summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-10-17lenovo/t520: Apply ME workaround for S3 resumeNicolas Reinecke
Without this patch the laptop powers down after resume. Change-Id: Ic6486fd4c4cc55b1ac5695f9d6d83fc2193b7eba Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/7102 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-10-17lenovo/t520: fix board infoNicolas Reinecke
Change-Id: Ieeefbe4617ea6c131236d8c94e9990f7b797192b Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/7103 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-10-17asus/m5a88-v: Fix southbridge initKyösti Mälkki
This amdfam10 board was by mistake modified with commit b6f3da4 AGESA CIMx: Move late init out of get_bus_conf() Change-Id: I8edf6f7f4cc635d31e7e485e3f6de57ef8ed7b1e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7104 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-10-17lenovo/t520: Use native LVDS gfx initNicolas Reinecke
As introduced in: 1783a3c ivybridge: LVDS gfx init. The panel on the T520 is a LP156WD1 40 pin LVDS (2 ch, 6-bit). Tx parameters derived from datasheet table. Change-Id: Ib733836e3233a7f14a79f36a27ed36b638e837f5 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/7100 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-10-17lenovo/T520: Remove butterfly DSP init.Nicolas Reinecke
It's specific to butterfly. Doesn't do anything on lenovos. Change-Id: I98b7c3199de5d8515bd869936e1b95847321d264 Signed-off-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-on: http://review.coreboot.org/7099 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-10-17Fix ICH spi implementation which reads data from different chips.Philipp Deppenwiese
This patch adjusts the read timeout in order to support flash chips which needs more than 60ms to complete a spi command. This problem can be reproduced on a Thinkpad T520 with M25PX64 spi chip ( suspend to ram bug ). Change-Id: I22b2e59f1855ead6162a292b83b9b854b55c0235 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: http://review.coreboot.org/7105 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-10-17macbook21: Kill empty gpe.aslVladimir Serbinenko
Change-Id: I4ed04ecbc9e11200577cc2b6ede0e05af9f346fa Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7082 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-10-17macbook21: Kill empty Makefile.incVladimir Serbinenko
Change-Id: I2d946b9d757cc6158ff7f8927a81d7bf03a2e062 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7084 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-10-17Kconfig: move SMBIOS related options to SMBIOS table optionStefan Reinauer
Change-Id: I74943d0248f49796b9d31d6ed827c69f8cea13a5 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/7090 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-17macbook21: Kill empty smi.hVladimir Serbinenko
Change-Id: I387bb6154fe432ef2fc5f92faca69e67d7a6370a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7083 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-10-17Kconfig: clean up options in top level and device menuStefan Reinauer
Move generic options to the "General Setup" menu. Move device specific options to the "Devices" menu. Change-Id: I514a021305d43f026b24fd3016477300700ed401 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/7089 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-17bd82x6x: Consolidate common GNVS initVladimir Serbinenko
Change-Id: Iea035f80695623e4e8d53eea7e3ec294d868fb5b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7053 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-17macbook21: Kill empty mainboard.aslVladimir Serbinenko
Change-Id: I29c7d367df7d1ce911f6cd7ed5e5c56865b41dcc Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7063 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-10-17drivers/spi: Add support for Micron N25Q128Scott Radcliffe
Support added for Micron N25Q128 SPI flash, which has the same manufacturer id as ST Micro. Jedec ID = 0x20 0xBB 0x18. Since existing stmicro.c only compares the last device id byte, this flash is mistakenly identified as M25P128, which has ID = 0x20 0x20 0x18. To handle this situation and avoid breaking code for existing devices, a two byte .id member is added. New devices should be added to the beginning of the flash table array with .idcode = STM_ID_USE_ALT_ID and .id = the two byte jedec device id. A 4KB subsector erase capability is added and used for this new device. It requires using a different SPI op-code supported by adding .op_erase member. Previous devices defined in stmicro.c are assigned their original op-code for 64KB sector erase. N25Q128 is now working on a custom designed Bayley Bay based board. Tested by verifying the MRC fastboot cache is successfully (re)written. Note that previous devices were not retested. Change-Id: Ic63d86958bf8d301898a157b435f549a0dd9893c Signed-off-by: Scott Radcliffe <sradcliffe@microind.com> Reviewed-on: http://review.coreboot.org/7077 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2014-10-17bd82x6x: Consolidate early native USB initVladimir Serbinenko
