summaryrefslogtreecommitdiff
path: root/util
AgeCommit message (Collapse)Author
2016-03-05lint-kconfig: pipe stderr to stdout to catch script errorsMartin Roth
Because the perl error messages go to stderr, we were not catching these on the build server. If the script has an issue, we want to know immediately, so change the bash script that calls into the perl lint tool to pipe these to stdout. Change-Id: Ieeec9ccbd59177cfd1859a9738a4ee1fab803d28 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13877 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-05sandybridge/gma_lvds: support both Sandy&Ivy on one boardIru Cai
Sandy and Ivy Bridge processors use the same socket, and a mainboard with the socket can support both types of CPUs. However, they use different native graphics init code for LVDS and cause a crash if running the wrong code. This change detects the CPU type and then selects the right code to run. It will add some more code in ramstage. It also merges the {SANDY,IVY}BRIDGE_LVDS symbol to one SANDYBRIDGE_IVYBRIDGE_LVDS. Tested on a Lenovo T520 with i7-2630qm and i7-3720qm Signed-off-by: Iru Cai <mytbk920423@gmail.com> Change-Id: I4624759f9c92d56d547db1ab4b9a1d611a182a91 Reviewed-on: https://review.coreboot.org/12087 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2016-03-04util/futility: trivial - Add distclean targetMartin Roth
The what-jenkins-does build runs distclean when building the utilities. It doesn't fail the build if distclean fails, but it generates a scary warning. Change-Id: Iac90958951976ed326a89ef2b5f2d9f17f9f2d6b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13888 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-03kconfig_lint: make sure if and endif statements are balancedMartin Roth
In Kconfig files, the 'if' and 'endif' statements need to match up. A file can't start an if statement that's completed in the next file. Add a check as the files are being parsed to make sure that they match up correctly. Change-Id: If51207ea037089ab84c768e5a868270468cf4c4f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13876 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-03amdfwtool: Fix some PSP2 issueszbao
1. Change the function which integrated one firmware, to the function which pushes the whole group. Use fw_table as a parameter instead of using the global table name. 2. Let PSP2 and PSP1 not dependent on the other. It turns out PSP2 can exist without PSP1. For some APU, the PSP directory has to be put in PSP2 field (ROMSIG 0x14). 3. Reserve 32 more bytes in PSP2 header. It is defined by spec. It is tested, and it is true. These above changes are overlapping, hard to split them. Sorry. Change-Id: I834630d9596d7fb941e2cad5d00ac3af04a537b5 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/13808 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-03cbfstool: Use fixed width data types for e820entry struct.Werner Zeh
In e820entry struct, the members are defined using standard types. This can lead to different structure size when compiling on 32 bit vs. 64 bit environment. This in turn will affect the size of the struct linux_params. Using the fixed width types resolves this issue and ensures that the size of the structures will have the same length on both 32 and 64 bit systems. Change-Id: I1869ff2090365731e79b34950446f1791a083d0f Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/13875 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-03cbfstool: Initialize contents of linux_params to 0Werner Zeh
When linux is used as payload, the parameters to the kernel are build when cbfstool includes bzImage into the image. Since not all parameters are used, the unused will stay uninitialized. There is a chance, that the uninitialized parameters contain random values. That in turn can lead to early kernel panic. To avoid it, initialize all parameters with 0 at the beginning. The ones that are used will be set up as needed and the rest will contain 0 for sure. This way, kernel can deal with the provided parameter list the right way. Change-Id: Id081c24351ec80375255508378b5e1eba2a92e48 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/13874 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-03buildgcc: Bump version to 1.36Stefan Reinauer
Numerous changes have gone in since the last bump, let's increase the version. Change-Id: Ie3ae8c24b26bd22b70bc5ddf5c1125b5b1d3a021 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13873 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-03-02crossgcc: add 'urls' option to print urls of all packagesMartin Roth
This should allow the builder to download the packages securely. Change-Id: If5feeff85bd551cbe08849421197d11cc2432d1e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13867 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-02buildgcc: Add 'nocolor' option to remove color codes from outputMartin Roth
When writing to a logfile, the color codes just make things confusing. The --nocolor option will allow these to not be printed. Change-Id: I67645aac20b420ac83b828e77e0e50aab88d3d47 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13866 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-02buildgcc: Use $(CURDIR) instead of $(PWD)Stefan Reinauer
coreboot's top level Makefile does the same, so let's stay consistent. Change-Id: I9e995f3ecadd05d6fbfda64b45dee3a9900d9189 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13869 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-02abuild: Use 12 lines of context for errorsStefan Reinauer
