summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2016-12-23spi: Get rid of SPI_ATOMIC_SEQUENCINGFurquan Shaikh
SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with the ability to perform tx and rx of flash command and response at the same time. Instead of introducing this notion at SPI flash driver layer, clean up the interface to SPI used by flash. Flash uses a command-response kind of communication. Thus, even though SPI is duplex, flash command needs to be sent out on SPI bus and then flash response should be received on the bus. Some specialized x86 flash controllers are capable of handling command and response in a single transaction. In order to support all the varied cases: 1. Add spi_xfer_vector that takes as input a vector of SPI operations and calls back into SPI controller driver to process these operations. 2. In order to accomodate flash command-response model, use two vectors while calling into spi_xfer_vector -- one with dout set to non-NULL(command) and other with din set to non-NULL(response). 3. For specialized SPI flash controllers combine two successive vectors if the transactions look like a command-response pair. 4. Provide helper functions for common cases like supporting only 2 vectors at a time, supporting n vectors at a time, default vector operation to cycle through all SPI op vectors one by one. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17681 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-23soc/intel/skylake: Use the new SPI driver interfaceFurquan Shaikh
1. Define controller for fast SPI. 2. Separate out functions that are specific to SPI and flash controller in different files. BUG=chrome-os-partner:59832 BRANCh=None TEST=Compiles successfully for chell and eve. Change-Id: I2fe0ef937297297339d4ea19dc37d3061caaa80c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17933 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-22Add/Combine Broadwell Chromebooks using variant board schemeMatt DeVillier
Combine existing boards google/auron_paine and google/samus with new ChromeOS devices auron_yuna, gandof and lulu, using their common reference board (auron) as a base. Chromium sources used: firmware-yuna-6301.59.B 6ed8b9d [CHERRY-PICK: broadwell: Update to...] firmware-gandof-6301.155.B 666f34f [gandof: modify power limiting for...] firmware-lulu-6301.136.B 8811714 [lulu: update RAMID table] Additionally, some minor cleanup/changes were made: - I2C devices set to use level (vs edge) interrupt triggering - HDA verb entries use simplified macro entry format - correct FADT table header version - remove unused ACPI device entries / .asl file(s) - clean up ACPI code (e.g., trackpad on Lulu) - adjust _CID for trackpad on Lulu in order to not load non-functional Windows driver (does not affect Linux) - remove unused header includes (multiple/various) - correct I2C addresses used for SMBIOS device entries - correct misc typos etc The existing auron_paine samus boards are removed. Variant setup modeled after google/slippy Change-Id: I53436878d141715eb18b8ea5043d71e6e8728fe8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17917 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-22Combine Broadwell Chromeboxes using variant board schemeMatt DeVillier
Combine existing boards google/guado, rikku, and tidus using their common reference board google/jecht as a base. Additional changes besides simple consolidation include: - simplify power LED functions - simplify HDA verb definitions using azelia macros - use common SoC functions to generate FADT table - correct FADT table header version - remove unused haswell_pci_irqs.asl - remove unused header includes (various) - set sane default fan speed (0x4d) for all variants Variant setup modeled after google/beltino Change-Id: I77a2dffe9601734916a33fd04ead98016ad0bc4b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17913 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-22mb/asus/p5gc-mx: Add mainboardArthur Heymans
Tested to work: * GPU (Nvidia gt210) in PCIe x16 slot; * SATA; * serial; * 800MHz and 1067MHz FSB Core 2 Duo CPUs; * ethernet; * native VGA graphic init. What does not work: * resume from s3 suspend; * superio hardware monitor (not initialised in coreboot). Quirks: * does not boot with just one dimm in slot B. Change-Id: Ide5494be7f2f16d6b5cfd2ccf4ec438f0587add5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17558 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-12-22agesa and binaryPI mainboards: Fix devicetree hudson commentsMarshall Dawson
