Age | Commit message (Collapse) | Author |
|
Now that we have a CONFIG_NO_FMAP_CACHE to completely configure out the
pre-RAM FMAP cache code, there's no point in allowing the region to be
optional anymore. This patch makes the section required by the linker.
If a board doesn't want to provide it, it has to select NO_FMAP_CACHE.
Adding FMAP_CACHE regions to a couple more targets that I think can use
them but I don't know anything about... please yell if one of these is
a bad idea and I should mark them NO_FMAP_CACHE instead.
Change-Id: Ic7d47772ab3abfa7e3a66815c3739d0af071abc2
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
While Merlin Falcon binaries are not available, make it explicit that it's
compiling for Prairie Falcon (it was being surreptitious about it).
Board Padmelon accepts 3 different SOC, just changing some resistors
(soldered or not): Brown Falcon, Prairie Falcon and Merlin Falcon. Code for
Brown Falcon is not currently available.
BUG=None
TEST=Build with prairie falcon.
Change-Id: I1663e4403a32a7d626dd2fa06763f18f4230457e
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Add package and APU selections to mainboards and remove symbols no
longer used in soc//stoneyridge.
Change-Id: I60214b6557bef50358f9ec8f9fcdb7265e04663b
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Make a new Kconfig symbol for using soc//stoneyridge. This code also
supports Prairie Falcon is backward-compatible with Carrizo and Merlin
Falcon.
Although Bettong uses Carrizo, it does not currently rely on stoneyridge
source, so it is unaffected by this change.
Change-Id: I786ca54b0444cbcf36dc428a193006797b01fc09
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
The stoneyridge code inferred that if Merlin Falcon was built but no
Merlin Falcon binaries were present, the intent must be Prairie Falcon.
The two falcons are Embedded variants, and Prairie Falcon falls within
Family 15h Models 70h-7Fh.
Add a Prairie Falcon symbol that can be used explicitely. Drop
HAVE_MERLINFALCON_BINARIES.
Change-Id: I0d3a1bc302760c18c8fe3d57c955e2bb3bd8153a
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Set the default location strings to point to the 3rdparty/amd_blobs
files.
Change-Id: I5426b8de2501ba55843efc1cda4b03bc3768f8cb
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Make the default binaryPI image strings for all stoneyridge-based
APUs depend on USE_AMD_BLOBS. Ensure the build completes without
names, and without images.
Change-Id: I74a38efa2a4ad2f9f12a1f8e7fb8694d0ab9dd1e
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Denary, also known as "decimal" or "base 10," is the standard
number system used around the world. Therefore, make use of it.
Change-Id: Ia22705d7629a322292cfd557add9cfadc649c16c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37537
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
'struct acpi_gpio' and 'struct acpi_irq' require the inclusion
of acpi_device.h. The only reason this wasn't caught previously
is due to the header being included with another driver compiled
first on the one board using it (google/eve).
Change-Id: I987f0ec6f769e550f3421629e0ef0c579a3d12f9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37539
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to the POSIX standard, %p is supposed to print a pointer "as
if by %#x", meaning the "0x" prefix should automatically be prepended.
All other implementations out there (glibc, Linux, even libpayload) do
this, so we should make coreboot match. This patch changes vtxprintf()
accordingly and removes any explicit instances of "0x%p" from existing
format strings.
How to handle zero padding is less clear: the official POSIX definition
above technically says there should be no automatic zero padding, but in
practice most other implementations seem to do it and I assume most
programmers would prefer it. The way chosen here is to always zero-pad
to 32 bits, even on a 64-bit system. The rationale for this is that even
on 64-bit systems, coreboot always avoids using any memory above 4GB for
itself, so in practice all pointers should fit in that range and padding
everything to 64 bits would just hurt readability. Padding it this way
also helps pointers that do exceed 4GB (e.g. prints from MMU config on
some arm64 systems) stand out better from the others.
Change-Id: I0171b52f7288abb40e3fc3c8b874aee14b9bdcd6
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: David Guckian
|
|
Include soc common lpss header file to resolve build error due to
missing soc_lpss_controllers_list declaration.
Also remove console header since it is unused.