Change-Id: I6189930fd3c69c3497e4cf1a78035e6614761b13 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6923 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-10-17Add board_info for all Google/Intel boards mitting the fileStefan Reinauer
Change-Id: Iac53462ab3621d96ba15e2fde2800212584246db Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/7072 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-10-17acpi_add_ssdt_pstates: Remove function.Vladimir Serbinenko
Nowhere in database p_state_num is set. So this whole function ends up being a noop. Moreover the offsets used by it are wrong with any optimizing iasl. Remove it in preparation of move to per-device ACPI. Change-Id: I1f1f9743565aa8f0b8fca472ad4cb6d7542fcecb Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7012 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-10-17xe7501devkit: Kill unused cmos.layoutVladimir Serbinenko
Change-Id: I04b485945a1830deaf5a695507ea81809edbceeb Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7073 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-10-17Fix mismerge of ACPI patchesVladimir Serbinenko
Change-Id: I2a9960861465f4686113213d5e5793333b6274b2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7079 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-16smbios: Mark laptops as suchVladimir Serbinenko
Change-Id: I179a4cede2f826f72a400208748798737216c01a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7071 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-10-16uarts: 32/64 cleanupRonald G. Minnich
We had lots of casts that caused warnings when compiling on RISCV. Clean them up. Change-Id: I46fcb33147ad6bf75e49ebfdfa05990e8c7ae4eb Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7066 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-10-16lib/cbfs: more cleanup for 32/64 issuesRonald G. Minnich
Change-Id: I5499a99cec82b464c5146cfc2008d683d079b23a Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7068 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-10-16cbmem: 64/32 cleanupRonald G. Minnich
Change-Id: I4b55b635cc233a9d48b284623399277d941b0d5a Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7069 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-10-16qemu-armv7: 32/64Ronald G. Minnich
This really is not critical but we might as well get it right. Change-Id: Ifec1e8dc35d7f5bb89d9a7a877d82410c83a3288 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7070 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-10-16x220, x230: Remove unused headers.Vladimir Serbinenko
Change-Id: Ia85e3b588c0e255e5c0f77114f051130596ce8d5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6922 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-16bd82x6x: Move common bd82x6x S3 detect to bd82x6x code.Vladimir Serbinenko
Change-Id: I9ba1fa5f9ad38cb619466c6199eacd219bc53281 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6921 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-16sandybridge: Move common northbridge finalize to northbridge code.Vladimir Serbinenko
Change-Id: I6d4178e5aaffc1330b0953b0601bf6b448250a8e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6920 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-16lenovo/{x2,t5}{2,3}0: Remove butterfly DSP init.Vladimir Serbinenko
It's specific to butterfly. Doesn't do anything on lenovos. Change-Id: I7b607196733225eace0f5e70b4cc02651488aa74 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6841 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-16amdk8: Move to per-device ACPIVladimir Serbinenko
Change-Id: I485791015aa7eaabba53813945c216f5725554b1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6948 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-10-16ACPI: Remove CONFIG_GENERATE_ACPI_TABLESVladimir Serbinenko
As currently many systems would be barely functional without ACPI, always generate ACPI tables if supported. Change-Id: I372dbd03101030c904dab153552a1291f3b63518 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4609 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-10-15i945: Convert to per-device ACPIVladimir Serbinenko