Make the ending comment associated with "chip ...hudson" match the appropriate directory name. Change-Id: I5e0d6d41a2e3f963760aad08ed6108acac5b66b3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17904 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-12-21soc/intel/apollolake: allow ApolloLake SoC to use FSP CAR InitBrenton Dong
FSP v2.0 Driver supports TempRamInit & TempRamExit APIs to initialize & tear down Cache-As-Ram. Add TempRamInit & TempRamExit usage to ApolloLake SoC when CONFIG_FSP_CAR is enabled. Verified on Intel Leaf Hill CRB and confirmed that Cache-As-Ram is correctly set up and torn down using the FSP v2.0 APIs without coreboot implementation of CAR init/teardown. Change-Id: Ifd6fe8398ea147a5fb8c60076b93205bb94b1f25 Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/17063 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-21drivers/intel/fsp2_0: add FSP TempRamInit & TempRamExit API supportBrenton Dong
FSP v2.0 Specification adds APIs TempRamInit & TempRamExit for Cache-As-Ram initialization and teardown. Add fsp2_0 driver support for TempRamInit & TempRamExit APIs. Verified on Intel Leaf Hill CRB and confirmed that Cache-As-Ram is correctly set up and torn down using the FSP v2.0 APIs without coreboot implementation of CAR init/teardown. Change-Id: I482ff580e1b5251a8214fe2e3d2d38bd5f3e3ed2 Signed-off-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-on: https://review.coreboot.org/17062 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-21nb/i945/early_init.c: Add FSB800 and 1067 to Egress Port Virtual ChannelElyes HAOUAS
Values based on vendor bios and suggested by Arthur Heymans for FSB1067. FSB1067: The ratio 1067/800 is proportional to the ratio of EPBAR32(0x2c) bits: 0x1a / 0x14 ~ 1067/800 EPVC1IST: The ratio is also proportional to FSB ratios: 0x9c / 0xf0 ~ 533/800. Change-Id: Ib90e8ea1b82f2fcc3b5c199cace32a7f0aff4b5c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17198 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-12-20mb/google/slippy: Hook up libgfxinitArthur Heymans
Both HDMI and eDP work (simultaneously). TESTED on Acer C720 (peppy). Change-Id: Ifc4e3c187bcabd8965d9586237a52b440bfa7f20 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17916 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-12-20nb/intel/haswell: Hook up libgfxinitArthur Heymans
Change-Id: I55e2d99b3f9929703f34d268f4490f3c5c2c766f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17915 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-20mb/lenovo/x60: Remove PCI reset code from romstagePaul Menzel
Commit bf264e94 (i945:) adds a PCI reset to the romstage, and commit bc8613ec (Fix i945 based boards) fixes that to use the correct delay of 200 ms. This code was then copied over, when adding support for the Lenovo X60. The reset was related to the shipped crypto card on the Roda RK886EX and Kontron 986LCD-M, so is not needed on the Lenovo X60. So remove it. TEST=Build and boot on Lenovo X60t. Change-Id: Ia37d9f0ecf5655531616edb20b53757d5d47b42f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17703 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-20google/eve: Fix configuration of some GPIOsDuncan Laurie
GPP_D12 needs an internal pull-up to get this rail working on current boards. GPP_D0-GPP_D3 were changed from SPI interface and I just missed this change earlier. BUG=chrome-os-partner:58666 TEST=test camera and touchpad on eve Change-Id: Idfa186f2930afbe5651f4e0fc11a19cd0dd4295f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17922 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-20riscv: enable counters via m[us]counterenRonald G. Minnich
The user and supervisor counters could not be safely enabled before as the register numbers were not finalized. Now that everyone agrees, we can enable them. Until we are sure the toolchains are caught up, we use the hardcode name with the register names in comments. As soon as toolchains settle down we'll do one more pass and convert to the symbolic names. Tested on lowrisc bitstream and SPIKE simulator. Change-Id: I21fe5cac44fafe4b7806e004c179aa27541be4b6 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17920 Tested-by: build bot (Jenkins) Reviewed-by: Alex Bradbury <asb@lowrisc.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Andrew Waterman <aswaterman@gmail.com>
2016-12-19drivers/spi: fix flash writes at page boundariesAaron Durbin