Change-Id: I2b2c82fc7592120993bc483d3061803cf75c7335
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37556
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add soc_pmc_etr_addr function definition in tigerlake SOC code.
The function is declared in common soc intel pmc driver.
Change-Id: Icc471b16304c72a9341abdd9797ba3f8d0d3d1bc
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37555
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I25463f1b7b5d8242da3decf3e7a7ca54c699d467
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37554
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fixed value of ACPI_FADT_REV_ACPI_2_0 is replaced by
get_acpi_table_revision().
BUG=N/A
TEST=build
Change-Id: I95b0d886b73f94bc880c0e3e7d512211d2d33e21
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Tuning i2c frequency for dratini:
I2C0: 396 KHz
I2C1: 398 KHz
I2C3: unused
I2C4: 394 KHz
BUG=b:145891557
BRANCH=hatch
TEST=emerge-hatch coreboot chromeos-bootimage
Change-Id: I1431554fbce5f3ce113ef1a934e39448e7ba321c
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37605
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the additional tabs on all lines.
BUG=N/A
TEST=build
Change-Id: I02b1314fe2ae89da3659b198c12df9c30c8a039d
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
SDCARD_CD is defined in onboard.h but required in ASL only, move this
define to dsdt.asl.
Removed the onboard.h file from the ASL files that don use it.
BUG=N/A
TEST=build
Change-Id: I35b75e0ae2e2bc4ce143aaec6df6016774676095
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
File contains header only.
Remove header leaving an empty file.
BUG=N/A
TEST=build
Change-Id: I8b1c6b38bd7936cc7af11c13744325bed23a6e83
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Make code more readable.
Replace 1 by IGD_MEMSIZE_32MB for PcdIgdDvmtS0PreAlloc.
BUG=N/A
TEST=build
Change-Id: I5d84e575935e9e60610e1805e1402f290672b114
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Follow thermal table for first tuning.
BUG=b:144464314
TEST=Built and tested on drallion
Change-Id: I4546622cdc6efb2bf2eb973cfc5c6f22c40cc6ef
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36860
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If40fa38e5b249452a6dacf4a4045b6bd00c27cfa
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This function was removed in CB:33535.
BUG=b:124141368
TEST=make clean && make runtests
BRANCH=none
Change-Id: Ifded75319c92dcbb4befbb3fbecc1cd2df8a9ad0
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
ITE8258_CMD_PORT is used in com_init.c only.
Replace ITE8258_CMD_PORT by fixed value in the c file.
ITE8258_DATA_PORT is removed as this isn't used.
BUG=N/A
TEST=build
Change-Id: I401da3f127db9e65763fd8d115eb274fbadbefbe
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Add Jasperlake SA and PCH IDs
Change-Id: I2c9ec1ee4236184b986d99250f263172c80f7117
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37434
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Add common function to enable PCI MMCONF base address. Use the common
function in stoneyridge bootblock.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I1bb8b22b282584c421a9fffa3322b2a8e406d037
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Location in hudson_lpc_port80() was called conditionally.
Also move hudson_lpc_decode() call after enable_acpimmio_decode_pmXX()
due the change from IO to MMIO using pm_read/write.
Change-Id: I38e94e4b04f0a493052cfd3ffdd0a9c2ac0d07fc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
This change sets TCC offset to 10 for kohaku.
BUG=b:144532818
BRANCH=firmware-hatch-12672.B
TEST=Checked thermal and performance efficiency internally (b:144532818)
Change-Id: Ia4b53de3a53bc39c1cd0f7626ae23d4c11a7a3db
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37587
Reviewed-by: Kane Chen <kane.chen@intel.com>
Reviewed-by: Grace Kao <grace.kao@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCIe root port clock gate is already enabled at i945/early_init.c
Also fix comments when only PCIe root port is enabled.
Change-Id: Ica38529dbdd5cc51b19b426999a1d9f0b678b4f5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37576
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ifdb9943e6362b7f29c2079759ea09d7b3a940993
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37608
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's not selected anywhere anymore. Drop it and set the default for
RELOCATABLE_RAMSTAGE directly.