Change-Id: Iee3ee33ca58b8c722d2d38aae31e7130032512ad Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6804 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-10-15gm45: Convert to per-device ACPIVladimir Serbinenko
Change-Id: Ib04b03b2dc2ad3bfa886b43df9dd6518bbb46e3f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6803 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-10-14intel/fsp_baytrail: Add padding so device_nvs location matches ACPIScott Radcliffe
The offset of the device_nvs in the gnvs struct is expected to be 0x1000. It is actually 0x100 so padding is needed to move device_nvs to the expected location. ACPI references to device_nvs objects will be correct with the padding. This was tested using a Micro Industries customized Baytrail-I board based on the Intel Bayley Bay CRB. In intel/baytrail/nvs.h, there's a Google customized structure located at 0x0100-0x0FFF that is removed from the fsp_baytrail/nvs.h which explains the mismatch here. Change-Id: I4721a79b53b5b3345ff9b0c053bdd31d2cf9cb61 Signed-off-by: Scott Radcliffe <sradcliffe@microind.com> Reviewed-on: http://review.coreboot.org/7038 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-10-14baytrail: Add padding to the end of device_nvs to match ACPIScott Radcliffe
ACPI globalnvs.asl expects the gnvs memory area size to be 0x2000. Padding has been added to device_nvs struct to reserve the full 0x2000 bytes for gnvs usage. No known issues are caused by having the GNVS area shorter than what ACPI thinks. Since there's nothing defined in this area, O/S shouldn't try to access it. Only problem might be if O/S notices the SSDT is located within the GNVS defined area. I verified that the next table written to memory (SSDT) is 0x2000 past GNVS start using a custom-designed Baytrail-I motherboard based on the Intel Bayley Bay CRB. Change-Id: I9792954c7a3403eba6f37d7e53ea4a9ed3a2e4ac Signed-off-by: Scott Radcliffe <sradcliffe@microind.com> Reviewed-on: http://review.coreboot.org/7039 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-10-14intel/fsp_baytrail: Clear the GNVS area prior to fillingScott Radcliffe
Zero out the GNVS area so that uninitialized portions are defined. Tests using Microsoft Windows (XP/7/8) gave a bluescreen bugcheck: A5 (ACPI_BIOS_ERROR) with the first parameter (0x00001000) (ACPI_BIOS_USING_OS_MEMORY). Some ACPI enumerated devices use the GNVS area to define whether they're enabled and their MMIO regions. On my custom baytrail-based board and build, these devices were disabled but GNVS had uninitialized data indicating the devices were enabled with improper MMIO regions. Should investigate further to see where the GNVS device values are set if enabled and make sure they're set to valid values even when the devices are disabled via the mainboard/devicetree.cb. Change-Id: I2b575c65bfaab58ae6206ac6f457c259c27a7d97 Signed-off-by: Scott Radcliffe <sradcliffe@microind.com> Reviewed-on: http://review.coreboot.org/7040 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-10-11acpi: Don't add an empty SSDT.Vladimir Serbinenko
It's harmless but useless. Change-Id: Iaaa5f6933d120a2071b2e32e62e36e63afa96be3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7043 Reviewed-by: Aaron Durbin <adurbin@gmail.com> Tested-by: build bot (Jenkins)
2014-10-11acpi: Remove explicit pointer tracking in per-device ssdt.Vladimir Serbinenko
It's useless and error-prone. Change-Id: Ie385e147d42b05290ab8c3ca193c5c871306f4ac Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7018 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-10-11bd82x6x, ibexpeak, lynxpoint: Declare NVSA before its use.Vladimir Serbinenko
Windows chokes if it's not the case. Change-Id: I3df15228ed00c3124b8d42fc01d7d63ff3fe07ba Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7017 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-10-11early section: Don't add empty .car.cbmem_console.Vladimir Serbinenko
With handling of this section removed it confused the linker. Change-Id: Id096c1642c0bfed1007a4b7d7dfa89f8b4ffcae1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7042 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-10-10via/epia-m: Switch to per-device ACPIVladimir Serbinenko
Change-Id: Ic63fc1f933fff5cd58adcd4299c4ac2a62c4bb68 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6941 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-10-10lynxpoint: Change OEM table ID for serialio.Vladimir Serbinenko
According to ACPI spec all SSDTs should have distinct OEM table ID. We end up with 2 SSDTs named "COREBOOT". Fix this. Change-Id: I01bccb72758baf51c6b4263778716f4bb9d438c9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7016 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-10-10bd82x6x, ibexpeak, lynxpoint: Ensure 0-filling of uninited GNVS vars.Vladimir Serbinenko
