summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-09-08mainboard/google/volteer: Disable S0i3.4 if cr50 firmware is too oldJes Klinke
For Volteer (and future Tiger Lake boards) we can enable mode S0i3.4 only if we know that the Cr50 is generating 100us interrupt pulses. We have to do so, because the SoC is not guaranteed to detect pulses shorter than 100us in S0i3.4 substate. A new Kconfig setting CR50_USE_LONG_INTERRUPT_PULSES controls new code running in verstage, which will program a new Cr50 register, provided that Cr50 firmware is new enough to support the register. This CL adds code to detect the case when Cr50 is unable to generate longer pulses, and in that case explicitly disable the S0i3.4 substate as well as setting gpio_pm_override to all zeroes. This will increase power usage slightly, but guarantee that the GPIO block in the SoC does not switch to a slower sampling clock. In practice, this case will only be encountered in the factory, before the Cr50 chip is updated to a new RW image. (Prior to this change, the gpio_pm_override was hardcoded to zero for Volteer, but the S0i3.4 substate was not disabled. According to my conversations with Intel engineers, that was not enough to guarantee detection pulses shorter than 100us. But it is entirely possible that we have just been "lucky" that the SoC has not gone into low power mode during the boot process, where most of the cr50 communication happens.) TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x BUG=b:154333137 Change-Id: Idef1fffd410a345678da4b3c8aea46ac74a01470 Signed-off-by: Jes Bodi Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-08mb/intel/jasperlake_rvp: Add DTT support for jslrvpSumeet R Pawnikar
Add DTT (Dynamic Tuning Technology) support for Jasper Lake based rvp board. Set power limits and CPU sensor thresholds for DTT based thermal control. BRANCH=None BUG=Noe TEST=Build and boot on jslrvp board Change-Id: I41409c70d8472c54ca452fc98d5ee9edf3ccd307 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44942 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-08soc/mediatek/mt8192: Add SPI flash controller DMA read functionCK Hu
To speed up SPI flash read, enable DMA read function. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: Ic1679ef7940258350feeadac50ad8ea407fd7b90 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-09-08mb/google/kukui: Add LPDDR4X Samsung K4UBE3D4AA-MGCR 4GB supportKevin Chiu
Support 4GB Samsung K4UBE3D4AA-MGCR discrete DDR bootup. BUG=b:162379736 BRANCH=kukui TEST=emerge-jacuzzi coreboot Change-Id: I2f4f084ece067e9884c23004506b450a281a77a6 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45101 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-08hatch: Create dooly variantTony Huang
Create the dooly variant of the puff reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.2). BUG=b:155261464 BRANCH=puff TEST=util/abuild/abuild -p none -t google/hatch -x -a make sure the build includes GOOGLE_DOOLY Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Change-Id: I8e714cc9bf4a49266da77db88f8c4a3ca45878d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Sam McNally <sammc@google.com>
2020-09-07mb/google/zork: update TS power control for dirinbozKevin Chiu
3.6 schematic will separate TS power from eDP PP3300 to GPIO for power control and correct GPIO assignment from GPIO_90 to GPIO_32 instead. BUG=b:161579679 BRANCH=zork TEST=emerge-zork coreboot Change-Id: Ieef67e1d04201c5d9e1dc625c519e6d0307c55f0 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-07ec/system76: Add console supportJeremy Soller
This adds support for line-buffered console output to System76 EC firmware. Once the print command is received, the EC firmware multiplexes the output to any enabled console on the EC. This can be a memory ringbuffer, a parallel port (using the keyboard connector), or i2c (using the battery connector). Once the entire buffer is sent, it sets the command register to 0, indicating completion. For more information, please see: https://github.com/system76/ec/blob/master/doc/debugging.md Tested on system76/lemp9 with CONSOLE_SYSTEM76_EC enabled. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I861bf3e22f40dd6c3ec7ba1d73711b399358e332 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-07mb/system76/lemp9: Add SMBIOS descriptions to root portsFelix Singer
Change-Id: Ie663d424edbbeeb8f5691b00f3977f7501e9ab45 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-07mb/system76/lemp9: Move PCIe root port config into devicetreeFelix Singer