There was an assumption that all SPI controllers could consume a full page of data to write. However, that assumption doesn't hold when spi_crop_chunk() indicates sizes smaller than page size. If the requested offset isn't page aligned from the start then writes will fail corrupting data since a page boundary isn't honored. The spansion driver needed quite a bit more work to honor the spi_crop_chunk() result. It now mimics the other driver's code. Also, needed to add spi_crop_chunk() to marvell/bg4cd SoC to make google/cosmos build. SPI obviously doesn't work on that platform, but it fixes the build error. Change-Id: I93e24a5a717adcee45a017c164bd960f4592ad50 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17910 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-12-19google/poppy: Add new boardFurquan Shaikh
Add poppy board files using kabylake and FSP 2.0. BUG=chrome-os-partner:60713 BRANCH=None TEST=Compiles successfully Change-Id: Ic9aa5093b319690ae893a21cab98d9b843000e6c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17866 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-12-19amd/mainboard: Clean up bettong, gardenia USB todosMarshall Dawson
An incorrect board name was propagated over various generations of mainboards. Correct the comments for these. Addressing the todo items will come in a later patch. Change-Id: I4abd028fee5087955a7b6ba8d38f99c8207d24b4 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17903 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2016-12-19motherboard/amd: Clean up bettong, gardenia makefilesMarshall Dawson
Declutter the conditional building of fchec.c. Use the CONFIG setting directly instead of ifeq (). Change-Id: I6d3721764e66e5615a639c1979d60ff1291b5d33 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17902 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2016-12-19amd/gardenia: Update ACPI routingMarshall Dawson
Reduce the Bettong devices and match up the comments to the northbridge. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from e7c38571be6406453640d671210b2074a91f162e) Change-Id: I53adff741f5cf2bd75c37421949bd30f214f5692 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17849 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-19drivers/intel/gma: Use scaling to simplify fb configNico Huber
Utilize libgfxinit's support for scaling to simplify the framebuffer configuration. In case of multiple displays of different resolutions, we had configured one framebuffer big enough for their union, each display only showing its respective upper left window. Instead, we use the smallest resolution now and show the whole image on all displays. Change-Id: I70a9d92f88ef891703829945264f94ac7eff09b0 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17492 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2016-12-19drivers/intel/gma: Add textmode support with libgfxinitNico Huber
Add an alternative gfxinit implementation for textmode. The legacy VGA plane and textmode is configured through coreboot provided functions. libgfxinit uses this plane as alternative to the usual high resolution plane. Change-Id: Iad0754c50fc6faec35f49583fe1c7cb50ac6c0c5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17279 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-12-19pcengines/apu2: add board supportPiotr Król
Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-12-19amd/gardenia: Add AHB bridge registers in ACPIMarshall Dawson
Add the region used by the A-Link to AHB configuration registers. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (squashed from 2c8dafdf44cf1a84cbc25e8aa381c04c160ee705 and 3c755f70ffa36c0fc92a1da0e3f5f877c8dc9e8b) Change-Id: I7398452c6e70b4545e16398f3fec157f2f30293a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17848 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-19amd/gardenia: Add I2C devices to ACPIMarshall Dawson
Add the missing two I2C controllers. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from 0be00a96b9eb40c959a422a5ca4773d2353d244d) Change-Id: I3ea74a6c0472711102b19a7ca0209aaeeeb2d601 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17847 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-19amd/gardenia: Clean up GPIO ASLMarshall Dawson
