summaryrefslogtreecommitdiff
path: root/util/superiotool
AgeCommit message (Collapse)Author
2017-06-07Use more secure HTTPS URLs for coreboot sitesPaul Menzel
The coreboot sites support HTTPS, and requests over HTTP with SSL are also redirected. So use the more secure URLs, which also saves a request most of the times, as nothing needs to be redirected. Run the command below to replace all occurences. ``` $ git grep -l -E 'http://(www.|review.|)coreboot.org' | xargs sed -i 's,http://\(.*\)coreboot.org,https://\1coreboot.org,g' ``` Change-Id: If53f8b66f1ac72fb1a38fa392b26eade9963c369 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/20034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-06superiotool: Add SMSC KBC1126Iru Cai
Device ID is read from HP Elitebook 2760p. Based on: - superio/smsc/kbc1100 (LDNs, keyboard, EC) - DSDT from OEM firmware (COM1 and mailbox) - Datasheet "KBC1122 Priliminary DS Rev. 0.8" Change-Id: Id172ae42411a6d42a4ae7c7f30f96aeda3e6c384 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/18480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-05-08superiotool: Add registers of LPC47N217Iru Cai
Change-Id: I460663593dc32f5b52c19c3f19fbc35b8252ed4d Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/19606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-03-13util/superiotool: Add support for Fintek F71808ANicola Corna
Default values taken from the datasheet and from the dump of an uninitialized F71808A on a Sapphire Pure Platinum H61. Both the control registers and the HWM configuration registers are added. Change-Id: Ia6e2a7c13a5086d19ebdb426f2f975b43220a273 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18562 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-01-03superiotool: Add support for HWM registers on W83627EHGArthur Heymans
Based on datasheet: "W83627EHF/EF W83627EHG/EG WINBOND LPC I/O, Revision : 1.0" Change-Id: Ia2e5ab8bc454a34a89fe2cf06bfba55261109785 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17457 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03superiotool: Add support for HWM registers on W83627DHGArthur Heymans
Based on datasheet: "W83627DHG WINBOND LPC I/O, Version: 1.4" Change-Id: Id20dff7539d926ef6f68265efbfc7420539d9bca Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17964 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-31superiotool: Add undocumented registers of ITE IT8783E/FNico Huber
Dumping and behavioral analysis have shown that there are more registers in the environment control of the IT8783E/F than documented in my data- sheet. This adds every register that wasn't 0x00/0xff by default. The default values are guesswork: those that looked like sensor readings became NANA, others are taken from dumps. Change-Id: I7e39700c9b98ed5be9f085bc8ffd848006310254 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17005 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-10-31superiotool: Add register definitions for ITE IT8783E/FNico Huber
Values are taken from an unpublished datasheet. With the exception of the default value for register 0x55 in the environment controller space: Looks like this was just documented wrong. The dumped value of 0x50 also makes more sense. Change-Id: I2bd23d30b7158b2e05fcee7c6280df82570d1401 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17004 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-10-31superiotool: Add an alternative dump formatNico Huber
Add new dump format to superiotool that prints each register on a separate line. This should be more suitable for diff'ing dumps of multiple superiotool runs. Change-Id: I226ee82b903bf77e760d3396d02fa50688adb9f2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17003 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-31superiotool: Add Nuvoton NCT6791DOmar Pakker
This adds support for the Nuvoton NCT6791D Super I/O chip to the superiotool. The implementation is based on the Datasheet supplied by Nuvoton: Datasheet Version: January 8th, 2016 Revision 1.11 Datasheet deviation: - Defaults for control registers 0x20 and 0x21 are invalid. Datasheet: 0xc562. Actual: 0xc803. Change-Id: I8ced9738cd41960cbab7b5ea38ff19192d210672 Signed-off-by: Omar Pakker <omarpakker+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/15252 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-26superiotool: Add support for chip NCT6102D / NCT6106DRoberto Muñoz Gómez