Change-Id: Idd38ab530fd8a0c16231f3499eac393c333a9a92 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-07mb/system76/lemp9: Add comments to SATA portsFelix Singer
Change-Id: I8db3bfbdb557a84413408b4b39a13b24c45497cc Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-07mb/system76/lemp9: Move USB options into devicetreeFelix Singer
Change-Id: I3371bed7c2678fbc3304f53af1413a93462933f5 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-07drivers/mrc_cache: Reduce severity of `region not found` log messageAngel Pons
On autogenerated FMAPs, there's no `UNIFIED_MRC_CACHE` region. The current code will print a spurious error message about it, though. Reduce the log level to BIOS_INFO to avoid confusion. Change-Id: I0961bb2a7d2d81dc5c0d28f6e6c29b320421fc3e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45076 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-07mb/system76/lemp9: Enable SataPortsDevSlpFelix Singer
Enable SataPortsDevSlp for SATA ports 2 and 3. Change-Id: Id6c69f4a6fe45cb5c6aad3f42c741a2724c6166c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-07mb/system76/lemp9: Move SATA options into devicetreeFelix Singer
Change-Id: Idf64d98b36ca95a8bc17a6544993c26e23851cd8 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-07mb/system76/lemp9: Don't configure unused SATA / USB portsFelix Singer
Change-Id: Ic5587402700d7b137e20538549b8a09a64cb6a9f Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-06soc/intel/apl: Add panel power and backlight configurationNico Huber
Change-Id: Id8892ac7aafce1006831e2d9f2806919f5950756 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-06mb/system76/lemp9: enable I2C HID touchpadJeremy Soller
Enable the I2C HID driver, configure I2C bus 0 and add the touchpad device to the devicetree. Tested on lemp9, touchpad confirmed to use i2c-hid driver in Linux instead of PS/2. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: Ic3a90fda134b1d53f28ab687b3033ec52fee843b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43623 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-06mb: remove duplicated Make code for spd.bin generationMichael Niewöhner
Drop duplicated code for spd.bin generation that is provided globally in lib/Makefile.inc. For all affected boards it has been verified that the output binary functionally matches the original one. The changed execution order of Make instructions influenced the cbfs file order. Hence, the rom images can't be compared directly. Thus, the output files of the two timeless abuild runs have been compared. Further, it was verified that the final files in cbfs stay identical, by comparing the extracted cbfs of each board. The boards (possibly) needing modification could be found with something like this (with false positives, though): find src/mainboard -name Makefile.inc | \ xargs egrep 'SPD_BIN|SPD_DEPS' | cut -d: -f1 | sort -u Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Icd3ac0fd6c901228554115c6350d88bb49874587 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-06mb/system76/lemp9: Use absolute path for _GPEJeremy Soller
_GPE cannot be anywhere but at the root of the ACPI namespace. This change ensures that is always the case. Tested on lemp9, GPE still in correct location. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: Ib31683b06e61da4b1859cd939c36879cebf4c03c Reviewed-on: https://review.coreboot.org/c/coreboot/+/43630 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-06mb/system76/lemp9: Drop DeepSx settingsJeremy Soller
The GPIOs required for DeepSx (e.g. SLP_SUS#) are not hooked up on the lemp9. Therefore, drop the DeepSx settings. Tested on lemp9, suspend works correctly. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: Iab179abd7adc3a65dcfc43ce1b5742d514b711fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/43629 Reviewed-by: Michael Niewöhner Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-06mb/system76/lemp9: Enable SA thermal deviceJeremy Soller
Tested on lemp9, SA thermal device appears in lspci. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I527e586b1dae5f8087d2364c63c9db5bcb643214 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner
2020-09-06mb/*: devicetree: drop now unneeded USBx_PORT_EMPTYMichael Niewöhner
Setting USBx_PORT_EMPTY is not a requirement anymore, since unset devicetree settings default to 0 and the OC pin now only gets set when the USB port is enabled (see CB:45112). Thus, drop the setting from all devicetrees. Change-Id: I899349c49fa7de1c1acdca24994ebe65c01d80c6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-09-06soc/intel: skl,cnl,icl,jsl,tgl: disable usb over-current pin by defaultMichael Niewöhner