The current default of 6 lines leaves us with no context about the actual error: *** ERROR: 3 warnings encountered, and warnings are errors. coreboot-gerrit/util/kconfig/Makefile:38: recipe for target 'oldconfig' failed make[1]: *** [oldconfig] Error 1 make[1]: Leaving directory 'coreboot-gerrit' Change-Id: I67e7d740e7b3b1c66005dc1bf50557a20bc15428 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/12720 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-02buildgcc: Disable RISC-V GDBStefan Reinauer
Our GDB doesn't support RISC-V yet, so let's disable it for now to keep the build from breaking. Change-Id: Iecc6d97fb16d16410c56965abeea55c67800f220 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-03-01buildgcc: Allow specifying destination directoryStefan Reinauer
With this change you can say $ make DEST=/opt/cross-1.35 to get all of the cross toolchain built and installed to /opt/cross-1.35 Change-Id: Icc3e605c4824bfa2831d030e4ed9dd0331ff722f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13847 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-01buildgcc: Fix building GDB for mipsel-elfStefan Reinauer
Change-Id: I31ed159b13c0da60383068832615c6e4a9608efe Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13849 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-01crosstool: add EXPAT as a dependency on the gdb build.Ronald G. Minnich
qemu-power8 wants to tell about itself with XML, and so we need to build gdb with EXPAT so it can understand XML. Change-Id: I460e27f883956ed5d54e6070916e2682ee0f7a1b Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/13846 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-29buildgcc: Add support for gdb on x86_64-elfStefan Reinauer
Change-Id: I99f5842d1dc03b3f2d747c5abae7170214313284 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13848 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-26nvramtool: Print computed and stored checksum in case of mismatch.Denis 'GNUtoo' Carikli
This is to make it easier to fix checksum issues. Example: # nvramtool -a [...] nvramtool: Warning: Coreboot CMOS checksum is bad. Computed checksum: 0xfa. Stored checksum: 0x0 # nvramtool -c 0xfa Change-Id: Ifacb68b5693afbdfcb521acd6937e270ead85186 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/13770 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-26util: Add a very simple utility to test POST cards.Denis 'GNUtoo' Carikli
It was tested with a mini-PCI POST card on a Toshiba Satellite 1410 laptop with the stock BIOS. Change-Id: Icdc0860e2c72b17862601c2cc59eaf0f3d8a0e54 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/13763 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-24Revert "cbfstool: Silence LZ4 -Wsign-compare warnings"Paul Menzel
This reverts commit 17cb0370a70ccfc2301b7974bf38d44c7271afea. It’s the wrong thing to do, to just disable the warning. The code is fixed for 32-bit user space now in Change-Id I85bee25a69c432ef8bb934add7fd2e2e31f03662 (commonlib/lz4_wrapper: Use correct casts to ensure valid calculations), so enable the warning again. Change-Id: I6d1c62c7b4875da8053c25e640c03cedf0ff2916 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/13772 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-24kconfig_lint: Fix checks when running in taint modeMartin Roth
The builders run perl scripts in taint mode, and some of the checks that the kconfig lint script were running were tainted, causing the script to terminate early when running on the servers. This checks to see if taint mode is enabled, and untaints the path if it is. All external tools (git & grep) must be in /bin, /usr/bin, or /usr/local/bin. This also removes the check for unused kconfig files if taint mode is enabled. Change-Id: I8d1e1c32275f759d085759fb5d8a6c85d4f99539 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13751 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-02-23xcompile: Add parameter to aid in debuggingMartin Roth
There was a report that xcompile wasn't finding the compilers correctly, so to aid in future debugging, this adds a parameter to show what xcompile is doing as it runs. Run from the command line: ./util/xcompile/xcompile --debug Change-Id: I779cb3de7b4e3f62a2ef2a6245c3538be518870c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13047 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-23cbfstool: Silence LZ4 -Wsign-compare warningsJulius Werner
It seems that the exact behavior of -Wsign-compare changes between GCC versions... some of them like the commonlib/lz4_wrapper.c code, and some don't. Since we don't have a well-defined HOSTCC toolchain this slipped through pre-commit testing. Explicitly silence the warning to ensure cbfstool still builds on all systems. Change-Id: I43f951301d3f14ce34dadbe58e885b82d21d6353 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13769 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-23board_status.sh: Allow user to override coreboot image pathDavid Hendricks
Some users may wish to run this script using a coreboot image that does get built in the usual build/ directory, for example if abuild is used to generate the image. Change-Id: I7e98780f8b7b57ebbf3babd6a289f0e4fd4103d8 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/12489 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-22util: Add scripts to download and extract blobsJoe Pillow
This turned out really handy when I tried to build coreboot for my Chromebox. These scripts can be used to extract System Agent reference code and other blobs (e.g. mrc.bin, refcode, VGA option roms) from a Chrome OS recovery image. crosfirmware.sh downloads a Chrome OS recovery image from the recovery image server, unpacks it, extracts the firmware update shell archive, extracts the firmware images from the shell archive. To download all Chrome OS firmware images, run $ ./crosfirmware.sh To download, e.g. the Panther firmware image, run $ ./crosfirmware.sh panther extract_blobs.sh extracts the blobs from a Chrome OS firmware image. Right now it will produce the ME firmware blob, IFD, VGA option rom, and mrc.bin Change-Id: I5fb7e14b10e03e18cd360bc35f1dc92e8ed34e63 Signed-off-by: Joe Pillow <joseph.a.pillow@gmail.com> Reviewed-on: https://review.coreboot.org/13752 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-22cbfs: Add LZ4 in-place decompression support for pre-RAM stagesJulius Werner
