code which has already
been added in previous commits.
coreboot should not be reading vboot NVRAM flags directly.
Remove the function vboot_wants_oprom(), and instead rely on
display_init_required(), which uses the
VBOOT_WD_FLAG_DISPLAY_INIT value stored in
vboot_working_data.flags, initialized during verstage.
Note that this means in the case of CONFIG_VBOOT=y, the return
value of display_init_required() can only be trusted after
verstage has been executed. This should not be a problem
assuming that all display initialization occurs in ramstage.
BUG=b:124141368, b:124192753, chromium:948529
TEST=Build locally
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Ic8f9dc5a3c7f1546a8fed82bde02be4d04568f8d
Signed-off-by: Joel Kitching <kitching@google.com>
Cq-Depend: chromium:1605641, chromium:1605525
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32723
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Verified Boot OPROM code is being refactored. OPROM is being
generalized into "display initialization". As such, the NVRAM
request flag is being renamed from OPROM_NEEDED to
DISPLAY_REQUEST.
BUG=b:124141368, b:124192753, chromium:948529
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I74374abf7d1deb594c073f7a4a76c9de46092143
Signed-off-by: Joel Kitching <kitching@google.com>
Cq-Depend: chromium:1605640
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32720
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
IASL reports remarks 'Control Method should be made Serialized'.
Change-Id: I5606c6e435da17f7d4732148f6ddcedb1fde4ab0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32769
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Per Intel, the internal thermal protection is working better
than putting B0D4 _PSV in dptf.
BUG=b:131251533
TEST=Get ~10% better Octane score.
Correct TCC and TCC offset in MSR register.
Change-Id: If85afdc673687477ec85a47efcb264a7e5d6ae45
Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@google.com>
|
|
Add hynix_dimm_H9CCNNNCLGALAR-NVD for new onboard memory support.
BUG=b:130337306
BRANCH=firmware-rammus-11275.B
TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage
Flash FW to DUT, and make sure system boots up.
Signed-off-by: YanRu Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: Ibd02953d0c6ac62fa4d7751fd8b103b74433aa73
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Also clean up cannonlake_memcfg_init.
The major changes include:
(1) Add enum 'mem_info_read_type' to spd_info.
(2) Add per-dimm-slot spd_info to cnl_mb_cfg.
(3) Setup memory config for each slot independently.
(4) Squash meminit_memcfg_spd().
BUG=chromium:960581, b:124990009
BRANCH=none
TEST=boot hatch, hatch_whl, and kohaku
Change-Id: I686a85996858204c20fd05ef24787a0487817c34
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32513
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on IT8786E-I V0.4.1 datasheet with following remark:
"Please note that the IT8786E-I V0.4.1 is
applicable only to the D version."
Signed-off-by: Kyösti Mälkki <kyosti.malkki@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I7317da6a72db64f95f9a790ef96ed7a5f93b3aea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30335
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Introduce 7bit Slope PWM registers. New ITE SuperIO may have contiguous
7bit values for PWM slope.
Add option to enable External Sensor SMBus Host.
Update/add registers macros for IT8786E-F which are not backwards
compatible.
Change-Id: I68fbfe62dfa05d0c166abaefbdc2ab873114b236
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
We need to support entering D3Cold from the OS to work around a bug in
the SDHC where the data lines get stuck always reading zeros.
BUG=b:122749418
TEST=Verified the linux kernel can transition between D3 and D0. Also
verified that the device can suspend and resume and continue to have a
functioning SD controller after.
Change-Id: Ifbf48f20c03a752ce3ff773296b536e92db16a62
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This adds the SPDs for Samsung D-die 16Gbit and 32Gbit LPDDR3-2133
chips.
BUG=b:132206809
TEST=boots on atlas with C-die and D-die memory chips
localhost ~ # mosys memory spd print all
0 | LPDDR3 | SO-DIMM
1 | LPDDR3 | SO-DIMM
0 | 1-78: Samsung | 00000000 | K4EBE304ED-EGCG
1 | 1-78: Samsung | 00000000 | K4EBE304ED-EGCG
0 | 8192 | 2 | 64
1 | 8192 | 2 | 64
0 | LPDDR3-800, LPDDR3-1066, LPDDR3-1333, LPDDR3-1600, LPDDR3-1866, LPDDR3-2133
1 | LPDDR3-800, LPDDR3-1066, LPDDR3-1333, LPDDR3-1600, LPDDR3-1866, LPDDR3-2133
localhost ~ #
Change-Id: I8ba000aeeb77f07d7f18bda86b3c07f5b50478b8
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch adds a workaround for Samsung C-die 2G/4G memory chips.
For unknown reasons, some boards with Samsung LP3 memory chips
could not pass early CS/CMD training. MRC has to change the
granularity from 16 ticks to 8 ticks, which implies bad margin
with this memory chip. Another way is to enhance the drive
strength for CS. This patch is to enhance the drive strength for CS
and CMD. Enhancing the drive strength for CMD could gain margin abaout
3 more ticks. Root cause needs to be further investigated with memory
vendor.
BUG=b:131177542
BRANCH=None
TEST=USE=fw_debug emerge-atlas chromeos-mrc coreboot chromeos-bootimage
& check the MRC log to ensure correct Rcomp values are passed to
MRC. Tested with board ID #8 and #11.
Change-Id: I9ea3ceda8dc8bf781063d3c16c7c2d9b44e5ddd6
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@google.com>
|
|
Call the raminit from a common location instead of from the mainboard
specific code.
Change-Id: I65d522237a0bb7b2c032536ede10e2cf93c134d8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32760
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To improve the bootflow, the scope of the pei_data needs to be
extended.
Change-Id: Ic6d91692a7bf9218b81da5bb36b5b26dabac454e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
This also links the gpio configuration instead of including it as a
header.
Change-Id: I9309d2b842495f6cff33fdab18aa139a82c1959c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|