From 1387b439f125090550ee12fe178e571a1ca40337 Mon Sep 17 00:00:00 2001 From: Gabe Black Date: Sat, 18 May 2013 15:55:47 -0700 Subject: snow: Make coreboot set up pins for busses it knows are hooked up as such Coreboot knows that, for the snow board, certain pins are to be connected to bus controllers in the SOC and to the wires of a bus external to the SOC. It can configure them as such and free its payload from having to know how to set everything up. Change-Id: I1bb127c810e9ee077afc4227a6f316eaa53d6498 Signed-off-by: Gabe Black Reviewed-on: http://review.coreboot.org/3650 Reviewed-by: Stefan Reinauer Tested-by: build bot (Jenkins) --- src/mainboard/google/snow/mainboard.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/src/mainboard/google/snow/mainboard.c b/src/mainboard/google/snow/mainboard.c index 250b71fdee..2dd56fc17b 100644 --- a/src/mainboard/google/snow/mainboard.c +++ b/src/mainboard/google/snow/mainboard.c @@ -176,6 +176,32 @@ static void disable_usb30_pll(void) gpio_direction_output(usb3_pll_l, 0); } +static void gpio_init(void) +{ + /* Set up the I2C busses. */ + exynos_pinmux_config(PERIPH_ID_I2C0, PINMUX_FLAG_NONE); + exynos_pinmux_config(PERIPH_ID_I2C1, PINMUX_FLAG_NONE); + exynos_pinmux_config(PERIPH_ID_I2C2, PINMUX_FLAG_NONE); + exynos_pinmux_config(PERIPH_ID_I2C3, PINMUX_FLAG_NONE); + exynos_pinmux_config(PERIPH_ID_I2C4, PINMUX_FLAG_NONE); + exynos_pinmux_config(PERIPH_ID_I2C7, PINMUX_FLAG_NONE); + + /* Set up the GPIOs used to arbitrate for I2C bus 4. */ + gpio_set_pull(GPIO_F03, GPIO_PULL_NONE); + gpio_set_pull(GPIO_E04, GPIO_PULL_NONE); + gpio_direction_output(GPIO_F03, 1); + gpio_direction_input(GPIO_E04); + + /* Set up the GPIO used to enable the audio codec. */ + gpio_set_pull(GPIO_X17, GPIO_PULL_NONE); + gpio_set_pull(GPIO_X15, GPIO_PULL_NONE); + gpio_direction_output(GPIO_X17, 1); + gpio_direction_output(GPIO_X15, 1); + + /* Set up the I2S busses. */ + exynos_pinmux_config(PERIPH_ID_I2S1, PINMUX_FLAG_NONE); +} + /* this happens after cpu_init where exynos resources are set */ static void mainboard_init(device_t dev) { @@ -186,6 +212,8 @@ static void mainboard_init(device_t dev) }; void *fb_addr; + gpio_init(); + i2c_init(TPS69050_BUS, I2C_0_SPEED, I2C_SLAVE); i2c_init(7, I2C_0_SPEED, I2C_SLAVE); -- cgit v1.2.3