This patch ports the LZ4 decompression code that debuted in libpayload last year to coreboot for use in CBFS stages (upgrading the base algorithm to LZ4's dev branch to access the new in-place decompression checks). This is especially useful for pre-RAM stages in constrained SRAM-based systems, which previously could not be compressed due to the size requirements of the LZMA scratchpad and bounce buffer. The LZ4 algorithm offers a very lean decompressor function and in-place decompression support to achieve roughly the same boot speed gains (trading compression ratio for decompression time) with nearly no memory overhead. For now we only activate it for the stages that had previously not been compressed at all on non-XIP (read: non-x86) boards. In the future we may also consider replacing LZMA completely for certain boards, since which algorithm wins out on boot speed depends on board-specific parameters (architecture, processor speed, SPI transfer rate, etc.). BRANCH=None BUG=None TEST=Built and booted Oak, Jerry, Nyan and Falco. Measured boot time on Oak to be about ~20ms faster (cutting load times for affected stages almost in half). Change-Id: Iec256c0e6d585d1b69985461939884a54e3ab900 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13638 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-22board-status: deal with sanitized pathsPatrick Georgi
Change I9dd8e4027be21363015cd8df9918610e206afce2 replaces colons with underscores in paths, to improve compatibility of paths. This breaks any attempt to interpret the timestamp part of the tree as a timestamp, so revert the change before doing so. Change-Id: I0e82e4045120700e9b4fcc8c6e54d761068eaea3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: https://review.coreboot.org/13766 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-21Support arm-linux-gnueabi compilers.Vladimir Serbinenko
Change-Id: I0edbc93807028a091f0f1bcae81a4092538a3422 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13747 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-21optionslist: Don't add a timestampPatrick Georgi
The commit description is enough and this avoids hourly updates of the timestamp by a cron job. Change-Id: I30e9fcf28caf94edbb816c22bc8fbcb7ab09ae6d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13744 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-21board-status: make push-to-wiki more flexiblePatrick Georgi
Change-Id: I952a694f645caf9d9726965e39afc09c6fdce0e3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13741 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-21board-status: move wiki cookiejar elsewherePatrick Georgi
Change-Id: I1240c215f3d6c3934911c096e2ecbabff175d501 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13740 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-20amdfwtool: Postpone the usage of PSP combo directoryzbao
If we only need to "combo" two PSP directories into one image, we can put first address in romsig 0x10 and second one in romsig 0x14. If we really need to put three, the 0x14 is the combo directory which points to multiple level-2 PSP directories. I guess that two PSP can also use combo directory, with only one level-2 directory. But nobody seems to do that. Change-Id: Ic450a846bc04db90a75cd417b6d7104fe2a5b177 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/13739 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-20amdfwtool: Fix some fields in PSP level-2 directoryzbao
Change-Id: Ib2da7f2210a823fce7f05824e2a2b73d3c0490e9 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/13738 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18board_status.sh: Be smarter about cbfstool usageDavid Hendricks
This changes how we build and use cbfstool: 1. If build/cbfstool exists, use it. 2. Otherwise, try util/cbfstool/cbfstool. 3. As a last resort, build it and clean it when we're done. Hopefully this will resolve issues people have had with permissions and reduce overhead of building cbfstool when not necessary. Change-Id: I5de6581ca765e5a8420b101a5865ddd633334b9c Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/12490 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-18board_status: Add script that will set up a ubuntu live imageMartin Roth
This is a pretty basic script that can be downloaded with wget to a ubuntu-based live image, and will set it up so that the board_status script can connect and run cbmem. 1) Verify that this is being run on a ubuntu-based live image by checking for the installer. 2) Install and configure the ssh server. 3) Set a root password 'coreboot' so that root can log in. 4) download and build cbmem. 5) find and print the IP(s) that should be used to connect. Change-Id: I068423c9f5501b156f25371d89559f4a206916b5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13648 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-18Redo testbios utility to use all of YABELStefan Reinauer
Drop buggy duplicate implementation of intXX handlers and provide enough glue to use all of YABEL. Change-Id: I2db77a56a2a991cb84876456dcbb3a843a0d9754 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/12117 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2016-02-18util/autoport: Use common gpio.c for bd82x6xStefan Reinauer