Remove the unused Name field. Its previous design generates an FWTS error and a recommendation for changing it to Serialized. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 1d970f1aa16c647e56a08c83f5719041882a2fc0) Change-Id: I27748a4f84286e80043f516564ef64350ef3fef9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17846 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-18ti/beaglebone: Define arch for omap-header buildKyösti Mälkki
Required to add rules.h as default include, otherwise we get error: ./src/include/rules.h:128:5: error: "__COREBOOT_ARM_ARCH__" is not defined [-Werror=undef] Previously, rules.h was not included in omap-header build at all. Change-Id: I75265916856f2f21f7966619ea65d63acd599e2f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17746 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-18AMD binaryPI: Promote rules.h to default includeKyösti Mälkki
Also remove config.h, kconfig.h will pull that one in. Change-Id: I798b3ffcf86fca19ae4b0103bb901a69db734141 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17667 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-18intel/fsp_rangeley: Fix use of __SIMPLE_DEVICE__Kyösti Mälkki
Required fix to have rules.h as default include. Change-Id: I6ce2d4e13de5139a84c709b5836ecd41c0abc836 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17747 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-18intel cache-as-ram: Move DCACHE_RAM_BASEKyösti Mälkki
Having same memory region set as both WRPROT and WRBACK using MTRRs is undefined behaviour. This could happen if we allow DCACHE_RAM_BASE to be located within CBFS in SPI flash memory and XIP romstage is at the same location. As SPI master by default decodes all of top 16MiB below 4GiB, initial cache-as-ram line fills may have actually read from SPI flash even in the case DCACHE_RAM_BASE was below the nominal 4GiB - ROM_SIZE. There are no reasons to have this as board-specific setting. Change-Id: I2cce80731ede2e7f78197d9b0c77c7e9957a81b5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17806 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-18intel/i82801ix: Add HAVE_INTEL_FIRMWAREKyösti Mälkki
Select this to provide menu in menuconfig to add flash descriptor file. ME or GbE firmwares themselves are not required, but integrated NIC MAC and SPI configuration fields are still useful. Change-Id: I14b86e2f38ec39924d2cbf0932d82f66ed356a03 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17805 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-18emulation/qemu-q35: Increase default ROM_SIZEKyösti Mälkki
Larger size fits GRUB payload and fixes case to build 82801ix with HAVE_INTEL_FIRMWARE. Change-Id: I90e33fb3a0b0e1a60dcc2a9a022bef034f3270d8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17830 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-18ACPI S3: Signal successful bootKyösti Mälkki
Just before jumping to OS wakeup vector do the same tasks to signal coreboot completion that would be done before entry to payload on normal boot path. Change-Id: I7514c498f40f2d93a4e83a232ef4665f5c21f062 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17794 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-18riscv: Add support for timer interruptsRonald G. Minnich
RISCV requires that timer interrupts be handled in machine mode and delegated as necessary. Also you can only reset the timer interrupt by writing to mtimecmp. Further, you must write a number > mtime, not just != mtime. This rather clumsy situation requires that we write some value into the future into mtimecmp lest we never be able to leave machine mode as the interrupt either is not cleared or instantly reoccurs. This current code is tested and works for harvey (Plan 9) timer interrupts. Change-Id: I8538d5fd8d80d9347773c638f5cbf0da18dc1cae Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17807 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-12-17Revert "arch/x86/smbios: Correct manufacturer ID"Nico Huber
This reverts commit c86da67436827c25919a2f5966049485a58fc984. Alas, I have to disagree with this in every single line. The comment added to the top of the file only applies to a single function therein which sits over a hundred lines below. That's not much helpful. More- over, the link in the comment is already down ofc. The comment is also irritating as it doesn't state in which way (enco- ding!) it applies to the code, which presumably led to the wrong in- terpretation of the IDs. At last, if anything should have changed it is the strings, the IDs are resolved to. `smbios_fill_dimm_manufacturer_from_id()` has to resolve the IDs it gets actually fed and not a random