Add support for chip NCT6102D / NCT6106D in superiotool Change-Id: I689ff8e796f43a5aac144e9898df750407588b1f Signed-off-by: Roberto Muñoz Gómez <munoz.roberto@gmail.com> Reviewed-on: https://review.coreboot.org/14206 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-04-16util/superiotool: Add initial support for Exar XR28V384.Derek Waldner
Datasheet https://www.exar.com/content/document.ashx?id=21368 Add support for Exar chip used on a custom board that was designed to connect to the Olive Hill Plus development platform. The register dump was verified on the Olive Hill Plus platform. Change-Id: Ibd3e13eefb706bd99b6e5b38634f6855b39848ab Signed-off-by: Derek Waldner <derek.waldner.os@gmail.com> Reviewed-on: https://review.coreboot.org/14367 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-30util/superiotool: Register fix for Fintek F81865F/F-IWilbert Duijvenvoorde
Datasheet: http://www.fintek.com.tw/files/productfiles/F81865_V028P.pdf There is a multi-function select register listed as 0x2a-1 and 0x2a-2. These are the original names in the datasheet, but superiotool will display register 0x29 and 0x28 and their values. This patch renames them both to 0x2a and shows both of the default values for them. They are both 0x00, so one of them could be dropped though. Change-Id: Iad91f9e4755d2d1a123e56ab0fa9257be7ea9978 Signed-off-by: Wilbert Duijvenvoorde <w.a.n.duijvenvoorde@gmail.com> Reviewed-on: https://review.coreboot.org/5404 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-26superiotool: fix out-of-box NetBSD Makefile supportAndrey Korolyov
Add NetBSD-specific locations under pkg/ and missing linker flag for libpciutils. Change-Id: I812817a374aaba561b28d8a22f20d238c9dca32b Signed-off-by: Andrey Korolyov <andrey@xdel.ru> Reviewed-on: https://review.coreboot.org/12830 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-24util: Update makefiles for junit testingMartin Roth
- Have clean remove junit.xml files. - Remove junit.xml target from cbmem makefile - this is in the top level Makefile.inc now. - add distclean targets to makefiles. - Make sure all makefiles have .PHONY set up. - rm commands need -f or they will fail if the file they're trying to remove doesn't exist, causing the build to fail. Change-Id: I2f0635f2c0a9417e3377a90c8d67103323c4a72f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/12120 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-02superiotool: detect the NCT5572DFelix Held
Change-Id: I99717072679a51deecd6934ce7fb4aeb45135cd6 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/10386 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-12-19util/superiotool: change displayed name of chip id 0xc333 (nct6776)Felix Held
nct6776f and nct6776d are just two package variants containing the same die Change-Id: I4d319fa0e791e66ad04857dede2fdfc8e42dd45a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/7806 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-19util/superiotool: fix default values for nct6776 (rev. c)Felix Held
change default values according to the datasheet in revision 1.2 Change-Id: Iec1d55dd7b906a7a41940f3f8e42413922883efd Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: http://review.coreboot.org/7805 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-09utils: Remove references to tracker from manpagesMartin Roth
abuild, inteltool, and superiotool's manpages still referenced reporting bugs to tracker.coreboot.org. Remove that url and change the message to point to the coreboot mailing list instead. Change-Id: I7a85bc2b36ccdb7f3798a39a08345c1a02a67e65 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7712 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-03-27util/superiotool: Add initial support for Fintek F71869ED.Wilbert Duijvenvoorde
Datasheet: http://www.fintek.com.tw/files/productfiles/F71869_V1.1.pdf Practically the same as F71869AD, just another ID (0x1408). Tested on actual hardware, Jetway NC9C-550-LF. Update: Fixed F71869ED based on the proper datasheet: http://www.alldatasheet.com/datasheet-pdf/pdf/459075/FINTEK/F71869ED.html Change-Id: I5da858565ca16ba4d73b47b42fadd31dabbc290b Signed-off-by: Wilbert Duijvenvoorde <w.a.n.duijvenvoorde@gmail.com> Reviewed-on: http://review.coreboot.org/5380 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-03-24util/superiotool: Register fix for Fintek F71869ADWilbert Duijvenvoorde
