From 11f016063fa0d2f8ccf187de693121d16a1e09ff Mon Sep 17 00:00:00 2001 From: Zhuohao Lee Date: Thu, 2 Aug 2018 23:59:16 +0800 Subject: mb/google/poppy/variants/rammus: add rammus devicetree.cb Use the default value for Iccmax which is specified in vr_config.c. The AcLoadline and DcLoadline keep the poppy value. Besides, the USB 2.0 ports located on the mainboard are set to USB2_PORT_SHORT and the others on the daughterboard are set to USB2_PORT_LONG. Those setting need to be fine tuned later. BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: Icabfac04c94b3d480872c243d811509e274ef122 Signed-off-by: Zhuohao Lee Reviewed-on: https://review.coreboot.org/27808 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh --- src/mainboard/google/poppy/Kconfig | 1 + .../google/poppy/variants/rammus/devicetree.cb | 336 +++++++++++++++++++++ 2 files changed, 337 insertions(+) create mode 100644 src/mainboard/google/poppy/variants/rammus/devicetree.cb diff --git a/src/mainboard/google/poppy/Kconfig b/src/mainboard/google/poppy/Kconfig index 2ca0f96cb4..fc090df6ee 100644 --- a/src/mainboard/google/poppy/Kconfig +++ b/src/mainboard/google/poppy/Kconfig @@ -30,6 +30,7 @@ config DEVICETREE default "variants/nami/devicetree.cb" if BOARD_GOOGLE_NAMI default "variants/nautilus/devicetree.cb" if BOARD_GOOGLE_NAUTILUS default "variants/nocturne/devicetree.cb" if BOARD_GOOGLE_NOCTURNE + default "variants/rammus/devicetree.cb" if BOARD_GOOGLE_RAMMUS default "variants/soraka/devicetree.cb" if BOARD_GOOGLE_SORAKA default "variants/baseboard/devicetree.cb" diff --git a/src/mainboard/google/poppy/variants/rammus/devicetree.cb b/src/mainboard/google/poppy/variants/rammus/devicetree.cb new file mode 100644 index 0000000000..78de3caba8 --- /dev/null +++ b/src/mainboard/google/poppy/variants/rammus/devicetree.cb @@ -0,0 +1,336 @@ +chip soc/intel/skylake + + # Deep Sx states + register "deep_s3_enable_ac" = "0" + register "deep_s3_enable_dc" = "0" + register "deep_s5_enable_ac" = "1" + register "deep_s5_enable_dc" = "1" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN | DSX_EN_WAKE_PIN | DSX_DIS_AC_PRESENT_PD" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_B" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x000c0201" + # EC memory map range is 0x900-0x9ff + register "gen3_dec" = "0x00fc0901" + + # Enable DPTF + register "dptf_enable" = "1" + + # Enable S0ix + register "s0ix_enable" = "1" + + # FSP Configuration + register "ProbelessTrace" = "0" + register "EnableLan" = "0" + register "EnableSata" = "0" + register "SataSalpSupport" = "0" + register "SataMode" = "0" + register "SataPortsEnable[0]" = "0" + register "EnableAzalia" = "1" + register "DspEnable" = "1" + register "IoBufferOwnership" = "3" + register "EnableTraceHub" = "0" + register "SsicPortEnable" = "0" + register "SmbusEnable" = "1" + register "Cio2Enable" = "1" + register "SaImguEnable" = "1" + register "ScsEmmcEnabled" = "1" + register "ScsEmmcHs400Enabled" = "1" + register "ScsSdCardEnabled" = "2" + register "PttSwitch" = "0" + register "InternalGfx" = "1" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "1" + register "HeciEnabled" = "0" + register "SaGv" = "3" + register "SerialIrqConfigSirqEnable" = "1" + register "PmConfigSlpS3MinAssert" = "2" # 50ms + register "PmConfigSlpS4MinAssert" = "1" # 1s + register "PmConfigSlpSusMinAssert" = "1" # 500ms + register "PmConfigSlpAMinAssert" = "3" # 2s + register "PmTimerDisabled" = "1" + register "VmxEnable" = "1" + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # VR Settings Configuration for 4 Domains + #+----------------+-------+-------+-------+-------+ + #| Domain/Setting | SA | IA | GTUS | GTS | + #+----------------+-------+-------+-------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 2A | 2A | 2A | 2A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AcLoadline | 15 | 5.7 | 5.5 | 5.5 | + #| DcLoadline | 14.3 | 4.83 | 4.2 | 4.2 | + #+----------------+-------+-------+-------+-------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(2), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .voltage_limit = 1520, + .ac_loadline = 1500, + .dc_loadline = 1430, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(2), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .voltage_limit = 1520, + .ac_loadline = 570, + .dc_loadline = 483, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(2), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .voltage_limit = 1520, + .ac_loadline = 550, + .dc_loadline = 420, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(2), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .voltage_limit = 1520, + .ac_loadline = 550, + .dc_loadline = 420, + }" + + # Enable Root port 1. + register "PcieRpEnable[0]" = "1" + # Enable CLKREQ# + register "PcieRpClkReqSupport[0]" = "1" + # RP 1 uses SRCCLKREQ1# + register "PcieRpClkReqNumber[0]" = "1" + # RP 1 uses uses CLK SRC 1 + register "PcieRpClkSrcNumber[0]" = "1" + # RP 1, Enable Advanced Error Reporting + register "PcieRpAdvancedErrorReporting[0]" = "1" + # RP 1, Enable Latency Tolerance Reporting Mechanism + register "PcieRpLtrEnable[0]" = "1" + + register "usb2_ports[0]" = "USB2_PORT_SHORT(OC0)" # Type-C Port 1 + register "usb2_ports[1]" = "USB2_PORT_LONG(OC3)" # Type-A Port + register "usb2_ports[2]" = "USB2_PORT_SHORT(OC_SKIP)" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_LONG(OC1)" # Type-C Port 2 + register "usb2_ports[6]" = "USB2_PORT_SHORT(OC_SKIP)" # H1 + register "usb2_ports[8]" = "USB2_PORT_SHORT(OC_SKIP)" # Camera + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port + register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | + #| I2C0 | Touchscreen | + #| I2C1 | Trackpad | + #| I2C5 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 190, + .scl_hcnt = 100, + .sda_hold = 36, + }, + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 190, + .scl_hcnt = 100, + .sda_hold = 36, + }, + .early_init = 1, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 190, + .scl_hcnt = 100, + .sda_hold = 36, + }, + }, + }" + + # Touchscreen + register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" + + # Trackpad + register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3" + + # Audio + register "i2c_voltage[5]" = "I2C_VOLTAGE_1V8" + + # Must leave UART0 enabled or SD/eMMC will not work as PCI + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + [PchSerialIoIndexSpi0] = PchSerialIoPci, + [PchSerialIoIndexSpi1] = PchSerialIoDisabled, + [PchSerialIoIndexUart0] = PchSerialIoPci, + [PchSerialIoIndexUart1] = PchSerialIoDisabled, + [PchSerialIoIndexUart2] = PchSerialIoSkipInit, + }" + + register "speed_shift_enable" = "1" + register "psys_pmax" = "45" + # PL2 override 18W for AML-Y + register "tdp_pl2_override" = "18" + register "tcc_offset" = "10" # TCC of 90C + + # Use default SD card detect GPIO configuration + register "sdcard_cd_gpio_default" = "GPP_E15" + + # PCH Trip Temperature in degree C + register "pch_trip_temp" = "75" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB xHCI + device pci 14.1 on end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 on end # I2C #0 + device pci 15.1 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)" + register "wake" = "GPE0_DW0_05" # GPP_B5 + device i2c 15 on end + end + end # I2C #1 + device pci 15.2 off end # I2C #2 + device pci 15.3 off end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 off end # SATA + device pci 19.0 on end # UART #2 + device pci 19.1 on + chip drivers/i2c/max98927 + register "interleave_mode" = "1" + register "vmon_slot_no" = "4" + register "imon_slot_no" = "5" + register "uid" = "0" + register "desc" = ""SSM4567 Right Speaker Amp"" + register "name" = ""MAXR"" + device i2c 39 on end + end + chip drivers/i2c/max98927 + register "interleave_mode" = "1" + register "vmon_slot_no" = "6" + register "imon_slot_no" = "7" + register "uid" = "1" + register "desc" = ""SSM4567 Left Speaker Amp"" + register "name" = ""MAXL"" + device i2c 3A on end + end + end # I2C #5 + device pci 19.2 off end # I2C #4 + device pci 1c.0 on + chip drivers/intel/wifi + register "wake" = "GPE0_DW0_00" # GPP_B0 + device pci 00.0 on end + end + end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 off end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1e.0 on end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 on + chip drivers/spi/acpi + register "hid" = "ACPI_DT_NAMESPACE_HID" + register "compat_string" = ""google,cr50"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E0_IRQ)" + device spi 0 on end + end + end # GSPI #0 + device pci 1e.3 off end # GSPI #1 + device pci 1e.4 on end # eMMC + device pci 1e.5 off end # SDIO + device pci 1e.6 on end # SDCard + device pci 1f.0 on + chip ec/google/chromeec + device pnp 0c09.0 on end + end + end # LPC Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end -- cgit v1.2.3