selection from any spec. Since I digged into it, here's why the numbers are correct: The func- tion started with the SPD encoding of DDR3 in mind. There, the lower byte is the number of a "bank" of IDs with an odd-parity in the upper most bit. The upper byte is the ID within the bank. The "correction" was to clear the parity bit for naught. The function was later exten- ded with IDs in the DDR2-SPD encoding (which is actually 64-bit not 16). There, a byte, starting from the lowest, is either an ID below 127 plus odd-parity, or 127 which means look in the next byte/bank. Unused bytes seem to be filled with 0xff, I guess from the 0xff2c. Change-Id: Icdb48e4f2c102f619fbdca856e938e85135cfb18 Reviewed-on: https://review.coreboot.org/17873 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-17nb/x4x: Add other Eaglelake IGD PCI DID to listArthur Heymans
Currently only there is only one eaglelake board in coreboot (ga-g41m-es2l) featuring a G41 variant northbridge. Adding boards with a different variant (Q43, Q45, G43, G45, B43) will require this change for graphic initialisation. Change-Id: Ida32c563a99576b66685dfdadf9a534fd6e197dc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17900 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-17google/reef: Use exported GPIOs and ACPI regulator for touchscreenFurquan Shaikh
ELAN touchscreen device expects firmware to export GPIOs and ACPI regulators for managing power to the device. Thus, provide the required ACPI elements for OS driver to properly manage this device. BUG=chrome-os-partner:60194 BRANCH=None TEST=Verified that touchscreen works properly on boot-up and after suspend/resume. Change-Id: I298ca5de9c0ae302309d87e3dffb65f9be1e882e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17799 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-12-17drivers/regulator: Add driver for handling GPIO-based fixed regulatorFurquan Shaikh
This change adds the required device node in SSDT for defining GPIO-based fixed voltage regulator. BUG=chrome-os-partner:60194 BRANCH=None TEST=Verified that ELAN touchscreen works with exported GPIOs and ACPI regulator. Change-Id: I4380aea0929fb7e81dbe83f940e3e51e983819f9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17798 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-12-16google/eve: Set throttle offset to 10 degreesDuncan Laurie
Set the thermal throttle (prochot) activation to be 10 degrees below TJmax so PROCHOT# kicks in at 90C instead of 100C. BUG=chrome-os-partner:58666 TEST=boot on eve, check msr value before and after resume: > iotools rdmsr 1 0x1a2 0x000000000a6400e6 > echo mem > /sys/power/state > iotools rdmsr 1 0x1a2 0x000000000a6400e6 Change-Id: I3ab3a050a1e27c18a940bd7519eabaf015ef93eb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17901 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-16amd/gardenia: Enable LPC decodesMarshall Dawson
Turn on LPC decoding in romstage. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 5d9dae5a1fdab1bf6c418dc7e6de28069bd342dc) Change-Id: I937eb5c5b6c6a9f7a13ebd0bec7fcc8d789427ce Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17227 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-16amd/gardenia: Enable HD AudioMarshall Dawson
Add ALC286 commands and update the PLATFORM_CONFIGURATION structure with the list address. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 2dd5cd2f01cd37c9eb7dff85e20e446c7d5ab2ee) Change-Id: I037b39a8634bf886f82ed93488f1efbf6661c93f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17226 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-16amd/gardenia: Update PCIe and DDI lanesMarshall Dawson
Change the Carrizo settings used for Bettong to ones specific to Stoney on Gardenia. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit e99b2c7e2c913413fdc83ad37c5519837a38c7fb) Change-Id: I4376421c8c08dab9d7ff1428993eed3978e89657 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17225 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-16amd/gardenia: Enable SATA controllerMarshall Dawson
Duplicate the code from DB-FT3lc and use the correct names. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 935cbe6e8b81f11291322dba3688b0a5a0c3291c) Change-Id: I3a3c62f09819ea02388bf70945fd0c011ad7555a Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17224 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-16amd/gardenia: Update xHCI configurationMarshall Dawson