Change-Id: I672c3ca9e7f30a21330cf1920a25b1ab38b3f282 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7015 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-10-10acpi_create_mcfg_mmconfig: Zero-out the structure before filling.Vladimir Serbinenko
Otherwise "reserved" fields end up with a garbage instead of predictable value. Change-Id: I8a036769a8f86f1d6752651601de2800f4f1bd00 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7014 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-10-09intel/fsp_baytrail: Include header for "southcluster_smm_save_gpio_route"Kayalvizhi Dhandapani
Fix the error 'implicit declaration of function "southcluster_smm_save_gpio_route"', when SMM module is added. Change-Id: Ia050ab7e2b036541537b645d3fe4dc747cd1dff8 Signed-off-by: Kayalvizhi Dhandapani <kayalvizhid@ami.com> Reviewed-on: http://review.coreboot.org/7024 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-10-09intel/fsp_baytrail: fix error "unknown type device_t", when SMM Module addedKayalvizhi Dhandapani
Change-Id: I6d8622c7f343619b915442d8056aa6672dfc4f6e Signed-off-by: Kayalvizhi Dhandapani <kayalvizhid@ami.com> Reviewed-on: http://review.coreboot.org/7025 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-10-09intel/fsp_baytrail: Fix SMM/SMIKayalvizhi Dhandapani
With SMM enabled the boot stopped while patching up global NVS in DSDT. The cause is that both CPUs are assigned the same SMBASE address. So update the "cpu_smm_do_relocation()" function so that each CPU gets a different SMBASE address Based on rmodule work that wasn't propagated to the FSP version: commit 3eb8eb7eba55cdfd64c8d50181ea066526ff6485 Change-Id: I77cd27d3a4f207411a689b5be572b4406a03f16b Signed-off-by: Kayalvizhi Dhandapani <kayalvizhid@ami.com> Reviewed-on: http://review.coreboot.org/7026 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2014-10-09AGESA stub 00730F01: Add config.h and kconfig.h to Makefile.incBruce Griffith
The static library builder for the stub that interfaces to the AGESA binary does not include config.h and kconfig.h, so any header file changes that depend on Kconfig variables fail. Force these two system headers to be included in the build of any AGESA stub files. Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Change-Id: I2e8d38fa5aa21cc31b995ee3abe68ab3c3c55a68 Reviewed-on: http://review.coreboot.org/6979 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins)
2014-10-07edid: Relax EDID 1.3 requirements.Hung-Te Lin
In E-EDID (EDID v1.3), Monitor Name (0xfc) and Monitor Range Limits (0xfd) are always required. However, some panels do not really have these fields. As a workaround (and since we don't really use these fields), we only print warning messages for that case. Change-Id: I81b1db7d7f6c6f9320a862608dec4c7be298d7db Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/193742 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit c633215ef8342664d9a4478e821fc8aad368b7f3) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/7009 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-10-07cbmem console: Locate the preram console with a symbol instead of a section.Gabe Black
On non-x86 systems, the location of the preram CBMEM console may not be in a predictable place relative to other things in the linker script. That makes it difficult to work with as its own section because the linker will complain if you try to move backwards as it lays out memory. If the console header is treated as an actual blob of memory which has to be put in the image, we'd have to predict where to put it so that it isn't before something with a lower address or after something with a higher address. Symbols, on the other hand, can be defined arbitrarily. Change-Id: I3257b981eee0c15bb997a9f2c55a03494c6ec6f0 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/193164 Reviewed-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit a492761c27076bcac080013d509ae4aafd6dc3e3) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/7013 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-10-07gen: Add "assert" in assert.h.Hung-Te Lin
Typically assert.h should provide assert(). Change-Id: I465f4a616b212f7b00d445c575866b13eecfa6fb Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/187410 Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 3990584ac8e1ec9b3838bd9dfdf8a9cb2d20fbd0) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6961 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 10:39:05 +0000