coreboot - Some coreboot project code with my work

Age	Commit message (Expand)	Author
2014-11-14	tegra124: fix the dangerous VPR write order	Joseph Lo
2014-11-14	tegra124: Add some functions for resetting peripherals.	Gabe Black
2014-11-14	Nyan: Set I2S1 Source to CLK_M	Daisuke Nojiri
2014-11-14	nyan: Move some pinmux and clock/reset configuration to ROM stage.	Gabe Black
2014-11-14	t124: Clean up display init functions	Jimmy Zhang
2014-11-14	blaze: Create a nyan_blaze mainboard, copied from nyan_big	Tom Warren
2014-11-13	AMD Trinity: Update the Trinity SMU Firmware	Zheng Bao
2014-11-13	intel: use crosscompiler readelf, instead of global	Patrick Georgi
2014-11-13	arm: Put assembly functions into separate sections	Julius Werner
2014-11-13	vboot: provide empty vboot_verify_firmware()	Aaron Durbin
2014-11-13	qemu-armv7: Minimal changes to pass compiling qemu-v7 platform.	Hung-Te Lin
2014-11-13	ipq8064: Make timer code compile	Vadim Bendebury
2014-11-13	ipq8064: Configure proper bootblock stack and load address	Vadim Bendebury
2014-11-13	Use sbl blobs from a private location	Vadim Bendebury
2014-11-13	ipq806x: Add support for GPIO operations	Furquan Shaikh
2014-11-13	nyan*: Switching unused pin to GPIO	Neil Chen
2014-11-13	nyan: big: Only delay when and as long as necessary in the PMIC setup code.	Gabe Black
2014-11-13	nyan: big: Set the i2c controller frequencies appropriately.	Gabe Black
2014-11-13	tegra124: Add a macro specifically for configuring the I2C controller clocks.	Gabe Black
2014-11-13	tegra124: Fix some bugs in the clock configuration macros.	Gabe Black
2014-11-13	t124: Skip PLLP init to 408MHz	Jimmy Zhang
2014-11-13	t124: nyan: Enable lock bit on pll	Jimmy Zhang
2014-11-13	Nyan: Set DMA Reserve to 2MB	Daisuke Nojiri
2014-11-13	tegra124: fix OSC initialization on LP0 resume	Andrew Bresticker
2014-11-13	tegra124: fix PLLU parameters	Andrew Bresticker
2014-11-13	nyan: Select the CD570M Tegra124 model.	Gabe Black
2014-11-13	tegra124: Make the PLLX frequency selectable by model.	Gabe Black
2014-11-13	nyan: Update 924MHz BCT w/latest qual'd cfg, use 924 as default speed for 2GB	Tom Warren
2014-11-13	nyan: nyan_big: Mark the address range covering the SRAM as cachable.	Gabe Black
2014-11-13	nyan: Add 4GB bct support	Jimmy Zhang
2014-11-13	nyan: big: Check dram_end when setting up caching in ROM stage.	Gabe Black
2014-11-13	vendorcode/amd/agesa/f1{0,2,4,5}: Typo in header guard	Edward O'Callaghan
2014-11-12	ipq806x: Typecast address to void * in read/write operations	Furquan Shaikh
2014-11-12	ipq806x: Add an include/ folder to ipq806x	Furquan Shaikh
2014-11-12	gm45: Don't crash if less than 4G of RAM are present.	Vladimir Serbinenko
2014-11-12	Copy u-boot sources as is and modify the tree to still build	Vadim Bendebury
2014-11-12	Include IPQ8064 SBLs code in the coreboot bootblock	Vadim Bendebury
2014-11-12	tegra124: enable JTAG in Security Mode	Jimmy Zhang
2014-11-12	tegra124: Program PWM1 to drive panel backlight	Andrew Chew
2014-11-12	tegra124: Port a PWM clocking change to big.	Gabe Black
2014-11-12	tegra124: Add pwm_controller registers	Andrew Chew
2014-11-12	tegra124: Enable PWM clock, and set up PWM1 pin	Andrew Chew
2014-11-12	tegra124: Fix PWM pinmux functions	Andrew Chew
2014-11-12	tegra124: Add PWM base address	Andrew Chew
2014-11-12	src/lib/Makefile.inc: Allow rmodules to link under Clang	Edward O'Callaghan
2014-11-12	src/lib/rmodule.ld: DISCARD (.note\|.note.*) sections	Edward O'Callaghan
2014-11-12	tegra124: nyan: Keep in memory structures below 4GB.	Gabe Black
2014-11-12	nyan: Use asm volatile instead of plain asm so it doesn't get optimized out.	Gabe Black
2014-11-11	AMD Kabini: Update SMU firmware from 0.4 to 0.9	Zheng Bao
2014-11-11	asus/f2a85-m: Disable SD controller	Tobias Diedrich