Fixed F71869AD based on the proper datasheet: http://www.alldatasheet.com/datasheet-pdf/pdf/459074/FINTEK/F71869AD.html Change-Id: If22341551c6a1a9bbae088801a6194f7b5b6bf4d Signed-off-by: Wilbert Duijvenvoorde <w.a.n.duijvenvoorde@gmail.com> Reviewed-on: http://review.coreboot.org/5405 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-01-31utils: Install man pages as non-executable (chmod 644)Lubomir Rintel
This bothers rpmlint. Change-Id: I27d9cfac3ef6834ff87acc5a5ccbf332e59eeb1a Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: http://review.coreboot.org/5075 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-01-27util/superiotool: Add initial support for Fintek F71869AD.Edward O'Callaghan
Change-Id: Ia2ce8214d8b419d0ca0186e6f6b2241097b0847b Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/4802 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-04superiotool: Add dump facility for HWM of W83627DHG-PNico Huber
Change-Id: I9355996a8cf1b7cb91cc415ec04f5108a1cc42a5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3358 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-04superiotool: Add dump facility for ITE IT8516 + I/O 0x20e/fNico Huber
Change-Id: Iaea08b7eb5aac9ff1e0756f1400a82641bb45b14 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3359 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-22superiotool: add CR dump for W83627UHG = NCT6627UDFrank Rysanek
This commit adds "register dump capability" to superiotool for a specific chip by Winbond/Nuvoton: the W83627UHG AKA NCT6627UD (same chip, different package). In other words, it fills in the "CR map" definitions in winbond.c, which so far have been void for this chip. - superiotool r4.0-3976-g190011e Found Winbond W83627UHG = NCT6627UD (id=0xa2, rev=0x32) at 0x2e Register dump: idx 02 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f val ff a2 32 ff f0 44 00 00 ff 00 00 00 00 03 00 00 ff def 00 a2 NA ff f0 MM 00 MM RR 00 00 00 00 02 00 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 00 00 00 00 02 8e 00 ff 00 00 def 01 03 f0 06 02 8e 00 ff 00 00 LDN 0x01 (Parallel port) idx 30 60 61 70 74 f0 val 00 03 78 0c 04 3f def 01 03 78 07 04 3f LDN 0x02 (UART A) idx 30 60 61 70 f0 val 01 03 f8 04 00 def 01 03 f8 04 00 LDN 0x03 (UART B) idx 30 60 61 70 f0 f1 val 01 02 f8 03 00 44 def 01 02 f8 03 00 00 LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 72 f0 val 01 00 60 00 64 01 0c 82 def 01 00 60 00 64 01 0c 83 LDN 0x06 (UART C) idx 30 60 61 70 f0 val 01 03 e8 05 80 def 01 03 e0 04 00 LDN 0x07 (GPIO 3, GPIO 4) idx 30 e0 e1 e2 e3 e4 e5 e6 e7 val 04 ff ff ff ff ff ff ff ff def 00 ff 00 00 00 ff 00 00 00 LDN 0x08 (WDTO#, PLED, GPIO 5,6 & GPIO Base Address) idx 30 60 61 e0 e1 e2 e3 e4 e5 e6 e7 f5 f6 f7 val 01 00 00 ff ff ff ff ff ff ff ff 02 00 00 def 02 00 00 ff 00 00 00 ff 1f 00 00 00 00 00 LDN 0x09 (GPIO 1, GPIO 2 and SUSLED) idx 30 e0 e1 e2 e3 e4 e5 e6 e7 f3 val 02 ff ff ff ff 00 ff 00 00 00 def 00 ff 00 00 00 ff 00 00 00 00 LDN 0x0a (ACPI) idx 30 70 e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 f2 f3 f4 f6 f7 fe val 01 00 01 00 0a 00 00 00 0c 00 09 00 01 00 00 00 00 00 def 00 00 01 00 ff 08 00 00 1c 00 RR RR 3e 00 00 00 00 00 LDN 0x0b (Hardware monitor) idx 30 60 61 70 f0 f1 f2 val 01 02 48 00 81 ff 81 def 00 00 00 00 RR RR 00 LDN 0x0c (PECI, SST) idx e0 e1 e2 e3 e4 e5 e6 e7 e8 f1 f2 f3 fe ff val 00 48 48 48 48 00 00 00 00 4c 50 10 23 5a def 00 48 48 48 48 00 RR RR 00 48 50 10 23 5a LDN 0x0d (UART D) idx 30 60 61 70 f0 val 00 00 00 00 00 def 00 02 e0 03 00 LDN 0x0e (UART E) idx 30 60 61 70 f0 val 00 00 00 00 80 def 00 03 e8 04 00 LDN 0x0f (UART F) idx 30 60 61 70 f0 val 01 02 38 0a 00 def 00 02 e8 03 00 Change-Id: I834f8767b29f3148f353004edb22cfd7db5ddd56 Signed-off-by: Frank Rysanek <Frantisek.Rysanek@post.cz> Reviewed-on: http://review.coreboot.org/3027 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-04-04libpayload, superiotool: README: Prepend `coreboot/` to path of change ↵Paul Menzel