Fsp configures the USB over-current pin and overrides the according pad configuration to NF1, regardless of the port being configured as disabled. Thus, set the OC pin to 0xff ("disabled") in this case to prevent this. This allows us to skip setting USBx_PORT_EMPTY in the devicetree for disabled USB ports. Change-Id: Ib8ea2ea26c0623d4db910e487b37255e907b299d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45112 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-05soc/intel/alderlake/bootblock: Do initial SoC commit till bootblockSubrata Banik
List of changes: 1. Add required SoC programming till bootblock 2. Include only required headers into include/soc 3. Add CPU/PCH/SA EDS document number and chapter number 4. Include ADL-P related DID, BDF Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I204e692fabb84fce297bebee465f4ca624c6fe56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-05mb/system76/lemp9: Don't enable unused USB3 portFelix Singer
Don't configure USB3 port 4 since it's not used. Change-Id: I6919f5ec3a5be53373f2ab75063764287b53baf5 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45105 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Michael Niewöhner
2020-09-04mb/*/Kconfig: Drop redundant 'select CPU_INTEL_HASWELL'Elyes HAOUAS
CPU_INTEL_HASWELL is already selected at nb/intel/haswell/Kconfig. Change-Id: I608286aae72bc740be642a72109472fb235f37bf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-04soc/intel/{jasperlake,tigerlake}/Kconfig: Drop redundant 'select ↵Elyes HAOUAS
CPU_INTEL_COMMON_SMM' CPU_INTEL_COMMON_SMM is set to yes if CPU_INTEL_COMMON at cpu/intel/common/Kconfig. Change-Id: I7c8e1bb6b7c3199a24711b64a6cbba4de190c6d9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-04soc/intel/cnl: Enable HECI3 depending on devicetreeFelix Singer
Currently HECI3 gets enabled by the option Heci3Enabled, but this duplicates the devicetree on/off options. Therefore depend on the devicetree for enablement of the HECI3 controller. All corresponding mainboards were checked if the devicetree configuration matches the Heci3Enabled setting, and divergent devicetrees were adjusted. Change-Id: Ic7d52096aee225c2ced1e1bc29ca850fe5073edc Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44579 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-04mb/google/volteer/variant/lindar: Update memory settingsRasheed Hsueh
Based on the Lindar's schematic, generate memory settings. util: rename lp4x spds to include "lp4x-" in name BUG=b:161089195 TEST=FW_NAME=lindar emerge-volteer coreboot chromeos-bootimage Signed-off-by: Rasheed Hsueh <rasheed.hsueh@lcfc.corp-partner.google.com> Change-Id: I1ec35d62f8ed21356329b78a614114edad78c2bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Michael Niewöhner
2020-09-04soc/intel/tigerlake: Remove unused PID_SDX macroSubrata Banik
Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I177a146643f2196018182502fff8d82830e139dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/45019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-03soc/amd/picasso/acpi: Remove padding in IVRS table caused by realignment.Jason Glenesk
Previous CL (1916f8969b10e27fe06b3e0eb1caae632bd947f6) misinterpreted spec as requiring size alignment on all IVHD device entries. The correct requirement specifies only for 4-byte entries. The unneeded realignments result in gaps in the table. The kernel hangs in early boot due to the malformed table. Remove 8-byte entry alignment. BUG=b:166519072 TEST=Boot fully to morphius board with and without amd_iommu kernel parameter. Confirm IVRS contains no alignment gaps/corruption. Change-Id: Iddcff98279be1d910936b13391dd2448a3bb2d74 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-09-03soc/amd/picasso: Set max_speed_mts and configured_speed_mtsRob Barnes
ddr_frequency is deprecated. Set max_speed_mts and configured_speed_mts instead. This will result in SMBIOS type 17 displaying more accurate speed information. BUG=b:167218112 TEST=Boot ezkinil and observe dmidecode -t17 dmidecode -t17 # dmidecode 3.2 Getting SMBIOS data from sysfs. SMBIOS 3.0 present. Handle 0x000B, DMI type 17, 40 bytes Memory Device Array Handle: 0x000A Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: SODIMM Set: None Locator: Channel-0-DIMM-0 Bank Locator: BANK 0 Type: DDR4 Type Detail: Synchronous Speed: 3200 MT/s Manufacturer: Unknown (0) Serial Number: 00000000 Asset Tag: Not Specified Part Number: MT40A512M16TB-062E:J Rank: 1 Configured Memory Speed: 2400 MT/s Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I1879676ea9436b6d19c768f1b78487a4e179f8d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44984 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-03memory_info: add max_speed_mts and configured_speed_mtsRob Barnes