In accordance to change I8bd981c4696c174152cf41caefa6c083650d283a change autoport as well, as suggested by Vladimir. Change-Id: I7cdaa779c11fd3f791a3ad213c24d927b5da76b9 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13731 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2016-02-18crossgcc: Change 'tar balls' to 'tarballs'Martin Roth
Change-Id: I8665724c381c204af5bc8bb06117c8af9c32be8a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13729 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-16lint: Make sure site-local isn't committed to coreboot repoMartin Roth
Change-Id: I1dc9469e3d001fe0d5b0517d45679b056586b5b3 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13556 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-15Fix a build problem with power 8: use --with-system-zlibRonald G. Minnich
Power 8 was once again having build issues. Adding --with-system-zlib fixes them. It seems the builtin one is only needed when you are going to build programs, and it falls apart in other cases. Searching --with-system-zlib reveals this to be a very popular topic. This has not broken other toolchain builds (for me); it should not for anyone else. Then again, this is gcc, about which I need say no more. Change-Id: Ica9d057d88982543b5dda471cc949c31fe15932f Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/13700 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-15kconfig: make oldconfig work "non-strict"Patrick Georgi
oldconfig is regularly used to clean up templates that sometimes contain duplicates or old symbols. Since it cleans up the config, it doesn't need to fail on issues. Change-Id: Ife0e9e3b9bfdde1eb6be0e2e38e81b9042cb7950 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13687 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-13crossgcc: Use acpica-unix2 over acpica-unixPatrick Georgi
Apparently acpica-unix is shipped under "A non-open source license (the 'Intel license')" while acpica-unix2 comes under GPLv2/BSD dual license. (see https://acpica.org/Licensing) So go with unix2. Change-Id: I412812187bbf488eb4ad6d7fb8d2840f2f5e06d4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13686 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12util/cbfstool: Improve heuristic for cbfs header pointer protectionPatrick Georgi
cbfstool has a routine to deal with old images that may encourage it to overwrite the master header. That routine is triggered for "cbfstool add-master-header" prepared images even though these are not at risk, and - worse - destroys the chain structure (through a negative file length), so avoid touching such images. Change-Id: I9d0bbe3e6300b9b9f3e50347737d1850f83ddad8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13672 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12Make MRC vs native a config rather than making a separate chipset for it.Vladimir Serbinenko
Tested by making lenovo x230 configurable despite pretty MRC bugs. Change-Id: Ia2a123f24334f5cd5f42473b7ce7f3d77c0e65b7 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13658 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12util/kconfig: Ignore extra symbols in configs instead of failingMartin Roth
When updating an old .config file that has a symbol that has been removed from the current Kconfig tree, kconfig will generate a warning and fail to save the updated file. This is incredibly annoying, and not the goal when trying to eliminate Kconfig warnings. Instead of generating a warning, just print a message that it's being ignored. This will remove the offending symbol, while allowing the updated config file to be saved. Split the change from 1 line to 3 lines to keep it at 80 characters. Change-Id: I09d5775c9ed14bde80077b51b862a7f41bee098a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13674 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-12bimgtool: Fix printf warning for off_tStefan Reinauer
off_t wants to be printed with %zd, not %d. Change-Id: I3f6e1988bb306f4a7738f1f3ccb2093518e4ceb3 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13655 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-12bimgtool: Match CRC code guardsStefan Reinauer
Make sure that the statically defined CRC functions are enabled by the same conditionals as the code using them. Change-Id: Ic24e2ed1a80b8e5f6623881b08d86f7b608a206e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13654 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12bimgtool: Drop unused targets and variables from MakefileStefan Reinauer
dep has not been defined (and will hence break the build) LDFLAGS is not used. Change-Id: I4f91e1e7a176367aa4e1a1c63a2afc0b3186767e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13653 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-12Merge sandy/ivybridge romstage flow for MRC and non-MRC.Vladimir Serbinenko
Change-Id: I11e09804ed1d8a7ae8b8d4502bd18f6be933f9fa Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13656 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-11util/marvell: Add Marvell doimage utility and dependency in relevant MakefileRuilin Hao
- Add the doimage sources in util/marvell - Add dependency in root makefile - Add dependency in makefile for armada38x soc BUG=chrome-os-partner:47462 TEST=emerge-cyclone coreboot BRANCH=tot Change-Id: I81b30e0865cbd619a41659c3f2819ad3bafc5f24 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4b2a990150580e0b879a346ed8b71b3765b66bab Original-Change-Id: I7e89b5e96206fde97ce69c296850122fd6c858f9 Original-Signed-off-by: Kefei Yao <kfyao@marvell.com> Original-Reviewed-on: https://chromium-review.googlesource.com/318046 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Yuji Sasaki <sasakiy@chromium.org> Reviewed-on: https://review.coreboot.org/13137 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 01:43:10 +0000