directory line Nico Huber spotted [1], that commit (4d6ab4e2) [1] updating superiotools’s `README` with the Git command line superiotool: Update README with Git repository URL and directory location missed, that after `git clone` one sitll has to change into the cloned directory. So prepend the path with `coreboot/` to fix that. The same error happened in the commit (e1ea5151) for libpayload [2] libpayload: Update README with Git repository URL and directory location and is fixed in this patch too. [1] http://review.coreboot.org/#/c/3019/ [2] http://review.coreboot.org/2228 Change-Id: Ib6e8b678af6276556a40ccfd52ae35ca7e674455 Reported-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3021 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-04-04superiotool: Update README with Git repository URL and directory locationPaul Menzel
Change-Id: I36d980cea5ca9cc67262dba809441091757e1fb5 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3019 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-29superiotool: Allow to override Makefile variables `CC`, `INSTALL` and `PREFIX`Paul Menzel
This way for example a different compiler can easily be used. CC=clang make Change-Id: I50b83554fd4826d00d87e60a30eb1f6a88834397 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2935 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-17superiotool: Add support for the IT8728F Super I/OАндрей Павлов
$ superiotool -d superiotool r4.0-3712-gd549279 Found ITE IT8728F (id=0x8728, rev=0x1) at 0x2e Register dump: idx 02 07 20 21 22 23 24 2b 2e 2f val 00 0a 87 28 01 00 00 40 00 00 def NA NA 87 28 01 00 00 MM 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 val 00 03 f0 06 02 00 00 def 00 03 f0 06 02 00 00 LDN 0x01 (COM1) idx 30 60 61 70 f0 f1 val 01 03 f8 04 00 50 def 00 03 f8 04 00 50 LDN 0x02 (COM2) idx 30 60 61 70 f0 f1 val 00 02 f8 03 00 50 def 00 02 f8 03 00 50 LDN 0x03 (Parallel port) idx 30 60 61 62 63 70 74 f0 val 01 03 78 00 00 07 04 08 def 00 03 78 07 78 07 03 03 LDN 0x04 (Environment controller) idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 f6 f9 fa fb val 01 0a 30 0a 20 09 00 80 00 00 20 00 f0 48 00 00 def 00 02 90 02 30 09 00 00 00 00 00 MM MM MM MM MM LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 71 f0 val 01 00 60 00 64 01 02 08 def 01 00 60 00 64 01 02 48 LDN 0x06 (Mouse) idx 30 70 71 f0 val 01 0c 02 00 def 00 0c 02 00 LDN 0x07 (GPIO) idx 25 26 27 28 29 2a 2c 2d 60 61 62 63 64 65 70 71 72 73 74 b0 b1 b2 b3 b4 b8 b9 ba bb bc bd c0 c1 c2 c3 c4 c8 c9 ca cb cc cd ce cf e0 e1 e2 e3 e4 e9 f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb val 00 f3 10 00 00 00 80 00 00 00 0a 00 00 00 00 00 20 00 00 00 00 00 00 00 20 00 00 00 00 00 01 00 00 40 00 01 00 00 00 00 00 00 00 00 00 00 00 00 21 10 42 00 00 00 00 1c 00 00 00 00 00 def 00 f3 00 00 00 00 03 00 00 00 00 00 00 00 00 00 20 38 00 00 00 00 00 00 20 00 00 00 00 00 01 00 00 40 00 01 00 00 40 00 00 00 00 00 00 00 00 00 MM 00 00 00 00 00 00 00 00 00 00 00 00 LDN 0x0a (Consumer IR) idx 30 60 61 70 f0 val 00 03 10 0b 06 def 00 03 10 0b 06 Change-Id: Ifb45d28005d78b2a99d8552b59154d11bdf44f6f Signed-off-by: Андрей Павлов <7134956@gmail.com> Reviewed-on: http://review.coreboot.org/2775 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-10-03superiotool: Fix for FreeBSDAndriy Gapon
Makefile still used SVNDEF on FreeBSD. Change-Id: I45c7fbc66c33e82a2146ef7df87b63bc7edea4cd Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1554 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-06superiotool: Add support for Fintek F81865F/F-I register dump.Stefan Tauner
Datasheet: http://www.fintek.com.tw/files/productfiles/F81865_V028P.pdf The code was done by Juha Tuomala <Juha.Tuomala@iki.fi> but he refused to sign it off, or commit it for review. I'll commit it anyway with my sign-off because it does not exceed threshold of originality for any copyright. Change-Id: Id86267f5add539b99229f20bbe339bfb5eb20f8b Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/1496 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-12superiotool: Dump data registers for Nuvoton chipsGuenter Roeck
Add support to dump all data registers for Nuvoton chips (NCT6775F, NCT6776F, and NCT6779D). Register contents will be dumped if the -e option is provided on the command line. Change-Id: I2b425b48c1f28a10ff3c1ca1d7f21c501eff74ad Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-on: http://review.coreboot.org/1150 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-12superiotool: Add support for function to dump superio chip data registersGuenter Roeck