ddr_frequency is ambiguous and is interpreted differently in several places. Instead of renaming this field, this deprecates it and adds two new fields with unambiguous naming, max_speed_mts and configured_speed_mts. smbios.c falls back to using ddr_frequency when either of these fields are 0. The same value was being used for both configured memory speed and max memory speed in SMBIOS type 17, which is not accurate when configured speed is not the max speed. BUG=b:167218112 TEST=Boot ezkinil, no change to dmidecode -t17 Change-Id: Iaa75401f9fc33642dbdce6c69bd9b20f96d1cc25 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44549 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-03soc/intel/cnl: Allow using the remaining Comet Lake FSPsFelix Singer
To allow using the 3 remaining Comet Lake SoCs, add a new Kconfig option for each of them and configure the paths to FSP header files and FSP binary. Change-Id: I4272a6ee08e19769a8a17c93bb3ce2421be0bbc9 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Michael Niewöhner
2020-09-033rdparty/fsp: Update submodule pointer to current masterFelix Singer
Change-Id: I50bac5a70425495832649e0d6d6e91aad623f25c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-03soc/intel/cnl: Add new Kconfig option which matches its FSPs nameFelix Singer
Since there are 4 different versions of FSPs for the Comet Lake platform, add a new Kconfig option for the currently used SoC being able to differ between the various SoCs and FSPs. The new Kconfig option selects the Comet Lake SoC as base for taking over its specific configuration and is only used for configuring the path to its specific FSP header files and FSP binary. Also, adjust all related mainboards so that their Kconfig selects the new option. For details, please see https://github.com/intel/FSP/tree/master/CometLakeFspBinPkg Built System76/lemp9 with BUILD_TIMELESS=1 before and after this patch and both images are equal. Change-Id: I44b717bb942fbcd359c7a06ef1a0ef4306697f64 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-03mb/google/volteer/variants/volteer: route GPP_F14 via APICAlex Levin
GPP_F14 should be configured to be routed via APIC and not SCI. BUG=b:162528549 TEST=verified on a volteer Change-Id: Ie262ceeaea1c07bcc99e1545f5eb99e0d0dee905 Signed-off-by: Alex Levin <levinale@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44948 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-03soc/amd/picasso: Only build PSP bootloader & verstage into ROMartin Roth
The PSP bootloader and verstage are only used out of the RO region, so don't build them into the RW sections. BUG=None TEST=Build & Boot BRANCH=zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ic7bcb9a6a78926325e80755c010bb047e4a9485c Reviewed-on: https://review.coreboot.org/c/coreboot/+/44990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Eric Peers <epeers@google.com>
2020-09-03soc/amd/picasso: Add config for PSP verstage signing tokenMartin Roth
This allows a platform to specify the location of the signing token for the PSP verstage, and build it into the firmware image. BUG=b:166108929 TEST=Build file into PSP firmware, verify that it's present and has the correct ID. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I182ad9b48a2776ccd29ead0f54cfe14c5bf45560 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Eric Peers <epeers@google.com>
2020-09-03soc/amd/picasso: Allow use of pre-built PSP verstageMartin Roth
To use a signed PSP verstage, we're going to need to build it first, then sign and store the binary. This patch allows the stored (signed) verstage binary to be used. BUG=b:166108929 TEST=Build with existing verstage binary instead of re-building it. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I5cbceca3b75f05c5460190b1c829d1ffaab2c736 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Eric Peers <epeers@google.com>
2020-09-03soc/amd/picasso: Move DRAM end to after transfer bufferJosie Nordrum
