| Age | Commit message (Expand) | Author |
|---|
| 2008-05-14 | Check the JEDEC vendor ID for correct parity. Flash chips which can be | Carl-Daniel Hailfinger |
| 2008-05-14 | Add lots of ATMEL SPI flash chips to flash.h. | Carl-Daniel Hailfinger |
| 2008-05-13 | flashrom: Move all IT87xx specific SPI routines from spi.c to a separate | Carl-Daniel Hailfinger |
| 2008-05-13 | flashrom: Move the SPI #defines from spi.c to spi.h | Carl-Daniel Hailfinger |
| 2008-05-13 | Change the SPI parts of flashrom to prepare for a merge of | Carl-Daniel Hailfinger |
| 2008-05-12 | MX25L3205 and W25x40 have been confirmed to probe/read/erase/write OK | Carl-Daniel Hailfinger |
| 2008-05-12 | Add SST39VF512, SST39VF010, SST39VF040 support to flashrom. The SST39LF | Carl-Daniel Hailfinger |
| 2008-05-10 | Improve flashrom SPI abstraction, second step. | Carl-Daniel Hailfinger |
| 2008-05-10 | flashrom: Rename generic_spi_*() functions to spi_*() | Peter Stuge |
| 2008-05-08 | flashrom: Probe for up to 3 flash chips. | Claus Gindhart |
| 2008-05-03 | flashrom: Add a tested bitmap field to the flash chip table. | Peter Stuge |
| 2008-04-29 | flashrom: Enable ROM decode range to 1MB for vt8237r | Bari Ari |
| 2008-04-28 | The generic jedec.c does not work for the ST M50FLW flash | Claus Gindhart |
| 2008-04-28 | flashrom: Handle NULL probe, erase and write function pointers in the | Peter Stuge |
| 2008-04-24 | Flash pages, which where excluded from updating using the exclude or the | Claus Gindhart |
| 2008-04-07 | ST M50FW016 and ST M50FW040 support the 82802ab command set, not jedec. | Ed Swierk |
| 2008-03-18 | Add ICH9 detection to flashrom. Straight from the datasheet, untested. | Carl-Daniel Hailfinger |
| 2008-03-18 | oops. forgot to add the file. | Stefan Reinauer |
| 2008-03-17 | Support for the Winbond W39V080FA series of chips. | Stefan Reinauer |
| 2008-03-16 | check whether SST FWH chip was successfully erased on flashchip -E, too | Stefan Reinauer |
| 2008-03-16 | Sort list of flash chips alphabetically, add comment (trivial). | Uwe Hermann |
| 2008-03-15 | remove nasty warning that happened due to our vendor detection | Stefan Reinauer |
| 2008-03-14 | Re-add code erroneously removed in r3140. | Uwe Hermann |
| 2008-03-14 | Changes M50FW080 to use 82802ab.c instead of jedec.c. This fixes the problem ... | Joseph Smith |
| 2008-03-14 | Prepare for ICH7/ICH8 SPI support by adding some debugging for all | Carl-Daniel Hailfinger |
| 2008-03-14 | Fix broken flashrom build. | Uwe Hermann |
| 2008-03-14 | Fix up one forgotten revert in r3140. | Carl-Daniel Hailfinger |
| 2008-03-14 | Revert the delete of 82802ab.c in r3137. | Carl-Daniel Hailfinger |
| 2008-03-13 | Also print the chip vendor name in --list-supported output (trivial). | Uwe Hermann |
| 2008-03-13 | Also print the required -m option in --list-supported output (trivial). | Uwe Hermann |
| 2008-03-13 | Drop 82802ab.c as it is identical to sharplhf00l04.c. | Carl-Daniel Hailfinger |
| 2008-03-12 | Drop the useless rom.layout file. It's just an example, likely never | Uwe Hermann |
| 2008-03-12 | Add --list-supported option to flashrom which lists the supported | Uwe Hermann |
| 2008-03-04 | Add missing license header to layout.c. The file was written by | Uwe Hermann |
| 2008-02-20 | flashrom: Add board_enable for Artec Group DBE61 and DBE62 | Mart Raudsepp |
| 2008-02-14 | With this small change it is possible to build flashrom again when | Clark Rawlins |
| 2008-02-11 | flashrom: further cleanups to enable_flash_cs5536 | Mart Raudsepp |
| 2008-02-09 | Flashrom: Add board enable for VIA EPIA SP. | Luc Verhaegen |
| 2008-02-08 | Improve error handling and make RCONF_DEFAULT_MSR address be a constant. | Mart Raudsepp |
| 2008-02-08 | This implements support for devices using AMD Geode companion chip | Mart Raudsepp |
| 2008-02-06 | Handle JEDEC JEP106W continuation codes in SPI RDID. Some vendors like | Carl-Daniel Hailfinger |
| 2008-01-27 | Make the vendor name optional in the -m flashrom parameter when there's only | Peter Stuge |
| 2008-01-27 | Forgot to add Spansion S25FL016A to README, trivial. | Peter Stuge |
| 2008-01-26 | Correctly disable the ROM area Write Protect bit in the Geode LX. | Marc Jones |
| 2008-01-25 | Add ids and chip entry for Spansion S25FL016A to flashrom, tested, | Peter Stuge |
| 2008-01-22 | Here is just a little and simple patch to get the MX25L3205D working. | Harald Gutmann |
| 2008-01-22 | Flashrom did not use the read function for verifying, it used direct memory | Carl-Daniel Hailfinger |
| 2008-01-22 | Make sure we delay writing the next byte long enough in SPI byte | Carl-Daniel Hailfinger |
| 2008-01-21 | Omitting the wait for SPI ready when there is no data to be read, e.g. | Ronald Hoogenboom |
| 2008-01-21 | This patch adds version information to flashrom. Because 'v' and 'V' | Bernhard Walle |
