From 391622ae30d36ff6a666892d2da7eba67120a400 Mon Sep 17 00:00:00 2001 From: Alexandru Gagniuc Date: Thu, 26 Dec 2013 02:02:00 -0500 Subject: cubieboard: Keep AHB clock within specs The CPU was clocked at 384MHz in the bootblock, but the AHB bus has a maximum rated frequency of 250MHz. Its clock needs to be divided to keep it within spec. Overclocking the AHB bus hung the CPU when memory was accessed. Change-Id: I7cb9cdd1f126b3d5b0446fc68af79b54946bc2d3 Signed-off-by: Alexandru Gagniuc Reviewed-on: http://review.coreboot.org/4629 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks --- src/mainboard/cubietech/cubieboard/bootblock.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/src/mainboard/cubietech/cubieboard/bootblock.c b/src/mainboard/cubietech/cubieboard/bootblock.c index 90dfd0d458..8899160d45 100644 --- a/src/mainboard/cubietech/cubieboard/bootblock.c +++ b/src/mainboard/cubietech/cubieboard/bootblock.c @@ -15,7 +15,7 @@ #define CPU_AHB_APB0_DEFAULT \ CPU_CLK_SRC_OSC24M \ | APB0_DIV_1 \ - | AHB_DIV_1 \ + | AHB_DIV_2 \ | AXI_DIV_1 #define GPH_STATUS_LEDS (1 << 20) | (1 << 21) @@ -33,7 +33,9 @@ static void cubieboard_set_sys_clock(void) /* Switch CPU clock to main oscillator */ write32(CPU_AHB_APB0_DEFAULT, &ccm->cpu_ahb_apb0_cfg); - /* Configure the PLL1. The value is the same one used by u-boot */ + /* Configure the PLL1. The value is the same one used by u-boot + * P = 1, N = 16, K = 1, M = 1 --> Output = 384 MHz + */ write32(0xa1005000, &ccm->pll1_cfg); /* FIXME: Delay to wait for PLL to lock */ -- cgit v1.2.3