Move PSP_SHAREDMEM_DRAM_END after _etransfer_buffer to ensure that the transfer buffer actually lives within the 32KiB that is supported to be transferred. Resulting symbol address change in bootblock.debug file summarized below. BEFORE: 02011000 T _psp_sharedmem_dram 02011000 T _transfer_buffer 02011000 T _transfer_info 02011040 T _etransfer_info 02011040 T _vboot2_work 02014040 T _evboot2_work 02019000 T _epsp_sharedmem_dram 02019000 T _preram_cbmem_console 0201a600 T _epreram_cbmem_console 0201a600 T _timestamp 0201a800 T _etimestamp 0201a800 T _fmap_cache 0201ac52 T _efmap_cache 0201ac52 T _etransfer_buffer AFTER: 02011000 T _psp_sharedmem_dram 02011000 T _transfer_buffer 02011000 T _transfer_info 02011040 T _etransfer_info 02011040 T _vboot2_work 02014040 T _evboot2_work 02014040 T _preram_cbmem_console 02015640 T _epreram_cbmem_console 02015640 T _timestamp 02015840 T _etimestamp 02015840 T _fmap_cache 02015c92 T _efmap_cache 02015c92 T _etransfer_buffer 02019000 T _epsp_sharedmem_dram BUG=b:167243965 BRANCH=None TEST=checked 'cbmem -1' for FMAP error after ec reboot Signed-off-by: Josie Nordrum <josienordrum@google.com> Change-Id: I9b482aced5deb40bd87d19d9c42585d8a6db5fc0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45045 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-03mb/google/zork: update DRAM table for berknipKevin Chiu
Add Dual DDR4 Samsung K4AAG165WA-BCTD 16Gb x 8 BUG=b:165956925 BRANCH=zork TEST=1. gen part id by gen_part_id 2. emerge-zork coreboot Change-Id: Ia21a561e9b89feeccb6509d9280eaf52cfc2f5a3 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-03trogdor: Assert EN_PP3300_HUBJulius Werner
Some Trogdor variants power their USB hub from a PMIC LDO that is already enabled by QcLib, and some have a discrete LDO that is controlled by GPIO_84. For the latter, let's make sure we assert that GPIO on boot. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I9d206cd7154ded3bf179e68c2b1421d0a8ee89f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: mturney mturney <mturney@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-09-03trogdor: Shuffle RAM and SKU ID pins (again)Julius Werner
We're moving a lot of pins around on Trogdor again. For firmware this only affects the RAM and SKU strapping ID pins. Since there are quite a few of the old devices in circulation this time and some people seem to care about mosys RAM information working, let's actually check the board revision and support both cases this time. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: If7728d8ea4b7f6e7ff6721ade90f975f6efd5ddd Reviewed-on: https://review.coreboot.org/c/coreboot/+/44949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-09-02mb/google/puff/var/noibat: Update DPTF parameters for noibatWisley Chen
1. Update paramerters form thermal team. 2. Update PL2 Max/Min to 51W/15W. BUG=b:167494420 BRANCH=puff TEST=build noibat and verified by thermal team. Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: Id96e681e9a990a1a1eaeb22781b1c60a7369118b Reviewed-on: https://review.coreboot.org/c/coreboot/+/45020 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-02mb/google/puff: Update DPTF parameters and TCC offset for faffyDavid Wu
1. Set tcc offset to 5 degree celsius 2. Apply the DPTF parameters receive from the thermal team. 3. Change PL2 min value from 25W to 15W. BUG=b:167477885 BRANCH=puff TEST=build and verify by thermal team Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I68fdefe99cf36a39797c29ad84d08321bb8175f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-09-02mb/*/Kconfig: Drop redundant 'select DRIVERS_INTEL_WIFI'Elyes HAOUAS
DRIVERS_INTEL_WIFI is already set to yes. Change-Id: I09f628a9c1feb8992b6fe7c7ca93c75243ffc0f1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-02Revert "mb/google/volteer/variant/lindar: Update memory settings."Patrick Georgi
This reverts commit 2ad859988b5243411393fdf3116eea281b92b1bb. Reason for revert: broke the build Change-Id: I7e7d917c2e8b698d5c7c3ce0b6d34e80696185f3 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44993 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-02soc/intel/tigerlake: Add mainboard hook for overriding SoC configJes Klinke
TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x BUG=b:154333137 Change-Id: Iff28e4a29fab5c22c410cdc743d0402134c4ac56 Signed-off-by: jbk@chromium.org Reviewed-on: https://review.coreboot.org/c/coreboot/+/44914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-02mb/google/volteer/variant/lindar: Update memory settings.rasheed.hsueh
Based on the Lindar's schematic, generate memory settings. BUG=b:161089195 TEST=FW_NAME=lindar emerge-volteer coreboot chromeos-bootimage Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com> Change-Id: I75fb9254ec7aa40acc2e125f0c4fd31003d28be6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 16:43:53 +0000