Change-Id: I580e89525ece39418afeefd6a9d0b89b370ca95f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37577
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: ron minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These boards currently have no build-testing, so they degrade
fast. Apply some of the build-tested changes we know to be
good from pcengines/apu2 to get them a bit closer to using
POSTCAR_STAGE=y.
Change-Id: Ibc9a15ed5e91c6dd857f2dd02e37d0979dd6ae90
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Change-Id: I0646b18e823c52109e0fb62c85726622156172b9
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37385
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I70eabc0b03709409d997ccbe8b8e257d68aec338
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Change-Id: Ifde5d382eb223bd996b9bb909c751e9d5f0a11e5
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37300
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I53e9e1a8381ca51200dc5306eef32442668607a3
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Change-Id: I95dbf55b74deca1e035ee1d042f1549d2583e346
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Change-Id: Ia9367d03b6f97f1eb8c35045fd7bb79e5f45b535
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Change-Id: I90774e22fb7765f44b6cd4fa05b535236b782023
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Change-Id: Ia77f0ce89b2234b9c164bb326d76bef98949832a
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37285
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia321f2b974539ac1684173d767dd9eb64060364a
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
It is an ATX board similar to existing ga-b75* boards. The major
difference is the configuration of pci-e ports on PCH, and on-board
pci-e NIC. (see below)
Tested:
- CPU i5 3570T
- Slotted DIMM 8GiB*4 from Kingston
- usb2 and usb3
- pci and pci-e ports
- sata
- Sound
- S3
- AR8161 NIC connected to 1c.2 with mac address burnt in efuse
- libgfxinit-based graphic init
- NVRAM options for North and South bridges
- tpm 1.2 on lpc (similar to ga-b75m-d3h)
- Linux 4.19.67-2 within Debian GNU/Linux stable, loaded from
SeaBIOS.
Change-Id: I1a969880e4da02abf8ba73aac60ee1296fe0abf2
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ibe99264a82fdea0e185907d2d2d4c57078ef3ae4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This commit is adding a dependency check for the FSP_USE_REPO
config option which so far was not able to deal with IceLake
systems.
Change-Id: I29faa8d3acff5680b611951fc193d33f514dc0d3
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37561
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The name for the CoffeeLake FSP.fd was changed to Fsp.fd.
Therefore the CoffeLake / WhiskeyLake default path was
changed.
Change-Id: I0f51e378fcaacb25392d8940a342fc968c730157
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37564
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch simplifies some GPIO macros by removing redundant code.
Also, for the sake of completeness, add two missing macros.
Change-Id: I838efe8b26f60d3e059f4ce18c116aefbc0b0400
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This commit creates a foob variant for Octopus. The initial settings
override the baseboard was copied from variant phaser.
BUG=b:144890301
BRANCH=octopus
TEST=emerge-octopus coreboot
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: Ibcdda4dd0846612f5e98ab454db7144c1caf0507
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37456
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Marco Chen <marcochen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some return codes were missed when implementing this initially; the vboot
logic can require the system to command the EC to reboot to its RO, switch
RW slots or it can require a poweroff of the SoC. This patch appropriately
handles these return codes.
BUG=b:145768046
BRANCH=firmware-hatch-12672.B
TEST=ODM verified this patch fixes the issues seen.
Change-Id: I2748cf626d49c255cb0274cb336b072dcdf8cded
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change the hex values in the VR configuration tables of the Intel Kaby
Lake RVP boards to the same style that is used in the other mainboards.
Also, correct some numbers in the comment tables that did not match the register values.
The values in the tables haven't changed.
BUG=N/A
TEST=build
Change-Id: I77af544d7d88143e19abedb12a13627779c705c6
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37550
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the SMBIOS system type to detachable for nocturne and
soraka variants, to allow the OS to correctly process events.
Change-Id: Ie0ee5ea6666542c0bca2c264b2ed2e6135b78658
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Because the function is implemented in C, post_code() calls
from cache_as_ram.S and other early assembly entry files may
not currently work for cold boots. Assembly implementation
needs to follow one day.
This effectively removes PORT80 routing from boards with
ROMCC_BOOTBLOCK.
Change-Id: I71aa94b33bd6f65e243724810472a440e98e0750
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|