Add new function dump_data() to dump a bank of superio data registers. Change-Id: I13a58d87c14d319cfcdea1ec1d54c2b110d90f9f Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-on: http://review.coreboot.org/1149 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-12superiotool: Add support for NCT6775F(A/B) and NCT6779DGuenter Roeck
Change-Id: I66667fcb58f6885460021f4a2024d6ba56b95f11 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-on: http://review.coreboot.org/1148 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-06superiotool: Add support for git-based version numberGuenter Roeck
The superiotool Makefile extracts a version string from SVN. This does not work with a git repository, and results in an empty version string. Use the output of 'git describe' as version string instead. Change-Id: Idf92c02753b28ef5bcdd3b6df4a08d79ae974434 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-on: http://review.coreboot.org/1151 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-10tell superiotool about the ITE 8772Stefan Reinauer
no dumping yet Change-Id: I4e687ca816c8d6d1c95255b0abf6a19513e23f86 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/734 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-01-03Add missing EOT marker.Jonathan A. Kollasch
Omitted from commit 3d1d6bb4ecb15a12f48f871c623882bee9c0c576 Change-Id: Id3e94d615d50f0673cc5e3fde77ed6748d26ebd3 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Reviewed-on: http://review.coreboot.org/514 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins) Reviewed-by: Philip Prindeville <pprindeville@gmail.com>
2011-11-07superiotool: add detection and dump of Infineon SLB9635 TPMJonathan A. Kollasch
Change-Id: If94ea5f45135a4b65bdd37532851fa0ba864bb73 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/421 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-07Avoid false detection of SMSC FDC37N972 when Infineon TPM is presentJonathan A. Kollasch
Change-Id: Ibfb3af4c5d7675a5d4e27021cbb988c2ce00fd9f Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/420 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-03fix superiotool for NCT6776FFlorian Zumbiehl
The current code exits config mode of the NCT6776F immediately after detection, so the register dump shows all 0xffs. This patch adds code to re-enter config mode for the register dump so that the register contents can be read. Change-Id: I4ad0c108b6411a665e31f55dea4b91ca77d1a5f7 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/391 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-01remove trailing whitespaceStefan Reinauer
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-27Add support for AMD IMC controller.Rudolf Marek
This patch adds support to dump SIO like interface of AMD Embedded Controller in the SB7xx and SB8xxx southbridges. Parts of the register interface are documented in SBxxx RRG BDG. Change-Id: Ib2ccaa3dfe33cfa8e7cba19d8ab0798286ad2f92 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/343 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-09-14superiotool: Don't compile with -WerrorMathias Krause
Older libpci version have headers using 'long long' which isn't allowed in ANSI C. Since we cannot control the libpci version installed in the system nor in generall have complete control over system headers, simply skip using -Werror in our makefile. Change-Id: Ibc1e57bef033bf4971f4108d078222dcf168d5e3 Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/210 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-23Add SMSC SCH3114 superio register descriptions to superiotool.Mark Norman
This has been tested on a Aaeon PFM-540I RevB PC104 SBC. Change-Id: Ie02875a1fa2d90d7cc843ce745f727312f7b7aec Signed-off-by: Mark Norman <mpnorman@gmail.com> Reviewed-on: http://review.coreboot.org/43 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-09superiotool: Cosmetics and coding style fixes.Uwe Hermann
Change-Id: Iacda2a9e37635d5cffc5004caf588ef3e5e09b5e Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://review.coreboot.org/18 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 06:03:16 +0000