Remove a duplicated check and setting for xHCI during the AMD_INIT_RESET callout. This is handled by the wrapper. Also remove nearby commented code. EcChannel0 is not a member of FCH_RESET_DATA_BLOCK. Leave the check in AMD_INIT_ENV. Although AGESA honors what was previously requested, additional settings depend on the state of Usb.Xhci0Enable. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit ca862fbacbe80b1345ad6f23262a9769f05c50fd) Change-Id: I45a5123e158cd7399d6d286999371d4a0e0fa963 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17223 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-16amd/gardenia: Configure GPIO signalsMarshall Dawson
Change the default configuration for the following settings: AGPIO14: BT radio disable AGPIO64: NFC PU AGPIO65: NFC wake AGPIO66: Webcam AGPIO69: PCIe presence detect AGPIO70: GPS sleep AGPIO116: MUX for Power Express Eval EGPIO119: SD power Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit d146af183b9dbbd6bd6c7b6ad1b383bf36203da4) Change-Id: Ibbde7593f3477e30a45fd4f56f236c6e94e3725f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17222 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-16amd/gardenia: Remove board ID capabilityMarshall Dawson
Remove the last bit of Bettong board_id checking from Gardenia. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit b617823d1d2860a3f6d766a40ae95e5486739a5c) Change-Id: Ibc56dbbfa1b15b21ebadb9f6c9c54936566a2986 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17221 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-16amd/gardenia: Remove rev-specific storage setupMarshall Dawson
Gardenia doesn't have the ability to modify settings depending on the board ID. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 536b4c424e5259ddbd82469f5f426d3189ff3f89) Change-Id: I2c928431306c669735cf735042855e95721bb107 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17220 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-16amd/gardenia: Correct SPD AGESA calloutMarshall Dawson
Gardenia makes no special considerations for a board_id regarding SPD access and addressing. Remove this from the source and use the standard AGESA call. Make SPD address changes to devicetree.cb. Note that Gardenia is designed to be a two channel, single DIMM/channel system (some SKUs with two DIMMs on the second channel). However, this port is for the Stoney processor which is a single channel. As a result, the second DIMM slot is not usable. A future improvement could involve a port using a different processor, with unique devicetree files for each. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 77511f98f819dfe08c3ed16ebc11e1b328bdca15) Change-Id: Id00c2be83340ceeec043ec86e96779e6bf46ae7b Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17219 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-16mainboard/amd: Copy bettong to gardenia and update for buildMarc Jones
Use bettong as the reference for the gardenia mainboard. Update makefiles etc so it builds. This patch intentionlly keeps the carrizo_fch.asl file to remain synchronized with the AMD PI package. Remove items that do not apply to the Stoney APU, rewrite the comments associated with the PCIe devices, and fix up the SPD register association to match the 00670F00 chip.h. Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit 82accfcf9ec76a042156fb6e528f7900987b6e7e) Change-Id: I014fec5c99c01fc02e129be514b704c8ba27d464 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17218 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-16drivers/pc80/tpm: Set default TPM acpi path if unsetPhilipp Deppenwiese
Enable default acpi path PCI0.LPCB if TPM support is selected in the kconfig system and the acpi path is not set via acpi_name callback in the platform code. Thanks to Aaron Durbin for providing this fix. Change-Id: Idb56cafe71efc8a52eee5a5a663478da99152360 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/17855 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-16nb/intel/sandybridge/raminit: Separate Sandybridge and IvybridgePatrick Rudolph
Add custom files for Sandybridge and IvyBridge functions. Move only the minimal required functions into separate files. Both files' functions are going to call raminit_common functions. No functionality is changed. Sandybridge code path tested on Lenovo T420. Change-Id: I1b1dfbd0857b59d3ae4392b73c033ee7a5aed243 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/17605 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 03:57:39 +0000